Related
Now that the official WM6 upgrade has been released for the D810, does anyone have any updated information as to whether it will be released for the P3600 and if so, what time frame?
I don't believe HTC has agreed to release it. Why don't you just flash hard-spl and a nospl version of it posted here?
Shadowmite said:
I don't believe HTC has agreed to release it. Why don't you just flash hard-spl and a nospl version of it posted here?
Click to expand...
Click to collapse
I'm just being cautious. I'm on T-Mobile USA and developed SMS sending problems with the official WWE GPS upgrade, so I'm now hesitant to try a ROM not intended for my P3600. Perhaps if someone on T-Mobile USA has successfully used the D810 WM6 ROM, I'd be willing to take a chance. I sure would like HTML capable email!
Their excuse...
Hello Sir,
The network partner from HTC did not request the upgrade for the Windows mobile 6 for the P3600, that's why unfortunately the HTC P3600 will not have this upgrade.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
**** ********
HTC Europe
[email protected]
http://www.htc.com
Click to expand...
Click to collapse
that's what HTC europe said me today.
Hello Sir,
Unfortunately HTC Europe will not release Windows mobile 6.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Lena
HTC Europe
PGMMA said:
I'm just being cautious. I'm on T-Mobile USA and developed SMS sending problems with the official WWE GPS upgrade, so I'm now hesitant to try a ROM not intended for my P3600. Perhaps if someone on T-Mobile USA has successfully used the D810 WM6 ROM, I'd be willing to take a chance. I sure would like HTML capable email!
Click to expand...
Click to collapse
You just need a setup cab file for t-mobile's settings here in the US. I'm on cingular so I don't have one off hand, but let me search for ya...
http://forum.xda-developers.com/attachment.php?attachmentid=42298&d=1182761296
I think that's what you'll need... And of course you can always flash back to your original wm5 rom if needed...
Shadowmite said:
You just need a setup cab file for t-mobile's settings here in the US. I'm on cingular so I don't have one off hand, but let me search for ya...
http://forum.xda-developers.com/attachment.php?attachmentid=42298&d=1182761296
I think that's what you'll need... And of course you can always flash back to your original wm5 rom if needed...
Click to expand...
Click to collapse
Thank you, but all the settings are correct and everthing else (MMS, EMail, Internet, etc) works. The only setting I've found for SMS is the Service Center Number and that's correct. Receiving SMS works and sending works from some some areas - just not where I live.
So installing hard SPL and then flashing the non SPL ROM is all that's required to update to the D810 WM6 upgrade?
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Shadowmite said:
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Click to expand...
Click to collapse
I appreciate it. Maybe by then I'll have the nerve to try the upgrade.
Shadowmite said:
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Click to expand...
Click to collapse
Thank you, that would be nice for all those P3600 owners that are getting into flashing trouble.
Any news?
Did anyone make a safe WM6 upgrade for p3600 yet?
read the posts! there are many wm6 roms overhere.
Hi Folks,
does some one know what scahps offical Home Page?
Cheers,
Didn't know he had an official site. Ever thought of asking him?
nivraz00 said:
Hi Folks,
does some one know what scahps offical Home Page?
Cheers,
Click to expand...
Click to collapse
Here; http://shaps.ceggy.com/
Judging by his website, the up and coming 6.1 ROM will be rather interesting. Can't wait!!
Learn something new everyday. Didn't know he had a site either. Thanks,
Schaps official site
This is the Schaps site
Cheers RanDomIze, was posted ealier in thread. Just checking your own ROM site now. That many ROMs out there, hard to judge which to use
I Would Like Some Body Tell Me Wich Steps I Had To Take To Upgrade My Hermes From Wm5 To Wm6.
P.s.: I Had All The Programs I Could Need, But I Don't Know If I Could Intall Hard Spl, Radio, And Run Sim Cid Program And Wm6 Directly From My Microsd Or I Had To Sync The Hermes With The Pc.
-------------
HTC Hermes 'herm100' + 1g Sandisk
ROM VERSION: 1.34.502.1
ROM DATE: 09/21/06
RADIO VERSION: 1.16.00.00
PROTOCOL VERSION: 32.53.7018.01H
WM5 OS 5.1.195 (BUILD 14955.2.3.0)
radames said:
I Would Like Some Body Tell Me Wich Steps I Had To Take To Upgrade My Hermes From Wm5 To Wm6.
P.s.: I Had All The Programs I Could Need, But I Don't Know If I Could Intall Hard Spl, Radio, And Run Sim Cid Program And Wm6 Directly From My Microsd Or I Had To Sync The Hermes With The Pc.
