Menus and Touch Flo 3D - Touch Pro2, Tilt 2 Windows Mobile General

I like Touch Flo 3D, but I don't like the big menus in "contact", "word", "excel", ...
I know if I disactivate "Touch Flo 3D" from the today elements, the menus are back to normal, but obviously I don't have TF3D anymore.
Anyone know how to have both "Touch Flo 3D" and "the standard Windows Mobile menus"
Harvey

Not possible so far. Haven't find one yet myself, unless you used other tool like MTP (Manila Today Page) to link your WM today page.

u can use a software named second today
use this software u can use 2 todayitem

bqwd36 said:
u can use a software named second today
use this software u can use 2 todayitem
Click to expand...
Click to collapse
Tested, work great on my TP2 and work better (switch from MTP to second today).

HarveyR said:
I like Touch Flo 3D, but I don't like the big menus in "contact", "word", "excel", ...
I know if I disactivate "Touch Flo 3D" from the today elements, the menus are back to normal, but obviously I don't have TF3D anymore.
Anyone know how to have both "Touch Flo 3D" and "the standard Windows Mobile menus"
Harvey
Click to expand...
Click to collapse
With a registry editor, go to:
[HKEY_LOCAL_MACHINE\System\GWE\Menu]
"CUIHandler"=dword:00000000

Tested and works !!! Exactly what I was looking for, a registry tweak and that's it ! Touch Flo 3D + normal manus. Thanks again. This hack should be put in the hack list ? Who should do this ?
+ you can go for a beer for that good job !
+ I was about to add it in the tweak thread, but I think it would be more faire if you add it yourself ark666. I'll do it tomorrow if no one else does it until then

I tried this edit but it did not work. i have the stock verizon rom and that is the only tweak i have done. i just got the phone.

psycho_maniac said:
I tried this edit but it did not work. i have the stock verizon rom and that is the only tweak i have done. i just got the phone.
Click to expand...
Click to collapse
Did you reset the phone before you posted? If not, did a later restart give you the effect you were looking for? That worked for me.

wow tried this and i think i like the htc menu's a lot beter. there not as ugly. i am running 2.1 manila with 6.5 rom

Related

dutty supa dupa button flo rom beta ( Available Now)

