Hi,
Ive installed S2U2 and its a great locking tool. I only have one problem with it. I use Shell 3.0 and when I get a missed call, call, msg or email it shows up on the S2U2 screen but once I unlock the phone, Shell 3.0 doesnt show that I have anything. I can only see that I have something on the taskbar...
Is this normal or is there something I can do?
Thnx
same prob
i got the same problem had to go back to the old s2u2
Related
I have upgraded my Hermes to WM6 and wanted to start locking the keypad.
The built in Device lock is fine, however I want this to automatically lock the device after 5 minutes.
I know there is a more advanced lock that can be activated after a period of time but I don't want to enter a 4 digit pin.
Are there any custom apps out there capable of performing this task?
Thanks
Mark
You could try the "Slide 2 Unlock" app posted >HERE<. That looks like it'll do what you're after.....
HTH,
Mark.
phoneAlarm
Ok, tried this app and like it... but...
I believe I have found a issue with this application when using phoneAlarm on my Hermes WM6..
I currently have phoneAlarm configured to alert me 30 times when I have a text message or missed call. This will continue to alert me until it has done it 30 times or I hav read the text etc..
What I have found since installing Slide2Unlock is that I don't get ANY alerts now.
Is there a registry setting that will get around this problem or is it a restrictions in the application?
Thanks
Mark
Voicemail Indicator...
Is there a registry setting that allows you to turn on a voicemail indicator on the screen? That would be a nice addition.
By the way, this is a coooool app! Thanks for the effort and bring this to the masses.
deenice said:
Is there a registry setting that allows you to turn on a voicemail indicator on the screen? That would be a nice addition.
By the way, this is a coooool app! Thanks for the effort and bring this to the masses.
Click to expand...
Click to collapse
Once you get a voicemail, the indicator comes on. If you don't have any voicemails (and texts or e-mails for that matter), then no icon shows up.
mdavenport said:
Ok, tried this app and like it... but...
I believe I have found a issue with this application when using phoneAlarm on my Hermes WM6..
I currently have phoneAlarm configured to alert me 30 times when I have a text message or missed call. This will continue to alert me until it has done it 30 times or I hav read the text etc..
What I have found since installing Slide2Unlock is that I don't get ANY alerts now.
Is there a registry setting that will get around this problem or is it a restrictions in the application?
Thanks
Mark
Click to expand...
Click to collapse
Not sure if this is applicable, but I had a problem with Voice Command not waking up when I pressed my bluetooth with this app. I found that by disabling the autosuspend since I had it set to come on automatically when the phone goes into hibernation (set through the battery options), it would work again.
ie: Autostart=1
BlankScreen=1
IdleStart=0
HardRoc said:
Once you get a voicemail, the indicator comes on. If you don't have any voicemails (and texts or e-mails for that matter), then no icon shows up.
Click to expand...
Click to collapse
Tested this out last night by calling myself and leaving a voicemail. The only indicators on the IPhone-esque screen were 'text msg' and 'missed calls' counts. Maybe I don't have something configured properly.
thx
Hi all,
I hace a problem with the caller id, everytime i have an incoming call, i have to press call status to find out who is calling, and once i press that tab, i can only see the last person who called or i called the last time, just when i answer the call can i cantually see the name on the screen. Anyone knows whats going one? I have installed the slide to unlock but i never use it.
trederk said:
Hi all,
I hace a problem with the caller id, everytime i have an incoming call, i have to press call status to find out who is calling, and once i press that tab, i can only see the last person who called or i called the last time. Anyone knows whats going one? I have installed the slide to unlock but i never use it.
Click to expand...
Click to collapse
You've written the solution for your problem. If you never use slide2unlock just uninstall it. That's causing your problem...
Problem solved, thanks.
I now have a similar problem, but it started after i uninstalled slide to unlock ..
with S2U i used fullscreen callerID ( built in the program - i used version 1.0 )
when someone calls, my phone rings but stays at the password ( numeric ) screen.
is there a registry key to fix this
??
This tool acts like a screen locker during all call.
From start of dialing until call ended.
It locks only screen and does not turn off the screen.
This one is very useful to see how call going but dont have any troubles about accident screen taps. And every moment you can unlock screen to press something. Hardware buttons does not locked.
Warning
This util hooking touch screen driver.
So you need first install SDKCERTS.CAB from attach
Also, if something will wrong with this hooking, you can return full functionality to touchscreen only by disabling tool touchscreen driver.
You can do it, using PC tool pregutil from XdaUtils.
You need to make ActiveSync connection with phone and then run:
Code:
pregutl.exe -d HKLM\HARDWARE\DEVICEMAP\TOUCH :DriverName
then SoftReset the phone.
