Related
Ane1 has already dumped original Italian HTC Rom?
Before to dump new WWE rom i would like to have the chance to go back to my original italiann rom.
Thanks
dennydb said:
Ane1 has already dumped original Italian HTC Rom?
Before to dump new WWE rom i would like to have the chance to go back to my original italiann rom.
Thanks
Click to expand...
Click to collapse
I'd like to have the same before starting try the WWE new releases...
I would like to see an italian rom too.
I just upgraded the diamond rom to 1.37 and it's a lot faster but it's in english
However it's not a big problem....sometimes the translation is worse than the original.
When I will have some spare time I will start to learn how to cook a rom
thor486 said:
I would like to see an italian rom too.
I just upgraded the diamond rom to 1.37 and it's a lot faster but it's in english
However it's not a big problem....sometimes the translation is worse than the original.
When I will have some spare time I will start to learn how to cook a rom
Click to expand...
Click to collapse
Which version do you've installed? 404 ot 707? I'm thinking to upgrade, but without an official Italian ROM to use to go back....
It's great request! i'm searching an italian rom for upgrade my diamond!
ciao ragazzi i have a diamond too with WWE and i am waiting for an italian ROM...at the moment i an using the Elite1.0 based on 1.35.404 and it is pretty much faster then 1.34..
dennydb said:
Ane1 has already dumped original Italian HTC Rom?
Before to dump new WWE rom i would like to have the chance to go back to my original italiann rom.
Thanks
Click to expand...
Click to collapse
Can you backup your rom?...... You can find more info using the WIKI....
flaviopac said:
Can you backup your rom?...... You can find more info using the WIKI....
Click to expand...
Click to collapse
i've got original ita rom too but i cannot find an easy explanation on how dump diamond rom
itsutils download this
connect you diamond aat your pc insert this comand in prompt dos
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
and you have the dump your diamomd internal storage
Don't make things harder than they are. I have succesfully dumped a Diamond device earlier. Watch closely:
210.75M (0xd2c0000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 117.13M (0x7520000) Part02
| 86.13M (0x5620000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
The disk name is not DSK1, but DSK1:! So, the correct command would be:
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
original post here
i got this error message!!
Could not update itsutils.dll to the curren
try restarting your device, or restart acti
or maybe your device is application-locked.
dennydb said:
i got this error message!!
Could not update itsutils.dll to the curren
try restarting your device, or restart acti
or maybe your device is application-locked.
Click to expand...
Click to collapse
first whit regeditor you need change this in your diamod:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
Ok ..it's working..
part00.raw is in my pc HD and it-s only 2,688kb.
NOw i would like to understand how to backup other partitions and how to join them for a flashed rom.
dennydb said:
Ok ..it's working..
part00.raw is in my pc HD and it-s only 2,688kb.
NOw i would like to understand how to backup other partitions and how to join them for a flashed rom.
Click to expand...
Click to collapse
you have a pm
error again:
pdocread -w -d DSK1: -b 0x800 -p Part03 0 0x5620000 Part03.raw
CopyTFFSToFile(0x0, 0x5620000, Part03.raw)
ERROR: ITReadDisk : read 00000000 bytes - The storage control block address is i
nvalid.
caxio said:
itsutils download this
connect you diamond aat your pc insert this comand in prompt dos
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
and you have the dump your diamomd internal storage
Don't make things harder than they are. I have succesfully dumped a Diamond device earlier. Watch closely:
210.75M (0xd2c0000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 117.13M (0x7520000) Part02
| 86.13M (0x5620000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
The disk name is not DSK1, but DSK1:! So, the correct command would be:
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
original post here
Click to expand...
Click to collapse
Thanks a lot, but after 1 sec in the command i've got:
C:\itsutils>pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
Copying C:\itsutils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked.
lightman3dd said:
Thanks a lot, but after 1 sec in the command i've got:
C:\itsutils>pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
Copying C:\itsutils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked.
Click to expand...
Click to collapse
you need this registry hack
first whit regeditor you need change this in your diamod:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
Edit/Delete Message
caxio said:
you need this registry hack
first whit regeditor you need change this in your diamod:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
Edit/Delete Message
Click to expand...
Click to collapse
got it thanks...and now?
dennydb said:
Ok ..it's working..
part00.raw is in my pc HD and it-s only 2,688kb.
