(Click the images to download)
Donations are much appreciated!
Introduction:
This is an adaptation (and at the same time final version) of my previously released tsowen's adaptation.
I had changed a few things a while back and finished it up recently, deciding it was good enough to share.
So, without further ado..!
Features:
- Bouncing SE-logo loading icon
- SE Start logo
- 1% Battery level increments (Ethermind)
Acknowledgements:
- Tsowen: Most of the icons used in this taskbar.
- Ahen: The battery icons
- Ethermind: 1% battery level increments DLL
- Gtrab: General help and debugging
Installation:
- Download the .cab file
- Copy the file to your device or memory card
- Run the .cab and install it to main memory
- Restart your phone
Compatibility:
- WM6.1 compatible (WM6.5 version will be released soon)
- Should work with all X1 ROMs
- Also compatible with other HTC WVGA devices.
Related Links:
- AnX1 Actionscreen v1.2
- TF3D2 Skin AnX1 Nature's Grace V1.0
Donations are much appreciated!
Looking good
Gonna try
Thanks for your hard works and contribs mate
thanks for this one...gonna try it...
i have installed the cab file and stored it in my main memory but there is no change in the icons... do i need another file or anything?
Did you soft-reset?
If you have SDKcerts installed and install this to your main memory, they should all show up right away.
If you keep having problems, I'd say something else gets in the way. Try a hard-reset and then try installing this again.
Looks really nice.
Got an ETA of wm6.5 variant?
ive done a soft reset... some icons appear but the start icon is the same ass well as the phone signal icon. do i have to do something else to get these to change over
bdolan said:
ive done a soft reset... some icons appear but the start icon is the same ass well as the phone signal icon. do i have to do something else to get these to change over
Click to expand...
Click to collapse
Did you install SDKcerts.cab?
Great app!
Regards,
CJ
Dear Angelusz, any ATA on the 6.5 version? Been using your icons on my Xperia running on Win 6.1 with IT ROM 10.2 but just recently switched to Win 6.5 and there are not many iconsets around wich look any good, at least not as good as yours....;-)
ET said:
Dear Angelusz, any ATA on the 6.5 version? Been using your icons on my Xperia running on Win 6.1 with IT ROM 10.2 but just recently switched to Win 6.5 and there are not many iconsets around wich look any good, at least not as good as yours....;-)
Click to expand...
Click to collapse
Try these while waiting:
edit: removed link
Lokatho said:
Try these while waiting:
http://forum.xda-developers.com/showpost.php?p=3746654&postcount=6
Click to expand...
Click to collapse
Been using that iconset for a day but i don't like it that much. Thanx anyway for the tip.
At the mo i use the iconset from the HTC Blackstone by Gfreek.
Lokatho said:
Try these while waiting:
http://forum.xda-developers.com/showpost.php?p=3746654&postcount=6
Click to expand...
Click to collapse
Although it's tsowen's work - which makes it inherently cool - I don't like having a link to someone else's work in my thread. Please be so kind to remove it. Same goes for others linking in here.
EDIT:
Almost forgot to answer the question! I have one more week of university left - after that it's seas of free time (can't wait!). I will be modifying this for WM6.5 then. So, little more than a week!
Angelusz said:
Although it's tsowen's work - which makes it inherently cool - I don't like having a link to someone else's work in my thread. Please be so kind to remove it. Same goes for others linking in here.
EDIT:
Almost forgot to answer the question! I have one more week of university left - after that it's seas of free time (can't wait!). I will be modifying this for WM6.5 then. So, little more than a week!
Click to expand...
Click to collapse
My appologies, removed link in my post.
GPS Icon
Is the GPS icon suppose to appear when you activate the internal GPS
Zodiac69 said:
Is the GPS icon suppose to appear when you activate the internal GPS
Click to expand...
Click to collapse
I'm not sure. If it does - I guess so. Is it a problem?
No GPS icon
I was hoping to see the GPS icon when the GPS is enabled, no luck.
Google Maps work and Garmin, but no GPS icon. It will be nice to see when your GPS module is active and when it is not.
If you whant me to try some fixes for you, please inform me what to do and i shall test them for you
Actually, I don't think the GPS icon ever shows with the internal GPS. Though I'm not 100% sure on that part.
Dear Angelusz, thanks a lot! I was using tsowen v3 1.4 on my Topaz and liked it very much. However my device would freeze if I ever wanted to change volume. With your taskbar 2.2 there is no more kinky volume control Now I'm a very happy man!
Is there any update for winMO 6.5?
Hi.
