Friends, this has happened after I'd been using it for month.Suddenly this message came up on the screen-PIN2-Only Emergency calls. I've bought it as a second hand,so asking the former owner looks almost impossible. Hard reset didn't help of course. Any comments or advices?Thanx in advance.
redeemer said:
Friends, this has happened after I'd been using it for month.Suddenly this message came up on the screen-PIN2-Only Emergency calls. I've bought it as a second hand,so asking the former owner looks almost impossible. Hard reset didn't help of course. Any comments or advices?Thanx in advance.
Click to expand...
Click to collapse
I remember reading that on T830, the correct PIN is stored in the Registry. If you can find the info where (do a search here I guess) and have a backup of the original installation of the old user, maybe this helps you.
How to edit the Registry
Hello
I´m new hear and want to edit the registry to find the unlocking code. I dont know how to edit it. Please help me.
Regards
Hans Georg
Related
Hiya everyone.
I had a search for this, and was unable to find the solution, so I apologise if this has been asked before.
Is it possible to revert my XDA 2's OS back to its original state after its been upgraded to WM 2005?
I only ask because I wish to sell my XDA 2, and there are certain aspects of the new OS that don't run properly (The 2 side buttons - camera and voice recorder no longer work, and I am unable to connect to the internet as the o2 settings were wiped, and they are unable to provide me with the manual details).
If this is possible, then great... if not, then I'll have to make do really (unless someone can offer assistance on the problems above?).
Oh just for reference, I used the guide on this forum to upgrade to WM 2005, so you can see the exact process I went through.
Thanks to anyone who is able to help.
Failing any help, can anyone post a rom of the OS in its original state for the o2 XDA2?? (with o2 Active, despite how many ppl hate it! lol)
I'd just like to get it back to its fully-functioning self again.
SpasmicPuppy said:
Hiya everyone.
I had a search for this, and was unable to find the solution, so I apologise if this has been asked before.
Is it possible to revert my XDA 2's OS back to its original state after its been upgraded to WM 2005?
I only ask because I wish to sell my XDA 2, and there are certain aspects of the new OS that don't run properly (The 2 side buttons - camera and voice recorder no longer work, and I am unable to connect to the internet as the o2 settings were wiped, and they are unable to provide me with the manual details).
If this is possible, then great... if not, then I'll have to make do really (unless someone can offer assistance on the problems above?).
Oh just for reference, I used the guide on this forum to upgrade to WM 2005, so you can see the exact process I went through.
Thanks to anyone who is able to help.
Click to expand...
Click to collapse
Why don't you use the diamond rom1.2 from this site? it'snan o2 rom that works very well.
I've tried searching for the diamond 1.2 rom on your recommendation, but can't find it.... can you post a link to that topic if poss? *begs*
SpasmicPuppy said:
I've tried searching for the diamond 1.2 rom on your recommendation, but can't find it.... can you post a link to that topic if poss? *begs*
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=18287
w00t! thanks dude ur a star!
Hi Everybody,
I was trying a trial version of TodayX and while I was playing around with it, I noticed that the "Messaging" today item is not there anymore. The "No new messages" has disappeared and also when I get a new SMS, the Today item does not appear either.
Thanks.
RE
Can you s it from setting -> today -> items and check on "messaging" or it completely lost?
No it is completely gone
Hi cornelius, thank you for replying. No, it has completely disappeared, even from the today items menu. I am an experienced user and have some development skills and I even tried to look into the registry to try to find what is missing, but no luck so far...
backup..... HardReset.... ( i'm an experienced user too , or u can say...expert , but it's about loosing time searching for an answer ...that's why Hreset exits :twisted: )
Sorry
I'm sorry sandmik, i didn't mean it, it's difficult to know if someone newbie ( Like me actually ) , or experienced, just want to help.
I think xeon right better to hard reset your device. If you wish you can do something like me, as leaner i always want to know, when i have to hard reset because of something, I record my registry ( For system not S/W ) and see what difference whit fresh one....
Good luck....
Hi again
Hi cornelius. I did not mean any insult to you, I am greatful for you trying to help, it is just I wanted to save sometime. I'd rather not hard reset because I want to use the software TodayX and If I hard reset and install it I might have this problem again, I'd rather find a solution which should be something in the registry. And I also contacted the developers but they did not answer. If someone can send me a dumpe of their PDA2k registry or maybe search for the work "Messaging" and just send me a dump of this information, that would be great. Thanks in advance.
Regards.
