i just installed gps garmin xt and it say to connect to gps reciver why is doing that i domnt have a recivie and i dont know any clue how i use the gps just im espirementing so any one can help me guys i got experia x1
Psycomatis said:
i just installed gps garmin xt and it say to connect to gps reciver why is doing that i domnt have a recivie and i dont know any clue how i use the gps just im espirementing so any one can help me guys i got experia x1
Click to expand...
Click to collapse
I have Garmin installed on mine and it work fine. It should detect the GPS receiver once program is loaded. If not then check Tools>Settings>System>Remote GPS and see if Com4: Com4: is displayed.
I use Garmin too..and i have not figured out what makes it work.
Fact is, that when i install it and run it for the first few times, it does not work but then it starts working..crazy stuff going on and i am still trying to figure out what triggers it
Psycomatis said:
i just installed gps garmin xt and it say to connect to gps reciver why is doing that i domnt have a recivie and i dont know any clue how i use the gps just im espirementing so any one can help me guys i got experia x1
Click to expand...
Click to collapse
Are you trying this at home? GPS usually doesn't work in buildings. I use iGo8 and have no problem at all with it but outside or in a car. Try going out and the use it- it should work...just wait some time to get connected with a satellite and before doing that download the positions of the satellites with quickGPS. In that way the whole process is faster
Garmin
Psycomatis,is this a new install of garmin and ask you to connect to bluetooth gps receiver?
Garmin.
MOD EDIT
please don't help people with warez.....this is your only warning on this matter
MOD EDIT
don't ask for help with warez.....YOU TOO HAVE NOW BEEN WARNED.
yes
yes mcnaget its asking the gps blutoot cause its automaticallygoes on the bluetooth
Garmin
DeeChan sorry i only want to help.
WTH is warez?
Related
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
I have not tried it with BT GPS, but looking at what everyone else went through with their Headsets and bonding issues, I can defintiely attest to the fact that the new BT Stack on 1.72WWE works great! I have never had to re-pair my Jabra BT 250 since I paired it the first time two weeks ago. I have also been able to ActiveSync over BT without any problems.
Lucky u guys, when i did the update, i cant active sync through BT
first_major:
Try this attached document and see if it helps.
sheran_g,
Thaks alot, all i was missing was to do the active sync profile, your document helped me.
Thaks again
(some) GPS problems with 1.72 (and 1.66)
Victor said:
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
Click to expand...
Click to collapse
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Victor said:
..... I say yes .....
.... unless one tries "the old fashioned way" with BT GPS.
Click to expand...
Click to collapse
I can not remember that NO was an option. Do you mean this with the old fashion way???
Ronald
Hi guys
I'm guessing that the 1.7 upgrade is not avalable in Australia??? I cannot find it on the MyXDA website for download? is this update that you are talking about not for Australia/Asia?
Cheers...
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
You might need to download Adobe Acrobat Reader in order to view the file. You can find the Acrobat Reader here.
dont try dow view the file in IE
Download it first and THEN view it
This works for me
smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
With gozilla I can also not download the pdf, but with "save target as" it works.
@sheran_g
BTW Thanx for the post
Re: (some) GPS problems with 1.72 (and 1.66)
ronald2oo2 said:
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Click to expand...
Click to collapse
Are you sure this isn't TomTom's GPS Driver causing this? TT's GPS Drivers since v2.08 have locked the BT Com Port for exclusive access by TomTom and this prevents other apps from accessing a BT GPS. Solutions are either install v2.07 which was the last driver that did not do this or remove 'the Tomtom~GPS' entry which is the culprit, removing this removes the BT Com Port lock but does not affect the use of TomTom.
@ griffog
Actually I use TomTom ~GPS 3.03 which does not have this problem anymore! Anyhow I still (temporarely) remove the TomTom ~GPS driver and soft-reset when I test with Alturion.
But thanx for the tip.
BTW it does effect the use of TomTom for me! I guess you have a serial (non BT) GPS !?
Ronald
No I use BT GPS unit's exclusively. I'll have to investigate this as I have not heard that v3.03 no longer has this problem!
@griffog
I have this information from the Dutch PocketPC-club TT forum.
It is also consistent with what I see since the TT3.03 upgrade, even while my other GPS application (Alturion) is not working. If I run TT GPS and close it and then start Alturion the Blue LED of the GPS starts flashing fast (sadly I still get "no GPS found" however).