Like others said there is a problem with signal icon. I can see the new signal icon, but there is no power level of signal and there is no diffrent icon while changing GSM freq. (gsm/edge/hspa).
There is a problem only in winMO 6.5 (my is Christian.SE.2)
In winMO 6.1 there wasn't any problems.
Related
Look here for new thread
http://forum.xda-developers.com/showthread.php?t=278191
Look here for new thread
http://forum.xda-developers.com/showthread.php?t=278191
Whats new / fixed in this ROM compared to the others?
THERE IS NO ROM
When i clicked the above link it says there is no rom on the server
It is sorry wrong link
Sorry I posted the wrong link. It is now corrected.
Bug
Ok I've just installed this. The menus are missing 'Settings', and there's no way to get to many of the programs such as Explorer, IE or any games.
There's also the nice Chinese glyph where there's normally the keyboard icon at the bottom of the menus.
... but it does work so good alpha
Alpha2 will come in some minutes.
Alpha 2 is out.
Startmenu is now functioning.
where is the link
where is the link now
Look at start post Alpha1 is on server, Alpha2 is at 80 percent and going.
Alpha2 is up.
then post a link
then please post link
As i said before look at the first post.
ftp://xda:[email protected]_AKU3_WWE/UNI_AKU3_CHS_2_WWE_IVAN_alpha2.rar
rbmerlin said:
Hi.
I remember reading a few posts with people wanting to remove the battery icon on the top bar of today screen.
I don't have an universal to test this, but on my iPAQ hw6945 device I have to play around with, the battery icon isn't there...
In the registery at
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\
There is a DWORD key called "ShowTitleBarClock"
If I set this to 1, I get a clock on the top bar and no battery icon
If I set this to 0, I get a battery icon and no clock...
This might work on other WM5 devices to remove the battery icon!
Merlin
Click to expand...
Click to collapse
This^ works.
AKU3
Whats the verdict. Whats not working ) I would love to try it but as the universal is my main phone/pda and I use it alot I'm a little nervous about upgrading. Any noticeable improvements?
I have the ROM ready to upgrade if I get that fuzzy feeling from the crowd.
Re: AKU3
WizP said:
Whats the verdict. Whats not working ) I would love to try it but as the universal is my main phone/pda and I use it alot I'm a little nervous about upgrading. Any noticeable improvements?
I have the ROM ready to upgrade if I get that fuzzy feeling from the crowd.
Click to expand...
Click to collapse
same question.
basically ready to flash
cheers
hrb
I would say the typical AKU3 improvements.
But it is a beta AKU3.
I will test the alpha3 build and after the weekend i can say more about it.
Cool!
Alpha 2 worked like a charm. I used the I-mate AKU2 extrom which did its thing quite happily (just asks you if you want to run the unsigned exe first).
Got the menus, all the usual programs and settings. Most of all - I HAVE MY BELOVED TIME AGAIN!!!!!!
I have tried basic stuff like making calls, but will carry on over the weekend.
Only interesting thing so far is the chinese glyph for the keyboard, and the ones in the soft keyboard.
Great work!
Exactly those are definitely on the todo list.
I've just installed it and I'm playing with it right now, first thing I miss is my english keyboard, all in chines, not good for me :-(
If there is no option for an english keyboard I thing I'm gonna go right back to my previous rom
However I found new things in this ROM like
in Programs, I have now 2 extra buttons:
Bluetooth stereo headphone
Internet connecztion sharing
In Settings also something new
an extra Wireless manageron top os the usual one
an USB to PC button witch seems to add extra possibilities to ActiveSync (did not test yet)
I'll go on playing and hope others here will take the step to update and let us know what's up;-)
Greet
New ROM release From LegolasTheElf
LegolasTheElf said:
Stand by, I've been cooking. I took LVSW's most awesome ROM, and made some minor changes.
1) Messenger and Live Integration
2) Live Search!
3) X-Button (although, I don't like it personally )
4) Removed Cyberon
5) BIG STORAGE!
Click to expand...
Click to collapse
You will find it HERE
Enjoy people.
Upgrade Guide for WM6 Elf Edition
Enjoy
Lets keep this thread clean please....only post about this ROM.
Space reserved for any comments by our resident in spirit elf
link for high speed http mirror sent to legolas, it will be posted on the other forum!
Awesome rom
Stable and all included
Nice work
I cannot unlock Ext flash with this rom, it was accesable on Dutty's rom
Hi Chamelion any possibility to put a link for this rom, in another friendly site like megaupload, I also don't like rapidshare at all. Thanks
So far great ROM..
