Related
@ all,
it might sound a bit surprising, but I dont get my new artemis ( i now own one with wifi !, my hero didnt!),
working with the wireless of my belkin n1 router!
everytime i enter the mac adress into the router, wlan stops alltogether! ( do i need to enter the mac adress?)
entering the normal wpa-psk passwords into wm6.1 vanilla or b&b5, the connection constantly changes between available, but not connecting, and unavailable... even when sitting right next to the router!
any ideas?
help highly appreciated!
greetz
thormdac
news:
got it working for now-- changed wlan channel in rpouter to channel11, which is preset in wm6.1!
is that how its done?
Update:
most of the times the router just kills the wlan function all in all once i try to connect with the artemis!
Need to reboot router to get it running again!
Where am i going wrong?
p.s. no, i aint a novice
I've got the same roblem mate. Not got a clue what to do ?
Had the same issue with a Belkin N router yesterday. Solution I dumped it went down to Maplins and got a Netgear. Plugin and I was away.
Had flashed the rom serveral times (Win 5, 6, 6.1 some of the cooked roms) nothing worked was thinking it was a hardware failure.
Dont' appear to matter how you set the belkin nothing works.
Thou oddly my Exec connects with it just fine.
Azriaphale said:
Solution I dumped it ...
Click to expand...
Click to collapse
Gee, that would for sure make me one unhappy pal!
Anybody around here has another idea!
Possibly some tips on "Must does" ! for connecting via wifi with artemis! Whats with the mac address-thing?!!!
Greetz
To be honest, I've looked at dozens of sites searching for a solution to this issue. Everything from flashing the ROM (Device and router), enter MAC on the router, set a IP address, changing channels, security settings and nothing appear to work with the Belkin N family.
My experience with Belkin has not been good (Tech support has always been first class).
The first router (Cheap 54g) would run for 2 hours then lockup, requiring a reset of both the router and cable modem). Replaced by Belkin after several days talking to tech support.
The second router (Same 54g unit, different Version number) Ran fine until you moved data about, anything downloading above 150k locked the router. Wired connections could do 300k then lock up. Replaced by Belkin.
The third unit (Upgraded to a 2 stick version for free) DOA. Replaced by Belkin
The forth unit (Same 2 stick version) worked data transfers good but would not allow wifi connections other than WEP 64. Firmware update would then WEP 128. Replaced by Belkin.
The Fifth unit (Same 2 stick version, different version) Wifi worked with all settings. However with wifi on all wired connections ran like a 56k modem. Replaced by Belkin.
The sixth unit (Upgraded to the N) Worked fine. Wired connections fine, wifi was a bit hit or miss, two Toshiba laptops connected fine, the Dell laptop never connected. Belkins own N usb dongle also never connected.
My Orbit never connected to any of the Belkins, the Exec did with some and others not.
This issue is not limited to Belkin, if you look about, other makers routers also appear to have this issue.
The cheap Netgear (£35) works just fine for me. Took 5 minutes to setup. Everything in the house connects. I`m happy after 7 months of Belkin issues.
uiuiui,
what a story!
just so we dont get us wrong here: had my n1 now for about 6months, and its running just fine with all my notebooks! - just since trying to connect with my artemis i am running into probs!
A theory of this mornings trials:
any way of changing the preconfigured broadcast channel 11 within the artemis? --- seems to me the channelchanging is causing the hangups!
will try setting the router to channel 11 and see what happens!
greetz
Ive set channel to 6 in the N router, the Art/Orbit will find it and go though the motions of connecting and make it unavailable (our problem with N routers). The Network setting will show its on ch6 (if you can there before it becomes unavailable). Then goes to ch11.
I think the Art/Orbit just runs in sequence though the channels, if it gets a lock it uses that channel. If not it moves on, I think we just see ch11 because its the last ch available in the scan.
Have just played with the Netgear channels and the Art/Orbit connects with every channel, the Network setting page shows the correct channel that the routers broadcasting.
So it don't appear that the channel is hard coded to the Art/Orbit.