In any case, Hard Reset will restore your phone.
Problems with installing driver make that touch screen will not have any response for taps.
I have using this tool on Polaris,Diamond and Blackstone. I have not any problems.
BUT: you are using this tool at YOUR OWN RISK
Instructions
0. Make a backup of your phone
1. Install SDKCERTS.CAB
2. Install HtcExtFun-0.3.cab from attach
3. Soft reset
Features
this tool can:
- Lock screen during all call
- Change alerting of new sms recieved event
- Alert about missed calls and messages
- Turn off screen when call connected
- Vibrate when call connected
- Vibrate every n-th second of the call
- Simple redialing of current call if connection does not reached
- Screen off during dialing when phone flicked. Used g-sensor
- Change SIP (software on screen keyboard) when stylus in/out
All settings in registry. HKCU\Software\HtcExtFun
Registry keys description included in install folder.
To apply changing settings need restart program: run HtcExtFun.exe from install folder and say YES, then run program again.
it looks great man, pls share to us
look nice. plz share
me too........
Yes please share this!
looks very intreseting
Waiting, waiting anxiously!!!
The same with key lock ?
Nice soft but if the key doesn't lock there is still a high chance to press the end call button by accident. There is absolutely no way at all to lock keys as well ?
Thanks
I'm waitng too.
I'm want to try your app.
jeah pls share this =)
it looks very useful for me
waiting here too
Hi. I would like to have it too.
Where did you get it from?
slider
this app is stupid you cant answer the phone with the onscreen slider
Is this for qvga devices too and how stable is this?
arnaud.ja said:
Nice soft but if the key doesn't lock there is still a high chance to press the end call button by accident. There is absolutely no way at all to lock keys as well ?
Thanks
Click to expand...
Click to collapse
Check my sig for the in call key lock
has anyone used this? can someone comment on how it works? been looking for something exactly like this. thanks
in stalled it with the new energy rom rom and had to hard reset my pure. when i had it on another rom it worked just fine. after i installed it i rebooted my phone and it would not even boot. it just got stuck on a black screen.anyone else have the same prob?
leemoss84 said:
in stalled it with the new energy rom rom and had to hard reset my pure. when i had it on another rom it worked just fine. after i installed it i rebooted my phone and it would not even boot. it just got stuck on a black screen.anyone else have the same prob?
Click to expand...
Click to collapse
Darn was just about to use this and then I read this!
Im on MM rom War.
Any1 have success using this?
I tryed it with Duttys 6.5 rom and i had to hard reset. I to wish it would work.
Had a black screen on boot, watched the thread and finally found that it's not compatible with Energy ROM
Too late
I dont know if anybody can help, but the 1 thing that annoys my about my BA/wm6 is when you get a call, the screen is active, so when your geting it out of your bag or wher ever your touching the screen and loading up progs and stuff.
So is there a app or anything that will disable the screen when its ringing? At the moment Im using slide to unlock, and that will disabled the screen when calls are connected but not when ringing???
so why does the software companion make it?
I think to see the contacts incoming call!
Jejeje think about it... it cant be done man
Ive made it a tad better cos theres a option in s2u that ive found and it displays the s2u screen when you get a incomming call with just answer and end buttons at the bottom of the screen. I wanted those buttons gone aswel, but you cant have everything can you. The most important thing that Ive got rid of the today screen when you receive incomming calls.
Hi guys,
I am having a problem with the notification system.
Lets say a person Name "A" sent me a sms, the phone will ring and the light blinks if i did not attend to it.
However the problem starts whenever I replied "A" but left the phone in the TF3D threaded msg screen with "A". After sometime the phone goes to standby. But when "A" replies my msg again, they phone only vibrates and does not ring. The Yellow Led does not blink as well.
I am currently using a stock ROM and i am not sure if you guys experience this as well.
This is Rather annoying as most of the time after replying a person's sms, i would just hit the standby button straight away without bother exiting the threaded sms screen. But if i do that, the next sms that comes in from the same person will not ring or trigger the LED.
I am not sure if this problem has been posted and fix, but after many days of searching i cant seem to find a solution for it.
Help Pls!
i dont know wither it is a problem, ... but my guessing is that if you left the threaded SMS open, than the rom will interpret it as if you saw the SMS (because you are already opening the conversation)
hi thanks for the reply, i have been guessing the same thing. However this is still a problem as it did not happen in the windows threaded msg screen, it ONLY happens in the new TF3D threaded msg screen.
Can any1 help??
Already being discussed:
http://forum.xda-developers.com/showthread.php?t=606140