Thanks for not including cyberon vc it makes it much easier to get ms vc going.
Everything else seems to work just fine, but voice dialling ain't working (Error opening the short cut). This same happened with lvsw's version (and with Black 3.0).
How do I fix this?
[edit]
Never mind, just installed Cyberion Voice Dialer.cab
[/edit]
carbunco said:
Hi Chamelion any possibility to put a link for this rom, in another friendly site like megaupload, I also don't like rapidshare at all. Thanks
Click to expand...
Click to collapse
got an even friendlier site called zimuhost.getmyip.com
there's a high speed HTTP mirror posted in the forum that the original posters link links to. i'm anti rapidshare, hence me starting up the file hosting thing!
I found another problem, that I never had before When I change anything via control panel Today, then nothing really happend, only after SR.This is odd, because if I want to use SPB products, then I must SR device each time, I make any changes. Till now I did not read or search on forum about this problem (or if somebody actually have same problem as I), I going to flash device again only if problem did not dissapear, then I start looking for answers.
PS: with original LVSW last version this problem was not.
/update\
now I find some posts about this prob here till now, no sollution.
For those of you who want ms vc over headset.
Its probably best to not have the headset paired so unpair it and just add it after all the steps.
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
I take no credit for this program it was done by XCSdM and later modified by ZaJules..
This works perfect for me no other tricks or reg edits zilch, nada, nothing. You might want to set voice command to button 5 though.
Is the x-button works like it should with elf version? I mean does the exclusive click working & what build is in this ROM version? thanks in advance
today not refreshing only after SR
For those who have problem with Today settings, this is reply and solution from LegolasTheElf copied from his forum - thank you
"It's looking like that today screen issue is caused by the X-Button. To remove it, go to the Remove Programs settings applet and remove it. Because of the way this ROM is built, you can remove my additions I'm actually going to be building my ROM's in a different way than anyone else--by using mostly CABs to do the customization rather than imbedding into the ROM itself. IMHO, this is a better design as it allows people to customize their device, and reclaim storage space if they don't like the items I've included in the ROM "
sinmae said:
For those who have problem with Today settings, this is reply and solution from LegolasTheElf copied from his forum - thank you
"It's looking like that today screen issue is caused by the X-Button. To remove it, go to the Remove Programs settings applet and remove it. Because of the way this ROM is built, you can remove my additions I'm actually going to be building my ROM's in a different way than anyone else--by using mostly CABs to do the customization rather than imbedding into the ROM itself. IMHO, this is a better design as it allows people to customize their device, and reclaim storage space if they don't like the items I've included in the ROM "
Click to expand...
Click to collapse
thats good enuf! ..thanks for the info bro
sinmae said:
For those who have problem with Today settings, this is reply and solution from LegolasTheElf copied from his forum - thank you
"It's looking like that today screen issue is caused by the X-Button. To remove it, go to the Remove Programs settings applet and remove it. Because of the way this ROM is built, you can remove my additions I'm actually going to be building my ROM's in a different way than anyone else--by using mostly CABs to do the customization rather than imbedding into the ROM itself. IMHO, this is a better design as it allows people to customize their device, and reclaim storage space if they don't like the items I've included in the ROM "
Click to expand...
Click to collapse
That´s exactly what I´ve tried today and so far so good.... it´s a pity as I liked the new version of x button!! Maybe our great chefs can find a solution at some point...
Sorry. I have got a little problem.
Can I make the Windows Live Search bar for "Transparency" background from today screen?
lewisleung said:
Sorry. I have got a little problem.
Can I make the Windows Live Search bar for "Transparency" background from today screen?
Click to expand...
Click to collapse
u can't ..my way of doing it is to uninstall the apps, go to settings/remove programs ..and then install the one here http://rapidshare.com/files/32749891/WLM.rar.html
or another way, is to use sleuth developers variation of this LVSW ROM.. (it is pre-installed with the transparent windows live search bar)
kipe said:
u can't ..my way of doing it is to uninstall the apps, go to settings/remove programs ..and then install the one here http://rapidshare.com/files/32749891/WLM.rar.html
or another way, is to use sleuth developers variation of this LVSW ROM.. (it is pre-installed with the transparent windows live search bar)
Click to expand...
Click to collapse
Thanks!
um... What version is it? BETA or Non BETA?
lewisleung said:
Thanks!
um... What version is it? BETA or Non BETA?
Click to expand...
