Related
How to update your rom to the latest I-mate version (with push email) and Radio 1.09.0 using the MaUpgradeUt_noID.exe method
1 – download the file “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” from the ftp site (see bottom of post for details)
2 - double click the file and allow it to unpack into a folder
3 – right click on the active sync icon in your tasks tray on you pc (at the stage you should NOT have you universal plugged in)
4 – select connection setting then untick “allow USB connections”
5 – Now take your Universal and take out the SIM and MEMORY CARD
6 – Press light + power + reset with the phone on, this will place the universal into bootloader mode
7 – Connect your Universal via the USB cable to your computer directly i.e. not though a USB hub
8 – Now double click on the program called “MaUpgradeUt_noID.exe” (found in to folder from step 1) this will start the upgrade process, the first stage takes about 3 to 5 minutes to complete, you will then be presented with a screen showing a “Imate Jam” and some information about what you are upgrading to, don’t be worried if this screen does not show you the version numbers you have at present that is normal.
9 – Now continue with the process by clicking upgrade/next
10 – After sometime (about 20 minutes) you should be at the end screen tell you to unplug and reset you “jam” So now unplug your universal and reset it and that’s all there is to it!
Note that during the upgrade process you can follow the progress by also looking at your universal screen with a light source as the backlight will be off.
I hope this post helps someone as looking around the forum Im amazed by the amount of people asking “how do I upgrade my rom” or “I only get a “country id error” when trying to update”
The “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” file can be found here
ftp://xda:[email protected]/Uploads/Universal/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains the latest imate beta rom v1.30.68 and the latest radio 1.09.0 plus all the tools you need
Oh and if anyone thinks Ive missed something out please post and let me know!
File as been moved its now at :-
ftp://xda:[email protected]/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains everything need to upgrade your universal
Thanks rat - very cool of you to post up a guide. How Nb is it to remove your SIM?
wamatt said:
Thanks rat - very cool of you to post up a guide. How Nb is it to remove your SIM?
Click to expand...
Click to collapse
No sure I understand the question however Ive updated before now with the sim card in however lots of people report that its important to remove both the memory & sim cards so Ive included it because its better to be safe than sorry
Thanks I'll play it sorry :/..
BTW do you have to use this NOID method if you have an IMATE too?
wamatt said:
BTW do you have to use this NOID method if you have an IMATE too?
Click to expand...
Click to collapse
No you should be ok using the orginal package, however this way will still work
I installed the ROM but after the installation is finished and I reset the device I only get a blank screen.
Piesang said:
I installed the ROM but after the installation is finished and I reset the device I only get a blank screen.
Click to expand...
Click to collapse
Blank screen but do you have the USB or SERIAL written on the Screen?
Rat didn't mention in his post but it comes out in the last screen that it is supposed to be a HARD RESET which will bring about a menu where you have to press 0 (Zero) to ahrd reset the device. hope this helps
Yip, sorry, That's correct. I get the screen that says I have to press 0 to reset or X to exit.
If I press 0 the screen goes blank and stays like that.
I've installed the previous ROM now and it is working perfectly. It's just the new ROM on this page doesn't want to work on my Jasjar.
Piesang said:
Yip, sorry, That's correct. I get the screen that says I have to press 0 to reset or X to exit.
If I press 0 the screen goes blank and stays like that.
I've installed the previous ROM now and it is working perfectly. It's just the new ROM on this page doesn't want to work on my Jasjar.
Click to expand...
Click to collapse
I downloaded it straight from the first post and it installed flawlessly...
Have you tried installing it from bootloader mode instead of direct update? And without SD card in the PDA? This might work.
BTW, I have returned to the older ROM.... advantages don't outweigh the disadvantages.
My phone keeps on hanging (for the 1st time ever after 5 months use and different ROMs) on the screen where it shows whose calling. I havent answered the call yet but it stops ringing. When i open the PDA it has ANSWER on the left softkey and pressing this doesn't do anything. Will wait for the release..
It is a lot faster thought (the test ROM)
Thanks for the info. I'm not gonna bother upgrading now. I'll wait for a decent ROM later.
Thanks m8
umm - stupid question I know.....
But what does this actually DO??
I understand that this will upgrade the radio stack and thus produce better reception etc - but what else will it do??
If I have an Orange M5000 will I still be able to use it on Orange's network?? Do i need to fill in any settings? Do I need to make notes of certain stuff beforehand? If so - what settings?
I assume this will totally rewrite the registry and what programs are on teh device - or will it??
I suppose a lot of this information is available on the forum - but tracking it down can take a lot of time for someone who's not necessarily that 'au fait' with the working of the device.