Click to expand...
Click to collapse
First you need know your device, so go to the wiki
Then my advice is install Hard-SPL you k see in the Hard-SPL Thread
Then to flash you need the Rom and read this Tutorial Flashing WM6 ROMs
thanks i will read it
i could do it with data cable or i need another cable to do it
thanks again for the help
I didn't think that the site posted up is Schaps own.
Have got a niggling feeling that this site was set up by someone else to ease the difficulty some people were having with accessing/downloading from megashare and rapidload.
WB
I think you are right.
If it was Schap's then his name in the title should be correct and not shap's , IMHO.
yeh, he has no web site in his signature...you would think he would advertize it if it was official.
Now that you mention it, I think you're right. Doesn't look like a website created by schaps, bit to boring if you ask me, plus you'd think he could spell his own name
Fallen Spartan said:
Now that you mention it, I think you're right. Doesn't look like a website created by schaps, bit to boring if you ask me, plus you'd think he could spell his own name
Click to expand...
Click to collapse
Noticed that too. The good thing is, the donate information is the same as in Schap's signature, so while it may be a knockoff, the webmaster definitely has his/her heart in the right place...
yeah, I've donated to schaps through this site, and he definately got it. Need to keep rewarding the guy for all his hard work!!
Hi everyone!
Here's the deal! I'm no noob to flashing, cooking and HardSPL as I'm positive there are plenty of users who are swimming in the same pool.
Moving from another device's forum (Trinity) to the Diamond forum is quite a shock. So many posts, so many threads.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
For instance:
I'm running an old version of Radio and Official Diamond ROM (Stock), 1.00.25.03 Radio and 1.37.479.3 WWE ROM.
Bootloader version is:
Code:
DIAM100 64M
SPL-1.37.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I'd like to first upgrade to another Official ROM, like RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1.
No info on following:
- changing an original to another original ROM: is there need for HardSPL?
- changing a supposed EU original to an Asia original ROM: is there need for HardSPL?
- if there is need for it when upgradin ROM, which one to choose based on bootloader info?
- if there is need for it when upgradin Radio, which one to choose based on bootloader info?
etc.
I can live with my new device with stock ROM, I can tweak it, no problem.
But it is my strong belief that a detailed tutorial/description/info/guide thread could get a nice sticky.
Something that would make new users like:
"Oh, I just bought a Diamond, I read this sticky, compared my bootloader info with the ones stated in the thread, checked my ROM and Radio, checked my new ROM and Radio which I want to flash, so I need this/I don't need any HardSPL and it worked"
Yes, call it spoon-feeding, but while looking at the Forums and reading and searching, there's so much clutter some can't even find the Search button!
My two cents!
I totally agree !!! We are needing that "tutorial for dummies"
Im new to the Diamond forum too, had a tytn for ages though.
I found everything i needed to know on the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
geistteufel said:
Here my tuto (french version, could use a translator like google to push it in english) : http://celogeek.free.fr/2008/08/htc-diamond-rom-cuisinee-diamond-project-32/
Try it Hope can help
Click to expand...
Click to collapse
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
tnyynt said:
Yes, but still, is there any need for HardSPL when flashing to another Official HTC ROM? And is there any need for HardSPL when flashing to another issuer of the Official HTC ROM (from EU to Asia HK)?
Click to expand...
Click to collapse
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
andy2111 said:
You don't need HardSPL to flash an official ROM. If you want to be really sure then simply go to the HTC site (I used HTC Europe), register as a user, input your phone's serial number and it should tell you that you can download the 1.93 ROM. This way you can do a 100% official upgrade before deciding if you want to use a cooked ROM.
http://www.htc.com/member/login.aspx
Hope this helps
Click to expand...
Click to collapse
I know that, remember, I'm not a n00b.
First, I have no updates in my registered Diamond e-Club account.
Second, this is what I am talking about: You said:
You don't need HardSPL to flash an official ROM.
Click to expand...
Click to collapse
Other peoples opinion:
omaga said:
You need hardspl on every one, and all are offcial roms as they were downloaded
only the rom you can download from your own HTC e-club site dont need hardspl.
Click to expand...
Click to collapse
Contradictory information?
Now since I don't have any updates in my own e-Club, there's the HardSPL option with other (even Official) ROMs.
Question is: which one? (1.23, 1.24, 1.34, Developer edition, Hard-SPL-Diamond-OliNex, HardSPL_OliNex138_Signed or RUU_Signed_1_93OliNex_HSPL_UnsignedEdition).