Click to collapse
version 10.6.0026.1400 ..it's non beta
Well, I WAS going to wait for a newer 1774x rom, but, given the fact that this ROM is working so well, I see no reason not to continue to use 17913 to cook my ROM..
So, hang tight for some new Elfishness in the coming days
@all,
!!!PLEASE KEEP THIS AN INFORMATIVE THREAD!!!!
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)-- SOLVED
many thanx
thormdac said:
@all,
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)
many thanx
( @tom:should this not be in your intrest, pls. let me know-I will remove thread in this case )
Click to expand...
Click to collapse
Use finger from the top bar, to the bottom bar
thormdac said:
@all,
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)
many thanx
( @tom:should this not be in your intrest, pls. let me know-I will remove thread in this case )
Click to expand...
Click to collapse
Touch Flo enable = Simple do a slide from top toolbar on the bar down to the buttom toolbar
Cheers..!
where is the new romm 4.1 for download? please, thanks
@imstill,
Deleted to keep as an information thread only
@tom,
btw.: device information displays rom version as v4.0wwe
thormdac said:
@imstill,
believe me, I am definately NOT blind. (thanx for your comment here)
@tom,
I have investigated more than once: no touchflo nowhere to be found! neither under settings, nor in programs or elsewhere!
btw.: device information displays rom version as v4.0wwe
Click to expand...
Click to collapse
Hey thormdac my friend..!
[email protected] only Joked.Hope u understand.I update support Touch Flo cube not button.
If u don't understand see this video :
http://youtube.com/watch?v=zQBOespJRfU
Cheers...!
and again [email protected] only Joked.U and [email protected] also very good man for me.
I found only two little things:
1- the clock on the top bar is not sinchronized with the htc home clock (when this switch, the first switch about 10 seconds after)
2- every time I make a call the receiver volume is always set at min. also if I set to max.
Anyway, they are not important and Tom is great.
Weehaa... looks great...
I´m really curious about it.
Deleted to keep as an information thread only
Deleted to keep as an information thread only
Deleted to keep as an information thread only
More Findings
1. Touchflo works well without the hardware button...when you finally find it
2. No obvious signs of the auto vibrate sound profile issue, either when adding an appointment or when an appointment come around. Haven't tested the auto profile yet though - just enjoying not having to turn my system sound back on every five minutes
3. The camera seems to work quickly and properly - nothing new or sexy to it, but working is sexy enough for me
4. The touchflo cube config module is better and slicker
5. It feels more stable and a bit faster - highly subjective, I know
6. I thought I had a few issues with ActiveSync at first - dropping connections, USb device not recognised -but that seems to have settled down
7. I haven't yet found anything I could describe as a bug but I'm still looking
Tom's done a very good job here - good work fella! He copped a little unfair flak around 4.0, as did the testers. This is not a commercial release - it's what you want to make of it. If you don't like it, or it doesn't work it's no-one's fault, just your tough luck. That's the risk you embrace when you move off of the OEM ROM. If it doesn't work don't donate - it IS optional - and use a different ROM.
This will do nicely for me in the meantime.
I don't make it for "Donate"
For all : I don't make it for "Donate"
Remember i make it for us.And make it because i like this work...
Have people donated to me and said.He already donated and tell me need share link for him.
I don't want share link because this only beta version.Still have bugs.I need test and Fix it before release v4.1.My Rom always free for all people like my Rom.Donate to me if u like my work, don't donate and tell i need make.. ect ect..
Please understand me...!
thormdac said:
where i come this is also making fun of people!
may it be as it is, I feel like closing this thread--it wasnt ment for gossipping around!
Click to expand...
Click to collapse
You have PM
just a suggestion
Hi tom... everything goes well and works ok except that phonepad input problem.. bythe way i have a suggestion to the cube enabling process.. as far as i know in the actual HTC touch the cube is enebled when your slide the finger from top to bottom.. I think you have reversed it .. in this rom and the previous one exit is by this method.. If you can modify this setting easily can u update in the final version... If u cant also no problem as this rom is great.. Keep up the good work....
cheers and good luck to your studies...
Hi all
AFter install tomtom software whit tomtom Home the button 1 is set whit tomtom.I have copy touchflo.lnk from /windows/applauncher to /windows/startmenu/programs (this file is hidden) and set button 1 for start touchflow now
tnx tom
infido said:
Hi all
AFter install tomtom software whit tomtom Home the button 1 is set whit tomtom.I have copy touchflo.lnk from /windows/applauncher to /windows/startmenu/programs (this file is hidden) and set button 1 for start touchflow now
tnx tom
Click to expand...
