Hi, first of all sorry for my english...
This is my problem: I have a BA Windows Mobile 2003 and I want to use it like a modem for my laptop (using gprs connection).
I read the wiki Blue Angel as USB Modem but something is not working.
My laptop OS is Microsoft Vista. I can see the "HTC USB Modem" in the modem list and the port selected automatically during installation was COM4 and I don't know how to change it if necessary. If I launch the "USB MODEM Dialer" in my laptop i can't see a modem available (Modem: <No USB Modem>).
The BA is connected to the laptop using the USB cradle.
Someone can help me?
Is there a way to connect the laptop using wifi with the BA and use the the gprs connection to reach internet? I tried WMWifiRouter but it is not compatible with Windows Mobile 2003.
Andrea
hello and welcome to the forum, there are several options for you:
- you could try -=HTC Wifi Router=-, which is much better than wmwifirouter, but might not work with wm2003, sorry i can't test that, i use wm6.5
- and that would be the next thing, why not try and use another rom, nobody forces you to use such an outdated OS, try wm5, wm6, wm6.1 or wm6.5, you wouldn't have any problems with incompatible software then.
- or, and that might just be the one you'd pick you make up an ad-hoc wlan connection.
the way to do it is:
1. make sure, your pc has all the drivers needed for wireless lan installed
2. ALL of them, forget windows zero config, when it comes to ad-hoc, install all the nifty little tools, you thought, you could live without, because from now on, you can't anymore.
3. then open the tools and make them the default program for managing wireless communication, so that then, when you take the windows wlan search, it does not search for networks, but says, "some other program is managing wlan, windows can't search for networks" or something similar, then you are right and coming closer.
3.a you might have realized, i can't describe all that in detail. i don't know, your wlan device manufacturer, your native language and many other aspects necessary to describe with more detail.
4. on your pc, go to "network connections" right click your wireless device and go to properties.
5. select TCP/IP v4 and click settings
6. set it on manual and choose the following, from top to bottom:
ip 192.168.1.101
snm 255.255.255.0
gw 192.168.1.1
dns 192.168.1.1
adns 192.168.1.2
7. go to your device and call up start->settings->connections->network cards, go to the 2nd panel, select the tiaxclwlan(or something like that) and set the ip config on manual and use these settings:
ip 192.168.1.1
snm 255.255.255.0
gw 192.168.1.1
dns 192.168.1.1
adns 192.168.1.2
8. having all these things set, you can now start your ad-hoc wlan on your pc, using the manufacturer's tools, which should provide you with an option to set up a new ad-hoc
9. select encryption wep and choose a key according to the regulations of wep keys (13 numbers are just fine i believe)
10. take your BA and start looking for wlans in range, make sure "all networks" is selected, and NOT "just accesspoints"
11. as soon as the network is found, connect and enter the key you picked in 9.
12. as soon as you are connected your gprs connection should be shared with the pc. since i am not an expert when it comes to gprs and i don't have my device with me, because i am at work and just can't re-create the conditions, i had to write this all by heart, maybe there are some inaccuracies, but, as always, there are small things to be determined by intelligent guessing or googling
nice work by the way, making your first post this hard to answer, because you looked up things yourself in before.
with best regards,
Chef_Tony
Post deleted,
double post
Thank you (a lot) for the long answer!
1) -=HTC Wifi Router=- is not working on WM 2003, i already tried before.
2) (try wm5, wm6, wm6.1 or wm6.5): i will do it in the future, but I need a fast solution in one/two days. I will try with wm6.5 after holidays
3) I followed what you suggested (not only the nifty little tools, I don't know what they are and where they are). At the end of all I have the laptop and the BA connected wireless, but I can't open gprs connection on the BA. To do it, i usually opened a web page with IE, but if i do it now, IE will try to find the page using wi-fi connection and not trying to open a gprs connection.