Riceburner said:
umm - stupid question I know.....
But what does this actually DO??
I understand that this will upgrade the radio stack and thus produce better reception etc - but what else will it do??
If I have an Orange M5000 will I still be able to use it on Orange's network?? Do i need to fill in any settings? Do I need to make notes of certain stuff beforehand? If so - what settings?
I assume this will totally rewrite the registry and what programs are on teh device - or will it??
I suppose a lot of this information is available on the forum - but tracking it down can take a lot of time for someone who's not necessarily that 'au fait' with the working of the device.
Click to expand...
Click to collapse
I also have an orange M5000 which I would like to get off Orange to use my Vodafone SIM - would installing this new ROM be the way to go ?
not if your phone is simlocked (or network locked). new rom is only the software.
Yeah, sorry
Just reading the other thread on this - sorry , am a relative newby.
It looks like MachineGod and Buzz are on the case though - and with their track record........
I wanted to confirm that Ratcom's file he linked to is good (not corrupt) and his method for upgrade works. Nice work, Ratcom.
ratcom said:
File as been moved its now at :-
ftp://xda:[email protected]/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains everything need to upgrade your universal
Click to expand...
Click to collapse
Hi ,
Can let me know the speed of the Os did u face any problems after upgrade.
E.g Apps, Hanging , Memmory leaks. Etc. Cheers
I had no problems what so ever with this rom, the speed of the os was breathtaking.
ratcom said:
I had no problems what so ever with this rom, the speed of the os was breathtaking.
Click to expand...
Click to collapse
Does this rom work on dopod 900?
Is this is final release?
Cheers,
Hello,
I've read so many posts about this nice little plug-in, and found a couple that seem to have the exact same issues as me but no solutions/aswers has been posted. I'm hoping someone in here can shed some light onto my ignorant mind.
I have an HTC branded TyTN (Model name HERM200). I have flashed it with the official HTC Swedish WM6 upgrade ROM. Now I've found this nice HTC HomePlugin that I wanted to use. I've tried many different versions but I have the same problems with all of them.
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Chrisofsweden said:
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Click to expand...
Click to collapse
Hi !
Same here with the "HTC Home Plugin v2.1 (patched by N2A)" found at http://www.pocketemu.com/download8.html on a Touch Dual, with French OEM ROM !
1. Cant' add a working shortcut into the Contacts tab : the name appears but when I tap on it, nothing appens
2. Showing a "Folder" icon into the "Sound Profile" tab
3. Showing a "Folder" icon when adding a HTC App only into the "App" Tab : ie. "rotate" or "backlight" adjustment app
4. The weather is working.
The language is French, on a French ROM, but in HTC Home Customizer 1.0, the selected language is "US English". When I switch to French, the language in HTC Home is English...
Any ideas ???
Thx
Try this here. Should be what your looking for.
I've tried this one already:
"Update 17 November 2007 New Version 2.1.1005.722
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
http://rapidshare.com/files/70343559....schen.cab.zip"
Does not work. What I don't understand is where to get these...
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
...and if this is meaning it only works on an English language WM6:
- This is 0409 English version.
HELP!
I've tried this one already:
"Update 17 November 2007 New Version 2.1.1005.722
1. Install on HTCHome Dir and With Brghtnes Fix for Hermes
http://rapidshare.com/files/70343559....schen.cab.zip"
Does not work. I've tried following:
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
Installing these does not help either
On another note, does this mean it only works on an English language WM6?
- This is 0409 English version.
HELP!
Nah, should work on other languages as if you read through previous link I give ya, it worked on a spanish rom.
Does not work. I've tried following:
- If not working properly, Try to install sdkcerts.cab.
- If still not working properly, Try to Install cert_SPCS.cab
Installing these does not help either
Click to expand...
Click to collapse
I'll see what I can dig up
Thanks alot!
It doesn't seem like its the certs that stop it from working since
it loads up correctly. It's just the stuff mentioned in the first post that does not work... launcher, quickdial, musicplayer and weather.
Does it require WM6.1?
Did u manage to dig up anything? I'd really like to have it working.
If you are running a swedish rom you need to chenage some things in registry, or find the hhcv08.cab to customise the plugin, if I remember correctly you can change settings for language.
I also recall posting n the subject some time ago, do a search on my previous posts.
try this... I run it smoothly.
Chrisofsweden said:
Hello,
I've read so many posts about this nice little plug-in, and found a couple that seem to have the exact same issues as me but no solutions/aswers has been posted. I'm hoping someone in here can shed some light onto my ignorant mind.