Click to collapse
Any question........
if settings/connections/Usb to pc/ Enable advanced network functionality is check my activesync not work
sorry i have solve this problem of drivers on my pc
I just want to say, I would help Tom if I could. My B&B4.0 works still fine.
diego1810 said:
2- every time I make a call the receiver volume is always set at min. also if I set to max.
Click to expand...
Click to collapse
definately cant confirm this! running smoothly here!
One issue,
not Rom related (i think)
installed TCMP 0.72 RC1 and FlashVideoBundle.
When going to www.youtube.com.
Explores hangs.
But it is the only issue i could find
Hello everyone. I've been working on this project today and I'd like to share my work. This is the mini version of NRG ChomeWeather 3.1... MiniWeather 1.0.
It's only got ONE layout and that's a 5 day layout as seen in the screenshots below. It's portrait device compatible so feel to install on Tornado's and such. This version also hopefully corrects the problem people have been experiencing with the phone locking up while the keyboard was locked and the weather app was updated.
This version also has a solid autoupdate routine that hasn't failed me once in the last 3 days.
All in all, I believe this is a rock solid version and I've tried to anticipate any bugs that may occur. Think of this as a light version of NRG Weather 3.1, as it's only 2 megs in size.
However, I will stop development of the old 3.1 version and just improve this. I hope you like this... and please report any issues. Thank you.
A few words for the newbs... After you install and reboot, please set your location code in the Options. Then update.
In order for the detailed forecast panels to show updated information, the phone HAS to be rebooted. There's no way around this... YET. I'm currently
working on moving from the CTestUIPanel to another panel, but not ready to do so... yet.
Features:
- Autoupdate according to Yahoo servers' time + 10 minutes + 1-5 random minutes (so we don't all hit the server at the same exact times)
- Update in 15 minutes when no connection is found.
- First forecast day info comes from Yahoo... the rest from weather.com
- Verbose status information as the script is running.
- Minimal set of icons to save space.
- Detailed Forecast panels can be turned off in "Advanced Options"
- Application will not automatically refresh the screen while the phone's keypad is locked.
- Built-in leftover notifications removal tool, in case you want to uninstall. See "advanced options".
October 18th - 1.2 Release
- Twice as fast current forecast download.
- Only one layout supported.
- Revised layout and removed the monitor, for now.
- Blue / black backgrounds behind the temp and hi low indicators, actually follow the official sunrise/sunset of the location selected.
It updates in 15 seconds or less now...
etc...
Download links:
BlackJack II + RAM&Battery monitor version
http://www.sendspace.com/file/3g3ad9
Regular(HTC) + RAM&Battery monitor version
http://www.sendspace.com/file/9v2urj
Regular version for any device, without the monitor
http://www.sendspace.com/file/j7xz5w
WARNING - Do NOT install to the storage card !
If you like this application and feel the need to support my work, here's a link to donate to me via PayPal.
PayPal Donate Link
This is a preliminary release of MiniWeather 1.3 with support for the new 20279 core which has a different Chome platform. This version is NO different than 1.2 and it ONLY works on the "Rose" based ROMs, including my own Excalibur version.
http://www.sendspace.com/file/jp6g9a
Non fully tested yet, so if there's any bugs, let me know. Oh, you might have to go to homescreen options and pick one of the MiniWeather layouts
Reserver for later...
Looks Really GREAT!
Thanks! You're the man.... I am really loving it.
Good job man, and did you get your account back the NRG one... so you dont have the organic one anymore?
Seems like it.....
NRGZ28 said:
Seems like it.....
Click to expand...
Click to collapse
how did you get your name changed?
Good work man. You always have been really good at putting together a nice, clean package and no different here. Glad to here your planning on moving forward from testui and feel free to use any ideas we might have introduced. I think there's room for all of us here, and that's cool the way you made blue/black deal to reflect time. Great idea!
Looking goooood!
Great job Org (sorry, NRG). Works great. Really simple to use (as it should be) and awesome looks. The only thing I found is that for some reason it doesn't show low values on cTestUI. It's been happening since a couple of versions ago on my device (although I've uninstalled before installing this new one). Here's a SS of what I'm talking about. I think maybe it's some residual reg values or misplaced pics.
Anyway, it's a great app. Thanks for all the hard work
Hi NRG/Org.....
As usual your work is wonderful, this version works like a charm and seems that my phone has about 1 Mb more of memory free, thanks for your amazing work, waiting for your new version without the testui panel......
germansak said:
Great job Org (sorry, NRG). Works great. Really simple to use (as it should be) and awesome looks. The only thing I found is that for some reason it doesn't show low values on cTestUI. It's been happening since a couple of versions ago on my device (although I've uninstalled before installing this new one). Here's a SS of what I'm talking about. I think maybe it's some residual reg values or misplaced pics.
