i m using i-mate pdal 5.0 mobile since 6 months but when sometimes i install a new software it does not work.Can u help me out?
And even i want to upgarde it to 6.5, is it possible to do so and how?
if the new software require a newer version of .net compact framework
just head on to ms and download and install the newer version on your pda
.net-problem - just upgrade from MS-side
my problem with that is as followes:
whenever i try to upgrade my 3600 says "this version is still at the ROM of your device"
now i am speechless - any idea which could help me???
thxs in advance (am still able to install certain apps, certain not possible ...)
regards, seeraeuber
Related
Hi All
New here so please be kind,
I have an O2 IRL XDA II and wish to update this to the new win version above, I did manage this but lost all conenction settings for MMS, WAP and gprs when done.
Is there some file(Cab?) that can be installed after the fresh install to give me these settings again and if so how is it run?
Thanks
Darren
edited for more details
You must take the file from any one from your friend have a PPC phone edition that runs on win 2003 se
you need the program that opens extended rom and I think you have it , so open your extended rom by clicking on start - programs - extrom tools - unhide and unlock , after that restart your device and open your file explorer and you will see there's extended rom direcory revealed , open it and you will see extended rom installation program file there , copy it to your friend device ,install the extended rom program on his device and open his extended rom like what you did on your device ( don't click on unlock , it will show error on his device ) and you will see his files and the file setting for mobile telecommunications
companies copy the file you want on your extended rom and open your config file that inside the exteded rom directory and add list as list above ( cab ://my device/extended_rom/ (your file name.cab ) )
it will be installed after hard reset automatically
I wish this info's help's you
ur problem
hi...im using an xda2, not upgraded, on the o2 network here in dublin. If i can help, just ask. How did the upgrade go?...was it worth it?...did u get wmp10?.....im thinking of doing it, but would like some feedback first...
need ur advise....
Hi all...
I am a new imate JAM user... I had 1.03 version rom and I upgraded to 1.06 from imate site.. my imate is working fine..
But as I gone thru this forum... I heard of WM2005 beta version is released... I have downloaded the software with Active sync 4.0 but I am hesitant to try with my new imate JAM.. is it trust worthy and can I upgrade my wM2003 SE to this new one..
Kindly let me know ur suggestions..
Thanks and regards
Iffu
Rom Upgrade
Hi Im new in a XDA world, i upgraded my xda II with a 1.72 a uk version and it works ok but i realize that i have downloaded the wrong rom update because im from the philippines could you help me with the rom upgrade from asia could you give me the site where i can download for me many thanks guys. and 1 more thing, how can i set the mp3 as ring and in message alert tone. i really appreciate with your help could you help me guys asap i cannot use my xda thanks.
hello
im also new in the XDA world, and i just bought my first xda1. would it be possible to upgrade to wm2003se? how do i do that?
any help would be greatly appreciated
many thanks in advance
Win 2003SE for indonesia
hi all..
can anyone help me 'bout this?
i want to upgrade my xdaII to win 2003SE with autoconfig for indonesia provider..
can anyone tell me where i can dwld this OS..? or can send it to my email directly..? ([email protected])
Anyway... thx.
Hi Everyone
I have just upgraded my XDA2 to Windows mobile 5 but have the following problems
My I try and sync with Activesync 4 the pc freeze's and resets itself?
Also how do I go about setting up MMS as there is no MMS settings / software installed
I downloaded the Rom from Buzz 160.c
Please help I'm going mad
John
look here
http://forum.xda-developers.com/viewforum.php?f=42
or try search i'm sure most of your problems have been happening to others
Where find WM5 ROM
I've see you already install the WM5, i really need to find that ROM for my XDAII can you give me a link to find it. I've try to buzz website but found ROM for Himalaya and the ROM version is 1.60.00WWE. I already upgrade my ROM into 1.72.00WWE from www.o2.co.uk but the OS is WinCE 4.20.
So is it ok to upgrade my O2 XDAII ROM with Himalaya XDAII ROM ? If something wrong can i rollback with older version ?
You cannot compare ROM numbers from (un)official WM 2003(SE) ROMs with those of unofficial WM 5.0 ROMs.
