Related
Hi,
I can't beleive that I have to use 2 lines to show date Item on today with this new ROM! How can I hack the reg in order to optimize space on my today screen?
try this:
Hi Ecraseur,
Edited : I was not able to download your file but found it under another thread.
Seems to work quite nicely. Only question I have, it says "@466" with me, just before the time is displayed. What is this and can it be taken away ?
regards,
Ruud
What is the @NNN number
The @NNN number you see on your display is Internet Time, as defined by Swatch.
http://www.computeruser.com/resources/internet_time/
Best Regards
Hi Ecraseur,
OK, nice read. I now completely understand what it means.
At @562, I was completely informed
Now, how do I get it away as I hardly ever have any need for it.
Or is this not possible. I mean, there are different formats possible for
the date and the time, but the time has no mentioning whatsoever of this Swatch-time.
regards,
Ruud
You can ask to the developper
http://www.pocketpt.net/forum/index.php?act=ST&f=6&t=8229
Greetings,
I'm the developer of TodayTime! I've read all of your comments and suggestions and I'll check the file, make some changes and post a new version later today!
New version will include support for date & time formats either on the left and/or the right of the screen (and maybe the center!), format support for swatch internet time, and font-size overriding.
Please check back later for a new version
Great! Thank you very much for the plugin
Is it possible to add an alarm bell time if it's turned on? Just like the normal WM5 plugin? And maybe the active alarms time too? :wink:
I personally don't use swatch time and I prefer alarm time
The changes are made, i'll test it and upload a new version tomorrow!
YRLS said:
Great! Thank you very much for the plugin
Is it possible to add an alarm bell time if it's turned on? Just like the normal WM5 plugin? And maybe the active alarms time too? :wink:
I personally don't use swatch time and I prefer alarm time
Click to expand...
Click to collapse
Hum... I'll have to check the API for that!
ei99070 said:
The changes are made, i'll test it and upload a new version tomorrow!
Click to expand...
Click to collapse
Hi any update on this?
Hi, i'm posting a little wm_paint bug.
When switching from poirtrait to landscape mode, time is hidden by a scrollbar if any.
Any way to check the existence of the scrollbar?
I'd like to see the clock icon as in the original version also (nuttin important however).
playerkiller said:
Hi, i'm posting a little wm_paint bug.
When switching from poirtrait to landscape mode, time is hidden by a scrollbar if any.
Any way to check the existence of the scrollbar?
I'd like to see the clock icon as in the original version also (nuttin important however).
Click to expand...
Click to collapse
This has been reported, will check that on next update
Please report further bugs/suggestions and check for further updates on this topic!
Old info now, please checkout the new thead here:
http://forum.xda-developers.com/showthread.php?t=391147
looks pretty friggin good to me man. Is there a .cab file you can put together for this?
Putting the final touches on it as we speak
OrganicM said:
I was able to get the TestUIPlugin to work and update in realtime. I used mortscript to get values from "weather watcher mobile", which is free. Currently, you run the script, it loads weather watcher, copies over the forecast data, updates the registry entries for testuiplugin, updates the plugin, and closes weather watcher in the background. It's not very elegant right now, because it uses mortscript. Maybe someone can write a standalone exe based on my work.
Here's what it looks like right now. Any ideas to improve the layout ?
Click to expand...
Click to collapse
I was wondering the same thing as Pudge. It may not look exactly like you've mapped it out in your head...but it looks pretty darn good to me. A .cab would be great, Organic.
OrganicM said:
Putting the final touches on it as we speak
Click to expand...
Click to collapse
One question... This won't somehow change our home layout to the CHome Slim, will it? I like my festively plump slider panels the way they are! lol I just want the weather .cab.
Rip Syntaxx said:
One question... This won't somehow change our home layout to the CHome Slim, will it? I like my festively plump slider panels the way they are! lol I just want the weather .cab.
Click to expand...
Click to collapse
Haha! fesitvely flump? I thought i was the only one who used that term!
Hahaha Actually it WILL, because I wrote this for myself. Buuuuuut, I will make an original version as well
Hey OrganicM, It looks sick but if i could suggest something, then it would be the title, instead of making the "temperature" the title, why not make it My Weather or something along those lines and underneath it - you could make a line for the temperature, upto u - otherwise it looks amazing - Keep up the good work and post a .cab when ur done
Good Luck !
