when i try to connect my phone to my pc it doesnt do anything, everything else works but my phone, my other friend who has the same phone as mines works well and sync, im using the final release of 6.1 from kavana.
so is there anyway i can try to reinstall windows mobile on it without a pc?
its been restarting and rebooting it self a lot.
thanks.
crazyasslatino said:
when i try to connect my phone to my pc it doesnt do anything, everything else works but my phone, my other friend who has the same phone as mines works well and sync, im using the final release of 6.1 from kavana.
so is there anyway i can try to reinstall windows mobile on it without a pc?
its been restarting and rebooting it self a lot.
thanks.
Click to expand...
Click to collapse
Try to look through this thread.
http://forum.xda-developers.com/showthread.php?t=534725
Seems to be some things in there that might help answer most if not all of your questions.
Try to uninstall activesync and reinstall on your computer, its usually solves any problems I have with it.
Related
Once arrived to 100% it disconnects the activesync and the screen on the p3300 appears black as it says in the manual. Then I can't make the connection again so I can't transfer the ROM. Can anyone help me?
I have tried a lot of times and read a lot, I have also updated actvesync from 4.2 to 4.5, but still the same.
Thanks,
Without disconnecting run USPL again and see if it helps. If not reset your device and look and see what the SPL version is. If it is 1.11.0000 then it has worked and you can flash the new ROM.
I had the same problem with my P3300 and I found a solution under Windows Vista on this forum (you can find the link in the wiki xda)
http://www.forummobiles.com/index.php?showtopic=139079&st=0&p=1399080&#entry1399080
The only thing, is that's in french...
Maybe you will find some equivalent thing under XP. The tip is to upgrade the driver of the mobile device once USPL is loaded 100%.
I hope this will help.
planagan said:
Once arrived to 100% it disconnects the activesync and the screen on the p3300 appears black as it says in the manual. Then I can't make the connection again so I can't transfer the ROM. Can anyone help me?
Click to expand...
Click to collapse
Seems perfectly normal to me... I think you are not patient enough. It can take quite some time, whatever you do, don't disconnect the usb cable, sit on your hands and watch the phone resets itself. After that a new ActiveSync connection is made, then you can start with the ROM update.
It can also help to disable your AntiVirus and firewall software temporarily, during the flash sequence.
Had this problem too. killed the firewall what worked for me!
Had this problem too. If you are trying to install a cooked ROM run first "clear storage" program (settings/system)
So im trying to connect my dash so i can install windows 6.1 kavana, currently running the rose 6.5rom i believe. So when i go to hook it up to my pc nothing comes up its as if the phone was not connected at all, now i was thinking should i hard reset and then try to install, or what can i do?
ok did the hard reset that didnt do much but reset it, anyway i can get it so it shows up on my pc as connected so then i can re-flash?
Have you gone into the USB settings and unchecked the "Advanced Functionality" setting? After you've done that, you should be able to form a relationship between your pc and Windows Mobile Device Center or Activesync depending on what Windows OS you're using.
yea i did that still doesnt connect comes up as generic device asks for a driver and since i dont have one it says device not installed correctly, also noticed i couldnt sent mms messages.
nvm got it working with a little bit of searching
redg2 said:
nvm got it working with a little bit of searching
Click to expand...
Click to collapse
What was your solution? Thanks.
You probably had to disable the sdcard, if you have one I assume.
It was dumb but i had to install active sync since i forgot to install that after the format of my pc and for the MMS i had to go into the connectivity menu and set it up for tmobile, all working perfect now..only if i could get better signal though, anyway of just installing an update for the radio?
redg2 said:
It was dumb but i had to install active sync since i forgot to install that after the format of my pc and for the MMS i had to go into the connectivity menu and set it up for tmobile, all working perfect now..only if i could get better signal though, anyway of just installing an update for the radio?
Click to expand...
Click to collapse
Not really. Don't know where you live but signal is 90% of the times dependent from your carrier. Unless you have a RAZR, than its your phone not picking up much.
