Related
My DOPD - bought in China was running a chinese version of WM5.0 and I wanted to install a english version.
After upgrading my DOPOD 900 with the upgrade : Universal_Upgrade_v1.30.68_radio_1.09.0.zip I have problem.
It is really DEAD. soft reset does nothing and a hard reset only gives the option of "0" and "X" which do nothing.
the USB is no longer recognised and nothing seems to want to communicate with the Dopod. It seems the USB loader program is no longer running on the Dopod.
Has anybody any idea how I can attach to the device an install a new bootloader, or something.
I had the same issue and I have a solution. But, let me tell you my process that got me where you are.
I tried performing the update using the No_ID (or whatever) method and kept getting errors. I rebooted my PC and changed the Operator ID using the HTC64 Extended ROM Tool.
After this, I was able to use the typical installer. The flash went fine and I hard reset as instructed. From that point on, I had your exact problem.
A dead screen. I was able to redo the hard reset after pulling the battery but I would just end up with the dead (blank) screen again. ONCE, I did get it into boot loader mode where I could actually read the screen. But, of course I reset and again had a dead screen.
My solution was to revert back to a true O2 ROM. Even though I couldn't see the screen (still can't), the ROM update is proceeding as I type this. I'm at 44% of the radio ROM installed.
Hope this gives you hope!
Well, good news. I just finished the ROM update and I'm looking at the O2 boot image.
Is there any indication that the QTek ROM looks for the Carrier info to be QTek or it will fail once installed? Just wondering why I had this problem.
ARG! Reflashing with QTek ROM did the same thing. :evil:
Blank screen and all.
check 2 things
uncheck usb from active sync
hardreset after upgrade has been completed
just do the upgrade again and it should come alive again
Thanks and another question
Well thanks for the hope. but I have tried this already with no luck, however after this message I will try again. My biggest problem is that I cant regain communication over the usb.
I would like to know how your system behaved when you plugged in your apparantely dead device. My system just says device un recognised and I cant begin a download with or without active sync.
So I cant get another rom image to download.
regards
Nick
dolebole said:
check 2 things
uncheck usb from active sync
hardreset after upgrade has been completed
just do the upgrade again and it should come alive again
Click to expand...
Click to collapse
This was the first thing I did.
The problem is that I cannot get any communication over the USB.
The device is unrecognised on USB and after starting any ROM download it just timesout after "checking information from device" message .
Ever seen a dead USB interface like this ?
The USB PnP mgr sees the hardware but cannot establish the device type !!
Nick
@mobinick: You and I have the same situation.
I have 2 Universal dead like this. 1 Exec and 1 Jasjar.
Both dead, blank screen, can not enter bootloader, can not connect with PC. PC can not recognize the driver usb of the device.
I opened the phone and found that logically everything is so so. There is no clue about hardware.
So I think: the address of the bootloader with device ID maybe unlucky damaged.
Who can fix this problem pls share us some experience.
Thanksss
ta_mobile said:
@mobinick: You and I have the same situation.
I have 2 Universal dead like this. 1 Exec and 1 Jasjar.
Both dead, blank screen, can not enter bootloader, can not connect with PC. PC can not recognize the driver usb of the device.
I opened the phone and found that logically everything is so so. There is no clue about hardware.
So I think: the address of the bootloader with device ID maybe unlucky damaged.
Who can fix this problem pls share us some experience.
Thanksss
Click to expand...
Click to collapse
Why don't you guys take it to your respective service centres and get it fixed?
Even if you have to pay something, it will certainly be better than these bricks occupying table space.
Have you tried going back to an original O2 ROM? I went to 1.13.139 WWE and all is fine now.
Just to share my experience with you guys here:
I posted my problem way back during the Radio Upgrade from 1.04 to 1.06. My Dopod 900 got stuck on the splashscreen. I couldn't get my device to pass the splashscreen even after upgrading/downgrading the radio ROM back and forth two times.
Finally, I just forced my device into bootloader mode (Backlight+Reset+Power). Even after doing this, the dopod screen was completely blank (no indication of serial/usb letter on the screen). I downloaded the official O2 exec ROM and plug my device (in bootloader mode) back to the USB port. It said unrecognized port on my PC. Despite that, I reflashed my Dopod back with the NoID tool the complete O2 ROM (Radio, Main ROM & The extended). Once completed, my device regained its consciousness.
I managed to flashed back the 1.06 radio after that. And has since been upgraded 4 times (two i-mate, one Orange and the latest QTek ROM) with no problem whatsoever.
I had the exact same problem as you to guys, i tried to update it, and it wouldn't budge...