I know, that's what I wanted to do initially, but this damn TestUIPlugin, will NOT let me do two lines of text!! Only thing I could do, is append the current temperature at the end of the forecast blurb... But it wouldn't really make it stand out.
OrganicM said:
Hahaha Actually it WILL, because I wrote this for myself. Buuuuuut, I will make an original version as well
Click to expand...
Click to collapse
That would be awesome. Many thanks.
check the first post
About implementing it to any panels, slim or not...
Hi OrganicM!
Nice job you done with this app.
I took a look at your cab _setup.xml and I was wondering what needs to be changed to the Chome_320x240.cpr for the app to work, since I prefer my chubby panels and its icons and overall layout (just a matter of taste, you know).
Perhaps you could post a little step by step guide for the ones like me who want to implement it by hand, with the needed files in a single compressed file (zip, rar, your choice really, I've already got them from the cab ).
Thanks in advance.
Cheers.
cassiano said:
Hi OrganicM!
Nice job you done with this app.
It took a look at your cab _setup.xml and I was wondering what needs to be changed to the Chome_320x240.cpr for the app to work, since I prefer my chubby panels and its icons and overall layout (just a matter of taste, you know).
Perhaps you could even post a little step by step guide for the ones like me who want to implement it by hand with the needed files in a compressed file (zip, rar, your choice really, I've already got them from the cab ).
Thanks in advance.
Cheers.
Click to expand...
Click to collapse
If I'm not mistaken, I thought he intended to post the .cab for the "chubby panels" soon anyway. I am on the same page with you, Cassiano. I like my plump panels, but I'd like to install Organic's .cab too. I don't necessarily wanna change anything in my homescreen layout--aside from including the new weather panel.
Guys... read the first post.... There might be something there for ya.
OrganicM said:
Guys... read the first post.... There might be something there for ya.
Click to expand...
Click to collapse
Disregard my previous posts! I see you've laid everything out in the 1st post. Thanks man.
Is anyone else have trouble updating the city? I'm trying to get Seattle on here, but it won't find it by name, and if using the zip is keeps showing sunny Las Vagas... That sucks, mainly 'cause it nice there and not here... Thanks.
This thing is awesome. Just what I needed. However, is there a way to remove the photo and media pannel? I tried to edit the XML file but it doesn't change. Any ideas?
Thanks..
Just set the plugins as "disabled" right in the registry.
Updated first post again, this time I added a "last updated" time in the top right corner. This gets updated everytime the weather script runs, so you have an idea how recent the info is.
Alright...for some reason it won't allow my city to be displayed when setting up Weather Watcher. It'll take me to a blank IE screen. I made the change to my city in 'Options', like instructed. Then tried to open 'Update Weather'. It would take me back to the blank IE screen. On the homescreen--the weather sliding panel is blank and just has a sun in it. Is there something I'm not doing?
goboi said:
Is anyone else have trouble updating the city? I'm trying to get Seattle on here, but it won't find it by name, and if using the zip is keeps showing sunny Las Vagas... That sucks, mainly 'cause it nice there and not here... Thanks.
Click to expand...
Click to collapse
Are you sure you're spelling it correctly ? Mine finds it right away.
It is finally here for download, Weather with radar,forecast,hurricane,and a SYSTEM MONITOR!!!!
For Forum Viewers:
I am pleased to release the latest updated version of our weather for wm 6.1.
I have spent lots of hours with Showaco revamping the layout. We are please to see that our old cab had hundreds of downloads, so we're pretty sure you are all gonna love this.
Check it. We have gotten rid of a forecast panel that messes up the layouts for one of your other panels. We went with a complete revolution to the way you display multiple full screen panels, with different info, and pics. Guaranteed no other weather exists like this for your WM6.1 smartphone.
We hope you like it alot. This new forecast will switch between your current homescreen, no matter what it is, EVEN IF IT IS NOT ONE OF OUR LAYOUTS!!! That's right, if you mod your screen, but still want to use the forecast panels, no problem. Just go to the link in your start menu, and it will switch to our forecast panels, and press on any of the forecast days or their right soft key, and BAM. You are right back to your original homescreen. So you can use one of the several layouts we preset for you, or you can make your own. If you do, I highly suggest using Showaco's CPR and DLL switcher app. It is very sweet for us, modders.
Below are instructions on how to install and how to use. Same as before, there are layouts for 5 day,4,3,2 day, and Current Day forecast for the clock, as well as layouts with a monitor with background for the clock or without. I have added several new options in the advanced options menu. One of which is to enable audibles during updates. So, if you want, you can have auditory announcement during the updating process. Use if you want or not. The possibilites are becoming endless.
