Develop Bugs

LG KS20 NAVIGATION-BUG SOLVED(partially)

Guys,
For those that you bought the LG-KS20,propably you have noticed that there is a bug concerning voice announcements of Destinator or TOMTOM.
The voice announcements are cut off most of time.
But if you run in the background a windows media file (f.e an mp3 with no sound) you will see that the voice announcements are fully heard.
I was wondering if a kind developers can help us a bit and explain us why this is happening.
Best Regards

At least I made a small script to start the playback, then start TomTom and after closing TomTom stop the playback.
Maybe someone finds it useful.
Regards
Helmut

Thanks for you soft
i supposed it doesn't resolve the microphone probleme?
Is it possible to resolve the micro problem by the same kind of utilities?

Mouse007
I am the same one who has post post in the french <forummobile> which i was asking the sollution with the microphone.
The thing is that i test my phone yesterday through my office for 1 hour kai 15 minutes in GSM and 1 hour an 35 minutes with 3G.My Microphone did not turned off.
What can i say

moyse007 said:
Thanks for you soft
i supposed it doesn't resolve the microphone probleme?
Is it possible to resolve the micro problem by the same kind of utilities?
Click to expand...
Click to collapse
I'm sorry this has nothing to do with your microphone bug, but since I remember having similar problems with my old SDA smartphone, which were caused by bad hardware design, I would suggest to send your phone to the service center. Maybe some KS20 phones are having similar defects, too. I'm afraid there will be no software solution for this bug.
Regards
Helmut

Thanks a lot , but the problem affects all the ks20 when we're calling outside 3G reception
I'm sure the problem could be solved by the same kind of software ...

I had also this problem occasionally and my favorite PDA reseller / SFR (Vodafone France) representative explained that the same problem occured with Nokia 3G+ phone using SFR networks.
Actually the problem would not lie with LG nor the ROM but with the SFR 3G+ network when the phone is switching between 3G+ and GPRS. The solution - as recommended by Nokia France in an official note further to this problem - is actually simply to block the phone to GPRS (or 3G+ if always available) network (instead of letting it switch automatically) until SFR fixed their network problem. Of course, if blocked to GPRS, you will need to change this everytime you want to use 3G+.

giannis123 said:
Guys,
For those that you bought the LG-KS20,propably you have noticed that there is a bug concerning voice announcements of Destinator or TOMTOM.
The voice announcements are cut off most of time.
Click to expand...
Click to collapse
Maybe it cannot set the Audio buffer size properly... this bug involves not only Tomtom or Destinator but many other GPS navigation software too!!! This phone is FULL of BUGS!!!!! I've also try Miopap (iGo) software but it can't run in fullscreen mode because of top menu bar that cannot be hidden; then...this phone can't run any software using directDraw, so there's no 3D acceleration, no PointUI interface, no games, no iGo8...; I cannot use Skype and this due to the Qualcomm processor architecture...
hope a new rom is coming...now this phone (as is) sucks...

@gregnapola: Look into other posts - there IS a already a new row out for the KS20.
Greetings,
Pax

paxman said:
@gregnapola: Look into other posts - there IS a already a new row out for the KS20.
Greetings,
Pax
Click to expand...
Click to collapse
Thank you paxman, I've already seen it, but they're only SFR or German...I'm waiting for an English one at least(10e or better 10f)...so the only thing I can do now is playing (crying ) with my 10c italian ROM...

Here is the dutch version of the *Fix* for the LG KS20.
I also changed the dummy.asx a little. Instead of calling dummy.mp3 times 40. I've now made that script to call dummy.mp3 one time and then it will call dummy.asx again.
This means the loop is continuous instead of having it end after 40 times (20 hrs).
Hope it's useful.
I want to thank lindih for the original fix.

This is a cool looking phone.
Who is the maker of this phone? Quanta, the maker of O2 Atom?

CWKJ said:
This is a cool looking phone.
Who is the maker of this phone? Quanta, the maker of O2 Atom?
Click to expand...
Click to collapse
I don't know exactly where all the hardware pieces are from, but the phone is sold by LG and caries the LG logo. So I suspect it could be made by LG.

lindih said:
At least I made a small script to start the playback, then start TomTom and after closing TomTom stop the playback.
Maybe someone finds it useful.
Regards
Helmut
Click to expand...
Click to collapse
Hi I have downloaded the file and see the folders and files inside can you please confirm the steps required to install.
I assumed copying the files into the relevent folders on the device is this correct?. and where do i put the "MortScript-4.1-PPC.cab" file and what do i do with it? do i just install it?
Cheers
Darren (NEWBE)

Get rid of operator "Get More..." on T-Mobile USA

I'm running the new "HTC_WWE_1.33.422.1_4.1.13.51_03.07.90_Ship" and my operator comes up as "Get More..." Which is pretty lame. Anyone figured out a way to change this? My digging through the registry turned up nil.
Help?

Chances are, no. It's a feature of the SIM card to be able to hold custom names that the operator wants to display. It's called EONS (Enhanced Operator Name Service, I believe). There's no way that I know of to tell WM to ignore it.