It constantly, without fail timed out... I tried everything...
As my hope started to wain, i gave it one last shot...
I took out everything, sim and sd and battery, then connect the battery back and from the bootloader menu, connected it to the pc, with usb cable...
Finally it worked!! Like normal, i was able to load any and all rom and radio updates...
Wouldn't work, from the normal working screen (which was working for a while, i later tested this out, and found out ) and also wouldn't work, from the bootloader (power+backlight+reset) with sim+flash in there....
Hope you guys have some luck.. I htink you should, because i was in the exact same boots as you guys...
It worked for me
My O2 Exec did exactly the same thing, and I spent (on and off) 24 hours trying to get the damn thing to go again - wouldnt charge either....
I too finally took out everything, SIM and sd and battery, then connect the battery back and from the bootloader menu (which I only found about from this site), connected it to the pc, with usb cable...
It worked as well - bloody brilliant. I now have the latest 02Exec Upgrade (Version 1.30.162 AKU2 Release) and all is great.
Cant believe that 2 days after logging email with O2 site, they have not responded...
Would almost kiss you guys.....
Solution for getting stuck in bootloader
http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen
Hello,
afther an update on my p3600 with an error.
I have only the bootscreen of the rom.
I cant flash any new rom , every time i have connection errors.
is there any chance to correkt the problem or to delet the phone completly?
A Hardreset doesn´t bring anything.
Please help me i cant do anything with my p3600.
take a look:
http://forum.xda-developers.com/showthread.php?t=572747
i read the thread,
but i have tested to update the hard spl but it doesn´t work.
The update software always told me that there is an connection error.
But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
This is the reason you should always install HardSPL BEFORE you start flashing any roms at all.
Once you have bricked it, then it is too late to put HardSPL on there.
The whole point of HardSPL is to ensure that you will always be able to get a connection to the device even if you have a broken rom on there.
If the phone is bricked, with no HardSPL on there, your only remaining option would be to try using an unbricking exploit procedure like this:
HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!!
^^^ Sorry I have never had to do this myself and have no experience or advice on how to use that exploit utility ... hopefully there is enough help in that thread to get you going again.
Good luck.
EDIT: I thought I'd better just check you do realise that you can get the Tri-colour SPL screen up manually by holding down POWER + CAMERA buttons and 1sec press of STYLUS RESET button. Quickly reading through that splxploit thread I was disturbed to see just how many people didn't even know who to do that
Maybe it's just my paranoia from owning an "i" model but I have never done a single rom flash without first using that 3 button trick to get into SPL screen.
praefke1986 said:
...But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
Click to expand...
Click to collapse
Try flashing the Stock ROM that came with your phone. It may get you going again. Can be downloaded from the HTC website.
Ok, I bought this phone from market in June means that I am not bound to any operator or carrier. I have Hboot 0.92 and radio 5.09.05.30_2
I have rooted this phone long time before, and because of rooting, I couldn't update my phone when phone checks for operating system updates periodically.
Now I tried to update my phone to latest available ROM here (Froyo (2.09.405.8) update - Windows not required). I renamed and copied the zip file in formatted card (only that .zip file in whole card) and tried to update my phone.
Everything seems to go fine but they went down the hill when RADIO_V2 starts to update. I get this error.
RADIO_V2 - Fail-PU
...
...
Partition update fail!
Update fail!
Now since the update is failure so I can't use my phone now. If I normal restart it then phone just hangs on HTC logo with 7 vibrations
Any suggestions?
Ok, now I have new problem:
Now I get either a white screen (as below) where neither of the buttons seem to work or a black screen with HTC logo in the middle with exclamation marks in the four corners of the screen.
**Screenshot is attached in the post because I can't use external URL due to account restrictions for new account.**
Going to have to bite the bullet and run an RUU...get it here:
http://shipped-roms.com/shipped/Bra...00.32U_5.09.05.30_2_release_142828_signed.exe
Boot into FASTBOOT (hold back button and press power) and once connected via USB (FASTBOOT USB on screen) run the RUU...should get you back to normal, albeit with wiped data
Thanks Eddie for your reply.
I tried this but the green update bar gets an exclaimation sign, and I see Error 110. I have downloaded this file many times in case if I have corrupt download problem.
anyone? or is my phone dead?
Edit: solved the problem..thanks everyone
Hi, can you please detail how you got the phone back to life?
Thanks!
If you've fixed the issue you need to let people know how you did it so future issues can be resolved for other users...
Hi, I have exactly the same issue and am wondering how you managed to fix it! Please let us know
oombongo said:
anyone? or is my phone dead?