Don't worry
Hi sandmik, don't worry, no hurt feeling, but i put my highest respect on you, you're experience but don't arrogant, my respect. OK, i'll do my best to help you. do you know some suspicious area? if no that's ok, i'll explore my registry to find out. Give me 1/2 days, i really want to help you, once again my highest respect 4 you. Good luck.
Fixed
Dear Guys,
I did it, I simply borrowed the BlueAngle of a friends of mine and got these registry entries:
REGEDIT4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\"Messaging"]
"DLL"="tmailutl.dll"
"Flags"=dword:00000000
"Options"=dword:00000000
"Enabled"=dword:00000000
"Order"=dword:00000001
"Type"=dword:00000004
"Selectability"=dword:00000002
I guess this solution is much better than hardreset :idea:
And thanks for your efforts cornelius.
Late
Hey.. you've solve it
im late about few minute ???
but great to hear it....
Question
Sorry, but i hink i need to known did TodayX slow down your XDA?
Hi all,
I am desperate to video call my grand dad before he dies. Its been a while since i have been home and flashed my dads trinity. I remember it was kamba rom.
He tells me that he doesnt have a video call soft key and when i call him, the call drops straight after picking up, or he tells me he doesnt recive my ring when i call him with a video call.
Please could someone post me a cab which i can simply tell him to click on in file explorer to install.
I really appricate your replies.
Regards,
Jason
jasonchiu said:
Please could someone post me a cab which i can simply tell him to click on in file explorer to install.
I really appricate your replies.
Regards,
Jason
Click to expand...
Click to collapse
Hi Jason, I'm posting this from my Trinity, so it's a little difficult researching, but I think you'll find what you need on this post: http://forum.xda-developers.com/showthread.php?t=371201
I hope this helps, and say Hi to your Grandfather from all of us here at XDA. I'm truly sorry for your pain and heartache , I hope your lil Trinity will help.
Ok guys, i need help.... I saw a LOT of threads regarding this issue, but I think i'm blonde, because i can't seem to make it work.... :-/
I'm with Rogers Canada and I just bought a HTC S620 unlocked with windows moble 6.... I see the number of the person calling, but not his name (and I do pay to get this service)
I know I can make it work by changing the values of the registry key, as I have read a couple of times in other forums, but... this is where i'm totally lost....
I'm on MAC, so I use Missing Sync to synchronize my phone, not Active Sync.... I tried downloading Mobie Registry Editor, as well as PHM Reistry Editor, but it does not seem to work (or i'm not doing the right thing...!)
Can anybody please tell me what i need to do (with a LOT of details LOL)
thanks a lot
Vee
veerules said:
Ok guys, i need help.... I saw a LOT of threads regarding this issue, but I think i'm blonde, because i can't seem to make it work.... :-/
I'm with Rogers Canada and I just bought a HTC S620 unlocked with windows moble 6.... I see the number of the person calling, but not his name (and I do pay to get this service)
I know I can make it work by changing the values of the registry key, as I have read a couple of times in other forums, but... this is where i'm totally lost....
I'm on MAC, so I use Missing Sync to synchronize my phone, not Active Sync.... I tried downloading Mobie Registry Editor, as well as PHM Reistry Editor, but it does not seem to work (or i'm not doing the right thing...!)
Can anybody please tell me what i need to do (with a LOT of details LOL)
thanks a lot
Vee
Click to expand...
Click to collapse
Did you imported the contacts from your simcard to the contacts in the phone ?
I think that will help.
Yeah, the name display appears when one of my contact is calling, that's not a problem, but I want to have the name displayed when it's someboby OUTSIDE my contact list who's calling.... The number of the person appears, not his / her name (i do pay for this service and the name did appear with my old phone).... :-/
veerules said:
Yeah, the name display appears when one of my contact is calling, that's not a problem, but I want to have the name displayed when it's someboby OUTSIDE my contact list who's calling.... The number of the person appears, not his / her name (i do pay for this service and the name did appear with my old phone).... :-/
Click to expand...
Click to collapse
Your service might not support that so your name will not show up. It only shows up if it is in your contact... Many cell phone providers do not have this option....
Mine does I am 100% sure... and i have read on many forums that since this phone is unlocked and not "officially" supported by Rogers, I need to modify the registry in order for the name to be displayed....
check this thread....http://forum.xda-developers.com/archive/index.php/t-367381.html
i just can's seem to figure out how to edit the registry, especially since i'm on mac...
veerules said:
Mine does I am 100% sure... and i have read on many forums that since this phone is unlocked and not "officially" supported by Rogers, I need to modify the registry in order for the name to be displayed....
check this thread....http://forum.xda-developers.com/archive/index.php/t-367381.html
i just can's seem to figure out how to edit the registry, especially since i'm on mac...
