Related
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
If some one can get the password for the rom, I can try to extract the cab.
I would try the same ones used for the MDAIII rom. itsme was the one that came up with the passwords.
Well paul, I'm not going to go fishing for them. So if you want to post them or pm me with them great otherwise. :arrow: :twisted:
HP ROM is not locked!
Guys,
I just opened the HP nk.nbf file and it is not locked, so no password is needed.
Mikee4fun,
Since it is unlocked, can you pull out the cab for the media player 10?
Instructions and names of tools would work also, thanks for any and all help.
Paul.
Re: Windows Media Player 10 MobileROM .nbf file found on HP
paulmc said:
Guys,
I searched but didn't see anything about WMP 10 ROM CAB being posted. I searched all combos I could think of so sorry if this is a repost.
HP released a ROM update for an HP rx3000 ipaq
http://h18023.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
This file is a ROM update for the device. I downloaded the .exe and unzipped it, it had the .nbf update file but I'm not sure how to pull the individual cab files out of it, does anyone know how to do this?
Thanks,
Click to expand...
Click to collapse
I've been trying to download this file, but it always says file not found on the server...
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Re: Windows Media Player 10 MobileROM .nbf file found on HP
ZeroXtreme said:
I've been trying to download this file, but it always says file not found on the server...
Click to expand...
Click to collapse
This is no good. I've downloaded the SP29295.exe and dumprom the nbf file. It confirms my suspicion that it is an update of the HP iPAQ rx3700 OS files (including WMP10 mobile) and not just individual CAB files.
Unless someone can tell me what are the exact files in the WMP10? I've tested using other versions of ROM, and it seems like I've invariably replace files that affects the core integrity of the OS.
However, I still harbour the fantasy that we might port this stuff over to XDA2.
If you can't get to the right URL link, search at google with the following search string:
"HP iPAQ rx3700" "mobile media companion" update
My link:
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22157.html
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Paul, the windows media 10 is not a cab install rather a part of the windows mobile 2003 se system. It would require someone to go find all the dll files, registry setting and core file install directory contents to make the whole thing work.
Mike
twinkle said:
pochreyes said:
Zero,
Maybe it's in one of the files in this ftp site - ftp://ftp.compaq.com/pub/softpaq/sp29001-29500/
Poch
Click to expand...
Click to collapse
Zero,
From this FTP site, download sp29416.exe, it's easier
Click to expand...
Click to collapse
Got it, thanks.
RE
Hope that somebody could come out with a cab file for separate installation.
:roll:
lets just hope someone can rip the entire se OS from another device and make it work on XDAII. The 2.02, 2.06 and 2.20.07CHS (translated) are getting their bit by bit...
any got wmp 10 from the rom then pls do share.
thanks
jeet
list the dll files u need and i'll help u to get them coz i have i-mate jam ROM and i'v extracted all rom filed includes all exe and dll files
all i need a list of needed files 8)
I think the lack of knowledge on the files pretaining to Windows Media Player 10 are ther reason why someone is going to have to have a copy of the ROM and go routing about for the files.
Loading rx3700 nbf file into ER2003Edit asks for a password. Is there any way to find that password?!
installing WMP 10 to XDAII
hi guys!
-can someone tell me,is it posible to install WMP 10 to myxdaII?
-Thank you in advance
Hey Everybody, I downloaded WM6 and it worked like a charm. However, for Office Mobile, can you only edit documents that you already have saved or can you start a new document. I tried starting a new document, but it word, excell, and powerpoint take me to the file explorer page. Can anyone help me please?
help with what exactly?
you can't create a new doc, just edit.
the work around is to create blanks on your pc and save them on your phone. just edit the blank and save as.
if you use bittorrent you can download Office Mobile and install it. Worked for me, but not on WM5 when I reverted back.
@sam1964:
look at this thread at modaco forum (you must register to download files).
