Hi, I tried many roms and most of them work fine. but I'm always having comm manager issues.
On first boot, comm manager loads fine. but after some use.
whenever i want to use comm manager to load wifi or bt, it won't show up.
I need to reboot the phone and do it.
does anyone know what could be causing this?
thanks
i dont know why it does that but (assuming your using 6.1 and up) you go into the task manager and kill the wrlsmanager process. go back to the home screen and restart the app it should start up now and avoid the reboot.
thanks!
i'll do that when it happens.
so annoying... lol
I had that problem, it was irritating but I just had to make myself press the "Done" button in Comm Manager when I had finished using it, rather than just switching to another app. It always seemed to open fine after I changed my habits! ;-)
it happened again, but this time i don't see wrlsmanager process
and reboot doesn't work.
any other ideas?
thanks
is this an issue in every rom? or could it be hardware?
cuz every rom i'm trying is acting like this.
some don't even load after a reset.
it just shows the color wheel.
i have 19mb free ram. so what gives?
Thanks
Ray_jai said:
is this an issue in every rom? or could it be hardware?
cuz every rom i'm trying is acting like this.
some don't even load after a reset.
it just shows the color wheel.
i have 19mb free ram. so what gives?
Thanks
Click to expand...
Click to collapse
I'm not so sure if I am understanding this incorrectly, but is it that Bluetooth and Wifi are greyed out on the comm manager? or will the comm manager just not work?
If it is the prior, then what ROM are you using currently (although you say you have tried many)? If it is Ookba's 3vo V2.5.080809 then he posed a fix on the second post for Wifi issues. I know i had issues where Wifi wouldn't start. I installed the fix, and it did exactly that, it fixed it. Not so sure about bluetooth...
I would go ahead an ask Ookba what he did, because at one point he mentioned suspecting there were hardware differences in some Excalibur units...
If it is that the comm manager wont start up, that is weird. If killing the process doesn't always work, check the sortcut...I know that one or two ROMS that i had used in the past had problems where they accidentally put "commmmanager" or something of the sorts, and most of the time, the phone was unable to interpret that correctly.
If it isnt either of those, then I am sorry I am totally off track haha.
Anyways, hope I helped a bit...
Hi
the comm mananger won't load.
and there is no wrls manager process running.
it doesn't load after a reset sometimes either.
I tried the roms posted in the wiki
most of the wm 6.1 roms posted in the wiki
080408 - Remade By Rickywatt
NRG's 'Rose' ROM ver. 1.4
NRG Rose Rom v1.7 - Remade by Ricky and Stylez
and
3VOLUTION series
thanks
what should the comm manager target be?
thanks
Well, i just used a text editor to look at my phone's CommManager link on the start menu ...
Running Ookba's 3VO 2.5 (with the WiFi Patch installed) it says this:
Code:
39#"\Windows\CommManager.exe"
?\Windows\SP_ProgramIcon.dll,-110
The second line is for the links icon...the first line points to where the Communications Manager program is...make sure it matches that...
By the way...are you launching comm manager from the start menu or from the CComm panel on the homescreen, or are you using the 'hold down the TZones/Internet button' method implemented in some ROMs?...for any of them there is a way to check the link....
I mentioned above how to check for Start Menu....
For the CComm Panel, go into the registry with a registry editor...Navigate to HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CComm\ ... in there should be keys named "Page1", Page2 and so on...check each of them for "SK2URL" and make sure that for each the value is "\Windows\CommManager.exe" (no quotes " ")
For the holding down of the TZones/Internet button, go to the windows directory and look for long_IE.lnk (i think that is what it is called, im not sure though...my phone doesnt have that) and make sure it points to the correct file...
That is really all i can think of...hope it helps
thanks,
but how do u check a shortcut on a smartphone, i used to use shortcut creator on the PPC. but it doesn't work for the smartphone.
thanks
Ray_jai said:
thanks,
but how do u check a shortcut on a smartphone, i used to use shortcut creator on the PPC. but it doesn't work for the smartphone.
thanks
Click to expand...
Click to collapse
Do you have Notepad or something on your phone? If not I believe there is a NotePad program on the Development and Hacking sub-forum on XDA, if not you can go to this site, they have a notepad application i belive
http://mobile.surrealnetworks.com/DashApps.htm
Use that to open the .lnk file...