Ok stumbled across this thread a little too late. Our Linksys wrt54g was not able to handle the kind of data we were transferring and moved to a Belkin_N1 router, I have an HTC Wizard but same symptoms, if I try to connect to Belkin I can not connect to anything WIFI before a soft-reset, I get prompted for key fine once and during connection something messes up the wifi radio, I am not sure if its a software or hardware issue but got the same issue with an SMC router, while my D-Link at home is working fine. I wasted so much time flashing ROMs and what not. Thanks for everyone who has put info here, somebody can read here and save the pain of hitting the wall with frustration.
I'm stuck, bamboozled and totaly F***ed off...
In other words... HELP!!!!!!
I've just bought off ebay a lovely XDA IIs (Blue angel) after my old XDA II died (A moments silence please in memory of a lost soul (ok XDA ))
This NEW one is great. But WiFi... Yes now there's the bugger....
I've got 2 wifi routers. a orange livebox (Inventel wireless magic, connects to a ADSL line) and a Netgear Rangemax (WNR834B, DSL router). I'm using the netgear as a network switch for 2pcs and 1 media server than I need to connect up to the net.
But try as I might (and I've been trying for 3 days now) I cannot get the XDA to connect to EITHER routers...
In fact the XDA wont find the connections at all, but using the hitchhiker software I finds BOTH routers at full strength. I've set keys up tried different channels everything I can see might be a problem. I even turned off the passwords for the wifi but no luck.
The livebox runs with WEP/WPA security and the Netgear is WPA-PSK(Tkip) + WPA2-PSK(AES). I've tried all kinds of keys from simple "im1fed2up3with4this5crap6" to full alpha-numeric 28character keys. Nothing seems to work.
Can anyone out there give me a few pointers... I'm beginning to feel a little bit... Lost.... ?!?!
Thanks People.
That's kinda weird. Though your BA can't see the connections but using hitchhiker it finds it and in full strength. Have you tried soft/hard resetting your BA?
Still problems
Hi sorry for the late reply.
I've done both Soft/Hard resets twice now.
When doing the hard resets I only install the basic .net settings required to get Hitchhiker working. Nothing still.
I've played with more settings on the routers tonight (lowered the speed settings on the Netgear from 240Mbps to 54Mbps), enabled WEP only on the same router. The Orange router doesn't seem to have as many options.
Hitchhiker still reports that the routers are at full signal strength but for the first time the BA reported that it found BOTH routers. Shame it still wouldn't connect to either (even with the new settings/pass keys). In fact other than the initital "I've found these routers" message the wireless manager wont show any signal strength. Clicking on tools/network cards shows both my routers as being there but I can't get a connection.
Any ideas.
BTW When using Hitchhiker it shows all the nearby routers with Large padlocks (passkey locked. No probs there) but mine are shown with a large antenna, small padlocks, and small (windows?) shield... does that help??
Hope it does.
Thanks for your help.
I'm really satisfied about defy's performances but there's something i can't figure out with WiFi connection. I'm currently using a netgear wireless-N router which works flawlessy with all the other devices, my defy instead is not able to stay connected for more than 10 seconds, keeping disconnecting and re-connecting to the router, continuosly. No way to use the browser or the market under Wi-Fi.
I'm also on a motorola's forum, there i found other people who experienced the same issue. Some of them say the problem is related to wireless-N routers and yes, it looks like defy works better with wireless-G routers (tested).
Btw, no problem with the 3G.
I was wondering if some of you, here in xda, got trouble with defy's WiFi.
FWIW, I use my defy with my linksys wrt54gl router with no issues whatsoever, so it very well may be the wireless n being the issue.
I'm using an access point (netgear) with wireless N and i'm connected to Wifi all the time. I've had this mobile for a week so i haven't noticed myself getting disconnected on skype...but it works fine with N
I see a wifi issue with my fritz.box as well. wifi is (and stays) connected, but no data is going through. I've found various tips like using static ip or using different channels, but in the end they didn't work for me.
so I rooted the defy and modified the tiwlan.ini where ht_enable was set from 1 to 0, which actually disables N, but gives me a reliable connection instead.
hth
thanks for your replies.
@trosenda
Most of the times it keep disconnecting but sometimes it stays connected but there's no flow of data, that is what happened to you.
I will try your method, disabling N (ht_enable set to 0) probably forces defy to go through G only.
thanks
I have a netgear wifi g and I have some trouble with defy which keep on disconnecting so I can't use the browser or the market...It's not related with wifi n because my router is only g but the problems are there...If you found a solution can you post a step by step explanation?