This is crazy!
Maybe that's the difference then - perhaps ROM downloads via the e-club are treated differently, although I can't think how.
Seems that Cmonex and Olipro are the SPL experts here (I'm sure you've already seen this http://forum.xda-developers.com/showthread.php?t=400402) so maybe they're the best ones to help.
If it helps I updated to HardSLP 1.4 and ran quite happily on my stock ROM before upgrading to Dutty's ROM. I guess it's down to how adventurous/risky you want to be.
Good luck.
1. look at the next posts, i blew it on this answer..
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
here, an answer from THE expert:
http://forum.xda-developers.com/showpost.php?p=2484533&postcount=143
2. if i convinced you to hardspl then go to the unsigned version:
http://forum.xda-developers.com/showthread.php?t=400950.
i am using it from the beginning (2 month at least) and i flashed my diamond 4 times without any problem at all.
3.
There are so many HardSPLs. OK, no problem! But what I DO miss is a tutorial thread with nice and clear descriptions stating for instance "You will need this HardSPL for this ROM", ""You will need this HardSPL for Official ROM", "You don't need any HardSPL for Official ROM", etc.
Click to expand...
Click to collapse
already there, in almost each ROM thread.
i think all cooks start their thread with the warning (hardspl first!) and a link to the recommended hardspl.
bepe is "all signed" so he never mention which hardspl.
others, for example:
dutty's choice of hardspl: http://forum.xda-developers.com/showthread.php?t=408621
[WM 6.1] NEW SWIFTBL WWE DIAMOND ROM V5.0 - CE OS 5.2.20273 (BUILD 20273 AKU 1.3.3)
http://forum.xda-developers.com/showpost.php?p=2312249&postcount=2 or http://forum.xda-developers.com/showpost.php?p=2412201&postcount=1first
DIAMOND PROJECT ROM Release V3.2 [WWE/GER/ITA/FRE/RUS/ESN]
http://forum.xda-developers.com/showthread.php?t=408621
i wonder what happened to you.... learn from post #3!! you are a ROM cook...you are the "uber" user! we should ask you questions
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
vrstu said:
I know you say if you flash an official (uncooked) ROM to your handset then you don't need SPL however I have a Vodafone branded Diamond which won't allow you to flash a non Vodafone branded ROM so I am ssuming that you still need to use SPL to go to an unbranded ROM even if it is generic HTC.
Click to expand...
Click to collapse
i think you are right. never thought at this scenario.....
usually i don't buy my pda branded. no plan, no 3 years, free as a bird!
thanks for bringing it to my attention.
yeah, hard-spl to allow you to flash ROMs from other regions..
technically you shouldn't need it to 'protect' your device since its an official ROM upgrade, but then again you're trying to flash an upgrade that's not from your region so not too sure how that affects your warranty.. i would stick with hard-spl no matter what.
Although you may experience better results with certain ROMs using a certain SPL (this hasn't been clearly shown on the diamond to my knowledge) seems like the SPL is more tied to your hardware (why certain people get screen flicker and fuzzy fonts after flashing.. wrong SPL). so it stands to reason if your hardware doesn't change, you *shouldn't* have to change your SPL just cause you're flashing a new ROM
KukurikU said:
1. you don't need hardspl when you want to flash an official ROM.
if you should need one then HTC should release it with the ROM. no such thing!
HTC release official ROM "like it is" for all ppl even for the ones that never heard of hardspl. simple logic.
if you buy it branded look at the next two posts!
i like my diamond with hardspl and unlocked (using the developers, unsigned hardspl). i advice you to do the same. this covers all, signed, unsigned and official ROMs.
Click to expand...
Click to collapse
I have experince now with 3 HTC devices: 1. i had Trinity with wwe rom when i bought it-> try to put it to my language (Finnish ROM) didnt work, used hardspl-> it worked
2. Polaris with wwe 6.0 rom, tried to update to the latest wm6.0 rom which was a rom from Singapore, no succes-> put hardspl in device->it worked
3. In my Diamond i put hardspl right away(after 2 hour use), so that one i didnt test at all, based on my previous experience I didnt even try to flash the official 1.93 rom witout hardspl
So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience
[/QUOTE]So at least my concution is that u must have hardspl even when you want to flash a official rom from another region. Dont offcourse no if that is a fact, just what i have experience[/QUOTE]
From my experience from the diamond, you have to flash hardspl onto your handset before you can use 'other region' roms even when it is 'official'.