And i use Resco RegEdit to edit the registry, but i believe most ROMS have some reg editor built in...
Thanks,
mine says:
59#"\windows\CommManagerlink.exe"
should i rename it?
thanks
Ray_jai said:
Thanks,
mine says:
59#"\windows\CommManagerlink.exe"
should i rename it?
thanks
Click to expand...
Click to collapse
For starters, why is it "CommManagerlink.exe", it should just be "CommManager.exe", unless that is how the ROM was cooked.
Okay, try this...
First, go to the WINDOWS directory, and find CommManager.exe, and click it. If it works, then the shortcut is the problem...if so move on to the next 'step'...
Using a file explorer, make a backup copy of the .lnk file (just do a duplicate, or copy and paste into a new folder) just incase something goes wrong.
Now, for the first try, just change "CommManagerlink.exe" to "CommManager.exe" (obviously, no " "). if that doesn't work, do the next method.
If the first method didn't work, try replacing the contents of the .lnk file with
Code:
39#"\Windows\CommManager.exe"
If that method did not work, then I am really not sure what is wrong. However, i know that some ROM's come cooked with Resco Explorer...and there is a function on one of the menus to "Send to Start Menu as a Shortcut"...that would make it a whole lot easier...since you could just do that instead of making/modifying your own...
Look inside the WINDOWS folder, and look for "CommManagerlink.exe" ... I doubt it exists...but it all depends on what ROM you are using, as I don't know the specifics of EVERY ROM. So what ROM are you currently using?
Hope this helps
Odd, I have both. LOL
CommManagerlink.exe and the non link one.
I'll make 2 short cuts and see which one works better.
I'll report back with results
Thank you for all ur help.
Dammit it happened again.
I don't get it.
why it doesn't load up.
even when i try the phone alarm buttons it doesn't work.
the buttons light up on phonealarm, but the bluetooth or wifi doesn't work.
I don't get it. wtf...
I see the commmananger.exe running in the process, but i can't end it.
Ray_jai said:
Dammit it happened again.
I don't get it.
why it doesn't load up.
even when i try the phone alarm buttons it doesn't work.
the buttons light up on phonealarm, but the bluetooth or wifi doesn't work.
I don't get it. wtf...
I see the commmananger.exe running in the process, but i can't end it.
Click to expand...
Click to collapse
Give me som details about your phone...
Where was it made (China or Taiwan)? (it says behind the battery, on the phone)
What ROM are you running?
How much are you overclocking?
What applications do you have installed?
Are you trying to use the 'NEW' CommManager (the sleek one), or the Old Default (for stock ROMs) that is tacky?
And any other detail you think is important...
From that i may be able to help you more!
Hey,
thanks for helping me out.
I have the Taiwan version and the China version.
both of them are currently using the NRG rose 1.4 rom.
i have programs like,
Sktools, phone alarm, facade and S2u2 installed.
But i had this issues before installing any programs.
it happens on and off. and sometimes a softreset brings it back.
the rom came with the HTC comm manager.
but I switched it to the tacky one cuz it loads up faster and i don't need to scroll.
Thanks
Ray_jai said:
Hey,
thanks for helping me out.
I have the Taiwan version and the China version.
both of them are currently using the NRG rose 1.4 rom.
i have programs like,
Sktools, phone alarm, facade and S2u2 installed.
But i had this issues before installing any programs.
it happens on and off. and sometimes a softreset brings it back.
the rom came with the HTC comm manager.
but I switched it to the tacky one cuz it loads up faster and i don't need to scroll.
Thanks
Click to expand...
Click to collapse
S2U2? Are you even using an Excalibur? If not, you have posted in the wrong thread, as this is for EXCALIBUR phones. Although i guess windows mobile is windows mobile no matter what phone you are on.
I would do some google'ing...search for errors related to programs, bugs, or glitches that might make them interefere with the phone's normal functions. I would try looking at Facade since (if i am correct) that interacts with the homescreen, which i suppose could accidentally screw something up with other system functions.
These are all guesses, and I can't honestly think of anything else...It is really up to good google powers now haha.