Ronald
:wink: remember you heard it first from me, the Premier GPS Resource :wink:
Excellent news! I've just loaded it up to test and you were right It's such good news that I've posted a front page news item, thanks
Indeed it was very good news.... but therefor also more disappointing for me that I don't get Alturion -my second GPS application- to work (on the eve of my holidays).
If you also use Alturion 5.3.1.4 (you seem in to GPS), can you share your configuration with me?
OS (1.66+?)?, BTHTools or WM serial BT profile? GPS? GPS config in Alturion? and anything else you might consider important.
I really need some new straws to grasp because I have no more ideas about what to try.
Ronald
Sadly Alturion hasn't made it across the channel. I'ce contacted them on numerous occasions for a review copy but never received a reply.
Another cool fix is the fact that you can now be connected through Activesinc using the cradle and at the same time now you can receive MMSs without a problem.
Before the 1.72 upgrade, you just couln't do that. :wink:
HELLO,GUYS
JUST INSTALL THE TOMTOM NAVIGATOR ON MY DEVICE--XDA lls
GOT A CRACK MAP FILE AND THEN ACTIVED IT.
HOWEVER WHEN I RUN IT,THE ''GPS DISABLED''
I CAN NOT TRACK MY CURRENT LOCATION!
HOW CAN I FIX IT UP?
THANKS
DO I NEED A EXTRA GPS RECEIVER?
I THOUGHT THE XDA lls ALREADY GOT A ONE, ISN'T IT?
Nope, you'll need an external GPS receiver
Maybe you mistook GPRS for GPS ?
and : NO NEED TO SHOUT !
hi,thanks
OK! forget the tomtom
if I just wanna a tool to help me track where I am normal when I am a tourist.
what kind programme will you help me advising?
You have the right program, you are lacking hardware, namely a gps receiver.
cheers.
where I can get a valuable one?
The cheapest place that I found is on ebay www.ebay.co.uk
all right!
whcih brand is ok for me ?
do you think the GPS receiver will be a little big only for handy?
I use a BT Polstar receiver on my MDAIII, works great, no problems. eBay 70squid
ski
Greetings,
I have tomtom navigator installed on my XDA IIs and i have polstar bluetooth GPS, BT 111, they both work fine and excellent, but the problem is, the next time when i switch on the bluetooth gps and tomtom on my XDA, tomtom doesnt detect the gps itself, I mean i have to delete the bluetooth entry in the bt manager of XDA and i have to add this new bt connection and all the bt setup again, why is it, can someone please tell me the solution to it, i mean like is it possible tht everytime i switch on tomtom on XDA it automatically detects my bt gps receivers.
Plz, thanks in advance
cheers
First of all make sure you have TomTom Navigator version 5,21 loaded on the device. Then create th ebond between the devices, and set TomTom up to use "Other Bluetooth GPS". If you have done all this how long are you waiting for the XDA to switch on the BT and find the GPS? it can take upto 45 seconds on some devices, if you need TTN5,21 download it from www.tomtom.com as it is free - Mike
I'm running TTN 5.21 on my XDA IIs with no problems, I don't even need to do anything with the bluetooth, it automatically turns on the bluetooth when I start TTN and turns it off when I close, and it automatically picks up my TT BT GPS dongle. Although there is a max 5 min wait to get a valid GPS signal.
I installed the 5.0 version then used the update from the web site afterwards.
Gav
Does anybody know how to get the XDA EXEC to work with BT GPS
FGPXBT02 as I am really struggling to get this device to work. My phone can see the device in bluetooth but when I run TomTom 5 on the phone the program cannot see the GPS device in the "OTHER BLUETOOTH RECEIVERS" section.
Any ideas?
You probably already solved this, but if not. Make an outgoing port to the GPS in WM5 and select it in TT under the other GPS options. Let me know if you need more help.
scousegitt said:
Does anybody know how to get the XDA EXEC to work with BT GPS
FGPXBT02 as I am really struggling to get this device to work. My phone can see the device in bluetooth but when I run TomTom 5 on the phone the program cannot see the GPS device in the "OTHER BLUETOOTH RECEIVERS" section.
Any ideas?
Click to expand...
Click to collapse
And another thing, you will need TT5.21 at least, I believe
Mav
I guess. The TT5 CD's I had crashed instantly on Windows when I tried to install them. On the TT pages there is a workaround to get the map to a Win folder and then copy them over. Also the downloaded update installs nicely.