Edit: solved the problem..thanks everyone
Click to expand...
Click to collapse
Hi,
I have the same issue , how did you fix it ??
Anyone??? please help ...
i hate it when people just make the questions just to do their job.
as long as you made it work you should post the steps to help others in similar conditions as you were.
think about it cause this is a community. we don't expect from HTC or others to help us but WE do expect from eachother!!!
sorry for my late reply. I wasn't visiting this forum and Internet much due to some problems in life.
Ok, here is what I did:
1. You MUST, MUST and MUST use x86 operating system. If you are using 64-bit then you are screwed.
2. Install HTC Sync but close the sync program from taskbar before you start to use RUU. HTC Sync has drivers which you need so you have no other choice but to install it.
Hopefully it helps
1. Not true, I've got Windows 7 x64 and can run RUUs without issues
I have Windows 2008 RC2 x64 and I had problems with it. The phone wouldn't update. The update progress bar was stopping at 70% or something
Might be an issue with the Server version...
Thanks! I'll try that...
I recently had a problem with a very new Desire on Orange UK - PVT4 - S-ON, hboot 0.93. I didnt have an orange sim and wanted to use my O2 sim. The sim worked when unlocked (my wife paid for an unlock code), but the wifi and data simply wouldnt work (seems to be a common problem)
Basically, I tried to write a new rom but kept digging myself deeper and deeper into a big black hole of bricked phone...
Eventually, after unsuccessfully trying to root, unlock, use a goldcard, use unrevoked 3 and downgrade to android 2.1 I ended up with a black screen with exclamation marks in each corner. I could only use RUU exe files to flash, so I started flashing random ROMS.
Each time it would fail with the green status bar flashing red, the phone vibrating and when it finally failed, I'd unplug the USB and see the screen saying it'd failed at step 2.
I looked for the most recent ROM I could find, and came across this one:
www dot mediafire dot com/?bbb7m2b4t5jejhm (i cant post external links)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
It worked! I now have a totally unbranded froyo, with newer radio and still have S-ON (which seems to be impossible!) and all my data (wifi + cellular) works fine
I really dont know what I did to get to this point, but everything I did failed. I'm hoping that this post might help someone with a newer Orange UK branded Desire, but since I'm writing it all down a couple of days after I fixed it, i'm not sure how helpful it will be!
At least the wife's happy now she has her new phone working (and i can go back to my simple world of HD2 + wp7 + nandroid)
i did same but no luck
check
http://forum.xda-developers.com/showthread.php?t=1000385&page=10
please help me.
P.S : Sorry, i know this is old thread.
any other sollution!!
i tried this but no luck
i've same problem withHTC from Orange UK also but didn't work for me
radio_v2 fail-pu
thx
j0ff said:
I recently had a problem with a very new Desire on Orange UK - PVT4 - S-ON, hboot 0.93. I didnt have an orange sim and wanted to use my O2 sim. The sim worked when unlocked (my wife paid for an unlock code), but the wifi and data simply wouldnt work (seems to be a common problem)
Basically, I tried to write a new rom but kept digging myself deeper and deeper into a big black hole of bricked phone...
Eventually, after unsuccessfully trying to root, unlock, use a goldcard, use unrevoked 3 and downgrade to android 2.1 I ended up with a black screen with exclamation marks in each corner. I could only use RUU exe files to flash, so I started flashing random ROMS.
Each time it would fail with the green status bar flashing red, the phone vibrating and when it finally failed, I'd unplug the USB and see the screen saying it'd failed at step 2.
I looked for the most recent ROM I could find, and came across this one:
www dot mediafire dot com/?bbb7m2b4t5jejhm (i cant post external links)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
It worked! I now have a totally unbranded froyo, with newer radio and still have S-ON (which seems to be impossible!) and all my data (wifi + cellular) works fine
I really dont know what I did to get to this point, but everything I did failed. I'm hoping that this post might help someone with a newer Orange UK branded Desire, but since I'm writing it all down a couple of days after I fixed it, i'm not sure how helpful it will be!
At least the wife's happy now she has her new phone working (and i can go back to my simple world of HD2 + wp7 + nandroid)
Click to expand...
Click to collapse
ok guys i'm new to the Incredible section but do know my way around android (HTC Thunderbolt,DroidX,D2G,OG,Samsung Capt..,Samsung Charge) I'll start by what i got.
I snaged a phone off ebay that claimed it worked but rebooted..(ok so do most androids) but taking out and reinserting the battery would fix it..(not so) it's a brick style loop....have only seen the desktop 1 time then instant crash...i'm stuck at the htc incredible screen....
so having this happen to me in the past on my others i went into the bootloader to try a recovery/factory reset....but no recovery will pop instead back to my loop.