LOOK AT POST #33, FOR MORE PICS OF OTHER ADDITIONAL LAYOUTS!!!
NOTE: I have added a new homescreen layout for windows mobile 6.1 standard. It is a sliding panel with media homescreen. It is just set up best for our new app. So, just go to the homescreen layouts section at any time and choose, kennys sliding panel. That's it. Your phone will be complete.
Instructions:
******MAKE SURE YOU READ THE UNINSTALL NOTES & BACKUP YOUR REGS BEFORE INSTALLING, IF YOU ARE UNFAMILIAR************
1. Download the cab from xda site from link below.
2. Copy the cab to your smartphone.
3. Navigate, using your phone, to the place that you copied the cab, and click on the cab's icon.
4. You will then automatically begin installing the application.
5. Once install is complete, go to ODSHOWeather Options in your start menu and set up all of your options.
6. Reboot if needed.
7. If weather update has not already been completed at this point. Run weather update. If you are not sure where to start it,
just press on any page in the forecast panel, or access it through your start menu.
8. Enjoy!!!
Uninstall Notes:
If you wish to uninstall the weather app, instructions are as follows:
1. Go to settings and remove programs. Once in remove programs, select the ODSHOWeather WM6.1 Weather
2. It will uninstall, it takes up to a few minutes.
3. If any settings are messed up. Update your regs from before install.
4. To remove start menu links, just navigate using explorer on your phone or pc to remove the lnk to our app. That's it.
5. For any further questions, just Post or pm Outerdepth or Showaco on the xda forums.
Usage Instructions:
1. We have set the clock right soft key to switch to the forecast panels, press it to switch to those.
2. To return to your homescreen, just press the center button on any of the forecast panels or their right soft keys.
3. The radar, hurricane, and air quality pages have center button (actionurl) linked to the apps that update those.
DOWNLOAD LINK: Updated (08-29-2008) at 6:45 pm central time
Download Here
Download Mortscript Cab here
For anyone that needs to find their city code, use this link and change the location in this url to the name of your city and then go to it and it will give a list of all cities worldwide that have that name. Get your location from there and enter it exactly as it appears in the quotes, but do not use the quotes.
http://hadle.accu-weather.com/widget...ation=calcutta
So, for this link above, if you were looking for Calcutta, India. Go to this link, and you will see a line like this:
<location cnt="1" city="Calcutta" state="India(Bangla)" location="ASI|IN|IN036|CALCUTTA" />
So your location to enter in to options would be :
ASI|IN|IN036|CALCUTTA
This should work for cities worldwide.
OMG, looking at this one cannot help but wonder if we really need to know all that sh!t
I agree, it does look very "busy". Heh
jsp_m said:
OMG, looking at this one cannot help but wonder if we really need to know all that sh!t
Click to expand...
Click to collapse
Thanks for the input man. I appreciate it. It is very busy if you have the monitor, but not much busier than it would be with iconbar up top. That has about the same amount of plugins as mine, but I have included a battery meter and system monitor. It's all on one line, just like the iconbar, and with the iconbar removed from the top, it takes up the exact same amount of space. I am sorry to hear that you don't like the busy-ness of it. Just so you know the monitor is an addon. If you don't like it, there are two other layouts without it. So no need to hate. Anything else? That was a really short reply, no other ideas? Well, if you think of something else, please, feel free to respond.
NRGZ28 said:
I agree, it does look very "busy". Heh
Click to expand...
Click to collapse
Hey dude, good to hear from you. I haven't heard from you in a while. It's nice to know you are still around. I hoped you would like the newly updated weather app. I notice you obviously think it looks too busy for you as well, cool. No need for the monitor, that's cool, I know you already have one anyways. I am thinking about making the different plugins for the monitor optional, so you can pick which ones you want and don't. If you think that's a good idea or anyone else does, please, feel free to reply. Hope you're having a good one. Take it easy, brother.
great app! I do have a question/concern...
After I installed it and did several updates, the temperatures for the 5 day stayed the same for a while, but after a few times, they finally adjusted to todays date, but with the same temps as before. Example: for wednesday it said low was 72 and high was 98, after updating it said friday was 72 - 98 even though the sliding forecast panel had the high on friday being 86.
Also, the temp. reading next to the clock stayed at 82 degrees all day and still hasn't went up or down. I live in the south and I know when it isn't 82 lol.