The edit button in the forum is not working, so i write another post:
if i go to "Wireless manager" i can connect to gprs and i can see the gprs button green. Then i go to "Wireless LAN management" or something similar (i don't know because I have an italian OS) and i click on "Wireless lan actived" to connect to the laptop. If I go back to Wireless manager i can see the gprs button becoming red and the wlan button becoming green. And i lose the gprs connection.
that is too bad, as mentioned before i am not an expert on gprs, in fact i never used it before, because it is hellishly expensive but i used the other way around often, connect via ad-hoc wlan to a pc, connected to the internet by lan, i even connected to a wlan router once that was not connected to the network, but another client pc, connected to the internet via lan and connected to the router allowed me to go through the router and then through the pc to the net, that was neat, those things are, where i recalled the ad-hoc informations, who would have guessed the BA was as "smart" as preferring the free and faster connection. there must be a way to force it!
i will continue to think about it and hope more senior members have a look into this and maybe advise you on how to do it (although i have to admit, at this point i believe, before a solution is found, more than one or two days might pass by, which makes upgrading a faster alternative again )
Thank you Tony. Tomorrow i will leave home for holiday, and without solution i will be disconnected from internet for 15 days... but when i'll be back i will try to upgrade the operative system.
If someone will be able to give me a hint for my problem... i remeber you that I will go in holiday tomorrow, not exactly now....
Related
Is there a way to disable the internet passthrough in activesync? I use a remote software that allows me to use my phone on my PC when docked, SOTI pocket controller. So I like being docked at work, however (this is where this question gets weird)... my work has disabled the port to access MSN messenger on our network, I want to be able to sign in from time to time so I thought using my PPC would be great! However the internet passthrough in active sync means that it won't access the MSN messenger port either, because it's using the same network, so if I undock and connect using GPRS I can use messenger, so what I want to do is be docked still but have my device use GPRS internet instead of the passthrough, this way I can sign on to messenger while docked. Does this make sense? Respond if I'm not being clear enough. I have found web versions of messenger that work, it's just too slow for me and gets in the way, if I could use my PPC it would be just perfect! Thanks in advance, it's a weird one so hopefully someone will have a suggestion that will tickle my fancy out there!
I would like to know the answer to this as well. I have GL installed and cannot retrive new messages while my SX66 is docked.
As much knowledge as there is out there, this one seems to have the experts stumped.
Lots of people asking the question on the net and no answers.
I'm surprised no one has replied to this yet.... It's actually pretty easy to fix. Right click the ActiveSync icon in your tray and click connection settings, change "this computer is connected to" from 'the internet' or 'automatic' to work network. Your phone should no longer look for a connection through AS on these settings.
Doesn't work for me. The wireless data connection is immediately terminated on the phone once the USB cable is plugged in, regardless of how the XP ActiveSync software is configured.
That's rather odd, I used to do just that to make my AIM go through my phone rather than the computer while using MyMobiler.
gboybama said:
As much knowledge as there is out there, this one seems to have the experts stumped.
Lots of people asking the question on the net and no answers.
Click to expand...
Click to collapse
have you tried the 'This computer is connected to:' and select 'Work Network', in the Connection settings dialogue box?
edit1: wow, typed this weeks ago, Google chrome saved the page till today...
edit2: on your phone, In connection settings in My Work Network, under the Proxy Settings tab, is 'This network connects to the internet' ticked? try un-ticking it if it is...
Work or "The Internet" it doesn't matter what I select on ActiveSync. It still disables the H on my phone as soon as I connect the USB cable.
For connections on my phone, all I have even in the list of connections is MEdia Net. I can't uncheck Internet there or else I wouldn't get Internet while disconnected.
Despite the fact that my only existing connection on the Settings/Connection page is MEdia Net and that only is set for "Cellular Line (GPRS, 3G)" I still can only access the Internet through my work server when connected to my work desktop.
I noticed the same behavior when syncing via Bluetooth. As soon as the connection with ActiveSync is established, wireless connectivity is shut off.
My apologies for the kick, but if someone knows the aswer, please enlighten me!