I have an HTC branded TyTN (Model name HERM200). I have flashed it with the official HTC Swedish WM6 upgrade ROM. Now I've found this nice HTC HomePlugin that I wanted to use. I've tried many different versions but I have the same problems with all of them.
I install HTC HomePlug 2.1, soft-reset. The plug-in loads up nicely. But these things doesn't work:
1. I cant seem to connect any contacts to the speed-dial buttons.
2. I cant seem to connect anything to the launcher-buttons (It just displays a folder icon when I click an empty button.)
3. Weather tab doesnt show anything. (I can live without it though)
4. Musicplayer seems to stop music after a second. I press play, it plays for a second, then stops.)
Please, does anyone have any ideas on why it won't work?
Click to expand...
Click to collapse
Try this [size=+2]cab[/size],
1. install,
2, wait for 10 seconds,
3. go to to day setting, uncheck the Home plug-in,
4. ok,
5. go to today setting again,
6. re-tick the home,
7. ok, ok, then you will see the 5 tap home.
8. want all 6 taps?
9. go to today setting, home tap, tick the music tap,
10. ok, ok then wait some seconds.
11. DONE ! ^_^
dioxda2 said:
Try this [size=+2]cab[/size],
1. install,
2, wait for 10 seconds,
3. go to to day setting, uncheck the Home plug-in,
4. ok,
5. go to today setting again,
6. re-tick the home,
7. ok, ok, then you will see the 5 tap home.
8. want all 6 taps?
9. go to today setting, home tap, tick the music tap,
10. ok, ok then wait some seconds.
11. DONE ! ^_^
Click to expand...
Click to collapse
This did not work. If I check any tab other than Home, the plug-in doesn't show anything at all. Thanks anyway...
Just to follow up. I finally got it working. What did it was that I installed HTC Home Customizer and in the settings in there on the Options tab I selected Plug In Language Swedish and now everything works like a charm!!
hi
I need your help desperately.
I flashed Stu's vista rom and then I installed Emu's Htc home .cab (version 2.1)
After that my phone loads the startup screens and it seems to freeze in the windows screen. I can see the soft keys, the start button....but when I click on that nothing happens.
I try to connect it with my pc but there isn't any partnership established. Also I did many soft resets and pulled out the battery.
Can you help me please?
spinyian said:
I need your help desperately.
I flashed Stu's vista rom and then I installed Emu's Htc home .cab (version 2.1)
After that my phone loads the startup screens and it seems to freeze in the windows screen. I can see the soft keys, the start button....but when I click on that nothing happens.
I try to connect it with my pc but there isn't any partnership established. Also I did many soft resets and pulled out the battery.
Can you help me please?
Click to expand...
Click to collapse
I'm not really an expert spinyian, but have you tried installing the certs?
Search these forums for SdkCerts.cab and Cert_SPCS.cab. As I understand it these allow some unsigned applications to run properly and may be required by some ROMS and devices.
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
It's great to find a way to install or restore the Windows on M88. My one just died. I haven't access to anything but the "phone" functions, so i need to restore it somehow from my PC. Some advices?
snakemountain said:
I recently purchased two M88 Miphones from China (Windows Mobile 6.0 version). Both were supposed to be in English but when they were shipped to me, one was in English and the other Spanish. How can I change the language from Spanish to English? Or maybe I can install an entirely new English version of Windows Mobile 6.0? Can I extract the ROM from the English one and use it for the other (Spanish) one? Please help. Thanks.
Click to expand...
Click to collapse
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
teddy_irish said:
Hi, I think there is a way to change your Windows to English. I received the same phone with the same problem. I wrote to the supplier and they respond with the decision: they provided the original english WM6 ROM for M88 MiPhone on the website, so you can download it from here: http://rapidshare.com/files/168534489/DX.SKU16783.UPDATE.ENGLISH.AUG01.rar
But my problem is that I can't go in to the bootloader mode - just don't know how so to start loading the Windows OS. The instructions on the site are very poor and don't work. So I'm stuck again. Here there are the instructions:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
And some more instructions from my correspondence with the supplier, which shows different way of putting the phone in to the bootloader mode:
"we have a better idea to solve this inconvenience for you
we had updated a file on our website for you
you can download it and put it in your memory card to update the language into English.
you can put the file in the memory card no need to creat a folder for it
and insert the card into your cellphone
press the power bottom and the home bottom together
a few second later there would be a message on the screen shows you can press the home bottom again to restart the cellphone"
So maybe you can see they are showing different ways to enter the boot loader. Neidher 2 of them are working for me.
Since I have this phone I didn't find a way to enter the bootloader mode! I tried every combination between the keys but NOTHING! The only thing what I can do with the buttons is SWITCH OFF, SOFT RESET AND HARD RESET.