Solved I figured out defy don't like wifi n routers and protected ones. With a router that broadcasts on g channels with no protection (btw only mac adress control access) the defy works like a charm...hope this help others
kibiwi said:
Solved I figured out defy don't like wifi n routers and protected ones. With a router that broadcasts on g channels with no protection (btw only mac adress control access) the defy works like a charm...hope this help others
Click to expand...
Click to collapse
Thanks.
Yes the problem is exactly what you said - defy doesn't like too much w-N and secured routers. Not all the people have this issue, however, it has been reported to Motorola through their forum. Let's wait for their answer, hopefully there could be a kind of fix.
I was having the same issue with my Belkin N (secured) in my house. But in two other buildings I have G routers w/o issues. So, I figured, just swap the N for a G, right? No. As soon as I tried either of the G routers in the house, same problem as with the N. So I put the Belkin back in the house and spent some time adjusting its three external antennae. Bingo! I now have as solid a connection with the N as with my two other G routers. Must have been interference. Phones? Applianaces? Sonos? BTW the only other thing I had with the same trouble was my PS3. Now, it's connected perfectly as well. Interference.
I'm online through my Linksys 610n router, haven't skipped a beat since I got the phone...
kibiwi said:
Solved I figured out defy don't like wifi n routers and protected ones. With a router that broadcasts on g channels with no protection (btw only mac adress control access) the defy works like a charm...hope this help others
Click to expand...
Click to collapse
Hey guys, just wanted to let you know that turning of the n-standard on my router, going to b/g mixed (from b/g/n) worked great, no more disconnections. Before, is disconnected like all 20 seconds or so.
What worked for me:
My router is a netgear dgn1000 (a/b/g/n), i had WiFi issues for long time, i tried with the G mode only, tried all the possible configurations (both on phone and router), but nothing to do, disconnections every 10 seconds still going on.
Finally i got it working by following these three steps:
1) Update the router firmware (my router was updated to 1.1.00.41)
Then from your dgn1000 configuration page - 192.168.0.1 -
2) Go to "Wireless settings", switch to G mode
3) Go to "LAN Setup" and assign an address reservation to your defy (e.g. 192.168.0.5)
Note: I tried 2) and 3) before the firmware was updated, no success. So, if you have a dgn1000, first of all update the firmware.
Hope this can help
I don't lise connection but the signal is very weak with Wifi. 3g réception is inside on the other hand
Sent from my MB525 using XDA App
xdaid said:
What worked for me:
My router is a netgear dgn1000 (a/b/g/n), i had WiFi issues for long time, i tried with the G mode only, tried all the possible configurations (both on phone and router), but nothing to do, disconnections every 10 seconds still going on.
Finally i got it working by following these three steps:
1) Update the router firmware (my router was updated to 1.1.00.41)
Then from your dgn1000 configuration page - 192.168.0.1 -
2) Go to "Wireless settings", switch to G mode
3) Go to "LAN Setup" and assign an address reservation to your defy (e.g. 192.168.0.5)
Note: I tried 2) and 3) before the firmware was updated, no success. So, if you have a dgn1000, first of all update the firmware.
Hope this can help
Click to expand...
Click to collapse
I had the DGN1000 with firmware 1.1.00.35 and my Milestone 2 was connecting very well. Now, I have a DGN1000 with the 1.1.00.28 and my Milestone 2 doesn't connect at all: every 10 secs the connection is re-established with a new dhcp request.
Do you think I ONLY have to change my firmware? Or I have to change also the address reservation?
hi,
why my DEFY wifi N only connect at 65mbit ???? why not 150mbit???
who knows something about it ???
Hmmmm don't know what to say I gotta netgear dng 2000 have no problem with connection just that the router was a lil weak. Fixed that with antenna replacements. Defy has the 2.2.2 Nordic deblur
Sent from my MB525 using XDA App
i am using TL-WR1043ND and its disconecting about once in minute
changed to wifi B/G nothing helps
FLS-BR how you maneged to get defy with 16GB is it froms SD card
cHi all.
