Develop Bugs

Rom Upgrade, 4gb mem card and HTC S100 bluetooth stereo headset

Hello Guys,
I have a Qtek 9000 with original French Rom : (bought in feb 2006)
ROM 1.13.72 FRE from 10/13/05
radio 1.03.00
protocol 42.36.P8
extROM 1.13.166 FRE
I have been around a lot of threads, but it is hard to follow up on everything
Basically, I wish to upgrade my ROM to a more recent AKU.
What is the latest version developed in French ?
If there is a much better one that appear to be in English, I will take it.
could you then post me both versions and let me know which one should I really chose.
Moreover, I want to buy 4gb mem card, or even 8gb.
I have read about the "cam issue", no big deal
will this new AKU allow my qtek to support the 4gb or even the 8gb ?
is SDHC ok or is there any 4gb SD only ?
Finally, I bought some bluetooth stereo headset HTC S100
they were very promising, but revealed not to be fully compatible with my pda.
the remote control didn't work out, just like the simple listening of media files.
In fact, I was only able to pick up a call, but with bugs when hanging off.
in fact the two required norms (AVRCP and A2DP) are just not supported by the pda (too old... I was told by HTC)
will the new AKU allow it to actually work ?
Thx a lot for the help you can bring me
Pierre

You can start by upgrading your bootloader to 1.01, this will allow you to update with newest roms here..
I think here you can find only english roms, and I recommend you the Crossbow one.
Take a look about the WM6 - 2.00.03 PDAVIET version, is the more stable for me and has good stuff for A2DP purposes.
REMEMBER: You can always fall back to an outdated old rom if you wish, so, don't esitate! But flash it carefully
Nothing to say about SDHC

thx realogic.
if I understand correctly, I need first to upgrade my bootloader - how do I do that ?
then instead of a WM5 AKU (such as 3.5) better to go straight to WM6 (crossbow) - where can I find it and how do I process ?
but more importantly... how do I create a safe backup first ?
thx again

Here the bootloader utility ftp://xda:[email protected]/Universal/Bootloader_Upgrade/JASJAR_BL1.01_RUU_v1.2.exe
Just launch the app and it will upgrade,
for upgrade a rom, normally it comes RARed or zipped, just extract and launch the exe inside, you'll find more help searching on the forum
Here all the WM6 Roms:
* ROM v2.00.02WWE - Midget1990:
http://www.box.net/public/0vjfdb0fvn
* ROM v2.00.02WWE - Helmi:
http://www.box.net/public/zi8kncf5mg
* ROM v2.00.02WWE - Indra:
http://www.megaupload.com/?d=176QIXJM
* ROM v2.00.02PV (WWE) - Tom_codon:
http://www.box.net/public/cbfn87i64h
* ROM v2.00.03PV (WWE) - Tom_codon:
http://www.box.net/public/acznryck8b
* ROM v2.00.04PV (WWE) - TEST:
http://www.box.net/public/6n0xi6yitp
PASSWORD: PDAVIET or PDAVIET2505
I would recommend to use the 2.00.03PV one.
Also, upgrade the radio firmware to 1.14, you'll find searching in the forum
About the backup, I don't remember the names of that kind of app, but i'm sure you'll find some here.. just.. as always.. searching

SDHC dont even think about it.it wont work, sd and sdhc are different- u can use sd in sdhc capable device but not sdhc in sd-device. and as far as i know tere aren't any bigger sd cards than 4gb. (btw. officialy universal supports 2g bmax). and about sdhc dont believe nuclear/infidel (as i remeber he wrote that he runs sdhc in universal-thats crap)

SDHC for Windows Mobile

Hi All,
It is being said that Windows Mobile as of date doesn't support SDHC.
Initially neither XP, Vista or Palm supported it
but now there is proper fix for XP and Vista, alongside there is a trick by which Treo recognizes SDHC.
So i am having it hard to believe that Windows Mobile doesn't have a fix or a trick.
Exeperience with my dell Laptop:
As such it says that as it is old laptop it won't support, and it initially didn't.
Then i stumbled of the XP fix (not officially released yet) my Microsoft for SDHC.
on applying the fix, my card is operating like butter on my dell.
I checked the contents of the fix to find on one '.dl' with some name like 'sd**'. Which leads me to believe it was a driver related fix.
was wondering if there is something being worked out for windows mobile as well (officially or unooficially).
thanks

RE
Are you saying that after aplying the fix to your Win XP your card reader/writer is now able to recognise SDHC card?
BTW, do you require a SDHC card reader/writer or just a simple SD card reader/writer will do the job?
Is the card reader/writer built-in to your DELL or is it an external card USB reader/writer?
What capacity SDHC card are you referring to? 8GB?
Where do you get the fix? Could you post a link?
Thanks

I bought a microSDHC™ 4GB (Sandisk) and it run perfectly with Windows Mobile 6 SE EC 5.2.1238 (Build 17745.0.2.3) on my HTC TyTN (Hermes).

