Develop Bugs

Artemis & Jabra bt620s problems

Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!

BigND said:
Hi, I really need some help to solve theese:
After connecting Jabra bt620s (bluetooth stereo headset) to Artemis there are only two profiles under this device: Handsfree and Wireless stereo (i guess the last means A2DP). I can place and receive calls and listen to music in stereo, even turn volume up and down.
1. But other buttons on headset don't work No play/pause, prev/next and rewinding. So what do I need to make them work? Are there any bt stack patches for Artemis like for Prophet, or maybe some special software? AFAIK there has to be special bt profile support to make the trick.
2. How to redirect all sounds to bt headset in stereo? I REALLY want to listen to fm-radio through Jabra 620. But even when bt headset is connected to Artemis radio goes to either connected wired headset or built in speaker Is there any solution?
Thanks in advance!
Click to expand...
Click to collapse
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.

leon100 said:
Re:
1. In order for the controls to work, the device should support the AVRCP bluetooth profile. Not sure though whether the Artemis supports that profile, and in any case this would not mean there would not be other issues.
2. Do you mean that the no sound is received by the Jabra, or that it is being received in mono? If the latter there is a registry change to a 'JointStereo' setting that should do the trick.
Click to expand...
Click to collapse
1. I guess that AVRCP bt profile is NOT supported on Artemis by default. The question is what can be done to somehow add this profile to Artemis. Applying some patches or something...
2. I mean that no sound is received by the Jabra. Sound goes to either wired headset or built in speaker.

AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae. Even so, I doubt sound will come to your BT headset. It just acts that way.
CHeers.

MasK said:
AVRCP IS supported by the Artemis.
Click to expand...
Click to collapse
Indeed it is. It was Mort player's problem. Last release version doesn't support control buttons, but final available beta does!
MasK said:
All my sounds are transfered automatically to my BT headset.. system sounds and my GPS program (MapKing) sounds.
Click to expand...
Click to collapse
Is is not ALL sounds, because radio sounds are not going in!
MasK said:
Radio CAN NOT be run unless you have a wired headset inserted, as it acts as an antennae.
Click to expand...
Click to collapse
Sure thing I do plug the wired headset in. But sound goes to either built in speaker, or wired headset.
MasK said:
Even so, I doubt sound will come to your BT headset. It just acts that way.
Click to expand...
Click to collapse
I REALLY hope that there IS the way at least to redirect radio output to bt headset instead of built in speaker. Maybe registry tweak or some special software.
So research on this topic continues!

You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/

MasK said:
AVRCP IS supported by the Artemis.
You need to make sure the player that you use supports as well. I have tried WMP and PocketMusic, and they both support it. Works great with my Jabra320s.
Click to expand...
Click to collapse
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?

MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
Well, I gave it a try, but didn't download Microsoft .NET Framework 2.0 yet. On fist try it doesn't do the trick Maybe because of lack of that MS thing. I'll get and try it later.
Thanks for helping anyways!

zen123 said:
Mask...I'm using same Jabra 320s as you. I am having a problem however. the music is skipping kind of like a scratched cd. Also the music intermintently speeds up and slows downs. Do you have this problem? Any ideas how to solve this?
Click to expand...
Click to collapse
Whoa.. the speeding up and slowing down is little.. but noticeable. I didn't know anyone else would notice it.. hehe
Yes.. I do have that.. it happens especially after the pause.
I set my BitPool value to "45".. which has very little noise, but hardly skips. The thing is, I feel that if I make sudden moves or go further than 2 metres without a straight line of sight, the music will get cut off
Higher bitPool value will increase quality, and pauses.
How about you? What is your bitPool value?

Set to 45 aswell also do notice a high freqency wail in the background.

zen123 said:
Set to 45 aswell also do notice a high freqency wail in the background.
Click to expand...
Click to collapse
Yes it does.. but I'm outdoors and commuting most of the time when using the headset, and thus that level doesnt bother me much. It's a balance I would say.. But could be better..
If you do find a good tweak to increase the bitPool without skipping, do lemme know

MasK said:
You might wanna try the following:
http://www.simplesmartphone.com/BlueCast/
Click to expand...
Click to collapse
I was looking for a way to do this, and this worked first time - thanks
I'm just using a mono headset - but it's fine

Route BT Audio with WM6 XDA Live?