Any help would be appreciated!
Thanks again.
I'm downloading now. Looking forward to trying this out.
Living in the UK, I suspect the radar and hurricane warnings will be of little practical use but hey, I'm connected. I know what's happening.
Off to play with my new toy, will report back ...
I think I can help you
No problem, if you open your reg editor and go to HKLM\Software\Outerdepth\KPWeather, find the entry that says: fupdate.
Change that value to 1. It will run the app in its entirety. This will then reload your screen at the end of the update. What happens on this fupdate=1, is your phone runs the update for the forecast panel.
We didn't want to update the forecast panel on every update, because it adds time to updating the weather, so we have it set to update the forecast days on every 8 times, this updates the forecast panel, and the forecast icons and data on the clock panel. Sorry for the confusion.
I live in the south as well, Memphis, TN. It has horrible temps here, so I understand. I am not sure about it not updating these values for you.
PM me, and we will get to the bottom of this, quickly I am sure. Sounds like a refresh problem that's all. We will get to the bottom of this. Just pm me.
thompsonjdt said:
great app! I do have a question/concern...
After I installed it and did several updates, the temperatures for the 5 day stayed the same for a while, but after a few times, they finally adjusted to todays date, but with the same temps as before. Example: for wednesday it said low was 72 and high was 98, after updating it said friday was 72 - 98 even though the sliding forecast panel had the high on friday being 86.
Also, the temp. reading next to the clock stayed at 82 degrees all day and still hasn't went up or down. I live in the south and I know when it isn't 82 lol.
Any help would be appreciated!
Thanks again.
Click to expand...
Click to collapse
Look at previous post!!
This is for everyone, if you are having trouble getting the forecast icons to change at 1st, look at the previous post, this should update them once you run weather update. I will also upload a reg key for this. It is located below.
Sorry for any confusion. I will make the updated cab fix this, so when you 1st install it, there is no problem. For now, just download this reg key below, install it by clicking on it in your explorer, then run weather update. Thanks.
Edit: I have a new cab with this updating the everything the 1st time fixed. Also, I have left out some pngs on the storage card. The new cab has them. Sorry for any inconvenience. It is not prob. Just download the new cab and it will solve your problems. Sorry about any confusion. Here's the link:
http://www.mediafire.com/?ciaoz0ze4xa
Also, 1st post link is updated as well.
Thanks.
ratstrangler said:
I'm downloading now. Looking forward to trying this out.
Living in the UK, I suspect the radar and hurricane warnings will be of little practical use but hey, I'm connected. I know what's happening.
Off to play with my new toy, will report back ...
Click to expand...
Click to collapse
I hate to bump my own thread.
I have to. I messed up and left some pngs out of the cab for the storage card. It will not update the forecast icons on the clock panel, so this cab fixes that. Everything else should be good. Sorry for any inconveniences.
I have tried everything under the sun to keep this app smooth. Sorry for wasting time for anybody. This is the breaks when writing software. I am glad though, to see that people don't give up. Hope you all enjoy the app!!
http://www.mediafire.com/?ciaoz0ze4xa
That's the new link to the cab.
Edit: I have given this to Faus Zayas from our forums here, this kid knows his sh!t too. He has run the fix, and now all digits update correctly. Thanks to him for being my guinea pig.
Okay.
I uninstalled the previous weather app by NRG which has been trouble-free and installed your cab as per instructions. All seemed well and what appeared to be the present conditions and forecast for somewhere within the 'Rebellious Colonies' appeared.
98F - bugger me that's cosy.
I went to options and input the magic code for the nearest place to me, a town about 10 miles and 1500ft from me, and updated.
'No data available' - I am disconsolate.
I've checked the settings, reset the phone, checked the settings, burned offerings, bought it a beer; to no avail. The cat's made itself scarce again ...
So. What have I stuffed-up?
Does it just need more beer? Or something much more fiendishly clever?
I do like the system bar, although a Bluetooth icon appears even if BT is switched off.
I've made a mess of this haven't I?
*** EDIT ***
Belay that Mr Christian, promptly uninstall our version and replace it with the latest.
Oh yes, and you can stop flogging the cabin-boy now ...
so far, works like a champ!
Thanks for your hard work on it!!
Bugger, I haven't the foggiest, what you just said?
No, just kidding. I understood most of what you said. Either that was for a quick jest or that was a drunken rant. Either way, that was frickin swizzle up in the hizzle for rizzle my nizzle. That's izzle.