Please if somebody discover how to do that on that phone -M88 to share here with the rest of us!
Best of luck!
Click to expand...
Click to collapse
Hi, I'm From Brazil
I'm selling this phone here in my country.
I think I've got same problem here. But I've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
But be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today I have one M88 "dead" in my hands because I did not followed all this procedure and after 35 minutes, by mystake I pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But I think using one of those "BOX" devices I will ressucitate it!
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
teddy_irish said:
Thanks m8!
The thing is that when I press the 2 buttons at once I can only get blue screen for less than 1 second and after that Windows is loading. When it is done - the phone is after hard reset. I've tried hundreds of times - always the same. I can't get messages asking me to load software - only hard reset is the result. I've tried any other combination, including the reset buton under the cover, next to USB, but never managed to enter the service mode or boot mode or whatever it is.
One week I'm wasting my time in doing hundreds of attemts to enter the bootloader and nothing! How then do you make a hard reset on the M88?
Do you thing if I can use backup from english version of the same model that will change the situation - the spanish will be substituted by english? And if it's possible can you upload such a backup, made by Spb backup software for me, please?
Best regards
Click to expand...
Click to collapse
I think I can do that,
but in one and half week because I'm still waiting for the flashing box and their cables.
Once I get I will upload it here.
ZEMONTI said:
I have stupid problem. Some files disappeared, some programs stopped working and the entire system blocked. I made many soft and hard resets, which fixed the things... for a while. After one hour it's blocking again, without any settings, or interventions.
I downloaded the ROM, created a "root" folder in the card and unzipped everything there.
The thing is that it ROM-boot looks too fast - only couple of minutes. Can it be?
Click to expand...
Click to collapse
Go ahead
But be pretty calm when performing update or you gonna get a bricked phone.
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
It is possible the update to take only few minutes
ZEMONTI said:
But is it possible that the update takes only few minutes? Or i'm doing only hard reset?
Click to expand...
Click to collapse
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
That's good news!
Yes It is!
How to install WM6 ROM - English version on M88 MiPhone from SD card
Please download the original ROM from here
I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart.
After the restart it will load the English OS on your M88
Enjoy
the mine is dead too.
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
i am passing through the same. What do you mean with box. I need to ressuciatate it
please.
[email protected]/ [email protected]
helllp
stenatay said:
hi, i'm from brazil
i'm selling this phone here in my country.
I think i've got same problem here. But i've tried to get bootscren and it seems to be that procedure correct.
Once you shutdown the phone first remove it battery for 10 seconds, and than put back into the phone. Than press power and home(that center buttom) until phone show 2 messages(one for master boot and other for clear boot).
After this message you may release power buttom and keep pressing home buttom untill phone shows it boot screen.
You will face a "downloading program, please wait" message on phone screem
but be extremelly carefull than, make sure you have a power cable attached to the phone and it battery at least 90% charged because update took lot of time sometimes.
I'm telling that because today i have one m88 "dead" in my hands because i did not followed all this procedure and after 35 minutes, by mystake i pressed reset buttom.
Now my phone not even turns on, nor charge it battery, is dead.
But i think using one of those "box" devices i will ressucitate it!
Click to expand...
Click to collapse
help me, the mine is dead.
how per-say?
teddy_irish said:
Hi from Ireland!
Yes it's possible. Today I finally managed to make the update - it took only 3 minutes. Now I have English OS on my M88!
It's a really nice phone isn't it?
Regards
Click to expand...
Click to collapse
how persay did u get past the blue screen?
hello I am of chili and my m88 non reconose the card of cellular neither the icon of the cellular one needs urgent operative elsistema and the program and naturally like one makes before hand thank you
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
jaguerra said:
Hello every one,
I have this phone too, I trying to find any way or a cab to send the audio from the Fm radio app to the bluetooth headset, but no progrees, it only works with the original eraphones,
Any one have an a idea woh to do it?,
Regsards.
Javier.
Click to expand...
Click to collapse
Me too. I was intending to lessen some audio-books.
Does it requires some additional software?
so how did it go and whats the name of the box i need one kinda kill my phone as well
please give info if u have it
M88 english bootloader
Here is the fix, sponsored by wirelessandmorestore.com
Copy both of these files to your computer.
http://uploading.com/files/YE6JJ36Y/update.img.html
http://uploading.com/files/TA1N0MBA/uploader.img.html
Plug in your phone and copy them to the SD card.
Turn the phone off.
Press the button on the top and the round button on the face at the same time and continue to hold it. As you are holding it, the phone will turn and go thorugh a couple steps before it says something like 'downloading image' or 'updating image' something like that.