Newchurch
I downloaded modaco's app, it works great. How did you download office mobile? I see you said bit torrent, do I just put Office Mobile in and search?
How do you download the modaco app?
Can anyone give me a detailed way of how to download modaco's app please?
register at their site and then you can download it.
... (you must register to download files).
Click to expand...
Click to collapse
... didn't I say that ? ; )
How to properly unzip the file and install CAB file for the Modaca app?
I tried unzipping the modaco file and that worked out perfectly. However, when I download the CAB file in the my documents folder in the phone. next, when I try to open the CAB file in the my documents folder, then the phone says cannot open the specified file because it has to be associated with a program that I have already downloaded. Can anyone give me a step by step way of dowloading it please?
Hi to all! I've moto mpx200. Where i can find WM6 for it?
lcm86 said:
Hi to all! I've moto mpx200. Where i can find WM6 for it?
Click to expand...
Click to collapse
*ding* *ding* I think we have a winner for most ignorant post of the day. Just kidding. Really though, you're in the wrong section for the forum for the mpx200, and the mpx200 is so damn old that the support for it has ended, which means that there's no way in hell wm6 is going to be put out on it. In fact, WM5 final was never released for the device.
Hi!
Is there a cab file that I can use for installing Media Player?
I have installed Black Shadow Lite and is probably the fastest ROM that I have used so far. But it does not have WMP and cannot get any ringtones to work.
Hence this question.
Regards,
SKC
Windows Media Player
2007skc said:
Hi!
Is there a cab file that I can use for installing Media Player?
I have installed Black Shadow Lite and is probably the fastest ROM that I have used so far. But it does not have WMP and cannot get any ringtones to work.
Hence this question.
Regards,
SKC
Click to expand...
Click to collapse
I had the same problem......Go here read post #30! (at the bottom of page)
http://www.4winmobile.com/forums/hermes-black-rom-support/9886-black-iv-shadow-le-2.html
Mike,
How did you get the registry to be imported? I could not find RedEdit anywhere on the system. I downloaded PHM and it would not allow me to import the reg file.
2007skc said:
Mike,
How did you get the registry to be imported? I could not find RedEdit anywhere on the system. I downloaded PHM and it would not allow me to import the reg file.
Click to expand...
Click to collapse
I used the registry tool from SKTools. Resco Explorer has a registry editor as well it should work too.
I tried importing it with Resco as well and I get the message "The specified file is not a Registry script".
Still cannot get MP3 ringtones to work, even though I have followed JJ's instruction exactly.
Also, WMP does not find any of my MP3s on the storage card. This is very annoying, as it's such a good ROM.
Any ideas? Thanks in advance.
OEM supplied by Schaps. This version already integrated in his last ROM.
Not like previous version, this version Profile Tab already work correctly. No need to do anything. I have use it for several days and I dont notice any notifications queue issue or wild vibrate at all.
But I do change the following:
-Installation directory change to \HTCHome instead of \Windows
-To get Brightness shortcut working, the same patch as previous version applied.
-The same patch applied to enable the Tab Setting through registry.
Other than that Nothing. Much better version than v1.5
Color version uploaded!!!!
If you are ROMcooker, download the htchome.dll for rom cooker .
Install sdkcert.cab if you have not done so.
There are about 100 pages of discussion about v1.5. Lets not repeat what have been discussed over there like: Clicking left most mail icon will take you to MMS, how to change music tab tolaunch HTC Audio Manager, and so on and so on. I dont plan to follow up closely on these thread as I think this version is very good already. Should there be any fix, change, etc please refer to the respective post.
Enjoy
Is this better than the one you had released with your kaiser skin?
Currently i am using that, is it worth me updating?
Thanks
Bennec, the one you are using is v1.5.xxxx. Very earlier and uncomplete version that has been tweaked to make it reliable enough to be used. This version is a new build with the profile tab working and additional features in the contact tab thatenable you to select what number ina contact for the speed dial. Definately worthed.