Hello,
I've HTC Desire with LeeDroid rom, once i enable usb tethering, the modem appears in windows 7, then after seconds time, going away/removed by it self. So cannot surf at all using it.
How to solve it? i even tried reflash same rom....
HTCSync installed too...
Thanks!
rommark said:
Hello,
I've HTC Desire with LeeDroid rom, once i enable usb tethering, the modem appears in windows 7, then after seconds time, going away/removed by it self. So cannot surf at all using it.
How to solve it? i even tried reflash same rom....
HTCSync installed too...
Thanks!
Click to expand...
Click to collapse
Its now actually connecting for few seconds, then the modem gone again...
Yup, I saw this issue a few days ago when I tried hooking it up to my desktop. It did the same thing. So I WiFi tethered the phone to my work laptop instead.
Not sure why his happens.
I have this issue too (with 2.3d). Solutions right now?
Just yesterday my computer stopped recognizing my phone. As this tends to be a big problem for me as I transfer a lot of files to and from my phone and computer a lot. I can't seem to figure out what the problem is. I've tried rolling back to the pre-updated driver that originally came with the phone. That didn't work. I also tried uninstalling and reinstalling and that didn't work either. I am running windows 7 home on this computer. Does anybody have any ideas?
ScottPomroy said:
Just yesterday my computer stopped recognizing my phone. As this tends to be a big problem for me as I transfer a lot of files to and from my phone and computer a lot. I can't seem to figure out what the problem is. I've tried rolling back to the pre-updated driver that originally came with the phone. That didn't work. I also tried uninstalling and reinstalling and that didn't work either. I am running windows 7 home on this computer. Does anybody have any ideas?
Click to expand...
Click to collapse
I have been having the same problem with mine, I am going to keep trying different solutions, but I think it may be a phone problem since I can not get it recognized under mac or linux either.
hey guys after i installed windows 10 mobile build 10586.63 every time i connect to my wifi it says no internet access
Note: i tried to hard reset my phone but the problem still continues
also every device in my home works fine with it and i changed the router and reset it but it cant connect ! Same message appears !
any one facing this problem or any solution ?
Thanks guys
same
Have AdBlocker_Release_ARM_V5.3.xap installed? Tryed to restore hosts file, no succes, reflashed to 8.1 and updatet to wm10. Is the fault of hosts file.
augustinionut said:
Have AdBlocker_Release_ARM_V5.3.xap installed? Tryed to restore hosts file, no succes, reflashed to 8.1 and updatet to wm10. Is the fault of hosts file.
Click to expand...
Click to collapse
i returned to 8.1 but nothing :/
M_Zero0_2015 said:
i returned to 8.1 but nothing :/
Click to expand...
Click to collapse
Same here but after returning to 8.1 try to hard reset it will restore the WIFI...since that's what I have done.
If anyone can find the source of the problem and have a solution plz reply as hard resetting the phone is a bothersome to do
Ghoul159 said:
Same here but after returning to 8.1 try to hard reset it will restore the WIFI...since that's what I have done.
If anyone can find the source of the problem and have a solution plz reply as hard resetting the phone is a bothersome to do
Click to expand...
Click to collapse
after i reset my phone nothing changed :/ the problem continues
You reflashed the phone or hardresetit?
M_Zero0_2015 said:
hey guys after i installed windows 10 mobile build 10586.63 every time i connect to my wifi it says no internet access
Note: i tried to hard reset my phone but the problem still continues
also every device in my home works fine with it and i changed the router and reset it but it cant connect ! Same message appears !
any one facing this problem or any solution ?
Thanks guys
Click to expand...
Click to collapse
Ive been having the same problem on windows 10 mobile. Its ok though. Just leave the wifi connected and it should eventually work (3-5 minutes)
HOSTS file to large?
http://forum.xda-developers.com/showpost.php?p=64764112&postcount=100