Once it gets to that screen, you can let go of the buttons and the phone will update and reboot. This will take a couple of minutes. It will be in English when it turns itself back on and loads Windows.
English OS System 20080801 Edition (ROM image) for M88 MiPhone
Please download from here
If somebody knows how to enter the bootloader mode of this phone please share here with us!
Here is the instruction for this procedure from the supplier which is nor working for me:
"English OS System 20080801 Edition (ROM image) available for download
- To update ROM, format your TF card with FAT32 and unzip all files and folders from the downloaded file into the root folder of the TF card. Then, restart the phone to begin updating. This update converts all non-English versions of this phone into English version."
If somebody can manage to install the ROM please write here the steps!
Thanks!
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Problem Fixed!
GnatGoSplat said:
You can get to the flash update by pressing RESET, MENU, and POWER all at the same time, then release RESET first and wait for a message. The message will tell you to release POWER to do a hard-reset or MENU to do a flash update. In this case, you will release MENU first, then you will get a message asking if you want to update from SD. At this point, none of the buttons do anything so I assume you have to tap the touchscreen. My touchscreen is broken so I couldn't get any further than this.
Click to expand...
Click to collapse
Thanks for your help, m8. It didn't work that way for me. I was adwised to do this:
1. Duplicate the update.img file and rename the second one as "uploader"
2. Copy both "update.img" and "uploader" on the SD - formatted in FAT32
3. Press POWER and HOME butons at the same time.
4. There are two possible options from here:
a) White screen with blue text showing "Upload image... please wait..."
b) Red screen with the options what to do in the next step -
5. I saw first the a) option - the white screen. So after 3 minutes of waiting the phone said it is done and it will selfrestart. After the restart - voila! There was the English OS loaded on my phone and everything was working perfect!
Hope this to help to other people too!
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Check this out:
ZEMONTI said:
Wow! It was very detailed and finally i resolved my problem. Thanks!
Does somebody knows how can i uninstall the fung S2U2? It causes a lot of problems with the horizontal screen ant others. It's not in the list of "remove programs".
Click to expand...
Click to collapse
Check this out:
Resco explorer
Pocket Mechanic
Pocket Toolman
Resco is very useful thing so the other two are very powerful as well. You will definetely uninstall S2U2 with more than one of them.
Good luck!
Hi, is it existing a French release of this rom for M88 or can you help me for translate it ? Cordialy
Sorry for my english very bad...
MMS works in this rom?
MMS works only with Arcsoft_MMS_Composer_v5.0.31.16
bye
Mark
i have aquestion... : I was screwing around with the m88 phone and put in the original rom in (I've done this many times) but this time i forgot to use the other three files .img and ... i only had the update.img in the card... then when i tried flahing it , it was reading but the battery fell out and now it wont turn on.... any ideas on how i can fix this... ???? I really need the help please!!! If it is possible to fix this.
helppp
I need help i was updating mi os , but it takes more than a half of hour , and now it wont turn on again how can i fix that? thanks?!
problems
i have a daxian +999
i flash it whit that file it work but now i have a white screen the phone looks like ok but nothing shows in the screen only a white screen what i can do ??
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
problems in m89
hello, I recently bought a M89.
In general the phone is great, but mine has a very big problem.
As a PDA it works great, but when I insert my SIM card the phone just freezes. It works for just a minute after the SIM is inserted. I've even been able to make one or two calls before it freezes.
But past one or two minutes it just stops working. It doesn't respond to anything at all, the only solution is to remove the battery.
I think the problem is in the firmware. I've reinstalled a bunch of diferent firmwares: wm6 english, wm6.1 spanish, wm6 english again... and nothing works.
can anyone help me???, 'cause this is really killing me :'(
Thanks in advance!
oic0 said:
My touchscreen does work but I get the white screen asking me "updated from SD card?" then it just sits there. I dont have a keyboard to hit Y. None of the buttons do anything. Touching the screen does nothing.
*edit* figured it out. You just keep holding the power button down. Then it flashed to a solid purple screen. I went wtf.... it screwed up again? then after a few minutes it booted up.
Click to expand...
Click to collapse
Just wondering - What is the size of your microSD card.
As far as I know m88 does not support SD card greater that 4 Gb by default.
Please, let us know.
Updated from SD Card ?
Hello, first of all I want to say thank you because I learned a lot from this thread. I bought M88 phone some months ago and is the first time I cannot use ( I really don't know what went wrong but finally the phone is not working or frezze ).
I bought 2Gb card and was formatted in FAT32. I also complete all steps in order to load the original image but I got this message: "updated from SD card?" and nothing more... What button must be pressed ?
