Related
Could someone give be a brief run down of the case types and attributes. Things like how thick they are, grip levels, impact protection, etc. I've seen tons of jell cases but not sure how jell compares to silicone or tpu and others.
ok theres Silicone cases which are really grippy often flimsy and fit phones kind of loose, they offer really good protection but get stuck in your pocket and attract a **** load of lint, and also because they dont fit tight they let a lot of lint and dirt in between the case and phone
theres hard plastic cases. they come with the grippy matte(rubbery) like material that a lot of like HTC phone use on their back covers, and they also come painted with all sorts of designs and in solid colors and also come in clear, and transparent colors(like smoke and all the colors of the rainbow), these protect your phone very well but the downfall is dirt and sharp edges.
most of these cases are a bit of a ***** to get on and off and most people leave them on for a long long time only to find out that dirt and lint got in between the case and phone and left horrible rub marks all over the phone, not to mention that while flexing and moving the case tends to scratch the contact points on the phone also.
then theres my favorite Gel/Jelly/Crystal/TPU all of which are the same they are a hard rubberish case that in most cases are easy to remove and put on and fit the phone like a glove (not leaving a lot of room for dust and dirt to get in) not meaning that dirt doesn't get in but its minimal when compared to the other two types of cases. they protect your phone just as well as any other case, have moderate grip (not too grippy like the Silicone and not too little grip like the hard cases) i compare the feel to kind of like the invisible shield "kind of grip" they come in solid colors and in clear tints
Ive bought all of these cases before on multiple phones (G1, Mytouch, Nexus, HD 2) and I have given all of these a chance and no matter how many times i buy a hard case or a silicone case i always end up with a Gel/TPU case, they fit great add the least amount of bulk out of the three and have saved all of my phones from concrete and tile drops multiple times (almost **** my pants when i did it with my Nexus and HD2 though )
with all these cases your going to have to remove the case every once in a while to get the dust out that gets in between the case and phone (unless you like scratches on your phone) thats the common downside to all of these cases but in return you have the security that you wont crack or damage your phone and it will last you
Great write up, thanks.
So is there little difference between the Gel/Jelly/Crystal/TPU? Reason I ask is that I have the t-mo jell case right now and find it makes the phone too big. I am willing to lose some protection to get something a little thinner and did not know if one of the other materials would be a better fit.
I actually found that the T-Mo case is one of the better ones out there. It it not your normal flimsy rubber gel like I had with my HD2, but fits very snuggly and actually adds a little bit of weight to the phone, which makes it feel a little more solid. (once again, coming from an HD2 that was metal).
There are a couple of other threads about the cases, but most of them say the T-mo case is one of the better ones right now. Because the phones are new, there is not too much in the way accessories at this time.
dmtaub said:
I actually found that the T-Mo case is one of the better ones out there. It it not your normal flimsy rubber gel like I had with my HD2, but fits very snuggly and actually adds a little bit of weight to the phone, which makes it feel a little more solid. (once again, coming from an HD2 that was metal).
There are a couple of other threads about the cases, but most of them say the T-mo case is one of the better ones right now. Because the phones are new, there is not too much in the way accessories at this time.
Click to expand...
Click to collapse
that sounds kind of what i am looking for. so do they just have this one at t mobile stores? or are there several that i need to try to see which is which? the one you are describing, its not flimsly like those silicone gels?
also, what screen protector do you reccommend? I know there are other threads, but it sounds like you have tried many.
not trying to thread jack
kboater said:
not trying to thread jack
Click to expand...
Click to collapse
Damn thread jackers... I kid.