Hi FOSA,
Are you saying that after aplying the fix to your Win XP your card reader/writer is now able to recognise SDHC card?
Yes exactly.
BTW, do you require a SDHC card reader/writer or just a simple SD card reader/writer will do the job?
It's a simple Dell Inspiron 630m inbuilt SD Card reader.
Is the card reader/writer built-in to your DELL or is it an external card USB reader/writer?
Built-In
What capacity SDHC card are you referring to? 8GB?
4GB i have but the fix will also work for 8GB
Where do you get the fix? Could you post a link?
http://support.microsoft.com/kb/923293 - Description of the fix KB923293
http://thehotfixshare.net/download/index.php?dir=English/Windows XP/ - Location of the fix to download - just search for 923293, alternatively you can call microsoft and get it deirectly from them (as mentioned in description page).
Thanks[/QUOTE]

correction
The above fix is for 4GB SDHC only.
for more than 4GB SDHC use the below fix. : KB934428
cheers
And there is a similar fix for Windows CE as well in the April 2007 CE5.0 update- refer Microsoft's website.
only one missing is Windows Mobile.

SDHC update for Windows CE 5.0 is here:
http://support.microsoft.com/kb/933809
but how to download and build it ?

Ant-125,
I reckon CE 5.0 is not same a windows Mobile 5.0.
what we need here is the fix/driver for wm 5.0/6.0

topgunarindam,
Thanks so much for your info.
I got a new laptop with built-in SD Card Reader. I installed both Windows XP and Windows Vista (dual-boot).
In WIndows Vista, it can read my 4GB Transend SD Card, which I use with my PPC. But in Windows XP, it always prompt me to reformat the card and cannot read it.
If I plug in a USD card reader, then it can read my 4GB card, just fine.
I have tried to find updated driver for the built in SD reader but found none.
After reading your post just now, I simply tried it, and guess what, it works.
Now the SD Card reader reads my 4GB SD Card perfectly and I do not need to carry the USB reader anymore.
My 4GB card is not SDHC, but this hotfix takes care of it as well. =)
Thanks again.

If this works on regular, piss old card readers, we've just caught the SDHC alliance red-handed for misleading consumers. Even if the SDHC alliance is right, tho, full 4GB support (instead of dodgy or spotty ones) is a nice addition to anything...

sandisk 4g sdhc
I just recieve my 4gb sandisk sdhc card but windows vista doesnt recognise it, it just doesnt detect anything.]
Any help please. i tried downloading the fix but it says i dont need it.

Does that particular Sandisk card come with its own reader?
And you can't use XP patches on Vista. Vista has its own set of SD-card patches...
http://www.softwarepatch.com/windows-vista/windows-vista-sd-error-patch.html

You guys are talking about XP/Vista.
What about a solution for WM6 (CE5.2)?

marcDVDer said:
You guys are talking about XP/Vista.
What about a solution for WM6 (CE5.2)?
Click to expand...
Click to collapse
WM6 since aku 0.2 have added native SDHC support. But OEM has to make some minor modifications in drivers.

so is my WM6 5.2.1413 compitable with SDHC without any mods?

SDHC
Hi all,
Laurentius and I will be releasing a new WM6 Rom, either over the weekend or early next week which will incorporate Mamaich's wonderful work on the SDHC drivers amongst other wonderfull features.
Cheers,
Beast

That will be a a big step forward... thanks in advance

Hi @all,
what about a simple fix which doesn't require flashing the whole device...mine is just working so fine right now...

MPW said:
Hi @all,
what about a simple fix which doesn't require flashing the whole device...mine is just working so fine right now...
Click to expand...
Click to collapse
Please read post 148 on this link:
http://forum.xda-developers.com/showthread.php?t=325466&page=15
The cab really works. It has been tested on 8 GB SDHC cards.

