i've just updated the ROM on my artemis, after CID unlocking etc. It was working fine, although it seemed to occasionally power off whilst copying files to it via AS. Thinking it was the SD card I removed it, and now it won't turn on. Plugging into power for a few mins gives a red light on the top, but I can't power the thing on.
Anyone want to give me some tips on what I can do to rescue it?
Download this HTC P3300 WWE factory rom here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar . Now first launch Bootloader (multi color screen) and just run the ROMUpdateUtility.exe from the rar, voila your device unbricked .
Bootloader: Press voice dialing & on/off button at the same time till you see a multi color screen (red/green/blue stripes)
landwomble said:
i've just updated the ROM on my artemis, after CID unlocking etc. It was working fine, although it seemed to occasionally power off whilst copying files to it via AS. Thinking it was the SD card I removed it, and now it won't turn on. Plugging into power for a few mins gives a red light on the top, but I can't power the thing on.
Anyone want to give me some tips on what I can do to rescue it?
Click to expand...
Click to collapse
Your mobile is actually turned on but backlight is set to lower so your screen does not appear. It 's a known bug changing backlight by itself. It happened to me too with Β&Β4 when I enable Batery Status tray Icons. And happened again on B&B 4.3 twice with no reason and Thanks God not to lower setting.
You have two options (both painfull).
1. Hard reset.
2. Reflash.
Good Luck
i thick it's easyer than reflash or hard reset, just plus the artemis to a usb or to the charger and your screen bright will be at full bright. Once done that, simply adjust the bright when running with battery at control panel.
moonshadow88 said:
i thick it's easyer than reflash or hard reset, just plus the artemis to a usb or to the charger and your screen bright will be at full bright. Once done that, simply adjust the bright when running with battery at control panel.
Click to expand...
Click to collapse
This did not work for me before. I hope you are more lucky.
nor for me - it's dead
freco said:
This did not work for me before. I hope you are more lucky.
Click to expand...
Click to collapse
I'm presuming that it's not actually related to the flash, until proved otherwise though - no-one else has reported any issues and as it was a 2nd hand but new to me handset it seems more likely it already had a fault. Annoying, though.
Ric
my friend had a similar problem with his charmer, although h never cooked it.
if you are in london, go to southall, they will fix it for £20
try plugging in to the charger if the little orange light comes on, its a phone fault, if the little light doesnt come on, your phone is not holding charge, either way can be fixed
Orbit cannot be switched on, and cannot be charged
patterns said:
my friend had a similar problem with his charmer, although h never cooked it.
if you are in london, go to southall, they will fix it for £20
try plugging in to the charger if the little orange light comes on, its a phone fault, if the little light doesnt come on, your phone is not holding charge, either way can be fixed
Click to expand...
Click to collapse
Hi, I'm having a similar problem as you described. When the charger is plugged into my Orbit, the little light does not come on. Moreover, when try to switch my phone on, it turns on and starts booting. But before it could boot further than the O2 splashscreen, it shuts off. Occassionally, I do succeed in turning it on, which it would turn it itself off at random from a few mins to a few hours after turning the phone on. I'm able to access the red, green, blue screen without any problems, and it can be turned on (ie the phone remains in the red, green blue screen) indefinately untill the battery runs out. I've tried re-flashing with the O2 official WM6 (which i was using for a few months already) which didn't make a difference. I'm able to access the phone through activesync just fine, but it wouldn't charge throughj the USB connection as well. I'm currently charging my battery with my friends Orbit.
Would any guru have any clue on what's going on with my phone? Can it be fixed?
I was upgrading my P3300 with WM6 through RUU with an official ROM and at 9% it gives me a connection problem.
I followed the recovery instructions as instruction by the RUU and at step 3/4 (when i have to turn on the PDA again) the PDA does not want to turn on.
Screen remains black, i tried to use the bootloader by pressing sound recorder and reset buttons to go to bootloader screen (red, green, blue) but no success.
I dont' want to believe it but is my PDA dead ?
Can someone help me ?
Hey dude,
Calm down.. don't worry..
Checked your Battery Status?
When you pressed Reset Button, "Green" & "Red" key blinks for a second? or totally back out?
Nothing happend, green and red buttons does not blink at all.
The phone is still off, and can't be turned on. Also when i plug the AC-Adapter on the phone, the battery led does not light on as usual.
Does this means that the battery is not working ?
hey guys, can someone help me PLZ
Hi gurus,
My touch pro2 is not turning on! When connected to USB, the red (charge indicator) light is coming up. I have no idea to make it working.
Kindly help me
Thank you
What happened just before this happened?
I had tried a hard-SPL replacement. After that the screen went blank and is not connecting thru ActiveSync. When connected to PC, the red light is blinking -hope it is getting charged. But after a couple of minutes, windows asking for QUADCOMM Driver. Installing this driver didn't make any difference. Would you help me want went wrong?
Since yesterday after I the device connecting new car charger.. every time it turns off the screen for more than three seconds .. Turn off the device with no sign of shutting down (no vibration of Lemuria shutdown or something like that).
As long as the screen is on the device is fine.
Now every time I connect the device to the computer is turn off.
If the screen is off more than a few seconds the device turn off, if it is connected to a charger you can turn it on only to connect the charger when is working and how he loads it.
According to what is a hardware problem but I'm not absolutely sure.
Please help me take the what the problem is and how to act.
Thank you!
Hi all,
I tried to clean my lens, but then I found out that the battery is very poor. I turned my phone on succesfully, but in a few seconds it turned off.
From this point I can't turn my phone on. I also change battery, but without success. Could you help me where should be a problem?
The phone is turning on, shows Nokia logo, Windows Phone logo and then said Goodbye and turned off.
When it is plug into the wall it is normally functional, but when I unplug my charger it immediatelly turns off.
Any idea please?
I tried to clean everything in it, but no success.
Please, do you have some ideas what to do?
Thank you.