Yea I'm using the Tmobile Dash. lol
I use S2u2 as the locking program.
it works well. the old locking program didn't work too well for me.
I had this issue before i knew about facade or installed it.
thanks
Ray_jai said:
Yea I'm using the Tmobile Dash. lol
I use S2u2 as the locking program.
it works well. the old locking program didn't work too well for me.
I had this issue before i knew about facade or installed it.
thanks
Click to expand...
Click to collapse
Oh, i was under the impression S2U2 was only for TouchScreen. Anyways, so the problem did happen BEFORE using Facade...hmmmm...thinking time!
I will get back to you as soon as i can think of a solution for your situation. However I am busy on my theme!
My current solution...Upgrade to one of the WM6.5 ROMs...they are awesome IMHO and probably give you better battery life...
Related
Hey all,
Can somebody confirm that they have had the Uni working with the AKU_3.2 VGA files in the ftp site and jwright's 3.2 ROM?
I've been running the i-mate default ROM on VGA for almost a year now and decided to switch over to the new 3.2 ROM a few days ago. I don't use ozVGA but use the registry hack straight up with the VGA files and VGA system apps.
But for some reason, I can't get all my icons displaying. I've run sdkcerts countless times, hit the power button waiting for 5 seconds before soft resetting, done multiple reboots changing up the order of sdkcerts and vga file copying... I just can't seem to get it to display all the icons correctly.
I know that I'm missing my volume and my cel reception indicator on the top bar at the very least. I CAN see my wifi icons, clock and magic button icons. On another post I found somebody whose screenshot matched mine and the suggestion was to install the AKU_3.2 VGA files again. I've done that alot.
Any ideas would be appreciated. The Uni is significantly better at VGA.
Thanks.
Hmmmm, something strange is definitely going on... I've installed the original ozVGA cab now and even that has not worked. Same problem, it's not loading the top bar icons.... just like if I had not installed those 96dpi resource files into the Windows directory.
Can anybody confirm or deny that ozVGA works with the AKU 3.2 rom?
And mvrTrueVGA is the winner. Why it seemed to work and the other didn't is beyond me...
So I've compared all the files that mvrTrueVGA installs to the VGA files that are supplied in the AKU_2 zip. Essentially, they are all different (which honestly doesn't say much) but there are some interesting additions.
There are new files.
mismde.96.dll
trares0407.96.dll
Plus two interesting things. First off, I was using Total commander to search for all files that were *.96.*
It found two other files which had some interesting properties...
rires.96.dll -- this file I can see on my pocket pc but can't see it through activesync explorer
shellresapps.96.dll -- this file I can't copy from the PPC to look at it. Activesync complains that it cannot convert it.
Just some interesting info in my investigations.
Hi,
I wanted to try out VGA myself. Would it be too much to ask for a step by step instruction list for "beginers"? Attached files would also make it wonderful.
Thanks very much.
Me too wanna try vga with AKU 3.2 if it's totally safe .
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
there's also
http://www.aximsite.com/boards/showthread.php?t=136251&page=2&highlight=A12+OZVGA
as an alternative
fards said:
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
there's also
http://www.aximsite.com/boards/showthread.php?t=136251&page=2&highlight=A12+OZVGA
as an alternative
Click to expand...
Click to collapse
Hey thanks.
The Power Settings and the Phone Applications are all mangle up though.
Backgrounds work through Pictures and Video.
cktlcmd said:
Hey thanks.
The Power Settings and the Phone Applications are all mangle up though.
Click to expand...
Click to collapse
You need xda-devs own VJ's vjBigPhone for phone issue...
http://forum.xda-developers.com/showthread.php?t=249642
Download from
http://www.vijay555.com/?Releases:VJBigPhone
Along with this post
http://forum.xda-developers.com/showpost.php?p=844841&postcount=48
Unfortunately I can't find the .cab files to save entering the registry keys manually.. The link on Vjs post are missing..
How often do you really need the Power screen?