I'll go crazy... do you know what's the next step ?
Thank you very much.
i dont understand sorry. i have to copy the "update" imgfile and rename it as "uploader"... and leave this two files : "update and uploader" in the root folder ?
I've install ROM from this topic: http://forum.xda-developers.com/showthread.php?t=452848
and now, when I try power on my MiPhone - it show only white screen - please help!
bootloading
the file, atleast on windows 7, shows up as "update". Also, I found it works must faster and easier to make 3 copies (4 files total)
naming 1: update.img
2: uploader.img
3: Update
and 4: uploader
(so the last 2 don't actual have .img in the title)
Then just make sure you hold down both the buttons, and vuo-la! haha
Doesn't fix the MMS problem though.
Does anyone know how to make it so that it can use mms?
Miphon m88
Danke es funktioniert supper !!
i got white screen too ;[ how to fix my phone now ;/ i dont see enythink ;[
I wasn't expecting to do this, but I had a 2 hour delay at my college due to snowy weather, so I decided to take the time to upload my 1st official WM6.5 rom for the Asus A6x6 early. Keep in mind that this rom is far from perfect and the fancy new WM6.5 today screen is not working (looks like the today screen from WM6/6.1).
Thanks to Makuu (for helping to get me started), Lenny, AstainHellbring (thank you for all the nightly help sessions), the creators of the tools I used to make this rom, and anyone else that I failed to mention in name who gave me the knowledge to complete this rom.
Asus Mypal A6x6 WM6.5 version 1a
Windows CE version 5.2.21234 (Build 21234.5.0.1)
This was tested on an Asus Mypal A626 (and works). It should work with the A686/A696, but the other models were not tested. Any other models not metioned above WILL NOT WORK.
Updates
1. os build
2. bug fixes
Additions
1. Windows Marketplace
2. File Dialogue Changer
3. PsShutXP
Removals (you can reinstall these via windows marketplace)
1. Windows Live
2. MS Office Mobile (get the beta from marketplace)
Removals (non-Windows Marketplace)
1. Remote Desktop Mobile
download: http://www.easy-share.com/1909744620/Asus_A6x6_WM65_1a.rar
At this time, this will be the only download link. Mirrors will be created in the future (after I give permission).
Instructions (I have included a txt file with same instructions for offline convenience)
Before you do anything, make sure you have at least a 256mb SD card and a card reader (you can get one at a place like Radio Shack or Office Depot). You also need to install winrar (found at http://www.win-rar.com/download.html). Your SD card must be formatted with the FAT16 file system.
To format your SD Card with the FAT16 file system
Step 1: To do this insert the SD Card into the reader and go to "My Computer".
Step 1a: BACKUP YOUR FILES before you start!!
Step 2: Right-click the drive letter of the SD Card reader (differs for each computer, probably either E:\ or F:\ or G:\) and click "Format".
Step 2a: Don't worry about any of the options except for file system, choose "FAT"
Step 3: Click "Start" and wait until it is done
Step 1: Get (OS) rom image
Step 2: Extract files to any folder on hard drive using Winrar
Step 3: Go to the folder where you extracted the files in the RAR archive
Step 4: Make sure that the filename is "CANNES_A_WM6.img"
Step 4a: if the img file it's not exactly "CANNES_A_WM6.img", rename it to that
Step 5: Format the SD card if you haven't already done so using the instructions above
Step 6: Copy the img file to the SD card, see step 6a
Step 6a: Make sure that the img file is the ONLY file on the SD card after formatting
Step 7: Take SD Card out of SD Card reader and put it in the a6x6
Step 8: Make sure that the a6x6 is plugged in via ac adapter before doing the next few steps
Step 9: activate SD Loader using the following instructions {
Step 9a: Hold down the power button and enter button (that's the button in the center of the d-pad)
Step 9b: Double tap the soft reset button while holding the other 2 buttons
Step 9c: After double tapping the soft reset button, keep the other 2 buttons held until a blue screen comes up that says something like Asus Cannes flashing utility
Step 9d: Wait until the process is finished (it's near the end when it says "writing private")
}
Step 10: At this point, your a6x6 should reboot on its own
Step 11: enjoy your updated rom
If you have any questions, feel free to just post or PM me.
As I release new roms, if you have a support question, please give me the rom version so I know what rom you are working with. You can get the rom version from the filename of the rom pack.
Example: Asus_A626_WM614_1
A626 = device (most often it will be A626, will rarely be different), WM614 = os version, 1 = release #
Update: Ok, I put out a bug fix rom with a fix for the today screen. I am still trying to find a fix for the sound and notifications control panel applet. The old rom (version 1) is deprecated and is not available for download any more. Use version 1a instead.