Can you post a version where the files do go in the windows directory? I want to cook this in, but not have duplicates.
TooSharp said:
Can you post a version where the files do go in the windows directory? I want to cook this in, but not have duplicates.
Click to expand...
Click to collapse
you can, just use windiff on the SYS and OEM folders of your kitchen, the dump folder is created by processing these 2 folders, so any file dups will be in there BEFORE you run buildos.exe.
add you package, then run windiff ont he SYS and OEM folders, it will find the file duplicates, and delete the ones that ARE NOT from your new package!!
bennec83 said:
you can, just use windiff on the SYS and OEM folders of your kitchen, the dump folder is created by processing these 2 folders, so any file dups will be in there BEFORE you run buildos.exe.
add you package, then run windiff ont he SYS and OEM folders, it will find the file duplicates, and delete the ones that ARE NOT from your new package!!
Click to expand...
Click to collapse
Maybe I should have been more clear.
When creating a rom, all files will be placed in the windows directory, if you need files in a different directory like the cab posted above you will have to use initflashfiles which just copy the files to a new folder, then you will have duplicates. I just don't want 2megs of photos in two spots.
Garphical Anomolies
@schen you need to swap some of the icons for my fixed ones!!
please Download this Original Icons Fix and add it to you package. 2 of the black and white icons (Music and People) dont react properly when you select them.
that link fixes them!! (it is not just yours, it is a common problem with all htc home plugins!!!)
TooSharp said:
Maybe I should have been more clear.
When creating a rom, all files will be placed in the windows directory, if you need files in a different directory like the cab posted above you will have to use initflashfiles which just copy the files to a new folder, then you will have duplicates. I just don't want 2megs of photos in two spots.
Click to expand...
Click to collapse
Your question makes no sense then!
When you COOK this in obviously you would remove the version you already have in the ROM therefore you would not have the duplicates.
Also if you just created an package out of the cab above you will get NO initflashfiles therefore the package will install to the windows directory!!!
bennec83 said:
Your question makes no sense then!
When you COOK this in obviously you would remove the version you already have in the ROM therefore you would not have the duplicates.
Click to expand...
Click to collapse
You still don't understand. My problem is NOT buildos failures. I don't want duplicates when the rom is complete. Any time you use a initflashfile you will have duplicates in the finished rom. That is what they are for. Again the problem is not with duplicates in the OEM and SYS. If you go back and check my posts you will see I helped you with this exact problem. I know how to create a rom!!!! What I don't know how to do is edit the dll file to redirect it to look in the windows directory for the png files. Hence why I'm posting.
bennec83 said:
Also if you just created an package out of the cab above you will get NO initflashfiles therefore the package will install to the windows directory!!!
Click to expand...
Click to collapse
Yes you do get a initflashfile that copies all the png files to HTCHome. See attached.
schen, installed & everything working fine, except for one, am unable to use the hardware navigational pad when accessing music tab, from there u can't proceed to go up, go to ff, rw or play button.
Touchscreen function (for all of the above ff, rw & play tabs) in music tab is working though.
thanks anyway.
TooSharp said:
You still don't understand. My problem is NOT buildos failures. I don't want duplicates when the rom is complete. Any time you use a initflashfile you will have duplicates in the finished rom. That is what they are for. Again the problem is not with duplicates in the OEM and SYS. If you go back and check my posts you will see I helped you with this exact problem. I know how to create a rom!!!! What I don't know how to do is edit the dll file to redirect it to look in the windows directory for the png files. Hence why I'm posting.
Yes you do get a initflashfile that copies all the png files to HTCHome. See attached.
Click to expand...
Click to collapse
Funny, i created the package and i didnt get that!!!
il have to look into the flashfile generator in using (im not using the core one that you are!!)
Thanks for the heads up and apologies for the confusion!!!
bennec83 said:
Funny, i created the package and i didnt get that!!!
il have to look into the flashfile generator in using (im not using the core one that you are!!)