WM 5.0 1.60c ist much newer than WM 2003 1.72.xx
Sascha
Hi all,
I'm loving the WM5.0 ROMs, however I cannot seem to get GoodLink to install (it claims my version of WM is unsupported). I've noticed for some other platforms, people have managed to change their WM version number to effectively combat this (fooling GoodLink to install).
Any idea how I can change the WM version number to fool GoodLink to install?
Any help would be greatly appreciated.
if you provide me with the install cab i may help, but first i have to look at it
Sure, I've uploaded the install cab here.
Thanks a lot.
First i think this is smartphone release, not pocketpc one, second your link does not work
Apologies.
Here is the correct file. I selected the wrong one
Matt
I dont know what this software is, and how to configure it but here is working WM5 cab of it, it installs and the some kind of setup wizard comes up, and then it asks for email and for pin
Thanks for your help. However, the issue with GoodLink is that it does a check after you enter your PIN on the WM version. At this point, it sees my BA is 5.1 (not 5.0) and fails the install.
I've seen other ROMs change the version number to avoid this problem and didn't know if it's something that's easy to do (either via a hex editor or a registry fix).
Cheers,
Matt
it is compatible with older wm5 roms without the 5.1 core, i am not sure where is the correct address to change for blueangel
and i think that it is time for them to update their app, there are no WM 5.0 devices anymore on the market
Thanks xplode, I'll try finding, downloading & installing a 5.0 ROM tonight then and see if it all works.
Agreed that they should update their software!
Matt
Just a followup to the above, I cannot seem to find any older images for download, the earliest I can find is "xplode_AKU3.3_Beta1_R1.rar" which still has a 5.1 core.
Any ideas where I can get an older WM5.0 image from? I'd go back to 2003, but that's not supported either (between a rock and a hard place with GoodLink!)
Matt
Please could someone help me out with upgrading my O2 XDA Orbit?
I've had the device from new for just over a year but I've never been able to update it via the "Windows Update" function within settings/system, I'm currently running ROM version: 3.4.206.2.WWE dated 18/4/07 and Windows version CE OS 5.2.1238 (Build 17745.0.2.3).
Ideally I’d like to “safely & reliably” upgrade it to WM6.1 but if that’s not possible then the latest version of WM6 with as many bugs fixed as possible, an idiots guide would also be appreciated!
I apologise but I’m on a really bad connection at the moment and it’s taking forever to navigate from one page to another, if this information is already available please point me in the right direction.
Many thanks
SGL
Instruction
1. Remove your MicroSD Card
2. Download this: http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
Manual for this: http://forum.xda-developers.com/attachment.php?attachmentid=41247&d=1181558782
3. Start start_uspl.exe you must have a connection via Active Sync
4. Now you are able to Install any Artemis-ROM from this Forum
As far as I know USPL (2.) only works with Windows XP
Excellent, thank you for this.
Are there any recommended ROM's?
http://forum.xda-developers.com/showthread.php?t=462852
it's your own decision. There are also a lot of good Manila 2d ROMs, which looks like this
http://www.youtube.com/watch?v=vGACjp0Adcg&feature=related
I actually have [wwe][5 Dec 08][wm 6.1_sheen_no_nonsense](clean) with SPB Mobile Shell
Please don't asked where to find these ROMs, use the search button
Thank you very much for this.
sorry i am a bit of a beginner with all this but very confused. I want to upgrade my wm5 loox n500 with windows mobile 6 so i can run certain apps. I have read all the forums and i have downloaded the rom upgrades which say they will change my pda to wm6 - file appears to be os_122u.nbf. however after doing this which all appeared to go successfully my apps will still not run and it appears when i check that i am still on wm5
what am i doing wrong ? have i downloaded the wrong image / duff image ?
is there a dummy guide to upgrading the n500 anywhere ? is it the same for upgarde purposes as a n520 ?
any help appreciated
Craig
just by way of update after supposedly upgrading to wm6 it now says i am on version 5.1.464,
rom revision p224452-p919-v122
rom date 2006-09-20
bootloader revision 1.05
if this means anything to anybody ?
" 5.1.464"
== windows CE 5 which every windows mobile since wm5 have been build
on
where windows mobile 7 should use windows CE6
thanks Rude, just not sure how that helps me - or am i missing something ?
it gave you a version number to search if thats a 6.x version
another thing you can see is if you got threaded sms's it's one of the
few differences between wm6 wm5 apart from the glossy top panels