Church, Hollah!!!
ratstrangler said:
Okay.
I uninstalled the previous weather app by NRG which has been trouble-free and installed your cab as per instructions. All seemed well and what appeared to be the present conditions and forecast for somewhere within the 'Rebellious Colonies' appeared.
98F - bugger me that's cosy.
I went to options and input the magic code for the nearest place to me, a town about 10 miles and 1500ft from me, and updated.
'No data available' - I am disconsolate.
I've checked the settings, reset the phone, checked the settings, burned offerings, bought it a beer; to no avail. The cat's made itself scarce again ...
So. What have I stuffed-up?
Does it just need more beer? Or something much more fiendishly clever?
I do like the system bar, although a Bluetooth icon appears even if BT is switched off.
I've made a mess of this haven't I?
*** EDIT ***
Belay that Mr Christian, promptly uninstall our version and replace it with the latest.
Oh yes, and you can stop flogging the cabin-boy now ...
Click to expand...
Click to collapse
Hey everyone, I wanted to say:
I am glad the new cab seems to have fixed all probs. I want to add that there are other digits you can use that are in your storage card. They vary in color. You can customize this with these. For now, until I get this as an option. You can just copy the digits in any of the digits folders, and paste them over the originals. Then reupdate the weather to see your reflected changes.
There are many to choose from. Hope you enjoy.
hi
I was wondering if there is anyway I can make ODSHOWeather display in it's own panel and not take over the Carrier/Time panel?
Hi Outerdepth
How did you manage to get myPhoto more than 10 from the pictures files saved in the storage card?
bnycastro said:
hi
I was wondering if there is anyway I can make ODSHOWeather display in it's own panel and not take over the Carrier/Time panel?
Click to expand...
Click to collapse
It could be done by addng a current conditions page to the forecast panel. But not with multiple days on one page, only current for one page and each forecast day with its own page.
Another way is I could write you something that you could map to a key which would let you show and hide clock weather with the push of a button. The change would take a couple of seconds it wouldn't be instant.
Love this app!! Guys feel free to put it in the directorys over at TxCaesar. I have some questions:
the system monitor, seems to show messages when there are none, and the status of the batter is wrong. it almost seems like its just a pic file..am I doing something wrong?
Thanks again for all that youve done!!
TxCaesar
Edit: NVM I think i need to go back to school to read..I reread the first post.
txcaesar said:
Love this app!! Guys feel free to put it in the directorys over at TxCaesar. I have some questions:
the system monitor, seems to show messages when there are none, and the status of the batter is wrong. it almost seems like its just a pic file..am I doing something wrong?
Thanks again for all that youve done!!
TxCaesar
Edit: NVM I think i need to go back to school to read..I reread the first post.
Click to expand...
Click to collapse
Thanks, I've already added it to the downloads sections over there.
showaco said:
It could be done by addng a current conditions page to the forecast panel. But not with multiple days on one page, only current for one page and each forecast day with its own page.
Click to expand...
Click to collapse
can this be done already? I enabled full version of display but still get current conditions on the carrier plug and forecast on it's own panel.
showaco said:
Another way is I could write you something that you could map to a key which would let you show and hide clock weather with the push of a button. The change would take a couple of seconds it wouldn't be instant.
Click to expand...
Click to collapse
this is a feature that is really interesting. if ever it is implemented may i suggest it be added as optional.
again amazing work on this app
Right, im using Itjes 13.2 rom. Its fast & basically all i want in a rom.
However, i want/need to have the next 5 appointments on the today screen like on previous roms.
It literally sorts my life out everytime i look at my phone.
Now however, with the newer version of Manilla i cant get more thn 1 appointment showing on the today screen?
I have searched & posted numerous times about this but cant find a solution & saddly i aint got the technical ability to sort it myself.
I have used the Smaberg cab (just removes the appointments completely from today screen), & also replaced the .dll file from another rom i have used - sadly neither work.
So can anyone point me in the right direction to find a solution ?
Or is it simply not possible with this new version of Manilla (2.1 i believe) ?
Thanks in advance
Hutchy007
I've also posted over in HTC Pedia without any success yet
i'm looking for this too and saw your thread over at htcpedia as well. forget about changing reg-keys and advanced config. this is configured somewhere in 1c684cd8_manila.
i'm at a dead end here after comparing the content from v13.2 with the one which gives you more events. next step, if i get to it, is search xda-devs (especially topaz- and rhodium-forums) and the web, if there's a newer file out. do the same, pls?
or someone who figured it out reads this thread and posts the file.