Anyway, it's a great app. Thanks for all the hard work
Click to expand...
Click to collapse
Well I figured out what the problem was. The script wasn't equipped to handle single digit temperatures Now it is and the second post was updated with a new cab. You can just use the attached "patch" cab if you've already installed the application. That way you don't have to reinstall everything. Thanks for the heads up on this.
showaco said:
Good work man. You always have been really good at putting together a nice, clean package and no different here. Glad to here your planning on moving forward from testui and feel free to use any ideas we might have introduced. I think there's room for all of us here, and that's cool the way you made blue/black deal to reflect time. Great idea!
Click to expand...
Click to collapse
Glad you like it. I put a lot of effort into this to make sure it's perfect and so far it looks like there's no issues after 70 downloads and no bug reports Hey, do you guys need a cab made for outerdepth's mod to my app ?
NRGZ28 said:
Glad you like it. I put a lot of effort into this to make sure it's perfect and so far it looks like there's no issues after 70 downloads and no bug reports Hey, do you guys need a cab made for outerdepth's mod to my app ?
Click to expand...
Click to collapse
I made them a .cab file for their app already. Only thing i couldnt seem to do ( and i don't know why) was integrate mortscript into the .cab. I followed your .cab structure for mortscript.exe and it never worked. Hopefully showaco will post my .cab shortly and if you want to you can take a look at see if you can integrate mortscript into somehow.
It's easy really. Mortscript only needs two references in the classes section of the registry to tell windows how to open "mscr" files and of course the mortscript.exe file... copied somewhere on the device. I chose \windows for my cab files
NRGZ28 said:
It's easy really. Mortscript only needs two references in the classes section of the registry to tell windows how to open "mscr" files and of course the mortscript.exe file... copied somewhere on the device. I chose \windows for my cab files
Click to expand...
Click to collapse
see thats weird. i tried that and it didnt seem to work. i added the mortsript reg entries in the HKCR section and everytime in stalled the app and tried to run his weather options.mscr file it said that cannot find file or one of its components.... once i installed the .cab withouth mortscript and installed the mortscript.cab file posted on his thread it worked fine.... weird.
Simply.....Amazing.
anyway to let it auto-disconnect the GPRS after update?
I could make it an option...
what is the 21XX number of the normal clock png icon? i don't have it anymore after doing a series of uninstalls and reinstalls etc.
Hey DUDE!
I am seconding what Showaco said. I really like the way this looks. I am glad you started using the clock panel too. Maybe we can collaborate on some ideas in the future. I sent you a pm last night, so if you didn't check it yet, check it. I hope all is well in Orgville and have a great day, bud.
NRGZ28 said:
Glad you like it. I put a lot of effort into this to make sure it's perfect and so far it looks like there's no issues after 70 downloads and no bug reports Hey, do you guys need a cab made for outerdepth's mod to my app ?
Click to expand...
Click to collapse
23506 BETA Download bottom of this post
This is the new WM6.5 23506 - I'm Starting with a BETA - I need feedback please so I can create a working version... As this is a BETA, there will probably be some issues with it. As always, Back Up Your Data!
Only download and install this version if you like to tinker and deal with possible problems. So far, it's been good, aside from the below issue.
I just had an issue a few moments ago. My phone was off, (So I Thought). It was checking my Gmail account, then went to sleep during the download, then froze while it was off for about 1 hour. It drained about 1/4 of my battery and I had to Soft Reset to get it back. Please beware there MAY be issues, or this could have been one of those rare & wonderful WM glitches that happens occasionally.
I was going to try to fix the problems in the previous 23504 ROM, but I've been using 23506 for a bit today. It seems to be VERY Responsive, Stable, and has Plenty of memory available (Some things seem REALLY Fast). I have cooked a Stock ROM with a couple "SuperSport" mods, (Mostly Visual), and it is looking like 25.76MB Free Ram (20-22 after a few hours) and 67.14MB Free Storage. This is leaving in SkyMarket, Live, Themes, Ringtones, and all the WM Widgets. The only things I removed are AutoUpdate (Does Nothing Anyways), MSTag (Not Compatible with Trinity Camera), and some extra files for other resolutions. Otherwise, as it was made. Oh, I changed some Images for my Theme. I may create a Cab to put all images back to stock if I get time. This will probably be a highly requested option.