Based on supa dupa base rom i have made my second touch\button flo rom which is cooked in.
This rom are for the people who wants touchflo but will do with button flo.
For all those who wants to change to the touch dialler you can by unselect it using shaps config to default to wm6 dialler.
What it contains : 6mb page pool fast like lightning trust me
Supa dupa cab package is available here for add ons
http://rapidshare.com/files/53220404/supa_dupa_extra_addons.zip
a. Total storage 67.04 free
b. HTC touch audio manager (614.712)
c. HTC music plug in (601.718)
d. HTC home plug in (720.719)
e. Touch settings v1.22 by carlos to customise touch/button flo
f. shaps 3g touch comm manager
g. latest windows Live (10.6.0030.2100)
g. windows mobile 6 sounds activated
h. nice touch start up screen credit to itje
i. Shaps advanced config 1.0
j. Network plug in (29714)
k. Network wizard (29982.1.0.2.2)
l. HTC BT Quicklink 0.4
m. TaskManager_1_51_30470_1
To activate touch\button flo
1. assign touch flo to any hardware button of your choice
2. default to audio manager in touch settings.
3. activate music plug in in today settings
4. before activating touch flo click on biotouch in touch settings to activate first then activate touch flo
5. when keyboard is sliden out touchflo wont work, If you need to activate button flo again you need to click on biotouch and then touchflo.
I got the cube working for a day without black screen, but when reset it goes to black screen and you have to reset wait 10secs activate biotouch wait 5-10 secs and then activate touch cube. you might have to do this more than once. the trick to touch/button cube is if you get it activated and you dont reset your device frequently its worth it.
I have been really busy these last days so i haven't get time to finish the rom but it's 90% finished.
I have been using it for awhile now and everything works including mms/sms.
Link to rom
http://rapidshare.com/files/54334202/dutty_Touch_I_beta.zip
I havent been here for a while been so busy at work and also problems with the family so please forgive me if I havent answered any posts/questions of recent.
space reserved
For Updates Only
hmmm working touch flo... sweeeet I can't wait for that! Can you also include HTC Voice Recorder? When we can expect a download link?
duttythroy said:
For Updates Only
Click to expand...
Click to collapse
i beg you please drop the 3g dialer! thats the only hang up!
tomme45i said:
hmmm working touch flo... seeeet I can't wait for that! When we can expect a download link?
Click to expand...
Click to collapse
not fully touch flo but prevoked by assigning touch flo to your favourite hardware button. Still works sweet, this is might be the nearest we get to touchflo on hermes.
im uploading beta 2 with 8mb page pool super fast
im gonna make touchflo one 8mb pp and 12mb pp ultra fast i go 1 and 2 betta duttythroy kiddin mate,
jdac21
jakeypoo said:
i beg you please drop the 3g dialer! thats the only hang up!
Click to expand...
Click to collapse
I tried to keep it as 50-50 for everyone some of which who wants 3g as this one is very hard to implement as cab so its easier to cooked it in and then install a 2g dial. there is a touch 2g dial out there i will install the cab and see if it interferes with the 3g dial.
jdac21 said:
im uploading beta 2 with 8mb page pool super fast
im gonna make touchflo one 8mb pp and 12mb pp ultra fast i go 1 and 2 betta duttythroy kiddin mate,
jdac21
Click to expand...
Click to collapse
cheer mate
duttythroy said:
Based on supa dupa base rom i have made my second touch\button flo rom which is cooked in.
This rom are for the people who wants touchflo but will do with button flo.
What it contains : 6mb page pool fast like lightning trust me
Supa dupa cab package is available here for add ons
http://rapidshare.com/files/53220404/supa_dupa_extra_addons.zip
a. Total storage 73.94 free 70.15
b. HTC touch audio manager
c. HTC music plug in
d. HTC home plug in
e. touch settings v1.22 by carlos to customise touch/button flo
f. shaps 3g touch comm manager
g. htc shaps home
g. windows mobile 6 sounds activated
h. nice touch start up screen credit to itje
To activate touch\button flo
1. assign touch flo to any hardware button of your choice
2. default to audio manager in touch settings.
3. before activating touch flo click on biotouch in touch settings to activate first then activate touch flo
4. when keyboard is sliden out touchflo wont work, If you need to activate button flo again you need to click on biotouch and then touchflo.
Click to expand...
Click to collapse
Now you approach my desire Rom slowly
S64
dear god post it up alraedy im dieng to play with it lol
starbase64 said:
Now you approach my desire Rom slowly
S64
Click to expand...
Click to collapse
you love it in it.
just testing the rom by installing cabs to see any imcompatabilities should be up hopefully tonight
duttythroy said:
you love it in it.
just testing the rom by installing cabs to see any imcompatabilities should be up hopefully tonight[/QUOTE
update please
Click to expand...
Click to collapse
Fore play is good man
update
The rom it self is very fast and responsive still got some trouble with the cube to start after reset.
It works great upon first boot but when reset it start the black screen phase, still looking into it.
I need some beta testers who really dont mind testing it and hopefully finding solutions.
I know this is a dead story regarding touchflo working on hermes but I got the touch.dll cooked in so there must be a small chance of it working even as a buttonflo
I will be doing some priavte beta testing first before I release it public if I can get some true hearted touchflo alcholics who will not moan and complain at all times an will help come up with solutions and answers please pm me for details.
http://forum.xda-developers.com/attachment.php?attachmentid=48967&d=1188715091
this ver of schaps adv config works.
for some reason i cant gegt the cube to come up at all, even after i flashed it i didnt restart it cuz i knew that it might not come up, and it still didnt come.. just the balck screen another little glitch is thatmy phone doesnt vibrate with this rom for some strange reason.
@dutty, I collect this file from another forum, try and if is good, take this to the collection.
Jbed Midlet Manager Build 20070802.2.1 (It doesn't expire! )
Waiting.......
Waiting.......Please post
tHANKS FOR YOUR FEEDBACKs its been really hard to find the time sometimes to work on the roms especially this week with so much demand at work. i will try and release the button flo rom sometims this week if i think its not ready i will abandoned the project and re-do all the supa dupa series as I fixed all the mail issues in the touch rom
@dutty, good news about supa dupa lite I transform for me to a pagepool 8MB and I decide make another try, very slow... setting by setting with some soft-resets on the midle, then app by app... wizard network for my country settings carrier Vodafone PT, I create 3 email accounts... I configure the video-call... the MMSsettings and the respective connection..., the WI-FI and is the end for now, I soft-reset one more time and I test all, the good news is all work I send and receive emails, mms (created from MMS section and not from SMS/MMS) and SMSsssss.
Now... I go sleep because I work near a few hours and ASAP I write more about the experience from this point, ok?!
Best Regards
***the supa lite beta for me no good... look the email probs