I have a HK WWE handset and tried to flash my rom with the first upgrade rom from SEA, and it wouldnt flash. it would say my handset is not from the correct region.
i flashed a hard spl afterwards and it worked.
So from pak1234 experience we can make some conclusion? its the same experience I got with Polaris and Trinity
Noob Agony
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
bluntyeyedfool said:
Hi,
As a total recent Noob (TRN), I spent about 2 working days trying to find out where to start. In particular, the definition of HardSPL, ROM and Radio.
It was very difficult to ramp up to speed. you guys rock, seriously, but your community can thrive if you lower the gate a bit. Think about all the time you'll save in the long run by giving noobs somewhere to start. 'There are no stupid questions, only arrogant responses'. -- I read that somewhere here.
For anyone who enjoys noob-razing, come visit me and I'll stick you in with my horses. Get some payback.
A Where-To-Start sticky would help enormously.
peace.
PS - Eventually I found www.modmydiamond.info and started reading. I nearly cried when my Swiss language-locked Diamond started talking in good auld English.
Click to expand...
Click to collapse
congrats on yr first successfull step (english language on yr swiss locked diamond)! perseverance and good reading skills pay back.
welcome to our forum!
from yr post i can understand that you started as an intelligent user/member of this forum (as opposed to noob) by using this forum accordingly with it's rules.
there are stupid questions. if one of the next is called by somebody "arrogant response" then he'll have to adjust or just grow elephant skin (i can name a few that already did):
1. "search, this was already posted". (most used)
2. "read the manual." (almost an insult)
3. "read wiki." (friendly, useful advice)
4. "most of the polls are useless." (no comment necessary)
5. "comparisons between any other ppc and diamond does not belong here, this a diamond only forum." (sadly not enough enforced)
a noob is not somebody with a low count of posts. a noob is somebody with a noobish attitude (total disregard of the forum's rules and it's members, wanting everything now, ready, chewed and put in his mouth).
respect the forum and it's members and you'll get respect and help beyond yr wildest dreams.
yr PS only confirm all from the above.
i prefer not to comment yr horses-payback threat
noob here
Hello all, noob here, just got my diamond via vodafone NL.
The device is sim locked contrary to what the agreement with was.
The current rom running on it makes this device incredibly slow, my brother has an p3300 which works way faster than my diamond (but does not look so nice).
This made me start looking for a solution. I've been reading this site for three full days and I'm still very confused, everything and it's contrary is written here, how is one supposed to draw a conclusion?
With that said I would like to see a well written tutorial in plain english and that does not assume the reader is a techie.
It should explain:
- How to backup the original ROM and hardSPL
- How to flash a new rom and avoid issues with screen flickering and so on
- How to restore the original ROM and hardSPL in case the device needs to be send back for repair
- Clarify what to do with radio roms
- How to unlock a device to be used with any sim card (ok this already exists, i've seen the sticky)
Thanks
One more question to be added
- Why would you need a CID and security unlocker?
I thought it was just another name for sim card lock but apparently not.
tnyynt said:
I have no updates in my registered Diamond e-Club account
Click to expand...
Click to collapse
You should go to Support section of their site, that is where they post ROM updates apparently. e-Club has only ringtones.
hi there, i hv a problem here,i hv flash my dopod838 pro to manila 2d which i found in this forum,after flash it,my device also hang and when i do a soft reset,it hang at boot screen and cant enter windows..i wondering what problem with my device.....can some body gv me idea regarding my dopod?relly blur and no idea about it...........
Hi! Have you tried flashing original carrier ROM & then flashing the ROM of your choice??
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
HI!
Please check this link out I am sure it you will get enough info about upgrading your Dopod 838 pro!
Best of Luck!
ultramag69 said:
I hope you had Hard SPL installed.
Do a search to see if you can find your carriers WM06 rom, it doesn't need to be WM05. Search is your friend here.
Click to expand...
Click to collapse
yes i have hardspl installed,my spl ver is 2.10.olipro,but still like that
kahwah said:
original carrier rom?i think i didnt do that....where i can get this original rom?is it we must flash to wm5 1st then upgrade to wm6?thanks
Click to expand...
Click to collapse
Hi!
You can get original carrier shipped WM6 rom for your mobile here!
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
kahwah said:
thanks hemendra05!!1 more thing i want to ask,what is radio rom?what is the diffrence flashing radio rom and other ordinary rom?thanks
Click to expand...
Click to collapse
Hi!