Can nebody b nice enough to post their screenshots as b4 trying this i would like to see this already working fine on uni. ?
fards said:
You need xda-devs own VJ's vjBigPhone for phone issue...
http://forum.xda-developers.com/showthread.php?t=249642
Download from
http://www.vijay555.com/?Releases:VJBigPhone
Along with this post
http://forum.xda-developers.com/showpost.php?p=844841&postcount=48
Unfortunately I can't find the .cab files to save entering the registry keys manually.. The link on Vjs post are missing..
How often do you really need the Power screen?
Click to expand...
Click to collapse
Thanks for the tip. Yes, VJ's Phone app works like a charm. What is the purpose of the other link that you gave us with the registry changes?
It would be nice though for the power settings to be seen as normal as possible.
niketkumar said:
Can nebody b nice enough to post their screenshots as b4 trying this i would like to see this already working fine on uni. ?
Click to expand...
Click to collapse
I would post a screen shot for you, but my computer keeps crashing. I have to sort things out.
For all of your complaining about the messed up power and backlight exe's, check out this set of posts.
http://forum.xda-developers.com/showthread.php?t=250640
WARNING: Don't overwrite camera.exe, wlanmgr, or wmodem if you are using the AKU 3.2 ROM. It already has updated versions of these apps. I am only using the power, backlight and microphone mui's.
And please, please read the messages in the post on instructions of how to install them. It's right there in the first post so you don't have to read too far
Dan Feeny said:
For all of your complaining about the messed up power and backlight exe's, check out this set of posts.
http://forum.xda-developers.com/showthread.php?t=250640
WARNING: Don't overwrite camera.exe, wlanmgr, or wmodem if you are using the AKU 3.2 ROM. It already has updated versions of these apps. I am only using the power, backlight and microphone mui's.
And please, please read the messages in the post on instructions of how to install them. It's right there in the first post so you don't have to read too far
Click to expand...
Click to collapse
Thanks very much. I did not even notice those. Keep the suggestions coming. VGA seems better now even though it is still small.
I copied the files: power, backlight, and microphone mui's to my SD card ran them and got a nice looking files without distortion, I copied the files as suggested to the /Windows folder and did a soft reset. But if I access the power, backlight, and microphone through the Settings Tab, I still get the old distorted image. Is this the way it should be? Am I doing something wrong?
cktlcmd said:
Thanks for the tip. Yes, VJ's Phone app works like a charm. What is the purpose of the other link that you gave us with the registry changes?
It would be nice though for the power settings to be seen as normal as possible.
Click to expand...
Click to collapse
The registry links is to change the font size on the phone buttons.
cktlcmd said:
I would post a screen shot for you, but my computer keeps crashing. I have to sort things out.
Click to expand...
Click to collapse
No probs , I will wait.
cktlcmd said:
Thanks very much. I did not even notice those. Keep the suggestions coming. VGA seems better now even though it is still small.
I copied the files: power, backlight, and microphone mui's to my SD card ran them and got a nice looking files without distortion, I copied the files as suggested to the /Windows folder and did a soft reset. But if I access the power, backlight, and microphone through the Settings Tab, I still get the old distorted image. Is this the way it should be? Am I doing something wrong?
Click to expand...
Click to collapse
Did you run the .0409.mui exe first? Then copy to Windows? Then remove the trailing .exe from the .0409.exe files? It worked perfectly for me.
Dan Feeny said:
Did you run the .0409.mui exe first? Then copy to Windows? Then remove the trailing .exe from the .0409.exe files? It worked perfectly for me.
Click to expand...
Click to collapse
yep rename the files, get rid of the .exe on the end of the 409.mui one
I found the CAB in another thread. There were warnings about Installation, another Guy had to do a Hardreset to get his Device booting.
I tried out and on my O2 XDA Cosmo with WM6 it works fine.
I think the Device becomes slower but I like the Homescreen.
Try it on your own risk!!!!!!!!
Thanks.. Its neat..
do u know if their is a htc home customizer for this...i can only find for ppc that does not work on the excalibur
nice theme.. but the favorite people plugin doesnt work with my BJ2 WM6
@gsportz156
Yes, I also tried the HHC App and the installation corrupted. I don´t know another tool.
@ipwoof
You can´t choose the Persons. When you choose "favorite People" and switch the Middle Button (I don´t know the name ), then -on my device- a new window opens with the saved numbers.