I have tried about 4 different programs that used to work with WM5, but nothing routes the audio properly. Is this a known issue? I read through most of the WM6 threads and saw a lot about VC 1.6, but nothing about this specifically. I like to route mono sound to my bluetooth to listen to music while i work, but now, I load up any bluetooth routing program and my headset beeps like it used to, but the sound still plays out of the speakers. Any help?

Have you tried using Bluemusic http://www.teksoftco.com/index.php?section=bluemusic.
I installed the demo, removed the today plugin and now when I press the button on my bluetooth headset (Jabra JX10) all audio and mic is routed to the headset until I press the button again. I've used it on Skype, and for listening to music.

the only thing you need is to install the widcomm/broadcom bluetooth stack and it will work like a charm!!
and, the soundquality will be MUCH better!

cybertron said:
the only thing you need is to install the widcomm/broadcom bluetooth stack and it will work like a charm!!
and, the soundquality will be MUCH better!
Click to expand...
Click to collapse
can you quick link me for this? If I can't get this fixed i'm contemplating going back to WM5 until more bugs get ironed out cuz this is a biggy for me.
And YES i've searched for this...but if its that easy to find by search obviously i'm missing something...please help!

DeniaL said:
And YES i've searched for this...but if its that easy to find by search obviously i'm missing something...please help!
Click to expand...
Click to collapse
Rrrrrrright ...
HKLM\Software\OEM\VoiceCommand "LaunchApEnable",0
HKLM\Software\OEM\VoiceCommand "VoiceCmdDuration",86400
VJVolubilis.exe -agon
Worx like a charm for me.
Of course to the extent of how crappy s/w running on a crappy h/w can :-(

can someone explain to me on this issue how it works that on certain devices i guess that are designed for hands-free talking only route audio from a phone call rather than all audio as with for example bluetooth speakers one can find. i'm in the market for some bluetooth speakers for my car and i'm wondering how some of these speaker phone devices may work but i gotta understand how these things work first. thanks. feel free to get technical with me. use high-tech achronyms and such. i wanna learn.

http://en.wikipedia.org/wiki/Bluetooth_profile
main ones u need to look at are a2dp and hsp

thanks a lot.

I know you're supposed to make this change in a RegEdit program, but what is this VJVolubilis.exe -agon part about. Is that a program we're supposed to download?

How to transfer system sound to headset

Hi,
using the search and ending up with no answer to my question I thought it legal to open a new thread.
Now I want to transfer all the system sounds to my BT-headset.
Reason why simple:
I use my BT-headset most of the time and I want to hear the sound of my navigation software (NM6) through my BT-headset.
So what have I to do?
Thx,
Chris

I'm new to Universals... on Wizard and Hermes, the answer would be BTaudio.

firstcw said:
Hi,
using the search and ending up with no answer to my question I thought it legal to open a new thread.
Now I want to transfer all the system sounds to my BT-headset.
Reason why simple:
I use my BT-headset most of the time and I want to hear the sound of my navigation software (NM6) through my BT-headset.
So what have I to do?
Thx,
Chris
Click to expand...
Click to collapse
I used to use this, it worked great on WM5. I used to use this for TT6 through my BT head set.
BT Voice Command:
This stops the WM5 Voice command s/ware launching when you press the button on the bt headset.
Instead, the button now will open an audio channel to the head set.
This will work with TomTom so I can hear the directions.
All the best
Mav

awesome!
great cabs dude. everyone should have this. WORKS great on WM6 (jcpwright build), HTC WMP Today Plug-in, BT500 headset. Streaming music. Smaller than Broadcomm Stack, and works good. Will test some more to see if incoming-calls, outgoing-calls working normally. Fantastic !

Thread for Bluetooth Problems with Black 3.0.1

I did a search on the other thread and found many people with the same issue. In order to organize our thoughts on this topic I would go ahead and open a thread for it and maybe this will help jj and community members to find a solution.
My problem is much like everyone else. I can connect my motorola S9 they will play music; however, when I go to try to make a phone call or answer a call all I get is a slight hum through the headset with no audio and a possible freeze of the device. The slight hum is initiated by pressing the phone icon button on the headset.
I hope I haven't pissed people off by starting this thread I just thought it was necessary to come together on this because it is not just noobs having this problem but members and senior members.
EDIT: It looks like from the other thread JJ just came on and addressed this issue and is working on a fix. mods please remove this thread.