Click to expand...
Click to collapse
The reg edits you pointed to seems as if no one got it to work anyway from what just read and i did read every link off and more.
This quote seems to make sense:
NotATreoFan:
If it works on the stock Rogers ROM, but not any others, one can conclude Rogers has some special software baked into their OEM ROM.
stylez said:
The reg edits you pointed to seems as if no one got it to work anyway from what just read and i did read every link off and more.
This quote seems to make sense:
NotATreoFan:
If it works on the stock Rogers ROM, but not any others, one can conclude Rogers has some special software baked into their OEM ROM.
Click to expand...
Click to collapse
Actually Stylez I am using Ricky and your Rose 1.5 ROM and Rogers Name Display seems to be working with this version. I was never able to get it to work with the orginal WM 6.1 ROMs but it tis working in the Rose ROM.
For those who don't know Rogers Name Display is basically Caller ID for your cell. It will display the name of the caller even if they are not one of your contacts as long as the Rogers network can figure out who the caller is.
goraps said:
Actually Stylez I am using Ricky and your Rose 1.5 ROM and Rogers Name Display seems to be working with this version. I was never able to get it to work with the orginal WM 6.1 ROMs but it tis working in the Rose ROM.
Click to expand...
Click to collapse
Thanks for that, seems like he needs to go for Rose then
I was only going on reading all the threads associated to the link provided.
little-reminder: technologically-challenged person here!! the hell is a "Rose" and how / where d I get this??? and p.s. Vee is a she, by the way
veerules said:
little-reminder: technologically-challenged person here!! the hell is a "Rose" and how / where d I get this??? and p.s. Vee is a she, by the way
Click to expand...
Click to collapse
Rose is an s740 to which now has it's ROM ported to the s620, Rose can be found im my sig, also NRG has the original available.
The guide to flashing is in sig too, also sorry about the confusion over gender
would by any chance have the link to the Rose ROW, the one I found and downloaded gives me an error message saying that a file is corrupted and it stopped the upgrade at 4% (thank god the phone still works....!) thanks a lot
veerules said:
would by any chance have the link to the Rose ROW, the one I found and downloaded gives me an error message saying that a file is corrupted and it stopped the upgrade at 4% (thank god the phone still works....!) thanks a lot
Click to expand...
Click to collapse
If you look @ sig click Rose ROM link then go to the bottom of post one there is a little bit about how to flash & 3% and a link to the files to rectify this
IT WORKS!!!!!!!!!!!!!!
Thank you sooooo much, now I get to see both the name AND the phone number
AWESOME
And the design is much better as well! If any of you ever come to Montreal and you need photos, gimme a call (www.veephoto.com) thanks again!!
veerules said:
IT WORKS!!!!!!!!!!!!!!
Thank you sooooo much, now I get to see both the name AND the phone number
AWESOME
And the design is much better as well! If any of you ever come to Montreal and you need photos, gimme a call (www.veephoto.com) thanks again!!
Click to expand...
Click to collapse
Hope goraps can answer that one as i'm not a Rogers user as you could probably grasp from previous comments lol, glad you like the ROM, just want to say very impressive photo's
I did some searching around regarding this but could not come up with any final conclusions regarding this issue. I'm posting this on behalf of a friend of mine who has a Dash. I know it's possible to set up ppcs to have Japanese input (i've set up my tilt to do so) but can this be done on a smartphone?
If anyone has any feedback regarding this that would be a great help! Thanks!
dantegl36 said:
I did some searching around regarding this but could not come up with any final conclusions regarding this issue. I'm posting this on behalf of a friend of mine who has a Dash. I know it's possible to set up ppcs to have Japanese input (i've set up my tilt to do so) but can this be done on a smartphone?
If anyone has any feedback regarding this that would be a great help! Thanks!
Click to expand...
Click to collapse
Yup its posible I've done it before my dash.
with english and japanese/chinese characters it was a .cab file that I downloaded from some company I delet it the file some time ago because I have the new rom from kavana that has english/chinese so I din't think I would need it anymore. The only proble I had was that it took alot of memory from the phone.
Hahahahaha sorry I cant post it. you should look for it better if you can't find it I think I have the download link bookmark on my friends PC and see if I can share it....
If you could post that that would be great. I've searched for some time and have had no luck finding it. When you installed it were you still able to input with english characters as well? I'm not familiar with how smartphones work.
Anyone else know if this is possible?