I got my new htc one x week ago. The problem is everytime i connect out home wifi, it works for some tíme and then, after 40minutes approx, wifi goes down and cannot be reconnected not even by computer or other phones. I ides to connect via dads samsung ave and it worked without problems. Is there a way my htc one x could be doping something with router? We also had people here from the providers company and they.changed everything, changed the type of.router, antena etc, yet still after.connecting wifi it only works some tíme. Then blackout. And have to reset whole wifi router...
Thank you for your answers.
Best regards,
Martin
martinko89 said:
cHi all.
I got my new htc one x week ago. The problem is everytime i connect out home wifi, it works for some tíme and then, after 40 minutes approx, wifi goes down and cannot be reconnected not even by computer or other phones. I ides to connect via dads samsung ave and it worked without problems. Is there a way my htc one x could be doping something with router? We also had people here from the providers company and they.changed everything, changed the type of.router, antena etc, yet still after.connecting wifi it only works some tíme. Then blackout. And have to reset whole wifi router...
Thank you for your answers.
Best regards,
Martin
Click to expand...
Click to collapse
Got the same problem with my HOX. I'm using a d-link router DIR-615. For me the only solution was to switch from a/b/g/n to only g (the 2.4Ghz band). When connected to Wifi via N band, I must reset the router frequently. So try to switch your router to G band only (2.4). Many forum talk about this issue but it seems this is more related to Android OS itself. Some user tried other combination like DHCP or Static IP, different security level (wep, wpa, wpa2). Hope this helped! If you find a better solution please tell me, i wish i could use my router in the 5Ghz band.
http://www.geeknewscentral.com/2012/01/03/android-causing-wifi-router-lockups/
Have a look at wifi analyzer app check your not sharing your channel with neighbours try changing channels worked for me
Sent from my HTC One CMX
whynot66 said:
Have a look at wifi analyzer app check your not sharing your channel with neighbours try changing channels worked for me
Sent from my HTC One CMX
Click to expand...
Click to collapse
This is a good idea:good:. find the channel with less trafic with wifi analyser https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer&feature=nav_result#?t=W251bGwsMSwyLDNd and set your router to that channel.
I had the same problem on a netcomm router. I had to replace my router anyway, so I ended up getting a netgear router and the problem has completely stopped.
It works on both 2.4G & 5G bands without hassle since changing. It also works on my work router which is a linksys.
I think there must be some issues between the HOX and certain brands of routers.
tsqpu said:
I think there must be some issues between the HOX and certain brands of routers.
Click to expand...
Click to collapse
The HOX isnt the only android device to experience this exact same issue (xperia x10,HTC Evo, HOX,Samsung Galaxy Ace GT-S5830, Xoom, Toshiba scribe, droid x) Maybe its related to some android builds or device's radios? Some pple are reporting this on many brands of router(Linksys,d-link, Sagemcom, cisco) but not all model of those brands and some of them reported that different settings resolved this issue (a/b/g/n to only g or b+g, AES to TKIP, wpa/wep or no security...). Its very strange and I hope someday they will find the cause of this HUGE problem. But for now Google and manufaturers are speaking like if this issue doesn't exist.
But i'm sure there is a way to solve this before replacing the router...
http://www.xoomforums.com/forum/motorola-xoom-general-discussion/11891-xoom-causing-linksys-router-crash.html
http://forum.xda-developers.com/showthread.php?t=1053080
http://www.geeknewscentral.com/2012/01/03/android-causing-wifi-router-lockups/
http://www.droidforums.net/forum/droid-x-tech-support/70285-droid-x-wifi-connection-crashing-home-wifi-network-help.html
alray said:
Got the same problem with my HOX. I'm using a d-link router DIR-615. For me the only solution was to switch from a/b/g/n to only g (the 2.4Ghz band). When connected to Wifi via N band, I must reset the router frequently. So try to switch your router to G band only (2.4). Many forum talk about this issue but it seems this is more related to Android OS itself. Some user tried other combination like DHCP or Static IP, different security level (wep, wpa, wpa2). Hope this helped! If you find a better solution please tell me, i wish i could use my router in the 5Ghz band.
http://www.geeknewscentral.com/2012/01/03/android-causing-wifi-router-lockups/
Click to expand...