This is nice home screen, is there any way to add one more tab for launcher and different icons..
thanks in advance
This is a nice screen, however, it seems to slow my phone down a lot and I am running the Rogers ROM with it...
I can't get the contacts shortcut to work. When I select it the 'config' screen comes up and disappears a second later not allowing me to put contacts in the shortcut. Any ideas out there.
thirdstripe said:
I can't get the contacts shortcut to work. When I select it the 'config' screen comes up and disappears a second later not allowing me to put contacts in the shortcut. Any ideas out there.
Click to expand...
Click to collapse
had that problem unistall restart than reinstall
Worked fine on my phone with the Rogers Rom. Looks nice but would look better if it had vista aero effects. Free memory does drop from 22MB to 15 MB on the Rogers Rom.
gsportz156 said:
had that problem unistall restart than reinstall
Click to expand...
Click to collapse
Did that. I had the same problem. Every time you install something else on it, it goes right back to acting like that. I dunno If i like it anymore.
Hmm, I seem to be having a problem aswell....everything installs fine, but once I restart my phone...it tries to load at startup and comes up with the message-"Keyboard Hook failed. Program closed" or something along those lines...any ideas guys?
ashasaur said:
Hmm, I seem to be having a problem aswell....everything installs fine, but once I restart my phone...it tries to load at startup and comes up with the message-"Keyboard Hook failed. Program closed" or something along those lines...any ideas guys?
Click to expand...
Click to collapse
oh wow... thats the first time i heard of that problem. i havent had anything like that. :knocks on wood:
01rdgolf said:
Did that. I had the same problem. Every time you install something else on it, it goes right back to acting like that. I dunno If i like it anymore.
Click to expand...
Click to collapse
Try using this version. It doesn't seem to have the issue with the contacs and takes up less memory.
is this require facade?? then what else requirement to run this theme properly??
chelsea_fc said:
is this require facade?? then what else requirement to run this theme properly??
Click to expand...
Click to collapse
Facade is not required. All you need to do is install the Cab file.
just try the new attached cab, works great...
Tried it, nice but I wanted access to the MRU so here is what I came up with.
Just extract to your SD card and it will appear in the Home Screen Layouts.
This is the HTC Home replacing the Appointments with MRU.
See the attached screenshot.
I downloaded HTC Home from here:
http://www.modaco.com/content-page/...or-S710-E650-as-on-S730-/page/60/#entry866803
the full package (i need appointments) and works great. Just scroll it down to see the MRU!
It started with NRG's rom redone by ricky & stylez... Thought maybe it was ROM specific... so I switched to NRG Latest version (not modded by rick & stylez)... and the same thing has started happening.
Whenever I try to open anything (messaging, celetask, commanager, etc)... I get a low/insufficient memory error)... sometimes the phone freezes up at this point, and I have to unplug the battery to restart it.
Sometimes if I get this error, i can still get into celetask, and end the "htcactivitylogexe.exe" and it frees up nearly ALL of my memory.
OMG same problem here lol
so i went back to Rickys, its good so far :]
Same thing here.
lubs said:
Same thing here.
Click to expand...
Click to collapse
No such thing just seen your other post i.m.o view, strange how it's a small few yet thousands of downloadz
If you read the forum for the remake of NRGZ rose by rick&stylz they have a solution in the registry to remove that hassel
nic3a said:
If you read the forum for the remake of NRGZ rose by rick&stylz they have a solution in the registry to remove that hassel
Click to expand...
Click to collapse
I searched the thread for "HTCACTIVITYLOGEXE.EXE", no results... and I searched for registry, and none of the posts referred to this problem? Could you post a shortcut?
I cant find much on the subject either... i am running the stock 6.5 rom and getting the error.... My google search on it brought me here... Would love a fix for it...
Originally Posted by fletch319
I did some digging through the rest of the forums and it looks like there are numerous versions of this HTCActivityLogExe.exe app. A lot of them have an enormous memory leak and some don't. I was also able to track down that this process gets launched when you use the HTCSlidingHomePanel. The weatherupdateservice gets called which in turns loads the HTCactivity app.