ASUS A696 User
Hi, Thanks for the release and good work. Since this is only the beginning (I hope), I begin to inform the performance firmware on my PDA (ASUS A696).
1 - Bluetooth - does not work (does not receive or send files)
- In the settings instead of the icon is a black square.
2 - Today - of all the elements shown only date and time, and only in the old form (as in the previous OS). I wish that Today was like other communicators.
3 - Start - which happened to all the sounds from the "Sounds and Notifications"?
4 - Software & others - as the 696 series have more memory, you can not throw out the program and plug-ins.
Waiting for a new version
Sorry for my English? i'm from Ukraine).
Skromnjaga said:
Hi, Thanks for the release and good work. Since this is only the beginning (I hope), I begin to inform the performance firmware on my PDA (ASUS A696).
1 - Bluetooth - does not work (does not receive or send files)
- In the settings instead of the icon is a black square.
2 - Today - of all the elements shown only date and time, and only in the old form (as in the previous OS). I wish that Today was like other communicators.
3 - Start - which happened to all the sounds from the "Sounds and Notifications"?
4 - Software & others - as the 696 series have more memory, you can not throw out the program and plug-ins.
Waiting for a new version
Sorry for my English? i'm from Ukraine).
Click to expand...
Click to collapse
A few comments on your post:
1. I will check on the bluetooth situation. When I tested bluetooth, I didn't quite test file exchange enough.
2. I am working on a remedy/fix for the today screeen. However, I have no idea how long it will take for me to get it working.
3. This is just a matter of updating a few files. I used an older (and verifiably working) package to give non-phone support.
4. I am aware that the A696 and the later version of the A626 carry more flash rom space than the older version of the A626 and the A686. However, no matter what device I make roms for, there is a finite amount of space to fit everything into. As operating systems and programs progress, they get bigger and bigger. If everything keeps growing in file size, there is less space to fit more items, so I must remove some files/programs to keep within that finite limit of storage space. Where do all the files that I put into the rom go? Well, if you take a look at your storage memory, you will see that the total storage memory available is less than the standard 256 rom size.
I've downloaded and successfully flashed. Working good so far. I'm just installing some programs that I normally use and haven't run into an issue yet. It will be nice to have a working home screen but for now it isn't that big of a deal. I don't use bluetooth often so I can't comment on that yet. Wifi working, my music plays with S2P, I used windows market place to install netflix and office.
Keep up the good work!
Good job, but there are many failures to complete.
1) Today
2) Pictograms from former versions
3) "Sounds and Notifications"
4) Black pictogram Bluetooth in menu
5) When I close program - PDA show me Today(but must show menu)
6) Where is Oficce?
7) The pictograms not move in Start menu(only "Move to top")
Can you change your previous OS(WM6.1 rom version 2) context menu, pop-up menu and other for new from this OS?
P.S.: Sorry if you don't understand me I used translator...
Do you have french rom...?
Thank you.
just tested this build together with your WM6.1 release.
first impression - looks nice
even though seems slower on A696 - but this could be just because it's not tailored fully.
1) didn't test bluetooth much but seems to work fine with sending/recieving. I'd even say it's faster than on WM6.1 v2 release;
2) "Sounds and Notifications" problem with Events from previous v2 WM6.1 build;
3) under "System - Bluetooth" sometimes on BT icon there's black square - didn't notice when it happens though;
4) closing program throws you into Today screen insted of previous step;
5) same problem with Task Manager as I've said in previous thread for WM6.1
good luck
Hello, Steven!
I'm very thankfull to you for WM 6.5.
I have trouble, while installing, to say correctly, on the beginning of installing on my a626. I did everything as in instructions, even for few times. When i press power and enter button, make double tip on the soft reset, I see blue screen, where said sth about Cannes and its version.
it write my FAT type(FAT16), i see very little blink of "Reading file", if not take off fingers from power and enter button, it resets to blue screen again, if take fingers off the buttons, PDA loads...I just don't know what to do.. please, help me!
ps: sorry for my english.
I think I've found an issue. This morning when I turned on the device I had a missed appointment, the notification dialog at the bottom of the screen showed up but it was blank and had the wrong time on it. Not sure if this is a 6.5 issue or an Outlook 2010 issue.
bmasephol said:
I think I've found an issue. This morning when I turned on the device I had a missed appointment, the notification dialog at the bottom of the screen showed up but it was blank and had the wrong time on it. Not sure if this is a 6.5 issue or an Outlook 2010 issue.
Click to expand...