The radio ROM provides improvements on the GSM radio stack and this has effect on the GSM signal, AT command interface, GSM data modem (3G, GPRS, EDGE, HSDPA, etc...) functionality that is controlled by the Radio Interface Layer (RIL)
Please go trough this page you have plenty of information related to all Hermes related queries one may have.. Hope it will be useful for you
Just remember though that if something stuffs up while flashing the radio rom, you are pretty much gonna end up with a brick... You may be able to use the PDA functions but phone will be gone forever...
same problem
I have a dopod 838 pro. Hardspl by olipro. Flashed roms with manilla 2d and right now suffering the same problem like kahwah..
Tried already the method of flashing original rom then to the cooked rom but still the same problem persist.
Can someone give me an idea on what to do next..
Seriously guys, both of you, READ the Hermes Wiki and the Noob section, they are set as stickies at the top of the thread. I mean, come on, you have not even posted 7 posts on XDA-DEVs and you already are close to bricking your phone.
READ the Wiki first!
hi guys
as you can see im a total noob to the forums and to updating ROMs on the diamond
my htc diamond is running rom version
version: 1.37.707.1 WWE
date: 06/10/08
radio version: 1.00.25.03
protocol version: 52.26a.25.09H
i find that phone lags a bit and slows down especially when im unlocking with my password.
it also lags a bit when im activating the keyboard to write a sms..
so i guess i was hoping somebody could guide me in the right direction to get the latest rom update, and how do i do it.
i can see there are some custom roms around...so i have no idea whats the best way to proceed..
ive tried to download the latest rom update from the HTC site but it says that my device is not supported?
i dunno, cause i entered in the serial number located under the battery...
so im hoping somebody here can help me out..
thanks!
subs.
More info...
What's your diamond model number? It's under the battery.
You should look into HardSPL and then check out the official ROM's and Cooked ROM's and make a decision on which one you want to flash your phone with. Read the forum's and how-to's for more info...but first you should work out what version of the diamond you have before you go looking for ROM's...also, always HardSPL before you flash!
Good luck.
under the battery it says
HTC P3700 DIAM100
is that what you are referring to?
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
cobbs said:
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
Click to expand...
Click to collapse
yeah, ive been reading that and im slowly starting to understand what i have to do...
i would like to do this rom update on my phone
http://forum.xda-developers.com/showthread.php?t=423418
so from what i understand i first have to install a unsigned hardspl, any recommendations on which version i should use?
1.23
1.24 or
1.34 ?
i was going to use 1.24 only because i saw somebody post saying they used it and had no problems, but if i should use one of the other ones because it will work better then please let me know.
after doing the hardspl install i was going to backup all my contacts and then do the rom update.
am i missing any steps?
do i have to do a radio update before a rom update?
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Prewien said:
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Click to expand...
Click to collapse
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Substance001 said:
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Click to expand...
Click to collapse
Install hardspl 1.40 or 1.93 (I use 1.93, but didn't have problems in the short time I used 1.40) hardspl and then install any rom you like. Just try to read as much as you can because chances are, any question you have, someone else has had it and it's on the board for you to read.
ok cool, i will install hardspl 1.40 and then that rom i mentioned
at the moment i dont have any questions, i will follow that thread that explains how to update roms and hope for the best
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Substance001 said:
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Click to expand...
Click to collapse
if you brick your phone, the only option left is to claim warranty.
And i believe the only step that could possibly brick your phone is flashing HardSPL, right guys?
I was in the same state of anxiety when I did my first ROM flashing. Thankfully it all went smoothly.
My 2 cents :
1, Think about what you are gaining by a ROM upgrade. If your phone is working well out of the box and your routine functions are satisfied, you are well off with you stock ROM. I flashed a couple of ROMs and now I am with my stock and I am perfectly fine.
2, Read this -> http://forum.xda-developers.com/showthread.php?t=416211 and this -> http://www.modmydiamond.info/ And if you understand every single letter of it only proceed.
Happy flashing
i have a diam100. can i flash it to a WWE dutty rom?
thanks for all the help guys, but i decided to flash my htc with the original rom from the htc site.
for the moment it runs like a dream and has fixed all my lag issues.
so im gonna stick with that....for the moment
It's important that you feel comfortable crossing over......but I have to say, when you decide to cross, it's an exhilarating feeling to know that you can select what ever Rom from, what I think are, top notch chiefs here but also the fun continues by selecting which ever Radio.
Many post on here that say, "I bricked my phone," truly didn't brick anything. They just hit a wall so they panic. Hard SPL really does a good job. So the chances of your bricking this device is not as high as some people think..