Click to collapse
when i had weird router problems, basically my hox and only the hox caused the router to stop working completely for every device until rebooted, it even took out the other router that it was connected to.
my fix was changing the band thing as above. just try each setting and test each one
I have Samsung Note 10 Plus , it shows wi-fi 6 logo when connected to Asus Wifi-6 router AX88U. Sometimes, when I leave my home and come back, the Note 10 plus does connect to AX88U wifi-6 but the speed is slow (about 50 mbps on 200mbps connection). If I turn off wifi on my phone and turn it back again. I get blazing fast 226 mbps. I did check some forums and was advised to change phone wifi setting is to static IP with primary DNS to 8.8.8.8 and secondary dns as 8.8.4.4 but this does not help.
Other steps taken: I disabled Wifi-6 on my router, but issue does not go away even when wifi ac (5Ghz) is being used.
Also, I have done "forget" network on phone, restart phone, reprogram Wifi setting. No use...
Another interesting fact: I have connected Netgear R7900 (wifi ac only, Mu-mimo) in AP mode to AX88U via cat7 cable. One day, I had observed that as I entered my home, my phone had connected to the Netgear router and the download speed was 200mbps with ping of 8 milliseconds. While I was roaming in the home, I was simultaneously browsing a few websites on my phone, and I observed the phone went from Netgear to ASUS router because I could see Wi-Fi logo without the Wi-Fi 6 symbol and then as soon as it hooked to Asus, I could see Wi-Fi logo with Wi-Fi 6 symbol. All of a sudden, the download speed as tested on speed test app went down from 200 Mbps to 6 Mbps. I switched off the Wi-Fi of my phone and switched it back again. the phone then connected with ASUS router on Wi-Fi 6 and the download speed was 200mbps. So this means that my phone performs very poorly when first-time re-connected to ASUS router. Would this be an issue with my phone not receiving signals properly - because of some issue while acting like a wifi-6 client?
Can someone please advise me how to have my phone connect to router with full internet speed? This only happens if I go out of home and come back in AX88U signal range. Also is this a router issue or phone issue? All other devices in my home are wireless ac (Wifi 5) only and have no issues with Asus router. Asus customer support is pointing finger on the Note 10 plus. Please help!
From what you've described here I would say the issue lies with the assus router. Since the netgear works fine.
On reconnect maybe it's not recognizing the phone properly. When it reconnects to your phone with slow speeds have you checked the router's connected device map? (shows what devices are connected to it) does it recognize properly?
lennie said:
From what you've described here I would say the issue lies with the assus router. Since the netgear works fine.
On reconnect maybe it's not recognizing the phone properly. When it reconnects to your phone with slow speeds have you checked the router's connected device map? (shows what devices are connected to it) does it recognize properly?
Click to expand...
Click to collapse
Thank you lennie for your reply. Yes, the device shows up on clients list/ device map. Router does handshake immediately but does not transmit proper speeds. Only difference here is Netgear is AP and is Wifi 5 (ac Mu-mino), whereas Asus ax88u is Wifi 6, ax, main router. So phone does talk well to Netgear but in ac mode. Phone immediately talks to Asus in ax mode but slow speeds. If there is any other way out please let me know... TIA.
gaggz said:
Thank you lennie for your reply. Yes, the device shows up on clients list/ device map. Router does handshake immediately but does not transmit proper speeds. Only difference here is Netgear is AP and is Wifi 5 (ac Mu-mino), whereas Asus ax88u is Wifi 6, ax, main router. So phone does talk well to Netgear but in ac mode. Phone immediately talks to Asus in ax mode but slow speeds. If there is any other way out please let me know... TIA.
Click to expand...
Click to collapse
Hmmm have you tried to reset network settings on your phone yet? But I seriously think it's a problem with the router and not the phone.
Does this problem only happen to the Note 10 and no other device?
Have you checked for router updates?
Do you use a private DNS service? VPN?
Do you have WiFi power saving mode enabled?
lennie said:
Hmmm have you tried to reset network settings on your phone yet? But I seriously think it's a problem with the router and not the phone.
Does this problem only happen to the Note 10 and no other device?
Have you checked for router updates?
Do you use a private DNS service? VPN?
Do you have WiFi power saving mode enabled?
Click to expand...