Answer to all of your questions
please see the following link, new rom has been released with built in HCSD card support and it works like charm, i am using 8GB card with out any problems
http://forum.xda-developers.com/showthread.php?t=325466

Hi,
thanks so far. I would like to have first the fix for WinXP. But on that Microsoft support page (link above), there is no download link? Do I really got to write an email to them? Might someone post the fix for WinXP aswell here?
Would be cool, because my laptop will maybe be able to read the 4 GB nonSDHC from my Universal aswell....
Thanks so far,
MPW
/edit: Would that Card
http://www.amazon.de/PNY-Digital-Ca...0RM19DS/ref=pd_sbs__1_img/302-4311476-1380818
run in my Universal? It's german, so gonna translate:
technial details:
new standard 2.0, Class 4
only for Devices with SDHC-reader, not usable in nonSDHC devices
Will it run in my Universal with the CAB and WM5 Aku 3.3
Thanks

6 GB SDHC Card

hi,
i got a 6 gb sdhc card for my htc p3300 and i want to use it but my windows mobile 6 wont accept it i got a Artemis touch 2.1 WWE rom on it
please have some body an firmware update or a dll/cab/reg fix ???
greats antonius

As far a I know sdhc memory cards are not suported on the artemis.
It just doesnt have the hardware to support it...
Check out http://forum.xda-developers.com/showthread.php?t=311839
The Heed

i read that there is a driver fix !
i read that if you donwload this driver SDIO Hx version 1.1 then it works.
as any one has this driver for me????

http://forum.xda-developers.com/showpost.php?p=1534542&postcount=69
Either HTC wants to say that they support non-SDHC 4 GB cards which probably should work anyways or that they are going to support SDHC in the official release.
I've read many discussions on that SDHC and that it is only a software problem on the Artemis and that someone from this community got sdhc working on a HTC device which did not natively supports it.

e-mail to HTC
Good Morning Customer, Thank you for contacting HTC Europe.? There will be an updated ROM for your device soon but we can not give you a specific time on this.? We can only guarantee a 2GB card working on your device and can't guarantee the 6GB working, even with the ROM update.

I do not understand how is it possible that noone knows whats exactly the difference between SD and SDHC.
there are so many discussion on this topic, and no definite answer.

Trust they do...
drkbg said:
I do not understand how is it possible that noone knows whats exactly the difference between SD and SDHC.
there are so many discussion on this topic, and no definite answer.
Click to expand...
Click to collapse
I want to believe its like the difference between a cat and a cattle, firstly obviously in the name and also possibly in the compression and algorithms employed.

but still there should be some kind of RFC it's not secret stealth technology... but I can't find anything in the "internets" SDHC is like a myth... people know that it's out there but cannot explain how it happens...

Sdhc Working In A Touch!!
My friend at work has just bought the touch on t-mobile and managed to get a free 4GB SDHC card with it, Il take a photo to prove it so I cant see how its working in Touch and not our devices....

mavisdavis said:
My friend at work has just bought the touch on t-mobile and managed to get a free 4GB SDHC card with it, Il take a photo to prove it so I cant see how its working in Touch and not our devices....
Click to expand...
Click to collapse
Different hardware and different drivers. No mystery to it!

Yep - absolutely right - no mystery to it. In fact, SDHC is a published standard.
It is different from SD in that it uses block mode addressing instead of byte mode addressing, so unless the firmware in the device controller is designed to support botht byte and block mode addressing, it won't work.
The SD card controllers in some devices have been designed to support both types of addressing and some haven't, because they were designed before the new standard was published.
The Artemis/P3300/Orbit was not designed to support block mode addressing within the firmware, so until either HTC or someone else very clever provides an update to the SD card device controller that provides block mode addressing, the SDHC cards won't be recognised in the SD card drive...

rickgillyon said:
Different hardware and different drivers. No mystery to it!
Click to expand...
Click to collapse
thats it, different hardware wont be same at all bro,.

Hey, for more than 4gb sdhc you need sdbus.dll and sdmemory.dll from a device with wm6 aku 0.3.1+ (build 17944 or higher) and update os to 17944 or higher, no other way

sp3dev said:
Hey, for more than 4gb sdhc you need sdbus.dll and sdmemory.dll from a device with wm6 aku 0.3.1+ (build 17944 or higher) and update os to 17944 or higher, no other way
Click to expand...
Click to collapse
have you checked that just by replacing these .dll-s it will work?