I cannot disable the internet pass-through either, not even when I select "Network (work)" in "This computer is connected to" in the Windows Mobile Device Center (The Vista version of ActiveSync).
I have set-up Exchange on my phone, which connects to domain.com. My Exchange server runs in my network, so when I connect the phone it should connect to 192.168.1.2 instead of domain.com. If it would stay on HSDPA, then the connection would remain OK. Because of this, it won't sinc with my PC either, because it keeps hanging on connecting to ActiveSync (of which the server cannot be resolved).
Many thanks to the person who knows the answer!
This thing is a bigger pain than it should be, that's for sure. I think I got it working - simultaneously syncing via Exchange over GSM and locally through USB (obviously not the same items).
In my setup Contacts, Calendar, E-Mail, and Tasks are using the mobile network to connect to our Exchange server's external Push interface. Notes, Mobile Favorites, Files, and OneNote are syncing through USB or Bluetooth (I tried both) when I connect locally.
I'm currently running Vista on this PC so things might be different on XP or Windows 7. On the PC in Windows Mobile Device Center I enabled "Allow data connections on device when connected to PC" and changed "This computer is connected to:" Work Network.
In Windows Mobile, in the connections manager, edit the existing connection. MEdia Net shouldn't have a proxy set and under the Advanced tab click Select Networks - if the "Programs that automatically connect to a private network" is set to My Work Network then make sure and edit the settings to have "This network connects to the Internet" unchecked. Or alternatively, just change the private network to be Media Net as well. That should do it.
On your pc if you open up ActiveSync and go to file>connection settings and make sure "allow wireless connection on device when connected to the desktop" is checked you should be able to keep your mobile internet connection up while still connected to a pc.
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
Hi All,
I have a problem with the wireless connection on my Orbit.
When I try to connect to the internet the first time via my router I am assigned an ip address via DHCP and everything works fine. After I have left the device for a couple of minute and try to connect to the internet I just get the message Locating from the internet explorer and it will not connect to the internet unless I reboot.
I have tried the following to try and resolve.
Assign Static IP Address and DNS Servers
Removed all Encrytion and Mac Address filtering from the router.
I have tried to stream internet radio to see when it drops the connection.
Tried continuously pinging the router deafult gateway.
Disabled powersave options.
I would like the device to always stayed connected so that I can send and recieve Skype calls
Has anyone else experience this problem ?
I have exactly the same problem with you (my device is the HTC P3300) and I have tried everything you mention -apart from the ping and streaming audio - but no effect whatsoever.
I suspect that the problem lies with my wireless modem-router (USRobotics 9108) but I have yet to find something useful for it. Others I have asked have no such problem.
Someone mentioned that in "my network connects to" in the wireless network adapter settings we should check "Work" instead of "The internet". Haven't tried that yet though.
Do you have the same problem with other types of internet connection e.g via usb?
USB and GRPS work fine! It is just the wireless that has the problem, it seems like the device is loosing it's connection to the router even though it retains an ip address. When you try to ping from the phone to the router you get timeout request.
Even when you release and renew the ip address it still will not work, the only way I have found to make it work is either to reboot or turn the wireless off then back on.
I just wonder if there are any timeout values that shutdown the wireless connection after a certain amount of time?
Some remarks...
I used Media player with streaming audio via wifi and guess what? It didn't stop a couple of minutes later as I expected but kept playing for 15-20 mins. The P3300 was on power supply all the time. Then I quit from Media player and browse the net for a while. After about 5 mins... here we go again. I beleive that IE has some kind of counter that when exceeded (data, time?) it stops connecting. The funny thing is that afterwards neither media player streams nor skype worked.
On the other hand I tried skype on a new session without ever opening IE and guess what? It worked like a charm for about an hour... It never stopped responding. Now what do you make out of this?
I thought it may be IE causing the problem so I installed Netfront 3.3.
Same problem! I don't think it is the browser causing I have the same problem with Netfront.
