Hi,
I'm using the standard alarm on the TP II (not G-Alarm) and it has occured to me twice that my alarm did not ring in the morning! The phone was in the charger, alarm was set and I turned off the screen (not the phone, just the screen). Next morning I woke up and the alarm had switched off (even though it was set to ring every morning) and there was no little "bell" in the taskbar showing that I had missed a notification ...
Can't believe this is happening again. The sound of my TP continuously crashed also causing me to miss my morning alarms!
Anyone with the same problems in here?
Well, this is a WM bug. We alle hope that it will be solved with 6.5
It seems to be happening less with the tp2 when I compare it to my hermes though. Mine jus doesn't ring, Or when it doens't ring and you put your screen on, it starts to ring (being 2 hours late).
G-alarm removes this bug at install, at least, it asks you if g-alarm should do it.
Alright thanks.
Back to G-Alarm I guess...
I've had this same problem, and I'm quite annoyed, as it's not been an issue for me in ages with my Kaiser, Xperia.
I tried G-alarm ages ago on the Kaiser & it was unreliable. Can people vouch for it working properly, and getting all the way through an mp3 track rather than just playing 30 seconds or whatever? I may try it out again if this problem is not resolved.
I have had the problem of the alarm failing to go off. I never did on the Samsung omnia, with Samsungs own alarm. But no one’s managed to get it on any other wm device. So I use cradlealarm.
Not failed to go off, but it can be a nightmare to stop ringing.
Every winmo device I've ever used has had oem alarm issues. Not at all reliable. 3rd party is the way to go. No more issue.
yeah, right. 3rd party is the way. mine also having alarm problem, it won't ring when i tested it on the spot. was kinda disappointed, the damn phone cost alot and a simple alarm program couldn't work. i use 3rd party alarm and it works!
Didn't have problems on my Touch and on my Diamond, did have problems on my Touch Pro and now Touch Pro 2.
G-Alarm works flawlessly though DavidMC0. And you need more than 30 seconds to hear the alarm? Try setting it louder, I use the standard tune in G-Alarm, works great. Flip it over for snooze, shake it to turn it off...
I have the same problem on a Norwegian standard ROM... Which version of G-alarm do you use?
I have the same problem,
I use the 6.5 with manila 2.1 and i still have the same problem.
Anyone talked to HTC about that ?
We are not supose to buy 3rd part app when you have payed for a function that must work.
Oki,
I´ll just write to them then.
"Hello, I have Bought the wonderfull HTC Touch Pro 2. I´m a member of the XDA site plus many other and we have decided to write to you about a very Big problem. The Alarm does not Ring in the Morning and we have missed some important appoinments because of that. I know you have worked hard to achieve a great business phone, but what good is a buisness phone if you are missing your meetings ?"
What do you think Guys ?
???
Any One ???
Related
Long ago when I bought my old HTC P3600i, there was a bug on the O/S? that may cause alarm to not go off correctly.
Some alarm programs have this "Fix alarm bug" feature to fix this up. Do I still need that ticked on Touch Pro 2? Was that a bug on WM 6.0 or on WM 6.1?
My current alarm program, GAlarm has this and it automatically turns my phone on midnight to "fix" this bug. Wondering whether I can turn the feature off now on TP2?
The default alarm in the TP2 is good.
In the first 3 days i had my phone, i slept over. But thats because i doens't activate the vibrate i think...
Now, 3 weeks later, i still have no problems anymore. The alarm goes on correctly.
There are a lot of improved features in this phone!
Since WM 5, the alarm's been good, at least in my experience, and i've never had a problem using WM 6.1. However, there is a program that i used to use that would not only make sure the alarm rang, but it also added some new options:
http://digittips.blogspot.com/2006/01/full-reminder.html
I havent tested this on WM 6.1, but i'm reasonably certain it'll work. Make a backup just in case. Hope that helps.
Well I did have problems with the alarm. It wouldn't go off at times (while sound was on). Haven't got that problem yet with the TP2. Onlly time will tell.
Apparently it switches off every night with touchflo. I don't want to have to buy g-alarm to have to use what would seem like a simple function on a phone. Even if the alarm does manage to go off, it runs the risk of being too short. Should I just use my razr as an alarm again? this is ridiculous.
alarm
c0ach said:
Apparently it switches off every night with touchflo. I don't want to have to buy g-alarm to have to use what would seem like a simple function on a phone. Even if the alarm does manage to go off, it runs the risk of being too short. Should I just use my razr as an alarm again? this is ridiculous.
Click to expand...
Click to collapse
I use mine for an alarm every morning. Plugged in or not it still wakes me up.
Paying for G-Alarm? I must have an older version that was free. It works great.
I use it for 3 alarms.. Work, Class on saturday and Raid (WoW =)
All with TF3D 2.1 (EnergyROM).. no issues.
maybe i just had a bad rom. I just changed to energyrom. I'll see if I wake up on time tomorrow.