I'm kind of annoyed at TT, since I have the European maps and figured I'd only need an update for my region. Well the maps from TT5 mobile aren't compatible with TT6 so I'd lose all the European maps. And I think the complete update now gives you a 1GB map with all of Europe - I'd much rather just install the countries I need.
Seeing as I can't get a satellite lock with the internal GPS on my Archos 80 G9 (running stock 4.0.6) I was wondering if it would be worth getting a bluetooth GPS module.
I can pick one up for about £15 on eBay and there are a couple of apps on the Play store that are designed to support these modules.
Has anyone tried one of these with their G9?
What are your experiences?
Alternatively does anyone know for sure if Archos are planning any upgrades to their firmware specifically to address the GPS issues that many appear to be having?
(I know that for some people the internal GPS is working fine on their G9, but it seems it's a bit like the wi-fi issue where some people are unaffected and yet others are having problems)
When you are in the house, you never have a chance to get a signal
Did you try it outside?! And did you wait a little bit?! My Galaxy 5 needs 4-5 mins
to get a fix-sattelite! Normaly you shouldn´t have problems with that...
And Archos is updating their firmware more or less every 4 weeks! So you have a good chance to get a fix for that, if it´s a bug...
Yeah I took my tablet out to an open field last weekend and left it for well over an hour and didn't even catch a glimpse of one satellite.
My daughter has a cheap ZTE phone and can always get an instant lock. Makes me jealous!
Have you tried?
This may seem like a dumb answer but I have found that my 80g9 sometimes loses GPS lock and all satellites if I have been indoors for a while or had the tablet on sleep. If I then turn off the GPS under settings and then re enable the GPS works fine. Hope this helps.
Thanks for the advice but I have tried your suggestion.
I have tried everything conceivable with no success.
It might be considered bad form but I'll reply to my own original question anyway.
I bought a Bluetooth GPS keyring from eBay for £7 inc. delivery and along with the Bluetooth GPS app I'm getting great results.
Might help someone in future...
Extreme_One said:
It might be considered bad form but I'll reply to my own original question anyway.
I bought a Bluetooth GPS keyring from eBay for £7 inc. delivery and along with the Bluetooth GPS app I'm getting great results.
Might help someone in future...
Click to expand...
Click to collapse
hi,
you are not alone
i have the same problem with my 101g9. gps did not work at all since honeycomb until ics 4.07 on my tablet.
can you tell us which gps mouse do you have and which bluetooth app is in use? i'm interesting to hear more about a working combination because archos cannot fix the gps problem for all devices (i guess). seems, i need an external bt receiver too.
thanks for info
I use "Bluetooth GPS" by "Googoo Android" from Google Play to connect.
The receiver is listed on eBay as "Vodafone keyring receiver 51 ch GPS sat nav receiver for laptops and mobiles"
I bought this because it is so small; really handy to keep on my keyring.
The seller seems to have loads of the same for sale.
I hope this is useful.
yep, very useful.
thanks a lot
holux
Hi,
I can use my Holux M-1200 USB Gps, on my G101. It works far, far, better than the built in GPS. It locks on many satellites even in the house.
I cannot use the Archos one on V4.06, only on V 3.2.80 and ONLY with WiFi assist on!
The Archos GPS really sucks!
cheers
P
superpat999 said:
Hi,
I can use my Holux M-1200 USB Gps, on my G101. It works far, far, better than the built in GPS. It locks on many satellites even in the house.
I cannot use the Archos one on V4.06, only on V 3.2.80 and ONLY with WiFi assist on!
The Archos GPS really sucks!
cheers
P
Click to expand...
Click to collapse
hi,
the holux m-1200 can work as bluetooth device or over usb cable. you use it via usb?
Holux Bluetooth
Hi,
Yes, The M-1200 works well on Bluetooth.
There are a number of steps to take to get it working.
1. Install Bluetooth GPS from Play.com
2. Go to Settings and turn OFF GPS, and Google location services
4. In Settings go to Developer options and turn ON "Allow Mock Locations"
5. Pair and connect Holux M-1200 to Archos tablet.
6. Run Bluetooth GPS. On its main page enable mock GPS Provider, and Connect.
7. If it doesn't connect, go to Bluetooth GPS settings and try various settings in "Connection Problems related". ( I ticked all three choices)
run any GPS app, Syric, mmTracker, Google maps, they all work fine!
cheers
Patrick