donsaxena said:
I did a search on the other thread and found many people with the same issue. In order to organize our thoughts on this topic I would go ahead and open a thread for it and maybe this will help jj and community members to find a solution.
My problem is much like everyone else. I can connect my motorola S9 they will play music; however, when I go to try to make a phone call or answer a call all I get is a slight hum through the headset with no audio and a possible freeze of the device. The slight hum is initiated by pressing the phone icon button on the headset.
I hope I haven't pissed people off by starting this thread I just thought it was necessary to come together on this because it is not just noobs having this problem but members and senior members.
EDIT: It looks like from the other thread JJ just came on and addressed this issue and is working on a fix. mods please remove this thread.
Click to expand...
Click to collapse
yes... still investigating this issue... the drivers i used have A2DP issues...

Widcomm bt project?
My problem:
Parrot ck3100 paired and sincro without problem. But no sound, just static.
Nothing original, as I can read in meny posts.
I wonder if somebody tried widcomm bt drivers (the project for hermes) with black 3.0.1.

I've been seeing a weird issue where the phone doesn't seem to know if BT is on or off. The Comm Manager will say BT is off -- but the blue LED is blinking. You go into BT settings, and it's unchecked (and presumably off) -- but it's still discoverable from PC's. Also hitting the BT button on the comm manager doesn't always toggle BT -- sometimes it works, sometimes not.
It's not a major deal to me, since I only use BT for PAN and file transfers, but that's only because I lost my really nice BT headset.

I have the Motorola HT820.
Black 2.0, not working
LVSW 5/5 working but phone only sometime answers
Black 3.01 - Success! All buttons work and sound is fantastic with stereo. Headset seems to work for call.
Widcom stack on my lappy seems to connect ok, although it seems slower than previous roms for transferring files

I'm currently testing an uncooked version of this ROM and BT is working without any problems

Am using a Jabra BT 250 headset. Initially paired it fine but went to use it an hour later and would not connect.
Re-paired it and it worked but with static.

sag said:
My problem:
Parrot ck3100 paired and sincro without problem. But no sound, just static.
Nothing original, as I can read in meny posts.
Click to expand...
Click to collapse
Mute and Unmute by pressing the Green button twice should bring back the sound.

donsaxena said:
when I go to try to make a phone call or answer a call all I get is a slight hum through the headset with no audio and a possible freeze of the device. The slight hum is initiated by pressing the phone icon button on the headset.
Click to expand...
Click to collapse
Having the same problem on 3.0.1 flashed back to 2.5 untill the fix.
awesome speed of Black 3 looking forward to the fix

Parrot
has anyone got a way to fix that problem with the ck3100 ? i have found i can connect and dial out but my handsfree dosent give out any sound, when i try to hang up on the handsfree it wont. can anyone help me?
sag said:
My problem:
Parrot ck3100 paired and sincro without problem. But no sound, just static.
Nothing original, as I can read in meny posts.
I wonder if somebody tried widcomm bt drivers (the project for hermes) with black 3.0.1.
Click to expand...
Click to collapse

whats wrong with posting this in the thread for black 3.1? i guess this issue will never be solved not the bluetooth the stupidity

If the BT issues are a problem, do as I and many others did; flash Black 2.5 back onto the phone. Hopefully, your backup will be better than mine
But, the reality is that these are ROMs that are put together by volunteers, and use the latest available software. It can, by its very nature, contain bugs. It is NOT JJ's issue to fix them all--he's done a great job (walshieau too!) making these kick-ass roms. If you want to complain about the roms, flash the official carrier rom, and call them and complain. If you want to be on the bleeding edge, you are going to have to READ, LEARN and UNDERSTAND what you are doing--and be proficient enough to at least TRY to fix your own problems.

Sony Ericsson MW600

Has anybody tried and got the Sony Ericsson MW600 to work? I can listen to music and it is seen as a music headset but no calls? it will not connect as a hands-free phone-kit?
I tried to shuffle through all the blue-tooth and connections settings but I can not find any solution?
Any help is very appreciated.
Robert

Robert_it said:
Has anybody tried and got the Sony Ericsson MW600 to work? I can listen to music and it is seen as a music headset but no calls? it will not connect as a hands-free phone-kit?
I tried to shuffle through all the blue-tooth and connections settings but I can not find any solution?
Any help is very appreciated.
Robert
Click to expand...
Click to collapse
Hello Robert_it.
I've bought it today before seeing your post.
It works as bluettoth headset with calls.As i can remember it shows two devices when you search for bluetooth.I choose the second and it works ok.The problem is how to set bluetooth on phone to be always on .