Click to collapse
Hi lennie
I did reset network settings, including forget network>reboot> re-program wifi password. Nothing worked. Router is updated. I do not use private DNS or VPN. Not sure about power saving, all settings are default... Also; in the past I used to have Netgear R7800 as main router and R6900P as AP, such incidents did not occur. Not sure where the problem lies. While contacting respective customer care, Asus blames Samsung and vice versa.
gaggz said:
Hi lennie
I did reset network settings, including forget network>reboot> re-program wifi password. Nothing worked. Router is updated. I do not use private DNS or VPN. Not sure about power saving, all settings are default... Also; in the past I used to have Netgear R7800 as main router and R6900P as AP, such incidents did not occur. Not sure where the problem lies. While contacting respective customer care, Asus blames Samsung and vice versa.
Click to expand...
Click to collapse
FYI for everyone - I just got on phone, my 4th time with Asus. They finally agreed that one more user was facing same issue so they have taken feedback seriously and are addressing this connectivity issue via another firmware update. No idea when this would be released. Asus asked me to return to original seller (an individual on eBay as it is within 30 days of purchase) or send to Asus for service. If service, then I will have to pay for shipping and arrange for a temporary router myself. Hence returning to seller on eBay. So we do have issues where router will not talk well with certain devices!
gaggz said:
FYI for everyone - I just got on phone, my 4th time with Asus. They finally agreed that one more user was facing same issue so they have taken feedback seriously and are addressing this connectivity issue via another firmware update. No idea when this would be released. Asus asked me to return to original seller (an individual on eBay as it is within 30 days of purchase) or send to Asus for service. If service, then I will have to pay for shipping and arrange for a temporary router myself. Hence returning to seller on eBay. So we do have issues where router will not talk well with certain devices!
Click to expand...
Click to collapse
OK thought so. Glad to hear that they've taken your issue. There's a reason people don't buy Asus products anymore like they use to especially motherboards. They tend to do some things right and others just wrong which you usually don't find out until it's too late.
lennie said:
OK thought so. Glad to hear that they've taken your issue. There's a reason people don't buy Asus products anymore like they use to especially motherboards. They tend to do some things right and others just wrong which you usually don't find out until it's too late.
Click to expand...
Click to collapse
Thanks lennie - any suggestions for a good router? I have one R7800 acting like AP, handles about 15 devices on 2.4Ghz (IoT - smart plugs, 3 wifi cameras @720p, not too much data load; and AX88U main router that handles about 8 devices, where most work is done, like iPads, Cellphones, Laptops on 5Ghz. I need to choose one main new router as I want to get rid of AX88U. Shall I get another R7800 as I did not see any performance difference between Wifi 5 & 6 on a 200mbps bandwidth - or I have shortlisted Wifi-6 RAX80 Netgear as main router. Any advice? TIA!
gaggz said:
Thanks lennie - any suggestions for a good router? I have one R7800 acting like AP, handles about 15 devices on 2.4Ghz (IoT - smart plugs, 3 wifi cameras @720p, not too much data load; and AX88U main router that handles about 8 devices, where most work is done, like iPads, Cellphones, Laptops on 5Ghz. I need to choose one main new router as I want to get rid of AX88U. Shall I get another R7800 as I did not see any performance difference between Wifi 5 & 6 on a 200mbps bandwidth - or I have shortlisted Wifi-6 RAX80 Netgear as main router. Any advice? TIA!
Click to expand...
Click to collapse
Tell you the truth I wouldn't know. But I would go with what works, if the R7800 are works then I don't see why not.
lennie said:
Tell you the truth I wouldn't know. But I would go with what works, if the R7800 are works then I don't see why not.
Click to expand...
Click to collapse
I got informed via another forum subscription that a new AX88U firmware update was out.......
It also happened around the day I was in a bitter situation as I was waiting for seller on eBay to accept my return request. He is a good guy who did not use the router on Ax devices. Now that I have purchased from him and using it on ax client, we came across this issue. Immediately upon reading this note, I updated the router firmware. I then went outside my home for a short walk but when I came back, my cellphone still had poor download speed with router upon reconnecting on 5Ghz. I explained this new observation and sent screenshots of speedtest and the seller kindly accepted my return request. Sadly this update did not sort out my issue.