Click to collapse
Oh dear..I will be sure to check on that. As far as Outlook, do you mean Outlook on desktop Windows or Pocket Outlook on Windows Mobile? The only thing is that office (outlook) 2010 is still in beta and hasn't been released officially to the general public yet, so I can't find any definite fixes. I still believe you, but the fact remains that Outlook 2010 is still in beta and the code for the finished product could always change.
Steven, why have you ignored my message?
Hello, Steven!
I'm very thankfull to you for WM 6.5.
I have trouble, while installing, to say correctly, on the beginning of installing on my a626. I did everything as in instructions, even for few times. When i press power and enter button, make double tip on the soft reset, I see blue screen, where said sth about Cannes and its version.
it write my FAT type(FAT16), i see very little blink of "Reading file", if not take off fingers from power and enter button, it resets to blue screen again, if take fingers off the buttons, PDA loads...I just don't know what to do.. please, help me!
ps: sorry for my english.
Click to expand...
Click to collapse
I had the same issue. With a slightly modified .img ("replace:0xC 09 04 => 36 D6" by _barmaley; because I'm a new user I couldn't link the original post...) the update completed successfully.
PS: Steven thank you for the ROM!
Steven855 said:
Oh dear..I will be sure to check on that. As far as Outlook, do you mean Outlook on desktop Windows or Pocket Outlook on Windows Mobile? The only thing is that office (outlook) 2010 is still in beta and hasn't been released officially to the general public yet, so I can't find any definite fixes. I still believe you, but the fact remains that Outlook 2010 is still in beta and the code for the finished product could always change.
Click to expand...
Click to collapse
I am using Pocket Outlook, the new 2010 beta. But it doesn't seem to be related to that, if I make a Notification Dialog popup from something like turning off the A626 it gives me a blank white box. Now I've soft reset the device and it seems to have gone away. I'll keep trying to figure out how to recreate it.
First of all, thank you Steven855 for your job
Skromnjaga said:
1 - Bluetooth - does not work (does not receive or send files)
Click to expand...
Click to collapse
i have no problems with a bluetooth (i can send and get files from my nokia e60)
Skromnjaga said:
2 - Today - of all the elements shown only date and time, and only in the old form (as in the previous OS). I wish that Today was like other communicators.
Click to expand...
Click to collapse
Try to change values in System Registry:
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live\Enabled (from 1 to 0)
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live Search\Enabled (from 1 to 0)
make a soft reset, check(ON) your plugin in today's settings, make a soft reset
now i have a problem with a today's size (you can see a scrollbar at the right side of the today's area) but its a better as nothing
_barmaley said:
First of all, thank you Steven855 for your job
i have no problems with a bluetooth (i can send and get files from my nokia e60)
Try to change values in System Registry:
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live\Enabled (from 1 to 0)
HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\Windows Live Search\Enabled (from 1 to 0)
make a soft reset, check(ON) your plugin in today's settings, make a soft reset
now i have a problem with a today's size (you can see a scrollbar at the right side of the today's area) but its a better as nothing
Click to expand...
Click to collapse
Are you telling me this is how to fix the today screen issue? If it is (I still have to test it), I commend you for finding a fix that actually works.
Steven855 said:
Are you telling me this is how to fix the today screen issue? If it is (I still have to test it), I commend you for finding a fix that actually works.
Click to expand...
Click to collapse
yes, this is a tricks to fix the today screen...
i've tested it on my ASUS mypal a696 (but due to the fact that wm6.5 is not stable, I was forced to return to the WM6)
Is this all? Is there a step you're not telling me (I can't seem to replicate it)? What registry editor did you use? Did you use the (soft) reset button or did you use a program to soft reset the device?
Steven855 said:
Is this all? Is there a step you're not telling me (I can't seem to replicate it)? What registry editor did you use? Did you use the (soft) reset button or did you use a program to soft reset the device?
Click to expand...
Click to collapse
I edited the registry, because I was not able to check (ON/OFF) plugins in today's settings
i use resco explorer & reset button.
!!!!!!!!!Try to set ENABLE to 1 for your Plugin (HKLM\SOFTWARE\MICROSOFT\TODAY\ITEMS\"YOUR TODAY'S PLUGIN"\Enabled (from 0 to 1)!!!!!!!!!!!
what program can record video from screen PDA, I could write all steps
ASUS 696 owners please check and confirm the efficiency of the method.
what's the soft reset button on the asus a626? Not quite sure, the device reboots into OS D:
EDIT:NVM I got it, for ASUS A626 DEVICES, POWER OFF YOUR PHONE BUT DO NOT PRESS THE REBOOT KEYS. ONLY PRESS THE MIDDLE D-PAD BUTTON AND YOUR POWER BUTTON