Pin Lock appears to work properly now. I know a few of you will like that.
I plan to release the Stock ROM tonight as a BETA so that I can get feedback. My phone's WiFi is still broken, so Please test it, and I'd like feedback on the BT File Transfer. I can see some of the files are there, but don't know if it's working.
I don't have a lot of time to test everything on this, so would appreciate help with that. When I get enough feedback, I'll fix what I can and release a couple flavors of it.
I'm really proud of this one. It's the first one where I did not borrow a completed SYS/XIP from someone else. I assembled this one myself, so everything is as it should be and very clean. Also could be a Train Wreck.
One pet peeve: HoneyComb is Back! Eewww I'll try to figure out how to get rid of that for those who want.
Thanks to everyone for your feedback, good and bad. I'm trying to make our Trinity run a little longer...
PS: Because I have no idea how to move them, I've got 127 Modules in Slot #0 and 254 in Slot #1. Not sure if it would help or hurt to move them as it runs really nice now. Maybe it would be REALLY fast if moved?[/COLOR][/I]"
Each Different Version will be listed with a Download Link for each. In each Download Link I will post the Self Extracting Kitchen, an RUU_Signed.nbh, and an AutoFlash file.
What is AutoFlash you ask? I've taken the RUU file, added the Flashing Program, and Packaged it all up into an AutoExecuting AutoFlashing Program, and, it's a smaller download than the RUU alone. Pretty cool huh? Yes, others have already done this, but I'm going to make it a standard practice from now on.
"AutoFlash (tm), Making Flashing Socially Acceptable, One Package at a Time!"
My recommendation for Flashing is:
Make sure you have Hard SPL on your Phone. I recommend Olipro 1.20 - Click Here for More Info
Be sure your battery is at least 50% full.
Start your phone in Tri Color Screen mode. Steps below
--Unplug your phone from USB
--Hold down the Power & Camera Buttons
--While still holding them down, press the Reset Button using the Stylus
--Release the Reset Button, but continue to hold the Power/Camera buttons until you see the Tri Color Screen
--Plug in the USB cable (if asked about installing a driver, do this), You should see USB in the White Box)
Now you can Flash.
Run the AutoFlash file for the ROM you've selected, or Flash using the Standard Flashing Program included in the Kitchen.
Enjoy!
DOWNLOAD
Thank you to EVERYONE on XDA. Chefs, Programmers, Cookers, Users, Noobs, everyone! You've ALL helped me to be able to do these. I'm sure I'll learn a LOT more as the days go by.
NEW!!! Color Themes!!! In Attachments!!! Also, Enable or Disable Startup Sound
Use these to Change the colors of the Today Screen, Menu Screen, and Dialer. Portrait & Landscape! Grid.zip is two cab files I made that will remove or add the Menu Grid.
Reserved..
Flashing as i post
Edit
Free Storage: 67.17 MB
Free Program: 21.12 MB
Softreset with Pinlock enabled functions again
Hi Supersport,
Just flashed, wifi works fine for me!!!
Do you remember? I had some problem with the 23504 version.
Thanks a lot
Videocall doesn't work :-(
Dear Supersport
Flashed the 23506 and have following observations:
1) PIN lock works
2) WIFI works
3) Communication manager when started from top bar does not start and had to start wifi fro connections.
4) Microsoft My Phone program is old one and have new cab file on my storage card so that I don't have to download again and again.
Will post further feedback tomorrow morning about battery performance and PIN lock problem, if any.
WiFi, Pin Lock
gmlai said:
Videocall doesn't work :-(
Click to expand...
Click to collapse
No, Videocall is something I'll have to add. This is just a Stock Version of the OS that does not include Video Calling. That feature is all but gone on most newer phones, I'm assuming. So, for the Trinity, we add it back in using an old dialer from our original OEM ROMs. This will come later when I get a chance to make different flavors of this ROM.
PS: Glad the WiFi is working for you. I hope it's the same for everyone. 23504 Varied from user to user.
AkshayGenius said:
Dear Supersport
Flashed the 23506 and have following observations:
1) PIN lock works
2) WIFI works
3) Communication manager when started from top bar does not start and had to start wifi fro connections.
4) Microsoft My Phone program is old one and have new cab file on my storage card so that I don't have to download again and again.
Will post further feedback tomorrow morning about battery performance and PIN lock problem, if any.
Click to expand...
Click to collapse
Same thing here. CommManager is not included with the Stock OEM ROM as it is probably different from phone to phone. That will also be added in on future versions.
I'm glad to hear the other two things work.