If you have os rom higher than 17944, you should only update these 2 files - tested on loox 560

Could you post the 2 dll and I'll give it a try.

http://rapidshare.com/files/59328091/sd.7z.html
here you go - copy 2 dll to \windows and install certs.cab

Thanks for that, unfortunately it didn't work.

Just double checking but the files you mentioned earlier were sdbus.dll and sdmemory.dll , but the zip file contained sdmemory.dll and signer.dll. Did you mean to send these, or am I missing something?
Thanks

jupp, sending the right sdbus.dll - file would be great!

info patch sdhc for universal (qtek 9000)

hi to everybody and you excuse my non perfect nglese.
I would want to ask a favor.
it would serve me the patch for the cards of memory sdhc for my universal (alias qtek 9000).am I more than one of it by chance?
would you send me the correct file for my universal?I have seen that I am a pò and not sò of it which to use.(or you write the link.).thanks to everybody
I forgot, I use mobile windows 5

This is the cab.
Testet on HTC Universal with WM5 and WM6, Fujitsu-Siemens PoketLoxx N560 with WM5 and Sprint IP-w830 with WM5.
It is testet with a 16G SDHC card.
Have fun.

sdhc problem
Hello this site is fantastic! Are hours that I have lost my updating qtek 9000!
THANKS TO ALL YOU!
But by neophyte I have a problem: I have a Scan Disk Ultra 4gb sdhc I downloaded your file sdhc.cab but I really do not know what to do now!
Please help me
You are great

put the cab on ya device (microsoft active sync) then run it from the
file explorer

YOU are FANTASTIC!
Another fast question: where to put the file pbar15.exe?
Thank you and good evening to all

problem 4bg not 8
hi, I have a problem.I have installed sdhc.cab, but my universal reads 4 gb instead the memory it is from 8.

hi, please help me i have a memory card A-Data turbo sdhc 8 Gb for my i-mate with wm 5, i have download sdhc.cab, but now i read only 3 Gb, how I can make in order to resolve the problem? thank for answers me .....

hi there, what you need is SDHC777.cab also known as sdhcv2. here is a link to it but i think its been renamed
http://forum.xda-developers.com/attachment.php?attachmentid=72806&d=1204022607
try it worked for me

problem 8 gb universal
hi, unfortunately, not function with wm5 aku 2.
I have tried her all but not và, at times it goes out me "any installed card."
the connection fà to unload sdhc.cab and he/she reads me the memory from 3.5gb instead of 8

thanks very much, i think that i change WM5 in WM6, please can you give a link where download WM6 version italiana???

You are OFF TOPIC here.
However, you can try here

highc said:
This is the cab.
Testet on HTC Universal with WM5 and WM6, Fujitsu-Siemens PoketLoxx N560 with WM5 and Sprint IP-w830 with WM5.
It is testet with a 16G SDHC card.
Have fun.
Click to expand...
Click to collapse
thanks dude!!
workin

Hi...
Tried them both... and no one is working =S
Only recognizes 3476 MB of my 8GB Sandisk MicroSDHC
Could u help me?
I'm using a Qtek 9000 with WM 5.0.

info need rom with video call e sdhc 8 gb support

hi to everybody.could someone suggest me a rom where you work is the video called and is the support to the cards sdhc from 8 gb?
it serves me a rom that the video does called and that the sdhc accepts from 8 gb.also wm5

if you use WM6.1 you have fully functional SDHC no videocall. If you use WM6 later versions then you have the same with a SDHC.cab. Early
WM6 = 4GB Max with SDHC no Videocall.
WM5 4GB Max unpatched SDHC. Card can shut down so needs to be reinseted if it does. Videocall works.
Using patched SDHC on WM5 Means full SDHC support but no wifi and broken GPRS.
Sorry. What you ask for is simply unavailable.
Psi

Hey, PsiDOC.
What about this one by Laurentius? http://forum.xda-developers.com/showthread.php?t=325466
This fw is supposed to have VC in it. What's your thoughts on it?

That's about the closest to VC you will get on WM6 at this time. VC out only no incoming.
Patched SDHC.cab should work for larger than 4GB but you may lose WIFI.
Psi

Here you go :
http://forum.xda-developers.com/showthread.php?t=376771

info guide to convert 8 gb in two fron 4 gb
hi, excuse my English.
could you explain me as you have served the card to partition as 8 jig in 2 from 4?
could you explain me the passages footstep-footstep, one after the other?
how have you succeeded there and that programs you have used?would you make me a small guide?me there stò trying but I don't succeed there