Thanks for the heads up and apologies for the confusion!!!
Click to expand...
Click to collapse
No problem. Thanks for the help. Sometimes it's hard to convey what you are thinking in words, especially about something so confusing.
TooSharp said:
No problem. Thanks for the help. Sometimes it's hard to convey what you are thinking in words, especially about something so confusing.
Click to expand...
Click to collapse
Well then my answer to your question would be to remove the initflashfile, then everything would get installed to the windows directory and since you have no need for shortcuts, this would be fine!!!
been using this for a while and saw the new version a while ago. has option of more when u go to the 4 day detail in weather. fonts seem nicer and all. looks like a good upgrade to 1.5 Bennec83 irc bro
schen said:
OEM supplied by Schaps. This version already integrated in his last ROM.
Not like previous version, this version Profile Tab already work correctly. No need to do anything. I have use it for several days and I dont notice any notifications queue issue or wild vibrate at all.
But I do change the following:
-Installation directory change to \HTCHome instead of \Windows
-To get Brightness shortcut working, the same patch as previous version applied.
-The same patch applied to enable the Tab Setting through registry.
Other than that Nothing. Much better version than v1.5
I will create a separate Cab based on Schaps color version as well in a minute after a few try this cab with no problem.
Enjoy
Click to expand...
Click to collapse
Thank you for the new version, and tab setting is essential. Thanks again!
bennec83 said:
Well then my answer to your question would be to remove the initflashfile, then everything would get installed to the windows directory and since you have no need for shortcuts, this would be fine!!!
Click to expand...
Click to collapse
Just tried that. It doesn't work without the png files in the HTCHome directory. I guess we can't have everything.
The special dll for installing n Windows directory uploaded. Use that dll.
On the subject of weather plugin.
I am not sure why is there a need for a pre-configured xml file. Anyway, you need a gui to choose the city. Why not have a gui where you could enter the data which is stored on xml file. I suppose rather than sending an entire xml line when communicating with xml service, build an xml file base on the data entered via gui.
As I understand it, the DLL was just edited using a hex editor as \HTCHome and \Windows has the same number of characters, it sounds like it wasn't a decompile thing or something like that.
I'm not at home at the mo so I can't check but if you load the DLL up into a hex editor (winhex?) then replace all the \HTCHome text with \Windows, you should be good to go.
This is just my uderstanding though of what I've read in the previous....saga
Smiffy.
schen said:
The special dll for installing n Windows directory uploaded. Use that dll.
Click to expand...
Click to collapse
Thanks for the fix!!
Hi all,
I have had a couple of questions on how to change the globe on the internet tab from the globe to a pic of your choosing.
I have attached the files you need. All you need to do is Create 2 png pictures that are 512x256 and name them the same as in the files.
Once you have done this copy them onto your device,turn off touchflo and drop them along with the mainla file into your windows directory using total commander (or similar) and restart touchflo and hey presto your very own internet icon.
Have fun
works great!!
I made a nice Opera logo, maybe someone likes to use it.
Can't find a good screen capture program, just try it.
You have to copy all three files to the windows directory using total commander or other.
EDIT: found screen capture program, so now included
very nice
Hope to see a few more of these on here. People have been looking but no one has replied.
People I WANT TO SEE YOUR ICONS
David Balfour said:
Hi all,
I have had a couple of questions on how to change the globe on the internet tab from the globe to a pic of your choosing.
I have attached the files you need. All you need to do is Create 2 png pictures that are 512x256 and name them the same as in the files.
Once you have done this copy them onto your device,turn off touchflo and drop them along with the mainla file into your windows directory using total commander (or similar) and restart touchflo and hey presto your very own internet icon.
Have fun
Click to expand...
Click to collapse
Hi... I like your internet glob. Can you make it into a cab file? I am very bad at this so far so would be great.