Well shoot, now i'm stumped. On the t-mob ship roms it came up fine. The HTC rom says Get More..., strange. I also have a t-mob wing (herald) and the touch-it rom said the same thing (Get More...).
This seems to be something common with roms designed for markets other than north america. Thanx for the input.

theformula said:
Well shoot, now i'm stumped. On the t-mob ship roms it came up fine. The HTC rom says Get More..., strange. I also have a t-mob wing (herald) and the touch-it rom said the same thing (Get More...).
This seems to be something common with roms designed for markets other than north america. Thanx for the input.
Click to expand...
Click to collapse
I know how. Let me look for the instructions. It works fine on my dash. just give me a few.
edit: here you go.
http://www.howardforums.com/showthread.php?t=1079716&highlight=network
good luck. Worked for me. Might have to play around with it to get it to work. You don't have to reboot the whole phone to show the new network name. just go into the communications manager and hit 1 (or turn off phone) then re-enable it)

It works but switches back whenever u soft reset. I don't see the big deal to be honest.

.PoNeH said:
It works but switches back whenever u soft reset. I don't see the big deal to be honest.
Click to expand...
Click to collapse
Not a big deal, but an annoyance Thanks for trying guys.

.PoNeH said:
It works but switches back whenever u soft reset. I don't see the big deal to be honest.
Click to expand...
Click to collapse
not a big deal because it is not happening with you.
i was wondering if we can somehow edit the operator's name into something else. like.. "blah is blah"

Click the link in the 4th post. It explains how to change the operators name.

quiksand said:
Click the link in the 4th post. It explains how to change the operators name.
Click to expand...
Click to collapse
Check the 5th post because it reverts right back after a soft reset

Problem with new WM6.1 ROM

Hey everyone, got a quick question.
I just finished installing the WM6.1 ROM for my T-Mobile dash, and it looks really nice. Everything is working fine, but I have two small problems.
The first thing is that for some reason, my phone wants to put a + in front of all outgoing calls. So if i make a contact in my address book with the phone number of 212-555-1212 and try to call them, the phone places the call as +2125551212 and I get an error from tmobile saying that 'The international phone call you are trying to make cannot be completed...' I realize that + denotes the international dialing prefix, and I can get around it by setting up all my contacts with a '1' before the area code, but there has to be a simpler solution as this was not the case with the original rom. If I dial a number normally, it doesn't put the + before it. Any ideas?
Lastly, I am having a hard time finding out how to disable the JOGGR from doing in-call volume adjustments. While I like it for scrolling, I find it really annoying in phone calls as it is constantly missreading my face as my finger and adjusting the volume up and down. In the original t-mobile rom there was an option under settings for it, but I can't see it in the new rom. I went into the registry editor and tried disabling one function that looked like what I wanted to turn off, but it didn't work.
Any help would be greatly appreciated. Thanks!
-James

No idea about the + but the JOGGR disable is still in the Settings. It is on the 3rd page, #3 JOGGR.

choekstr said:
No idea about the + but the JOGGR disable is still in the Settings. It is on the 3rd page, #3 JOGGR.
Click to expand...
Click to collapse
Thanks for the reply. Yeah, I am able to disable the JOGGR completely using that, but I was hoping for a way to use it for scrolling, but not for volume control.
In regards to the + problem, I went through every option in Settings and couldn't find anything. All the Regional information is correct. I even used the RegEditor to search for + in the entire registry, and it came up with nothing relevant.... Weird. Especially because even if this is an international version, there shouldn't be a + in front of all calls by default, because that would force an international call no matter what country you are in...

Well, I think that it fixed it self in regards to the + problem. Even though I had done so before to no success, figuring that it is running a Microsoft product, a couple of reboots later and it seems to have gone away. Hopefully this isn't a bug that will continue to resurface or is the tip of a larger iceberg.

Just FYI, the + is the prefix for international dialing. If you input all your contacts as +1-404-555-1212 you won't have the problem (1 is the country code for the USA). Another plus to this method is that, if you should go outside the US to a country that uses the GSM network, you can dial your contacts directly via whatever carrier you're on there.

[Q] New boy question

Hi, I've come from a Z2 as couldn't get on with it. So far I'm very impressed with G3, though when in the shop I saw it had an option on the lockscreen to tap the numbers 1-4 in succession and the numbers appear in a bubble and they move across the screen as you tap a number. I presume it was a version on knock on. I assume it isn't carrier specific but I do not have it on my unbranded G3 (Its runnning V10L). I'd hate to come across as a noob but has this option been replaced by updated firmware? The only other option I can think of is it is some sort of demo function for use in stores.
Thanks for any assistance...
Ross

Carrier Specific
Well to be honest I've flashed almost all the firmware that LG has released and I have never seen that before, so I'm thinking that it may have to be carrier specific and by the way I have the D855 unlocked international version. I hope that I helped you.

Hi I am pretty sure that is a demo function to show people how the knock-on works.
For the real thing, it will not be much of a pass-code if the phone shows you the sequence to knock!