But here is the good part: I had purchased a new AX88U at full price from Amazon. Initially I noted my 2.4 Ghz speed was very poor 4-25 mbps even when "6" was seen in wifi logo, means cellphone and router were on some new signal standard. With this update, I am getting 7 ms ping and 120-130 mbps download speed (same speeds on 2.4 Ghz with the "faulty" router described above). So this update did really speed up the internet speeds most evidently seen on 2.4 Ghz frequency. Also worth noting: I am not having the "poor download speed upon reconnect" with the brand new router that I just got.
Hello from Germany
This is a bug i already noticed and spent hours and hours with my Note 10 Plus and Asus AX88U !!! Now after 2 Month i give up. If you have 2 same 5GHZ Networks in your house (for better coverage) with the same SSID you can
see what is happening. My Internet Provider Speed is 200 down and 80 up. When first connected to the Asus Wifi 6 Router everything is fine. Than when you go one floor up you will get connected to the Other (i have tested both Asus AI and also as normal Access point via Ethernet ) Router and everything is ok. But than when you go back and connect again with the Asus AX88u in Wifi6 the Download speed on my Note 10 Plus is capped at 4-7 mbps down and 10 up !!! from 200/80. This is only affecting on the new Asus AX88u and Note 10 Plus and it doasn't metter if you switch Wifi6 or use Wifi5 AC . I tested also without 160 Mhz and every other mode nothing is changing. The sync on the Note 10 Plus is 1200 mbps on 5 GHZ so the most possible sync between note 10 device and the Router !! But after you connect to the same SSID on other channel in your house you will have this bug when returning to the Asus AX88u ! Only way is WIFI off and ON and all Speed are back again on Note 10. I have written to Samsung but no one replyed. With other devices like IPAD Pro 12.9 2018 or some Xiaomi devices everything works fine. Only Note 10 Plus is having this Bug . Most of the People will not notice it because almost all services will run fine for them with 10 mbps but i do because i always have my note 10 with Network Data in Statusbar and want to know all the time my network speed etc.
Sry for my English but i hope you understand. Definitly a AX88u Bug !
UPDATE: I tested with new Firmware from 25 of November they seemed to fixed it !!!
Update again : The Bug is still there! Almost every time when u roam in your house and reach again the wifi 6 router from Asus.
Again I have two wifi in my house with same ssid and different channels. It doesn't matter if you put the second router in access point mode or normal router(connected via ethernet cat 6 to Asus) . I also tryed a second Asus Router in Asus Mesh mode wired and over WiFi. Still same behavior.
When first connected to the Asus rt ax 88u with my note 10 plus everything is fine. The wifi sync is 1200 mbps when in same room and I get all of my isp bandwidth 200/80 from my provider. When I move upstairs and reach the second Hotspot the phone automatically switches to the other router (also tested different once). Also here everything is OK you get the full bandwidth up and down. But as soon as you return to the wifi 6 coverage of the rt ax88u the wifi speeds are dropping to almost 4-7 mbps! Down and maximum 20-30 up. Really strange behavior the sync is normal with 1200 mbps but you get no bandwidth! When moving up to the other network everything works fine again.
Also tryed with switching of ax mode but same problem with AC mode. This is a huge bug with Galaxy note 10 plus and Asus AX 88u Router
I recently acquired the Tenda NOVA MW6 mesh network, and have noticed wifi speed issues only with my note 10, not with roku 4k, not with my box S, not with galaxy tab s6, only with note 10, my cablemodem, it has the option wifi, also had problems, also only with note 10 ....
bovoro said:
I recently acquired the Tenda NOVA MW6 mesh network, and have noticed wifi speed issues only with my note 10, not with roku 4k, not with my box S, not with galaxy tab s6, only with note 10, my cablemodem, it has the option wifi, also had problems, also only with note 10 ....
Click to expand...
Click to collapse
Same here, also the Tenda NOVA MW6, and also only speed problems with my Note 10. The reason why t¡is because Note 10 connects to 2.4 Ghz network that seems to be much slower than 5Ghz. Sometimes, out of the blue, Note 10 connects to 5Ghz wifi and then no speed problems at all. I'm trying to find out how to force 5Ghz connection or how to turn off 2.4 Ghz on Note 10, but Google disabled that options in last Android version. So, there seems to be no solution, maybe rooting could solve the issue.