For those who just want their phone to run without running out of memory every 5 txt's do the following:
Go to HKEY Current User\Software\HTC\Bootlauncher\Apps\HTCSlidingPane l and delete the "Module" key which has a value referencing the weather app. When you reboot, WeatherApp.exe, WeatherUpdateService.exe and HTCActivityLog.exe no longer load. Apparently they are all part of the weather app.
So perhaps those who are not having issues are not using this home screen?
ADD; I found HTCSlidingPanel under "services", NOT Apps
I cant find HKEY Current User\Software\HTC\Bootlauncher on my htc excalibur running rom V24 from Rickywatt... does anyone know where it is? or how to disable WeatherApp.exe, WeatherUpdateService.exe and HTCActivityLog.exe on the excalibur (if its a different procedure all together).
Wh0w4 said:
I cant find HKEY Current User\Software\HTC\Bootlauncher on my htc excalibur running rom V24 from Rickywatt... does anyone know where it is? or how to disable WeatherApp.exe, WeatherUpdateService.exe and HTCActivityLog.exe on the excalibur (if its a different procedure all together).
Click to expand...
Click to collapse
You can disable it via the registry by changing the Dword Value of course or your delete WeatherApp.exe, WeatherUpdateService.exe
23506 BETA Download bottom of this post
This is the new WM6.5 23506 - I'm Starting with a BETA - I need feedback please so I can create a working version... As this is a BETA, there will probably be some issues with it. As always, Back Up Your Data!
Only download and install this version if you like to tinker and deal with possible problems. So far, it's been good, aside from the below issue.
I just had an issue a few moments ago. My phone was off, (So I Thought). It was checking my Gmail account, then went to sleep during the download, then froze while it was off for about 1 hour. It drained about 1/4 of my battery and I had to Soft Reset to get it back. Please beware there MAY be issues, or this could have been one of those rare & wonderful WM glitches that happens occasionally.
I was going to try to fix the problems in the previous 23504 ROM, but I've been using 23506 for a bit today. It seems to be VERY Responsive, Stable, and has Plenty of memory available (Some things seem REALLY Fast). I have cooked a Stock ROM with a couple "SuperSport" mods, (Mostly Visual), and it is looking like 25.76MB Free Ram (20-22 after a few hours) and 67.14MB Free Storage. This is leaving in SkyMarket, Live, Themes, Ringtones, and all the WM Widgets. The only things I removed are AutoUpdate (Does Nothing Anyways), MSTag (Not Compatible with Trinity Camera), and some extra files for other resolutions. Otherwise, as it was made. Oh, I changed some Images for my Theme. I may create a Cab to put all images back to stock if I get time. This will probably be a highly requested option.
Pin Lock appears to work properly now. I know a few of you will like that.
I plan to release the Stock ROM tonight as a BETA so that I can get feedback. My phone's WiFi is still broken, so Please test it, and I'd like feedback on the BT File Transfer. I can see some of the files are there, but don't know if it's working.
I don't have a lot of time to test everything on this, so would appreciate help with that. When I get enough feedback, I'll fix what I can and release a couple flavors of it.
I'm really proud of this one. It's the first one where I did not borrow a completed SYS/XIP from someone else. I assembled this one myself, so everything is as it should be and very clean. Also could be a Train Wreck.
One pet peeve: HoneyComb is Back! Eewww I'll try to figure out how to get rid of that for those who want.
Thanks to everyone for your feedback, good and bad. I'm trying to make our Trinity run a little longer...
PS: Because I have no idea how to move them, I've got 127 Modules in Slot #0 and 254 in Slot #1. Not sure if it would help or hurt to move them as it runs really nice now. Maybe it would be REALLY fast if moved?[/COLOR][/I]"
Each Different Version will be listed with a Download Link for each. In each Download Link I will post the Self Extracting Kitchen, an RUU_Signed.nbh, and an AutoFlash file.
What is AutoFlash you ask? I've taken the RUU file, added the Flashing Program, and Packaged it all up into an AutoExecuting AutoFlashing Program, and, it's a smaller download than the RUU alone. Pretty cool huh? Yes, others have already done this, but I'm going to make it a standard practice from now on.
"AutoFlash (tm), Making Flashing Socially Acceptable, One Package at a Time!"