[REQ] Shortcut that restarts TF3D

Like many of you, I'm constantly trying to modify my manila files and TF3D. To see the results one must reset TF3D by clicking Start>Settings>Today>Items>TouchFlo 3D then exit, re-enter and enable it.
With that being said, can anyone create a shortcut that can be place in the start menu or programs tab that does that process with the click of a button?
Manila Control by matsogo!
Here you are
http://forum.xda-developers.com/showthread.php?t=447504&highlight=manila+control
I've read that some people have troubles with manila control on HD, but at the moment I don't have an HD to test, I'll get it monday(I hope).
I'll test and report.
davideuck said:
I've read that some people have troubles with manila control on HD, but at the moment I don't have an HD to test, I'll get it monday(I hope).
I'll test and report.
Click to expand...
Click to collapse
Ok great, thanks for the link!
without using any 3rd party apps, patch, hack, i'll do it this way:
slide to settings, tap "modify tabs", tap "done"
and voila: TF3D restarts
not sure about the english wording as my device is actually german.
restart whit button program
is did what your looking for.its a program to change everything for tf3d,and if you instal this you get a extra program for restart
sitaniace said:
is did what your looking for.its a program to change everything for tf3d,and if you instal this you get a extra program for restart
Click to expand...
Click to collapse
compatible with HD??? i've saw this app on diamond. but dont know if this is compatible with HD. any confirmed answer? thanks
JohnQ said:
compatible with HD??? i've saw this app on diamond. but dont know if this is compatible with HD. any confirmed answer? thanks
Click to expand...
Click to collapse
Hi
it is compatible!!!
ciao from Shanghai
6Fg8 said:
without using any 3rd party apps, patch, hack, i'll do it this way:
slide to settings, tap "modify tabs", tap "done"
and voila: TF3D restarts
not sure about the english wording as my device is actually german.
Click to expand...
Click to collapse
absolutly correct!!!!! i think this is the fast way to restart TF3D without any addictions.
ciao

Get background for all tabs with itje's 5.xx

Since I installed itje's 5.xx rom I have been looking for a way to put a background for all tabs, but evrth I install would mess up something else (the clock), or even worse it would work but in portrait it'd be zoomed in, and after lots of trial and error I finally reached the best combo.....
What I did was that first I installed " Plain HD TF3D " and then " mUn bg4allTabs_stockLike_v1"...
this is nth gr8 but i hope this will help anybody out !!
let me know if it works !
Edit: If anybody thinks this thread is useless plz remove it
and i take no credit for the files uploaded all thnx go to those who developed this great apps !
Very nice, I tried it and it works. Now I have nice backgrounds in all stock tabs,
btw does the ultimate version work?
Mun_rus' original post
http://forum.xda-developers.com/showpost.php?p=3273729&postcount=1
I didn't try that out because I prefer having the background only in the tabs.....you could try that out and if it works share it with everyone
I'm happy this helped someone out
reallylame said:
Very nice, I tried it and it works. Now I have nice backgrounds in all stock tabs,
btw does the ultimate version work?
Mun_rus' original post
http://forum.xda-developers.com/showpost.php?p=3273729&postcount=1
Click to expand...
Click to collapse
Yes, ultimate works well. Very bling bling.
Tried it and looks nice but stops the new style HTC start menu from working!
Anyone found a workaround, would really like them both.
Im too. When I install it, I have a nice background, I really like it. But start menu not work. Who can helf me? thank a lot!
here try this cab....it'll restore the old style start menu
on a personal note though my experience taught me that bg4all tabs slows down tf3d....so the best idea would be to learn making your own manila bg,,,or post the bg you want to have here and i'll see what i can do (specify your rom)!!
darkhalf520 said:
here try this cab....it'll restore the old style start menu
on a personal note though my experience taught me that bg4all tabs slows down tf3d....so the best idea would be to learn making your own manila bg,,,or post the bg you want to have here and i'll see what i can do (specify your rom)!!
Click to expand...
Click to collapse
Thank for your helf. But Im still want use back ground all tab. Could you helf me. What will I do for start menu still work well in itje's 7.1 Room?
staythesame said:
Thank for your helf. But Im still want use back ground all tab. Could you helf me. What will I do for start menu still work well in itje's 7.1 Room?
Click to expand...
Click to collapse
I just told ya .....install the cab i attached in the post above yours !
let me know if it works
darkhalf520 said:
I just told ya .....install the cab i attached in the post above yours !
let me know if it works
Click to expand...
Click to collapse
Thank u! But when I install two *.cab above, all background ok. But when I klich in start menu it don't work ( I used start menu of Touch-IT v7)).
restart your device....you will get the normal "old" start menu
For Touch-It V7.0 USERS:
install only mUn bg4allTabs_stockLike_v1.cab
its works fine by me!!!
And my general advice ramains ....LEARN TO MAKE YOUR OWN BACKGROUND WITH MANILA EDITORS !!!
really i can't emphasize how better this is ....much much faster !!!
londa88 said:
For Touch-It V7 USERS:
install only mUn bg4allTabs_stockLike_v1.cab
its works fine by me!!!
Click to expand...
Click to collapse
I install mUn bg4allTabs_stockLike_v1.cab, restart. But when I click to start menu, not activities, I can't see new menu or old menu.
When I unstall (remove) mUn bg4allTabs_stockLike_v1.cab. I can use start menu (new menu - as basic 7.1 Room). But when I click to messages tab in touchflo3d, I can't opent my messages and, then touchflo3d have some error. restart touchflo3d or dont open.
Thank your helf. But I think this cab not suitable with my X1. I should re-up and content use itje's basic 7.1 room
I want their ringtones too someone help me pleasee.
staythesame said:
I install mUn bg4allTabs_stockLike_v1.cab, restart. But when I click to start menu, not activities, I can't see new menu or old menu.
When I unstall (remove) mUn bg4allTabs_stockLike_v1.cab. I can use start menu (new menu - as basic 7.1 Room). But when I click to messages tab in touchflo3d, I can't opent my messages and, then touchflo3d have some error. restart touchflo3d or dont open.
Thank your helf. But I think this cab not suitable with my X1. I should re-up and content use itje's basic 7.1 room
Click to expand...
Click to collapse
About the messages tab, it has nothing to do with this cab. You can find the fix on itje's Touch-IT v7 thread on page 40.
does anybody know where itje got his background in the 5er series of his touch-it rom? Want this floral background back
DonGeilo.....here is it .....just extract these 4 file in windows directory using total commander.....let me know
nope...get the standard background thats in the rom...
try restarting your phone !