Just an FYI and I know lots of popel love the t-mo case. Some pics to show how it increases the size of the phone. You can see a vibrant t-mo case, naked and G1.
i played with the one my tmo store had when i purchased my phone and it seems way more sturdy and better quality than most (I hated the one that came with my HD2 that ***** was flimsy as hell) my only gripe with that case is the fat lip around the edge of the screen, other than that i like it, but TPU cases IMO add the least amount of thickness heres some pics to clear up names between the different type of cases
Heres a Silicone (like the one at the T-Mo store) T-mo's is way better in quality though
http://cgi.ebay.com/BLACK-SILICONE-...ewItem&pt=PDA_Accessories&hash=item43a077b6a9
heres the TPU/Gel/Jelly/Crystal/Hard Rubberish stuff
http://cgi.ebay.com/2-x-TPU-Case-Fi...AU_MobilePhoneAccessories&hash=item3caf486870
http://cgi.ebay.com/1-Silicone-Gel-...t=LH_DefaultDomain_0&var=&hash=item84b70ce076
I think Im about to take a plunge for a Galaxy S version since its been somewhat verified that it fits the Vibrant
Soooooo... theres also hybrid cases lol that mix both TPU and Silicone and that Mix hard Plastic and TPU
Hard Plastic and TPU
http://www.youtube.com/watch?v=3QhIb8OT9zI&feature=channel
Silicone and TPU
http://www.youtube.com/watch?v=sIi9cbm7HxU
to explain the differences in TPU, SILICONE and PLASTIC
TPU means Thermoplastic Urethane/Polyurethane BTW in case anyone was wondering (Sorry i just found out lol)
oh yeah and Silicone means BOOBIES lol
SykesAT said:
Damn thread jackers... I kid.
Just an FYI and I know lots of popel love the t-mo case. Some pics to show how it increases the size of the phone. You can see a vibrant t-mo case, naked and G1.
Click to expand...
Click to collapse
that looks really nice and protective. does look like it adds some size though. I think im going to check it out as I really want something right now and dont want to wait form something to ship from hong kong off ebay.
i know, off topic, but what screen protector are you using in the pics? do you like it? I know in the other thread people recommned the somthing freak, but I dont love the idea of putting water all over my new phone. Most say the protectors from tmobile store are dull and dull down your screen...
kboater said:
that looks really nice and protective. does look like it adds some size though. I think im going to check it out as I really want something right now and dont want to wait form something to ship from hong kong off ebay.
i know, off topic, but what screen protector are you using in the pics? do you like it? I know in the other thread people recommned the somthing freak, but I dont love the idea of putting water all over my new phone. Most say the protectors from tmobile store are dull and dull down your screen...
Click to expand...
Click to collapse
I still have the ones that came on the phone... Still trying to determine what to buy... given myself till the end of the week to decide.
On my G1 I use bodyguardz. I really liked it but two years have passed so I wanted to see if there was anything else that people liked. I would be happy to get bodyguardz again.
Gel/jelly are the same as silicone cases (soft)- not the same as crystal/TPU cases (a bit harder).
-bZj
_____
-sent from my Samsung Vibrant via XDAapp
YOU DONT KNOW ****!!!!!!! lol j/k ok lets just call it TPU and Silicone to keep it simple
just ordered my TPU case with 3 screen protectors (you know since i have 3 screens) and three wipe cloths (in case i forget my hanky?) as you can see in the description its a "Silicone" TPU case, it must be a hybrid case? lol j/k Ebay descriptions misinform everyone
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280537757969&ssPageName=STRK:MEWNX:IT
when i "Google'd" Gel case and Jelly case and clicked on "images" a whole **** load of TPU cases came up BTW
^^^ that's what got me kind of confused cause eBayers can list their products as multiple materials and only when you get in and read the fine print does it clarify what it is exactly. I was about to buy the exact one you bought but the buy it now price jumped to $43 as I was going though the checkout process...
thanks for everyone's help with this. Last night I bought a cheapy (link) to hold me over till there are more options.
finally went to the t moble store and got their case. its the same as the one a few posts back that has pictures. I do like it, but wish it fit just a little more snug. im coming from a mytouch that had a snap on hard shell, so im used to them fitting tight. this will do for now. thanks for the info
now, guess ill order the clearfreaks screen protector from ebay... not thrilled, but dont see to many other "good" options at this point
is it true that the silicon type of cases doesnt allow the heat to dissipate and heats up the device ?
Anyone have a suggestion for what kind of case will give me the rubberized feel that the HTC phones have (their backplates). Or if you can't think of a specific case, what kind of material I should be looking into>
I don't want a gel case I think cause its too rubberish and stick and hard cases are just bad. What's a good mix in-between?