Samsung Smart Call

I've got unlocked Note 10+ and I flashed the U firmware because of video calling that's missing on U1. Now I found that on T Mobile version there is no Smart Call and it is replaced by T Mobile NameID, which I consider inferior and I'd have to pay for full functionality.
Anybody knows if there is any way how to get the stock Samsung dialer with Smart Call back? I'd hate to flash the U1 ROM and go through the restore process again. Even with Samsung cloud, Google and SD backups it took me almost half day to get it set as I had it before.

Stank0 said:
I've got unlocked Note 10+ and I flashed the U firmware because of video calling that's missing on U1. Now I found that on T Mobile version there is no Smart Call and it is replaced by T Mobile NameID, which I consider inferior and I'd have to pay for full functionality.
Anybody knows if there is any way how to get the stock Samsung dialer with Smart Call back? I'd hate to flash the U1 ROM and go through the restore process again. Even with Samsung cloud, Google and SD backups it took me almost half day to get it set as I had it before.
Click to expand...
Click to collapse
My past experience with Samsung Smart Call, was that i found that even though, its baked into Samsung Firmware, it is Service Provider depended. to "activate /work".
I might be wrong, but i personally believe so, based on my experience.
Just to recap, my experiences with my old Note 8 and my Note 9 (both devices not rooted)
I also flashed Stock Samsung firmware .. different CSC onto these devices.
I found on both occasions i lost the function of th Smart Call.
( Hiya services), also Volte function etc etc.
I could see the Smart Call settings in firmware, but it was greyed out.
Could not enable it at all.
When i flashed my old Samsung Firmware (Service Provider CSC) Smart Call (Hiya services), was enabled again and working.
I'm sure in your case, you'll will find it's Service Provider depended.
Good luck.

willcor said:
My past experience with Samsung Smart Call, was that i found that even though, its baked into Samsung Firmware, it is Service Provider depended. to "activate /work".
I might be wrong, but i personally believe so, based on my experience.
I'm sure in your case, you'll will find it's Service Provider depended.
Good luck.
Click to expand...
Click to collapse
The thing is, after I purchased and set up the phone on stock Samsung firmware, VoLTE and Smart Call worked perfectly fine. But stupid me wanted to try the video calling. I found that the video calling is not different than Google Duo and I will NEVER use RTT texts. I see no real advantage from using T Mo firmware in comparison with stock Samsung (provisioned for T Mo of course)
Actually quite the opposite. For me, the signal strength and battery life is practically the same on both and again, FOR ME Smart Call is much more useful than video call and RTT.
If anyone knows any benefits from keeping T Mo firmware over stock, please enlighten me. I really don't want to go through the flashing the whole thing and restoring dance again, but I'm afraid I will have to.

Stank0 said:
The thing is, after I purchased and set up the phone on stock Samsung firmware, VoLTE and Smart Call worked perfectly fine. But stupid me wanted to try the video calling. I found that the video calling is not different than Google Duo and I will NEVER use RTT texts. I see no real advantage from using T Mo firmware in comparison with stock Samsung (provisioned for T Mo of course)
Actually quite the opposite. For me, the signal strength and battery life is practically the same on both and again, FOR ME Smart Call is much more useful than video call and RTT.
If anyone knows any benefits from keeping T Mo firmware over stock, please enlighten me. I really don't want to go through the flashing the whole thing and restoring dance again, but I'm afraid I will have to.
Click to expand...
Click to collapse
Ha, your post reminds me,
that when i flashed
my branded Samsung Firmware ( Voda CSC) with the Samsung unbranded Firmware,
The reason, was also to get video calling working.
As my branded device did not have video calling option on dialer.
I could only activate video, if someone else, video called me... only then the video option, would appear.!
I then afterwards, realized that i lost my Smart Call functions. and flashed back to the branded software.
This was on my Note 9.
So i had no video call option on dialer ,but Smart Call.
Now...
again, with my branded( Voda CSC) Note 10 +,
i see that my device has video calling on dial pad.....!
So, the Service Providers, chop and changed.
A year back, they disabled video calling option, from dial pad.
Now video calling is back on the dial pad plus Smart Calls is working fine.
Good luck

So.... I bit the bullet and flashed back the U1 firmware. The only thing I lost is the video calling. I still have RTT button on my dialer. Whether it works or not I haven't tried yet. I know it wasn't there on the original dialer when I purchased the phone. Maybe because I didn't flash USERDATA? Who knows.
I'm happy I've got Smart Call back.

CSC N975U
Good afternoon, I have the n975u model, my question is what firmware should I install, to get the smart call and video calls by duo?. Or is csc the one that has these functions active?
Thanks!!
excuse my english, google translator.

I have a Verizon Note10+ running Android 11 (3.1) I paid my cell off 4 mo ago. Verizon confirmed for me that my cell is carrier unlocked. I've tried everything to get the Smart Call app on my phone to work. The only thing I haven't tried is rooting it cause I don't know how. I have 3 versions of the apk and can't make them work. Can anyone help?