OK next i searched the net to see about a salution...but all requires root which i DON"T have, the phone is S-ON and looks to be running Radio 2.15.10.07.07
and from what i've read there is no fix right now...
Still tring new things...I found that if i reflash the Ruu it sometimes works perfectly and others it Fails?? on the Radio. when it passes the phone reboots and loops in a wierd pattern starting with a fast loop (5 sec) then a slow(20 sec) and does it randomly after that till it finnaly just sticks in a Long loops and the only way to get them fast again is to reflash that Ruu......well just finished a Failed flash and clicked Volume up to restart...now just black LOL i think it just died...no Bootloader even....will report back if it changes.
things i've tried....Everything in bootloader (all in loops)
tried reflashing the Ruu via PB31IMG.zip for the OTA since i'm on it anyways..
anyways the seller is saying Sold AS-IS and i think it's crap because the item does not match the box Meid hex: even tho he said it came in the box...so anything i can do guys?
I did notice a weird pattern that it does tho....after installing the .zip ruu it will reboot fast (5 sec) then Slow (20 sec) and kind of flip flop till finally nothing but long restarts, even after pulling battery....the only way to get the short restarts back is to reflash the Ruu again..
ok might be closing this soon...things have gone from bad to F*^K my life.....reflashed the RUU agian and it failed on the Radio (has been doing that Sometimes, hit and miss) and said update failed Volume up to restart...now i have no bootloader or charge indicator...think it died now.
Bet you get your money back if you follow eBay & or Paypal dispute methods to the T.
kinda seems like the same problem as in this post:
http://forum.xda-developers.com/showthread.php?t=1247790
no solution though, can see what was tried.
Have you tried hooking your phone up to your computer and running the Verizon Froyo RUU to see if it will fix it? I have had that fix many issues in the past. From what you said, it has the most recent radio in it so it was probably being messed with.
If that doesn't work then you could just wait for the newest RUU to be released and that would probably fix it.
Hi All,
The story, I'm on vacation in Austria with my new HOX+ and suddenly I get an update for it. So I downloaded it and installed it. Suddenly I have no cell connection and cannot use wi-fi anymore. The phone is stuck in Airplane Mode and can not get out.
So I go looking on the web and spent hours reading on flashing, downgrading, rooting etc. So I decide to downgrade it to stock. Something went horribly wrong, as it didn't work. I unlocked it, every step correctly. Then I tried it again, and again, and again. Multiple different guides, video's everything. So then I thought I found a solution, install JB 4.1.2. So, following every step correctly I try this, no succes. But now suddenly I cannot see the sdcard, htc sync doesn't find my phone etc. Also, my phone doesn't go past the HTC bootlogo. I can now only run the bootloader by power vol-
So I try to flash the JB again, connection error, cannot find folder etc. So I start looking again, tried recovery, factory reset, nothing works. Flashed CWM 5.8.4.0 into the recovery, does not boot, only up to the HTC logo then powers down and reboots bootloader.
So here I go to the last resort: Stock RUU. I download the correct RUU for my HOX+ -in this case RUU_ENRC2B_U_JB_45_HTC_Europe_1.16.401.6_Radio_3.1204.168.32_release_297177_signed .... I start the programme and it works good and then it starts rebooting the bootloader and then I get the black background with silver HTC letters and then the RUU says Error 171 USB Connection Error.
I've tried about 10 times now in different USB slots, same thing every time.
Also, when I start the bootloader from scratch, it says Checking SD update... Failed to open usb master mode
Is there anybody who can help me? I have tried for 30 hours now, every single option (I think?)... I don't care what kind of ROM goes on there, stock, jb, evolution as long as it works!
Ran the RUU with admin rights?
Sent from my HTC One X
TToivanen said:
Ran the RUU with admin rights?
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, I did, first without and then multiple times with as I read that advice somewhere as well.
Also, I did relock the phone first as I read that somewhere, forgot to state above.
Ok the twentieth time seems to be a charm, after 5 hours trying the RUU is succesfully installed and everything works perfectly fine now!
Many thanks! Not sure if I would have tried again and again after it kept failing!
Also, probably wrong forum? HoX+ should have it's own forum does it not?
Gerolamos said:
Ok the twentieth time seems to be a charm, after 5 hours trying the RUU is succesfully installed and everything works perfectly fine now!
Many thanks! Not sure if I would have tried again and again after it kept failing!
Click to expand...
Click to collapse
i have same problem should i try diffrent RUU or try 20th time ??
what should i do