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=729133
Just look down before you start a new thread.
I did read all of that before posting. Unfortunately I am looking for a full-fledged case, not a skin or coat I put on the phone. I want something that will protect the phone from a full drop which is not a gel or hard case.
I have this one, it's a hardcase with rubber coating similar to G1, plus perforated holes for better grip. Best looking case in the market at the moment IMO.
"Mesh" case for i9000
http://forum.xda-developers.com/showthread.php?t=730699
vuvsion I have been following the forum very closely. I know of these cases and was considering getting one for the LONGEST time. They DO look great. But if you drop it, your phone is ****ed. It doesn't cover the edges. I don't really care its backplate (i can replace that easy enough). The sides though, are not replacable.
The mesh case covers the back but not the edges. It's pretty but not drop-proof. Do you know of anything LIKE it that covers more of the phone. Cause that would be perfect.
Perhaps one of the case-mate cases would have that same feeling, but since it's still in design stage, it'll take awhile for them to release anything.
Do you know if Case-Mate is even working on a model for the Vibrant/Galaxy S? I just looked at their site and they have VERY few cases for past Samsung phones.
}{Alienz}{ said:
Do you know if Case-Mate is even working on a model for the Vibrant/Galaxy S? I just looked at their site and they have VERY few cases for past Samsung phones.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=7497121&postcount=23
Yup saw that like 3 minutes after posting. Voted on their case-mate forum too. I just hope it doesn't take a month for them to be out.
The body gloves are quite nice
Sent from my SGH-T959 using XDA App
http://www.amazon.com/Impact-Resist..._1_5?s=wireless&ie=UTF8&qid=1319246803&sr=1-5
Im looking for a cheap decent case till trident releases the agies version, and this one looks to be the cheapest but yet decent, because it will has a drop resistant in it. i dont wanna spend 35 bucks on the case-mate tough due to gonna get the trident case when it comes out.
i liked it but i did not get one so i dont know how it is
majmuni said:
i liked it but i did not get one so i dont know how it is
Click to expand...
Click to collapse
i like the kickstand idea of it, from the reviews it sounds ok, just the top and bottom are not well protected, just the corners.
They sell this case at the sprint store. so i would go there first and check it out but this is a way better deal then they have.
My local Sprint store also carries this case. I didnt buy it cause it really looked bulky.
atoy74 said:
My local Sprint store also carries this case. I didnt buy it cause it really looked bulky.
Click to expand...
Click to collapse
I dont mind bulk really. i figure with big hands, that might help me a little because this phone i thin.
Scratches phone
Read my post here about this case...
http://forum.xda-developers.com/showthread.php?t=1292459
Not everyone has troubles with it but I wouldn't trust the case if I dropped it. I ended up buying one of these from eBay and it provides way more protection with little bulk...
http://www.ebay.com/itm/180729129853?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_1480wt_1341
No kickstand but it's worth it till I find something better. Only took 6 days to receive it.
The problem I've got with most cases, is that it looks like "a phone snapped into a case". And having a flippy kickstand out the back adds some functionality, but if you don't need or wouldn't use that functionality, it contributes all the more to that "that doesn't look like it belongs there" look. Looks a bit like you've taken half your windshield mount with you.
It's like those cars you see college kids driving around, with the stuff bolted onto them that doesn't integrate well with the car, and you wonder if they've ever actually been to a car show and understand that the best modifications are done in a way that makes the car look more integrated, not less. Phone cases have always been sinners this way.
I bought a matte black TPU case more or less as a placeholder... I've been a person who personally hates cases due to the above, and these phones are so thin that I'd hate to ruin that as well...
Needless to say, I clicked "purchase" with a sigh, thinking it was just temporary, something cheap for protection until the market opened up and I might find that 1% case that was classier and didn't look like a "case snapped on a phone".
I have been more than pleased with the TPU case, I feel like I've accidentally stumbled onto that case. It's the right combination between soft and hard, to actually absorb and disperse shock, it wraps around the front to protect there too, 360 degrees.