I'm having a little trouble with my phone hanging during Email stuff. Anybody else experiencing this? Since my Radio is Bunged up, I'm not sure if it's just me...
Anybody get a chance to try BT File Transfer? Is it there or working? EDIT: My initial test tells me this is probably not working...
Does anybody remember how to get rid of the HoneyComb Frames?
SuperSport said:
Does anybody remember how to get rid of the HoneyComb Frames?
Click to expand...
Click to collapse
can this help?
first post
http://forum.xda-developers.com/showthread.php?p=4454239
and here second post one of the Q/A
http://forum.xda-developers.com/showthread.php?t=492532&page=2
_X_ said:
can this help?
first post
http://forum.xda-developers.com/showthread.php?p=4454239
and here second post one of the Q/A
http://forum.xda-developers.com/showthread.php?t=492532&page=2
Click to expand...
Click to collapse
The first one let me know which files I was looking for. Thank You AGAIN _X_! I pulled the cpr files from my 23504 and cabbed them. Now, you can add or remove the Grids per your liking. Just install either Cab and Restart. Now, if I cook without them in the future, you can easily add them back in.
Cabs in First Post. Unfortunately, I ran out of Attachment Slots (Max 8), so I zipped them together as Grid.zip Attached here seperately.
The following is the info/update in the morning:
1) Wifi works like a charm
2) Battery is stable during wifi usage and normal usage and no unusual drainage observed.
3) PIN lock works without any problem.
4) Synch with PC also works smoothly.
5) If there is no communication mamager in this version , then why it is shown when u press top bar phone signal sign? Please look in this as something else may be the reason for communication manager not working.
AkshayGenius said:
The following is the info/update in the morning:
1) Wifi works like a charm
2) Battery is stable during wifi usage and normal usage and no unusual drainage observed.
3) PIN lock works without any problem.
4) Synch with PC also works smoothly.
5) If there is no communication mamager in this version , then why it is shown when u press top bar phone signal sign? Please look in this as something else may be the reason for communication manager not working.
Click to expand...
Click to collapse
Actually, it's not included in the SYS normally. It's usually cooked in later by the chefs. I'm not sure why, as I think I remember it being there in the Older ROMs. It will be fixed on my next release. Yes, the reference is there in the Notifications, but the program itself is not.
I will need to be gone for a good part of the weekend, so I wanted to give you something to play with while I'm gone. I'll probably log in a few times using my phone, but not sure how much I'll be responding.
This is 23506 with some SYS packages removed. I added a few EXT packages to make it easier to work with and help with diagnosing.
Removed:
IE8 - IE6 Still there
LiveSearch
Skybox
Skymarket
WelcomeCenter - Seems there's a problem with this
WindowsLive
WindowsLiveIM
WMMoneyWidget
WMWeatherWidget
WMWidgets
Added:
ArcSoft MMS 5.2.2.37
CommManager 2.9.5.0
eNatives_ShowcaseSuite_1.1.0
FingerKeyboard 2.1
BT Explorer
nueSIPDefault
PHM Regedit
Soft Reset w Modified Icon
Total Commander
My Customized Menu - By using the Cab in a previous post, you can remove the HoneyComb Grid
Have fun, and I hope it runs well for everyone. I haven't had much time to test this one either.
Get it in Post #1 using the DOWNLOAD link. Grab "AutoFlash 23506 Lite w Addons.exe" Should be finished uploading in about 5 Mins
Have a nice weekend
Waiting for the new ROM
_X_ said:
Have a nice weekend
Click to expand...
Click to collapse
Thank you, you guys too. I'm here tonight, so I may be able to answer questions for a while if needed.
AkshayGenius said:
Waiting for the new ROM
Click to expand...
Click to collapse
Sorry, I screwed up the link. It's there now, along with this cab that will give you 4 rows with grid, for anyone who would prefer that (using typhoonk's cpr files I put a quick cab together). I might try editing the cpr files later so the grid is removed with 4 rows, we'll see.
No link for ROM found. Can you chk again.
AkshayGenius said:
No link for ROM found. Can you chk again.
Click to expand...
Click to collapse
Strange. I just looked, and it's there. Maybe try refreshing the page 1st page?
Found ROM now under same download link, which I had missed and am downloading the same. Cannot wait to try it.
Dear Supersport
Flashed AutoFlash 23506 Lite w Addons and looks good. On the outset, PIN lock, wifi is working well. Communication manager also gives confidence that all looks well. MS office alos working smoothly. Will play and post feedback tomorrow. Have a nice weekend.