Few unfixed problems in the kitchen

Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom
yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom
Thanks man!
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps
Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.
I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?

BG4all Manila 3.0

Forgive me if this has been sloved, but I have searched for over a week and come up with nothing.
I have tried m9editor, HDWall, ThemeGenerator all with no success with regards to getting the same background on all the TF3D tabs.
It seems that all of these are designed for Manila 2.5
So, has anyone come up with a method or app for achieving this in the new manila?
A point in the correct direction much appreciated.
I do think that you are reffering in deed to Manila 2.5 instead of 3.0. As far as I know there is not any 3.0 out. But I am having the same problem with the last manilla version, mine is 2,5.19202525 and the fix that was created for old 2,5 is not working any more. When I have tried to install the all back grounds for all tabs I had to hard reset my device, because it was allocating some weird squarte close to the clock at the home tab. Therefore I am also waiting for any fix or any solution that could work for the last manilla version.
nickallison said:
Forgive me if this has been sloved, but I have searched for over a week and come up with nothing.
I have tried m9editor, HDWall, ThemeGenerator all with no success with regards to getting the same background on all the TF3D tabs.
It seems that all of these are designed for Manila 2.5
So, has anyone come up with a method or app for achieving this in the new manila?
A point in the correct direction much appreciated.
Click to expand...
Click to collapse
From: Start>Settings>System>Touchflow>About
Version 3.0 (Build 1914.2028)
Latest Orange Branded ROM as detailed in thread
http://forum.xda-developers.com/showthread.php?t=552366
nickallison said:
From: Start>Settings>System>Touchflow>About
Version 3.0 (Build 1914.2028)
Latest Orange Branded ROM as detailed in thread
http://forum.xda-developers.com/showthread.php?t=552366
Click to expand...
Click to collapse
If you check the settings tab on Touch Flo instead, it should say something like:
About
TouchFLO 3D 2.0.37889.1
Which is what mine says. This means my touch flo is version 2.0 (from the 2.0.37889.1). Therefore, check yours and search the forums for this. You should also back up your data before trying any of them though as my experience is that these can sometimes mess up your today screen if you don't get it right!!!
On the TF Settins Tab:
About
TouchFLO 3D 1.3.37395.3_1630.38
So does this mean that it is version 1.3 as your post would suggest?
Maybe this is why the App's don't work?
nickallison said:
On the TF Settins Tab:
About
TouchFLO 3D 1.3.37395.3_1630.38
So does this mean that it is version 1.3 as your post would suggest?
Maybe this is why the App's don't work?
Click to expand...
Click to collapse
that is correct...
what device do you have. i would look at ppcgeeks. they have a section for manila (aka touch flow 3d) tweaks and mods. let me know if you need anything. as i have all these files still just need to make a cab of them. are you on a stock rom? make sure you pm me as im very rarelt on xda anymore and finding this post will be difficult
by the way touch flo is the app that makes it scroll with your finger through windows or any app. and touch flo 3d is the interface that your using
Thanks for the advice.
Having a look through ppcgeeks.
Device is an Orange branded Touch HD. With latest Orange issued ROM (as detailed in post above).

Categories

Resources