It looks like "the phone", it doesn't look like a case even, and the matte black back and gloss front ring look classy, elegant. No rubbery gel look, no playskool plastics, no kids-toy colors or fades, no skulls or dragons, etc. The phone is thin enough to pull it off without looking like a brick too.
I'd recommend this case to others - especially for the $8 shipped cost.
I'd think it'd much better absorb shock than a hard plastic one... it'll absorb it rather than transfer the shock wave right to your phone like a hard plastic one would.
I have not found any worthy case for SG2...There is not a big variety.
i almost love the case
for twenty dollars its not bulky. Thinner than the tpu cases thats for sure ialso tried a gel but doint think i need the xtra protection. im not clumsy and take care of my phones. the top and bottom are not protected but kinda they are they have a lip over the corner and unless it falls on something that sticks out im good. falls on floor the corners are good. plus any case that is over protecte are over bulky an for the scratching have not seen any thing of the like
I'm with Vega. This case is very good, looks great, isn't bulky, and isn't scratching my phone.
I posted some pics in the thread for this case ( http://forum.xda-developers.com/showthread.php?t=1292459&page=2 ) so you can maybe see it from some angles not in the sales shots, but everyone I show this phone to immediately comments on how small and light the phone is, and then I take the case off and they are amazed it gets even smaller.
I'm not a fan of cases, and I'm not a fan of any extra bulk, and I really like this case. Looks great, and gives some light protection.
Light protection? Yes. I did a drop test on linoleum (much harder than carpet, but not as hard/damaging as concrete) and in three drop from knee, waist, and chest high, it did fine. At head high, the case popped off. Which I expected. If you are throwing your phone around like a spaz, get a good gel case or something better than that. If you might accidentally drop your phone getting out of a car, but are not a spaz beyond that, this case is great.
Pics again:
I used this case for about 2 weeks and it scratched my phone on the side bezel on both sides of the phone and also on the back of the phone down by the speaker. I wouldn't use it again. Got the TC case from Amazon in matte black. is much better and cheaper.
@DevonSloan thank you for a little bit more review on that for me :-D i also like the pictures you added much better than what amazon showed
Vega said:
for twenty dollars its not bulky. Thinner than the tpu cases thats for sure ialso tried a gel but doint think i need the xtra protection. im not clumsy and take care of my phones. the top and bottom are not protected but kinda they are they have a lip over the corner and unless it falls on something that sticks out im good. falls on floor the corners are good. plus any case that is over protecte are over bulky an for the scratching have not seen any thing of the like
Click to expand...
Click to collapse
Not so. This kickstand case is much thicker and bulkier than the TPU case. I know this for a fact because I have both. The TPU TC case is cheaper, thinner, feels better in your hand, protects your phone better, won't scratch your phone, is less slippery, and your phone won't fly out of it if you drop it. That happened to me with this case, too. The kickstand is lame as well. If you set it on a table with the kickstand out, the phone leans back at about a 45 degree angle making it really hard to see the screen.
DataHawg said:
Not so. This kickstand case is much thicker and bulkier than the TPU case. I know this for a fact because I have both. The TPU TC case is cheaper, thinner, feels better in your hand, protects your phone better, won't scratch your phone, is less slippery, and your phone won't fly out of it if you drop it. That happened to me with this case, too. The kickstand is lame as well. If you set it on a table with the kickstand out, the phone leans back at about a 45 degree angle making it really hard to see the screen.
Click to expand...
Click to collapse
well somethings wrong if ur having issues seeing the screen. the type of screen it is, has the feature to be able to have the phone at an angle and still see the screen clear.i myself would prefer a bulky feel any. like the htc evo shift is semi bulky just a really small screen.
If you like a bulky case this is the one to get. Most of us don't, especially on a phone this big. Just sayin
If anybody is wondering about cases, I bought the case mate tough case from amazon last week, it arrived today. Paid about 25 euro inc. postage to ROI.