Guess we're goosed caliban2. Over 130 views & no solutions - just gotta hope its fixable on future releases of manilla !
hutchy007 said:
Guess we're goosed caliban2. Over 130 views & no solutions - just gotta hope its fixable on future releases of manilla !
Click to expand...
Click to collapse
seems that way, at least for now.
problem is htc changed the manila-file... it's only half the size, has different and less lua-scripts in it, that's why the old file doesn't work anymore.
i couldn't figure out so far from where this part of the home-screen is managed in manila 2.1.
needs someone with real coding-skills to do this, but the usual suspects are awefully quit on this.
Check this out, i think thats what u need.
corckie said:
Check this out, i think thats what u need.
Click to expand...
Click to collapse
sadly no, that's the file for manila 2.0
the one for manila 2.1 has about 67 kb in size.
but thx anyway
Fix for showing multiple appointments on Today screen
I found this when searching - it worked for me.
To set options for displaying appointments on the Today screen
If you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Calendar and tap Options.
4. Do any of the following:
• Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments.
• Clear the Display all day events check box if you do not want to display all-day events.
try tf3d tewak tool maybe this could help ya
Come on then peeps.
Someone must have had a dabble at forcing the appointments onto the today screen in the new Manilla.
Again, you will recieve my undying love for this fix. It really makes my phone perfect.
Many thanks,
Hutchy
Is there a cab to get 15 min increments instead of 30 on appointment times? I hate it when I have to work at 8:45 and have to put 8:30 just so I'm not late...
Any advice - I've searched the forum and can't find how to fix annoyances with my standard ROM Touch Pro 2 with HTC's Win Mo 6.5.
1. How do I get weather to update more frequently?
2. I'm mid-summer where I am now which means the sun is up and bright well before 7am. Why the @#&* does my Pro2 insist on showing me a moon until well gone 8am?! The weather app doesn't seem to be sunrise/sunset aware for each location and it seems to think we're all stuck in the middle of some Siberian winter all year around!
Mark
by defualt its set to update every 3 hours if you have auto update enabled.
If you want it to update more frequently use a registry editor and navigate to
HKCU\Software\HTC\Manila\
Scroll down to
Weather.AutoDownloadInterval
and edit the DWord Value which is in minutes
I just set mine to 45.
btw i just found out how to do this by searching the forum for "weather update interval" so try to search next time
98% of the issues your gonna have most likely have been experienced by somebody else
Well, the moon is often still in the sky, even if the sun is out!
Thanks for the pointer fone_fanatic.
Unfortunately that tweak doesn't work for me - the registry key didn't exist, but even creating it made no difference. I see others on the forum (I've found them now I know what I'm looking for) have the same problem.
Btw I did try searching ... but didn't think of that phrase. Which now I think of it is pretty obvious but at the time I tried several other that I thought would point me in the right direction!
You're right - xda-developers is a great forum for solutions and I've found many here. Problem is using honing in your problem on your phone when there's such a vast database.
Anyway - thanks again. Annoying that I can't fix this though!
redpoint73 said:
Well, the moon is often still in the sky, even if the sun is out!
Click to expand...
Click to collapse
Hmm ... ok.
But how about this? It's 10:30pm as I write this and the sun is still showing on my Pro2 home screen!
Make sure you are going to HKCU and not HKLM or the such. Setting that has worked for me for making it update properly for 5 different versions of TouchFlo.
enahs_ said:
Make sure you are going to HKCU and not HKLM or the such. Setting that has worked for me for making it update properly for 5 different versions of TouchFlo.
Click to expand...
Click to collapse
Hi and thanks for the advice, but I have checked and triple checked.
I note plenty of people on the forum are having problems with this so I'm not the only one. Strange that HTC didn't allow a setting for this within the interface somewhere.
WH0A said:
Hi and thanks for the advice, but I have checked and triple checked.
I note plenty of people on the forum are having problems with this so I'm not the only one. Strange that HTC didn't allow a setting for this within the interface somewhere.
Click to expand...
Click to collapse
TouchFLO 3D's weather data seems to come from AccuWeather. (This might vary by the ROM and its intended country though.) Maybe HTC didn't want to risk overloading AccuWeather's servers with too many users updating too frequently.
As for the sun/moon ratio, I don't know where these guys had their heads. My location doesn't change from sun to moon until 9PM, even though by 7PM it's already dark.