You can also try klaxon, i use it for waking up. http://forum.xda-developers.com/showthread.php?t=412669
alarms
klaxon has been my preferred since touch pro. you do have to open it now and again as sometimes it forgets- but once you have opened and shut it again its reliable (i assume its restarting the phone thats the culprit)
I had an X1 and never had a problem with the stock WM alarm.
Even with new energy rom TP2 alarm is a joke.
Say I set 3 alarms at 9.00am, 9.15am and 9.30am. After the 9.15 alarm I get up and turn the 9.30 alarm off. The main screen now shows no alarm or 9.00am for the next morning (depending on day).
At 9.30am the bloody alarm I just turned off will go off anyway!
Sometime if I say decide to have a nap and set an alarm for in 1 hour. Again it will not go off.
It seems to me that when you change the alarm it takes a while for the change to filter through. Similar thing happens when setting appointments. They don't always show up on the today screen for a while.
Anyone know of a fix for this or am I going to have to try a 3rd party ap? Is it something to do with the touchflo interface and would be solved by going for stock WM interface?
I have never had very good luck with the stock oem alarms on any htc device.(not used sony) I just get a 3rd party. I've had the spb alarm for years and transfer it over to any new device I get. Spb stuff just plain rocks and is very stable. Never had any issues with anything of theirs. That would be my advice. BAM! Done.
Cannot reproduce on my Sprint TP2.
The phantom alarm going off is something I can confirm on my T-Mobile TP2 with NRG ROM. Drives me nuts.
You guys should try to reproduce it with TFLO3D off - edit it straight it WM clock settings panel and see if it really is a "lag time" from TFLO3d to update WM or if it's just WM itself.
Using stock ROM (Vodafone) and the in-built alarm clost doesn't always work... not sure why, as it's random.
Anyone else got the same problem, or better still a reason why it's not working?
I am using a custom wav sound, which is large (attached) - but without it the alarm just doesn't wake me up!
The build-in alarm of WM is unreliable since it's birth.
Long, long time ago, when I overslept once more, I bought pTravelAlarm.
A few bucks and your problem is over.
(But there are also free alarms like Klaxon.)
I have not had any problems with the alarm actually going off. However, I have noticed that it will sometimes play not only the alarm sound but also the "reminder" sound. I'm not sure why this is and it doesn't seem to happen every day. I would suggest trying a smaller sound file or maybe set up a test of the alarm and your custom sound during some time when you can observe it. Perhaps you can see if there are any special conditions that make it not go off (other programs running, checking email or something, etc...)
I am having the same problem all of a sudden
It always worked on 6.1 (and some custom ROMs)
It worked on the official 6.5 ROM
I installed Tomtom and alarm stopped working. I removed it and the alarm worked. I installed some other apps (.NET 3.5, email scheduler, timesynctz, flitsnav) and the alarm stopped working. I haven't been able to pin it down on 1 app. I removed them one by one but the problem now persists...
I have had the same problem. Woke up to late and looked at the screen where it said that he couldn't connect to the internet (probably to sync my email). When I pressed ignore, the alarm went off, email came in etc.
Maybe it better to use Klaxon or G alarm...
Code:
[HKEY_CURRENT_USER\ControlPanel\Notifications\Sounds]
“Repeat”=dword:00000001
[HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}]
"Options"=dword:4000001B
Ok, what does that code snipit (registry settings) actuall mean/do???
Same thing here... alarm sometimes fails to go off. I have noticed when it happens that the clock is locked up and is not at the current time. Also the top left of the screen says "messaging" instead of "Start"
I've noticed the messaging deal pop up from time to time for no particular reason... and when it does the clock stops keeping time. I think the fact that the clock stops is the only reason the alarm fails to go off. Any button or screen press will unfreeze the clock.
This is on a TP2 T-Mobile official 6.5 rom. Reflashed several times, and problem always returns. Unsure if it happened on the original shipped rom.
I've had issue and changed to SPB Time, never had an issue there.
Are you sure your phone wasn't locking up in the middle of the night? I have had that happen, the Blank Screen of Death locks me up, the phone just sits idle and alarms don't go off.
has anyone tried the registry settings of HD2Owner? You have to add the new settings? How does it work?
This is common in 6.5. i used Galarm and Klaxxon.... but there are sometimes when the alarm doesnt sound..... someday i might get up late
someone tell me the fix for it, or a reliable alarm software please
y not just use the original alarm that comes with 6.5..i find that to be handy and have no problems with it..only if go to sleep late and wake up three hours later,i wont hear it,but thats because im in a deep sleep lol
Yes, the problem with the bundled alarm of 6.5 is LOW sound.... if it has HIGH sound, then there isnt any problem....anyone can suggest a remedy....
Same problem here.....
It might be related to fridays
I've been looking for a fix for ages - turns out it's fundamental to WinMo and there's no fix
There are two problems - one is that the alarm has a habit of just not going. Two is that at midnight the phone freezes until something unlocks it. The second can be fixed by hacking the registry to increase the time allowed for programs to run, but even then my phone found new ways of not setting the alarm. In the end I just bought an alarm after one too many oversleeps thanks to Microsoft.