Case looks good on the phone, its a silicon inner case with a hard polcarbonate shell. Access to all buttons and connections are good. It seems sturdy enough, but I have yet to drop it (I'll update when I drop the phone, it wont take long ) If it bothers anybody, the case makes a hollow noise when you tap the back of it, it annoys me a little, but I cant imagine I'll be tapping the back of the phone that much anyway
A silicon lip around the screen also helps protect the screen if left/dropped on its face, as well as stopping it slipping while left on a hard smooth sloped surface.
The case is about 2 or 3mm thick I would estimate. Most people dont like thick cases, but on the contrary, I kinda like the added bulk, I have big hands.
The back of the case is textured with ridges, but the hard plastic still feels somewhat slippery or something. Its not in any way difficult to hold, but perhaps not as grippy as a rubberised finish would be. An advantage of the hard shell is that it slips effortlessly in and out of your pocket. The small silicon faces exposed don't gather much lint either, and they lose it really easily anyway when you run your finger along them.
A screen protector and screen wiping cloth are included, I havn't tried either of them yet though so cant comment.
Something that's important to point out about this case and other accessories for the wildfire s - I know its been said before, but the wildfire s comes in 2 different sizes. This case fits the european version of the wildfire s, to the best of my knowledge the otterbox case fits the american version. Just be careful when getting a case, I almost bought the otterbox, whick would have been way too large
Overall, first impression is that this is a good case. If you don't like bulk maybe this case isn't for you, it does add quite a bit to the phone size wise, but I have rather a habit of dropping mine so I don't mind, it can use all the protection it can get.
I'm just putting this brief review up for anybody who wants info on it, I'd be happy to answer any questions if I'm leaving out anything.
Laurence
yes otterbox fits the US ones, I've got it and I love it. they appear near-identical to the case-mate one, so just about everything you say applies the same to that. the only big difference is that otterbox has very light texturing on the plastic part.
Hi!
I'm looking for a case without cutouts for the flaps, only for the magnetic charger.
Does anyone know where to find these?
Thanks!
The cruzalite bugdroid cases do not have the port cuttouts i think.
Heartkingz said:
Hi!
I'm looking for a case without cutouts for the flaps, only for the magnetic charger.
Does anyone know where to find these?
Thanks!
Click to expand...
Click to collapse
Like someone else mentioned the Cruzerlite case which is available on their website or on Amazon.
The RhinoShield bumper will also have the flaps covered if they get enough Pre-orders to produce it. http://www.evolutivelabs.com/pages/crashguard-sony-z3-compact
http://www.evolutivelabs.com/blogs/news/15830813-rhino-shield-crash-guard-z3-compact-renders
I, too, am looking for a similar case. I'd like something like the Incipio Dual Pro that leaves open only the headphone jack and the magnetic charging port. It just seems to me that leaving open the area surrounding the USB port and microSD card slot just wouldn't be good for overall protection. Bumpers also don't protect the rear of the phone, just the edges. I guess that basically leaves me with the Cruzerlite...
Exactly, I think we need to wait a little bit longer for more cases like this, unless someone has a good suggestion ofcourse.
I'm also looking for this, since my wifes microsd and USB port flap will come open up by itself many times in a day.
I would give great money for the Puro covering all flaps. Best so far. But unable to make contact with them.
I would like to buy a cruzerlite, but I hate the design on the back. Would love to find a similar one that's just plain.
Biggest issue of the cruzerlite is it's off the best screen protectors. Personally I also don't like the finish of the sides. Feels cheap.
Yeah the cruizerlite looks like a good case, but it is a little bit translucent right? Don't like that..
The magnetic charger is such an easy method to charge your phone without pulling the flap.
It is a little bit of a hassle in the beginning but you'll get used to it!
I also pre ordered the Rhinoshield. I hope they get enough pre orders because that's gonne be one badass case for our Z3C:good:
The black CruzerLite Bugdroid case is opaque.
Like others, I wish it didn't have the goofy design on it, but otherwise it seems nice. I'd rather have it cover the buttons, though, because the tiny isthmus of TPU between the power and volume buttons looks horrible (like it isn't fused into one piece right there). Otherwise, it's a decent case.
Do you guys know of any new cases that came out without flap cutouts? I'd buy the Bugdroid case but the design is bugging me too much...
It's a pity the RhinoShield didn't get produced in the end...