Develop Bugs

bluetooth mouse help

hi i whant to now is there any fix to bluetooth mouse work with jasjar cause the mouse work but the arrow don't appear but i can clik on start ect ...
what do i do ?
the mouse is the omiz OMM810

Stowaway Travel Mouse
I have the same situation with bluetooth pilot kensington
I think that we need driver of mouse for universal
Someone already use both a mouse and a keyboard Stowaway Travel Mouse
Please search
:wink:

I have both stowaway mouse and keyboard working together. Their driver will display the cursor arrow when a mouse is connected. There is a WM5 version of driver on ThinkOutside's website.
If you are using a bluetooth mouse from other manufacturers, I remember there is a little Pocket PC utility somewhere on the Internet that will display the cursor arrow. The very first utility of this kind was developed for USB mouse to be used with USB Host-enabled PDAs. I presume that the same utility would also work with bluetooth mouse. Basically, the utility draws a cursor arrow on the screen. That's all it does.

Does anybody knows if it is possible to get "MS IntelliMouse Explorer for Bluetooth" to with Universal?
At home off course... the mouse is almost as large as the PDA
Is there any driver available?
Does the arow appears?

Conchas said:
Does anybody knows if it is possible to get "MS IntelliMouse Explorer for Bluetooth" to with Universal?
At home off course... the mouse is almost as large as the PDA
Is there any driver available?
Does the arow appears?
Click to expand...
Click to collapse
found this post while I was looking 4 the same thing!
http://forum.xda-developers.com/viewtopic.php?p=137702.
smells good, i'll give it a try

Anyone having fun yet?
It seems that on the JasJar any stowaway driver before ver 4.3 fails
The Cracks only seem to work on anything prior to 4.3
SO we are stuck between a Rock and hard place
Cant we hack the dll's again??
Who's up for trying :roll:
Regards

it worked perfectly with buzz 1.65... but with the new 2.00 it doesnt work anymore ;-(

from buzz's forum:
It seems the newer OS addresses the dll differently and therefore it fails to load. There is a new version of the Think Outside Stowaway driver 4.4 this loads fine, but does unfortunately only work with the stowaway hardware and not with the generic HID devices you and I have....
I hope someone can fix it up. I suppose the stowaway dll tries to identify the hardware and if someone is able to modify the dll not to verify the id of the hardware it should work fine once again.
someone able 2 help?

has anyone got this working yet?

with aku3.2 : the phone finds the mouse without the stowaway driver.. but needs an passkey wich isn't 0000 or 1234.. (altough I unchecked "secure connection") anybody an idea?

I don't think that's anything to do witn AKU3.2, it's just simply trying to pair with a bluetooth device.
I have paired my Microsoft BT mouse with my JasJar, but like most people, can not get the Stowaway drivers working.
I used to love using a USB mouse on my old Toshiba e800, I really wish I could with this too. I already have 3 bluetooth mice, I am not going to buy one purely for use with a PDA.

Use any bluetooth mouse with your hd

Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput

dlaponin said:
Hey guys in my searches i have found this little app. Theres an unlimited free trial available. it let's you connect any bluetooth mouse to your wm device. great app and would love to use a mouse in conjuction with my igo keyboard. I have tried pairing the mouse however it does not complete pairing and the mouse continues to sit in pairing mode. I have tried three seperate mice (logitech, targus and microsoft) If anyone is willing to give it a go and let me know how they go would be great.
Hopefully it will work for you.
http://www.teksoftco.com/index.php?section=blueinput
Click to expand...
Click to collapse
I used a Logitech V70 following the instructions on the site and it worked as advertised. I've also paired it with my Logitech diNovo Mini although not at the same time.
edit: Actually I installed the cab, turned on the radio, initiated a device search, then I turned on the V70 and pressed the connect button on the bottom. No password was required, I just clicked Next as soon as the mouse was recognized. I think this is a little bit different than the order specified on the website.

i'm encountering two main problems.
1) the Teksoft software is not recognising the bluetooth is on. I'm using the radio rom that comes with dutty's v1.7.
2) after I pair the mouse (with a blank password) it remains in discovery mode.
Just a bit of extra information i'm using the ig keyboard and have the igo software installed not sure if that could be causing problems. Also having read other forums the mouse i was trying to use was the microsoft 5000 and one of the guys had this working perfectly which leads me to believe its my phone.
Any help would be much appreciated.

Bluetooth stack on HTC HD2
Hi All,
I just got th HTC HD2 and I also run into difficulties connecting a bluetooth mouse. Looks like the problem lies in the Bluetooth stack.
I'm using a iGo/Thinkoutside stowaway bluetooth mouse and keyboard. The software (latest version from 2007) does not recognise that Bluetooth is on.
The keyboard is recognised as a standard HID device and works without any additional software.
I tried the Teksoftco Blueinput software and got the same problem that the software does not recognise that Bluetooth is on. Probably it only works with the MS bluetooth stack and not the one on HTC HD2 (TP2, HD, ...?).
I can connect to a bluetooth mouse but the HD2 can't find any services to use.
Anyway, If anybode has a solution please post but my hopes are verly low... :-(
Maybe a wired mouse via USB host on the car cradle will work...

HD2 with rii mini bluetooth keyboard
Hey, I have not tried to pair my bt mouse and keyboard together, however, I paired my rii mini bt keyboard and both the mouse and kb work! It is awesome. Let me know if you have any questions. Hope this helps.

anyone have the android.apk that comes on the cd?
its not on my cd and i cant pair it with my phone...