My recommendation for Flashing is:
Make sure you have Hard SPL on your Phone. I recommend Olipro 1.20 - Click Here for More Info
Be sure your battery is at least 50% full.
Start your phone in Tri Color Screen mode. Steps below
--Unplug your phone from USB
--Hold down the Power & Camera Buttons
--While still holding them down, press the Reset Button using the Stylus
--Release the Reset Button, but continue to hold the Power/Camera buttons until you see the Tri Color Screen
--Plug in the USB cable (if asked about installing a driver, do this), You should see USB in the White Box)
Now you can Flash.
Run the AutoFlash file for the ROM you've selected, or Flash using the Standard Flashing Program included in the Kitchen.
Enjoy!
DOWNLOAD
Thank you to EVERYONE on XDA. Chefs, Programmers, Cookers, Users, Noobs, everyone! You've ALL helped me to be able to do these. I'm sure I'll learn a LOT more as the days go by.
NEW!!! Color Themes!!! In Attachments!!! Also, Enable or Disable Startup Sound
Use these to Change the colors of the Today Screen, Menu Screen, and Dialer. Portrait & Landscape! Grid.zip is two cab files I made that will remove or add the Menu Grid.
Reserved..
Flashing as i post
Edit
Free Storage: 67.17 MB
Free Program: 21.12 MB
Softreset with Pinlock enabled functions again
Hi Supersport,
Just flashed, wifi works fine for me!!!
Do you remember? I had some problem with the 23504 version.
Thanks a lot
Videocall doesn't work :-(
Dear Supersport
Flashed the 23506 and have following observations:
1) PIN lock works
2) WIFI works
3) Communication manager when started from top bar does not start and had to start wifi fro connections.
4) Microsoft My Phone program is old one and have new cab file on my storage card so that I don't have to download again and again.
Will post further feedback tomorrow morning about battery performance and PIN lock problem, if any.
WiFi, Pin Lock
gmlai said:
Videocall doesn't work :-(
Click to expand...
Click to collapse
No, Videocall is something I'll have to add. This is just a Stock Version of the OS that does not include Video Calling. That feature is all but gone on most newer phones, I'm assuming. So, for the Trinity, we add it back in using an old dialer from our original OEM ROMs. This will come later when I get a chance to make different flavors of this ROM.
PS: Glad the WiFi is working for you. I hope it's the same for everyone. 23504 Varied from user to user.
AkshayGenius said:
Dear Supersport
Flashed the 23506 and have following observations:
1) PIN lock works
2) WIFI works
3) Communication manager when started from top bar does not start and had to start wifi fro connections.
4) Microsoft My Phone program is old one and have new cab file on my storage card so that I don't have to download again and again.
Will post further feedback tomorrow morning about battery performance and PIN lock problem, if any.
Click to expand...
Click to collapse
Same thing here. CommManager is not included with the Stock OEM ROM as it is probably different from phone to phone. That will also be added in on future versions.
I'm glad to hear the other two things work.
I'm having a little trouble with my phone hanging during Email stuff. Anybody else experiencing this? Since my Radio is Bunged up, I'm not sure if it's just me...
Anybody get a chance to try BT File Transfer? Is it there or working? EDIT: My initial test tells me this is probably not working...
Does anybody remember how to get rid of the HoneyComb Frames?
SuperSport said:
Does anybody remember how to get rid of the HoneyComb Frames?
Click to expand...
Click to collapse
can this help?
first post
http://forum.xda-developers.com/showthread.php?p=4454239
and here second post one of the Q/A
http://forum.xda-developers.com/showthread.php?t=492532&page=2
_X_ said:
can this help?
first post
http://forum.xda-developers.com/showthread.php?p=4454239
and here second post one of the Q/A
http://forum.xda-developers.com/showthread.php?t=492532&page=2
Click to expand...
Click to collapse
The first one let me know which files I was looking for. Thank You AGAIN _X_! I pulled the cpr files from my 23504 and cabbed them. Now, you can add or remove the Grids per your liking. Just install either Cab and Restart. Now, if I cook without them in the future, you can easily add them back in.
Cabs in First Post. Unfortunately, I ran out of Attachment Slots (Max 8), so I zipped them together as Grid.zip Attached here seperately.