Hi nsourm,
Thanks for your reply.
This is my second SE Bluetooth I also had the prevoius non-OLED one and loved it.
I have paired up the audio with 2 phones and my Laptop and started up by pairing the second phone..
What I did not know is that you shuffle the Phone and the audio seperatly as I was not using the first on with 2 phones. So it was all down to finger trouble
To activate what audio you want long-hold the "play/pause" button and select (I knew that one) to shuffle the Phone, long-hold the "talk" button to select the phone you want.
This way you can hear music from any of the 3 devices and connect to any of the 2 phone's separately
I did just asume that I was connected to both phones at the same time??
Not a big problem, I still love this little player
The conclusion must be, as in most cases, if in doubt..... READ THE MANUAL!!!
Robert

Robert_it said:
Hi nsourm,
Thanks for your reply.
This is my second SE Bluetooth I also had the prevoius non-OLED one and loved it.
I have paired up the audio with 2 phones and my Laptop and started up by pairing the second phone..
What I did not know is that you shuffle the Phone and the audio seperatly as I was not using the first on with 2 phones. So it was all down to finger trouble
To activate what audio you want long-hold the "play/pause" button and select (I knew that one) to shuffle the Phone, long-hold the "talk" button to select the phone you want.
This way you can hear music from any of the 3 devices and connect to any of the 2 phone's separately
I did just asume that I was connected to both phones at the same time??
Not a big problem, I still love this little player
The conclusion must be, as in most cases, if in doubt..... READ THE MANUAL!!!
Robert
Click to expand...
Click to collapse
Unfortunately nothing found in the manual.Can you help me?

Help you with what?? what do you need to know???
There is a online manual on the Sony Eriksson web site but it is not the best
I will try the best I can if you mail me!
Robert

Robert_it said:
Help you with what?? what do you need to know???
There is a online manual on the Sony Eriksson web site but it is not the best
I will try the best I can if you mail me!
Robert
Click to expand...
Click to collapse
Thanks a lot Robert
Found the solution.
I remove all the apps from task manager auto kill and now it is working perfect.
Thanks again for your help

Track names
Hello:
Does this headset show you the track names?.
Mine doesn't show them at all. Also, if someone calls me, it only shows the number, but not its name.

Whipon said:
Hello:
Does this headset show you the track names?.
Mine doesn't show them at all. Also, if someone calls me, it only shows the number, but not its name.
Click to expand...
Click to collapse
As far as I know this is a well known compatibility problem between Android and these headsets and I heard both the problems you describe are fixable. Have not found the time to google this yet though... if I find something I'll let you know.
Nevertheless this is a great headset with virtually no weaknesses other than its lack of water resistance.

redThd said:
As far as I know this is a well known compatibility problem between Android and these headsets and I heard both the problems you describe are fixable. Have not found the time to google this yet though... if I find something I'll let you know.
Nevertheless this is a great headset with virtually no weaknesses other than its lack of water resistance.
Click to expand...
Click to collapse
Well, I bouught one from ebay but I still don't have the Atrix with me. I only expect I will be able to volume up and down, answer a phone call and change tracks.

redThd said:
As far as I know this is a well known compatibility problem between Android and these headsets and I heard both the problems you describe are fixable. Have not found the time to google this yet though... if I find something I'll let you know.
Nevertheless this is a great headset with virtually no weaknesses other than its lack of water resistance.
Click to expand...
Click to collapse
Couldn't find any fix for this issue.
But you're right, its a great headset ^^.
@joyo22
It does all of that, plus you have a fm radio. You can also fast forward or rewind.
Great buy.

Whipon said:
Couldn't find any fix for this issue.
But you're right, its a great headset ^^.
@joyo22
It does all of that, plus you have a fm radio. You can also fast forward or rewind.
Great buy.
Click to expand...
Click to collapse
Thanks man! Now I'm happy with my future purchase...

joyo22 said:
Thanks man! Now I'm happy with my future purchase...
Click to expand...
Click to collapse
It is an excellent accessory and works perfect with Atrix, I have it and do everything
1. identifies the incoming call
2. The FM radio works perfect
3. open and change the songs on the cell
4. autonomy is very good load
5. sound quality is good
6. the charger is the same cell so stay with 2 chargers.
Among others it is a good buy I recommend it