I've attached apk for Rii Mini for Android.

gonzalo_reyes said:
I've attached apk for Rii Mini for Android.
Click to expand...
Click to collapse
thanks man...
for some reason its not letting me connect to the net to register it.

rii
Did you have any luck registering, I'm running into the same thing?
No drivers on the cd.

The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!

playdo said:
The software doesn't work on my Touch HD
I tried the V 1.5RC4 but it always displays: "The BlueInput driver is not responding. You need to reinstall this software."
Is it possibly, that I have a altered bluetooth stack with my ROM (Energy)?
Would appreciate any help to get this to work!
Click to expand...
Click to collapse
I had exactly the same problem in my Touch HD with Energy ROM and found the solution. Our problem is because the bluetooth HID libraries are missing in the Energy ROM. Thus, first, you need to restore them by using TRV_Bth_HID.cab attached. Restart. Then, you need to pair your mouse and to ensure, that the service "input device" has appeared and marked in the bluetooth manager. Restart with the turned on bluetooth and the mouse connected. Only after these steps, you can install V1.5RC4. Note, that V1.5RC4 overwrites the library \Windows\bthhid.dll, which was in TRV_Bth_HID.cab. As a result, after V1.5RC4 installation, your mouse will be seen as "disconnected" in the bluetooth manager - this is normal. But, if you need to install new device, you will have to repeat all steps above.

Help
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks

nagagaya said:
Please help if any body found. Rii mini bluetooth keyboard connected with desire hd
Advance thanks
Click to expand...
Click to collapse
you look at http://ipadgeartalk.com/ipad/anker-...5-0-cellphones-computer-laptop-notebook-black

Think Outside Stowaway BT mouse and Keyboard

Hi all,
I ran into a problem trying to get my Stowaway Bluetooth keyb and mouse working. It looks to me as if the new BT stack is the problem. To rule that out I am trying to replace the current stack ( Broadcom is it? ) with one as in the Touch. I guess that would be the Microsoft one?
Anyone can tell me how or where to find it ,and has some experience. Could that be it?
Tnx in advance... Marco

[BUMP] Think Outside Stowaway BT mouse and Keyboard
I am looking for the solution to this as well. I was bummed when I could not use my Think Outside bluetooth keyboard and mouse on my Sprint TP2 as I used them several times a week. Trying to figure out if it is the bluetooth stack or the driver. New drivers are not being produced. Any comments?

Bluetooth Gamepad

Hi all, I currently have an out of contract Tytn II and am looking to upgrade to a Touch Pro 2 soon. I notice that the bluetooth stack appears to have changed and I wondered if anyone knows whether the bluetooth gamepad will work with it? I tried without success to make my gamepad work with my Tytn II and had the same problem with my old Wizard in that it refused to connect. Installing the Widcomm stack on my Wizard made it connect but I have my Tytn II by then. Does anyone know if it works with this new stack? Cheers.

PJDelaney said:
Hi all, I currently have an out of contract Tytn II and am looking to upgrade to a Touch Pro 2 soon. I notice that the bluetooth stack appears to have changed and I wondered if anyone knows whether the bluetooth gamepad will work with it? I tried without success to make my gamepad work with my Tytn II and had the same problem with my old Wizard in that it refused to connect. Installing the Widcomm stack on my Wizard made it connect but I have my Tytn II by then. Does anyone know if it works with this new stack? Cheers.
Click to expand...
Click to collapse
The new stack on the Rhodium is a Widcomm stack, no idea if it works with the gamepad though, but can gaurantee that if it doesn't now, it will be able to in the future. I thought the Wizard had a Widcomm stack by default too........
Cheers,
Beasty

is the bluetooth stack from Broadcom or Widcomm?

gamepad
i heard the gamepad would work with magician. i did some testing with my ralph and got the gamepad to scroll around my menus but my games would not render after installing gamepad drivers. (pocketnester and pac-man) couldnt say why however. with my tp2 i have had very little luck. (i was able to setup a serial port but that was it)

jinx1 said:
i heard the gamepad would work with magician. i did some testing with my ralph and got the gamepad to scroll around my menus but my games would not render after installing gamepad drivers. (pocketnester and pac-man) couldnt say why however. with my tp2 i have had very little luck. (i was able to setup a serial port but that was it)
Click to expand...
Click to collapse
What is magician? Also, on your TP2 do you know what bluetooth stack you are using? and do you run Win Mo 6.1 or 6.5.x?

Alternative to MobileRemote for the Touch Pro 2?

I used to use MobileRemote by MobileSRC.com with my touch pro and it worked great as an easy to use keyboard/mouse combo for my Home Theater PC.
I have been trying to get it to work on the TP2 though and finally I decided to search a bit and found a post on the MobileRemote forums saying that it will not work at all on the TP2 due to the changed BlueTooth Stack (Widcomm) that is included by default on the TP2.
(I believe this is the same thing that causes some issues with TomTom, but that's a different topic)
I was just curious if anyone can recommend a similar program, where I can use my TP2 as the keyboard and a trackpad or an air mouse for a windows PC? If anyone has tested them out and know what works with the TP2 please let me know. Thanks!

there are a couple out there but you have to install a software on the PC and on your device for them to work.
The beauty about MobileRemote is that you don't need to do that so the computer automaticly senses it as a bluetooth keyboard/mouse.
I was also upset that it doesn't work with the Widcomm BT Stack because now i can't use it with my PS3 and it was the only option.
My solution would be to get the MS BT Stack ported over to the Rhodium because the Widcomm stack has caused other issues for me on top of this one.