The following is the info/update in the morning:
1) Wifi works like a charm
2) Battery is stable during wifi usage and normal usage and no unusual drainage observed.
3) PIN lock works without any problem.
4) Synch with PC also works smoothly.
5) If there is no communication mamager in this version , then why it is shown when u press top bar phone signal sign? Please look in this as something else may be the reason for communication manager not working.
AkshayGenius said:
The following is the info/update in the morning:
1) Wifi works like a charm
2) Battery is stable during wifi usage and normal usage and no unusual drainage observed.
3) PIN lock works without any problem.
4) Synch with PC also works smoothly.
5) If there is no communication mamager in this version , then why it is shown when u press top bar phone signal sign? Please look in this as something else may be the reason for communication manager not working.
Click to expand...
Click to collapse
Actually, it's not included in the SYS normally. It's usually cooked in later by the chefs. I'm not sure why, as I think I remember it being there in the Older ROMs. It will be fixed on my next release. Yes, the reference is there in the Notifications, but the program itself is not.
I will need to be gone for a good part of the weekend, so I wanted to give you something to play with while I'm gone. I'll probably log in a few times using my phone, but not sure how much I'll be responding.
This is 23506 with some SYS packages removed. I added a few EXT packages to make it easier to work with and help with diagnosing.
Removed:
IE8 - IE6 Still there
LiveSearch
Skybox
Skymarket
WelcomeCenter - Seems there's a problem with this
WindowsLive
WindowsLiveIM
WMMoneyWidget
WMWeatherWidget
WMWidgets
Added:
ArcSoft MMS 5.2.2.37
CommManager 2.9.5.0
eNatives_ShowcaseSuite_1.1.0
FingerKeyboard 2.1
BT Explorer
nueSIPDefault
PHM Regedit
Soft Reset w Modified Icon
Total Commander
My Customized Menu - By using the Cab in a previous post, you can remove the HoneyComb Grid
Have fun, and I hope it runs well for everyone. I haven't had much time to test this one either.
Get it in Post #1 using the DOWNLOAD link. Grab "AutoFlash 23506 Lite w Addons.exe" Should be finished uploading in about 5 Mins
Have a nice weekend
Waiting for the new ROM
_X_ said:
Have a nice weekend
Click to expand...
Click to collapse
Thank you, you guys too. I'm here tonight, so I may be able to answer questions for a while if needed.
AkshayGenius said:
Waiting for the new ROM
Click to expand...
Click to collapse
Sorry, I screwed up the link. It's there now, along with this cab that will give you 4 rows with grid, for anyone who would prefer that (using typhoonk's cpr files I put a quick cab together). I might try editing the cpr files later so the grid is removed with 4 rows, we'll see.
No link for ROM found. Can you chk again.
AkshayGenius said:
No link for ROM found. Can you chk again.
Click to expand...
Click to collapse
Strange. I just looked, and it's there. Maybe try refreshing the page 1st page?
Found ROM now under same download link, which I had missed and am downloading the same. Cannot wait to try it.
Dear Supersport
Flashed AutoFlash 23506 Lite w Addons and looks good. On the outset, PIN lock, wifi is working well. Communication manager also gives confidence that all looks well. MS office alos working smoothly. Will play and post feedback tomorrow. Have a nice weekend.
i have tried to find it via search and nothing... So here we go 4 questions...
1. any good place for step by step stuff on settings for it ect....
2. anyone able to tell me how to set a scheduale to run a program? basically i want the keyboard light to turn off and on via autokeylight
3. how to set Explorere key to auto stop all processes to free ram?
4. is there a way to make tasks button defaulted back to the orignal soft button inputs?
sorry guys these forums are so big sometimes the answers are hidden deep in a thread not about this...
disregaurd i removed it do to a conflict that caused it to crash and lockup my buttons.
RC08 you want to use with Excalibur
RC09 works good if you're running oOkBa's 3VO 6.5!
RC08 is good for 6.1 like Stylez said!
was runny rick version of 6.1 but kept freaking out the 08 version, so uninstalled it. no biggie i get what i want out of it.
thanks for the reply i might try to cook my own rom cause i want certain funcs and some removed.