When the connection goes I use pocket lan to ping from the phone to the router and do not get a reply.
The fact that we can stream music/video and use skype for long periods of time with out problems leads me to believe that once you initiate a constant outbound session from the phone to the router it is fine but as soon as disconnect this session this is when the problems start.
I think there maybe a registry setting for the wireless card may need changing.
I will check later and post my findings....
Any luck with our problem?
Could it be a ram allocation thing to do with IE? As I don't seem to have this problem with the WIFI but I do find that my orbit slows down to an unacceptable rate during IE use or until I use space reclaimer etc.
JC#79 said:
Could it be a ram allocation thing to do with IE? As I don't seem to have this problem with the WIFI but I do find that my orbit slows down to an unacceptable rate during IE use or until I use space reclaimer etc.
Click to expand...
Click to collapse
I don't beleive so, because my P3300 is working as it should except that it won't download any pages after a while. If I check RAM afterwards is pretty much acceptable. The machine will not slow down at all it just stops downloading as if the connection is broken (but its not).
make sure under settings/connections you have a a setting called MY ISP, if not then make a new one.
then go to settings/connections/advanced and "select networks", make sure BOTH say using "MY ISP"
then go to settings/wifi and click on network adaptors and make sure it says "my network card connects to the internet
Voila all problems solved !
hb328_dtdd said:
make sure under settings/connections you have a a setting called MY ISP, if not then make a new one.
then go to settings/connections/advanced and "select networks", make sure BOTH say using "MY ISP"
then go to settings/wifi and click on network adaptors and make sure it says "my network card connects to the internet
Voila all problems solved !
Click to expand...
Click to collapse
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
go to manage connections/add new
Thx for info, I figured it out...
no problem m8. any other problems give me a shout, I have only had the Orbit for around a week but have sussed most of the problems out including loop resets etc.
vaggoul said:
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
Click to expand...
Click to collapse
Even I havent found something like My ISP and tried but could not create one...
After connecting to WIFI when i use i-net, it starts with GPRS... similar to the problem explained above..
hb328_dtdd, could u please help...
vaggoul said:
I certainly don't have "MY ISP" !!!!
How can I add one? the only thing I can see in this screen is "internet" in bold and below "add new modem connection", "add new VPN connection", "Proxy server...". When I choose "add new modem connection" it asks for my modem type (GPRS, irda, bluetooth, COM1) and afterwards "call number" and such...
Which one should I choose for MY ISP?
I think that there used to be a "MY ISP" but I must have erased it...
Click to expand...
Click to collapse
Even I havent something like My ISP and tried but could not create one...
After connecting to WIFI when i use i-net, it starts with GPRS... similar to the problem explained above..
hb328_dtdd, could u please help...
I'm having trouble and can't figure out how to do the setting for the internet. Can anyone post a step by step guide on how to do it? TIA
When u say settings for the internet do u mean for wifi?
Yes, I mean for wifi
First of all read the manual. Or try the following. If all fails try to be more specific about your problem.
1. Make sure wireless network is up and running.
2. Press Comm Manager and press wireless icon.
3. Usually it scans automatically for nearby networks
4. If a network is found is announces the network's name and if a connection is desired.
5. You enter password (WEP, WAP, or whatever u have)
6. Connection established.
It is recommended to use in "start>settings>wireless network>power" the slider in "better performance" setting. Leave others as is.
Tip: if u open Internet Explorer before a connection is established (check for the apropriate icon) then it connects automatically with GPRS.
Network/Connection/Communication Manager for my HTC Artemis/XDA Orbit
I've got a problem with my device's connection Manager in Setting/Connection/Connection. I am able to add any connections using ISP, GPRS, bluetooth... but can only use the last one added. I have no facility to manage these connections or switch between these (this is rather strange, I've always been able to manage this on my previous devices).
I am therefore left confused with this. I have tried to download a communication manager, but this one did not work.
Any ideas from anyone?
Please reply
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link