Thanks in advance
Hi , sorry to trouble you but could you or anyone please upload the stock 'Internet tab Globe' icon for me ? My operator decided to use its own logo for the Launch Browser icon and it looks quite terrible
Thanks in advance
David Balfour said:
Hi all,
I have had a couple of questions on how to change the globe on the internet tab from the globe to a pic of your choosing.
I have attached the files you need. All you need to do is Create 2 png pictures that are 512x256 and name them the same as in the files.
Once you have done this copy them onto your device,turn off touchflo and drop them along with the mainla file into your windows directory using total commander (or similar) and restart touchflo and hey presto your very own internet icon.
Have fun
Click to expand...
Click to collapse
Very beautiful globe! no need to quit/restart touchflo by the way... just unzip in /windows and it works!
Thanks
t0k0m0k0 said:
Very beautiful globe! no need to quit/restart touchflo by the way... just unzip in /windows and it works!
Thanks
Click to expand...
Click to collapse
Unfortunately this does not work on my German O2 stock rom.
They probably use another manila file for selecting the image on the internet tab.
I have to investigate further...
Here try this Cab File.
I finally solved it, thanks to this thread http://forum.xda-developers.com/showthread.php?p=2861249
I have to edit a file in \Application Data\Manila which holds the information about banner and operator links.
Thanks anyway for the information in this thread
BTW: You can add a property Text to the Banner node to display a heading under the banner icon
Many thanks to David. I've customised my Internet globe.
I 'emptied' the Youtube text as well as picture reference fields in your attached XML. So nothing shows. Hmm, now I am wondering how I can incorporate another program icon to be exact ...
remove the globe
Thanks for the tutorial, but to me the globe is useless, i would like to start at the tab with only my favorites and no globe at all; so is it possible to fully remove the globe?
I dont know. It might be possible but due to way TF3D uses the Mainla files you would have to modify it in such a way that it doesn't know there should be anything there and that it going waaay above my head.
It's not as simple as deleting the file you might actually have to change the more progamming but i'm sure someone could help
Guus_ said:
Thanks for the tutorial, but to me the globe is useless, i would like to start at the tab with only my favorites and no globe at all; so is it possible to fully remove the globe?
Click to expand...
Click to collapse
You just need to delete the "Banner" node (i.e. everything between and including "<Banner [...] />", without the quotes.).
Regards
K_Hismoom
Just played around and found I could remove youtube icon. All I did was to delete the everything within <OperatorLinks>.
Dear friend, after i have copied the 2 png pictures to the manila file, turn off and restart the TFL3D, the globe ico remain unchange. Would you give me more detail on how to fix it. By the way, there are two files named InternetPortal and InternetPortal-zh-CN, anything i need to do about that? thanks.
K_Hismoom said:
You just need to delete the "Banner" node (i.e. everything between and including "<Banner [...] />", without the quotes.).
Click to expand...
Click to collapse
Would help if I could find the folder \Application Data\Manila\ , let alone the file InternetPortal-en-gb.xml. It is most vexing!
BTW
I am using Total Commander on an OrangeUK 1.14 ROM Touch HD
EDIT
====
Nevermind, I did a bit more forum searching and found the right file to edit.
It is 27c65cbd_manila in \windows\ (for me anyway)
diamondsnake168 said:
Dear friend, after i have copied the 2 png pictures to the manila file, turn off and restart the TFL3D, the globe ico remain unchange. Would you give me more detail on how to fix it. By the way, there are two files named InternetPortal and InternetPortal-zh-CN, anything i need to do about that? thanks.
Click to expand...
Click to collapse
Have you tried the Cab file I have attached as well. Let me know if this works?
Which Globe Icons are you wanting? The blue globe or My Metal Firefox
how can you add your own links like the youtube one?where does it come from!
how do u make the surounding of the picture invisble becouse if its black i have a bleu background how to make it gone.. ?? sorry bad english
ideally you need to use photoshop. This will allow you to delete the background so leaving it as it should be