NOw i would like to understand how to backup other partitions and how to join them for a flashed rom.
Click to expand...
Click to collapse
me too...i'd like to create the default ita rom
for first read the right andress whit pdocread.exe -l and after dump the raw file
the instruction are in the post:
this example have the raw andress for nld rom not for italian
Originally Posted by caxio
itsutils download this
connect you diamond aat your pc insert this comand in prompt dos
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
and you have the dump your diamomd internal storage
Don't make things harder than they are. I have succesfully dumped a Diamond device earlier. Watch closely:
210.75M (0xd2c0000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 117.13M (0x7520000) Part02
| 86.13M (0x5620000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
The disk name is not DSK1, but DSK1:! So, the correct command would be:
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
original post here
Done.. i got 4 raw part of my rom.
And now?
Before going for a new ROM I wanted to first backup mine.
My actual ROM version is 1.37.406.1 FRE.
Is the dumping process the same for all HTC models?
There are a LOT of threads regarding backup on the diamond.
Search is also your best friend.
Dump the ROM:
Code:
C:\bin>pdocread.exe -l
210.38M (0xd260000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 106.38M (0x6a60000) Part02
| 96.50M (0x6080000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle e6932666 3.75G (0xf0000000)
handle [COLOR="red"]e7cae8da[/COLOR] 96.50M (0x6080000)
handle [COLOR="blue"]c7db27be[/COLOR]106.38M (0x6a60000)
handle [COLOR="green"]a7db279a[/COLOR] 4.38M (0x460000)
handle [COLOR="orange"]67db2752[/COLOR] 3.12M (0x31f000)
[...]
C:\bin> [B]pdocread.exe -w -h [color="orange"]0x67db2752[/color] -b 0x800 0 0x31f000 Part00.raw[/B]
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
C:\bin> [B]pdocread.exe -w -h [color="green"]0xa7db279a[/color] -b 0x800 0 0x460000 Part01.raw[/B]
CopyTFFSToFile(0x0, 0x460000, Part01.raw)
C:\bin> [B]pdocread.exe -w -h [color="blue"]0xc7db27be[/color] -b 0x800 0 0x6a60000 Part02.raw[/B]
CopyTFFSToFile(0x0, 0x6a60000, Part02.raw)
C:\bin> [B]pdocread.exe -w -h [color="red"]0xe7cae8da[/COLOR] -b 0x800 0 0x6080000 Part03.raw[/B]
CopyTFFSToFile(0x0, 0x6080000, Part03.raw)
Dump the bootloader:
Code:
C:\bin> [B]pmemdump.exe 0xa8000000 524288 SPLdumped.nb[/B]
CopyProcessMemoryToFile(00000042, a8000000, 00080000, SPLdumped.nb)
Enjoy
Thanks a lot pof, but how do I use that?
adwinp said:
There are a LOT of threads regarding backup on the diamond.
Search is also your best friend.
Click to expand...
Click to collapse
Could you please link to one because I failed to find any personally? That would really help. Thanks a lot.
Hay the dump of part 02 is taking a long time for my device !?!?.. is it generally like that !?!?
How can i do this, can o give a little lesson about this???
I appreciate a lot
pof said:
Dump the ROM:
Code:
C:\bin>pdocread.exe -l
210.38M (0xd260000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 106.38M (0x6a60000) Part02
| 96.50M (0x6080000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle e6932666 3.75G (0xf0000000)
handle [COLOR="red"]e7cae8da[/COLOR] 96.50M (0x6080000)
handle [COLOR="blue"]c7db27be[/COLOR]106.38M (0x6a60000)
handle [COLOR="green"]a7db279a[/COLOR] 4.38M (0x460000)
handle [COLOR="orange"]67db2752[/COLOR] 3.12M (0x31f000)
[...]
C:\bin> [B]pdocread.exe -w -h [color="orange"]0x67db2752[/color] -b 0x800 0 0x31f000 Part00.raw[/B]
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
C:\bin> [B]pdocread.exe -w -h [color="green"]0xa7db279a[/color] -b 0x800 0 0x460000 Part01.raw[/B]
CopyTFFSToFile(0x0, 0x460000, Part01.raw)
C:\bin> [B]pdocread.exe -w -h [color="blue"]0xc7db27be[/color] -b 0x800 0 0x6a60000 Part02.raw[/B]
CopyTFFSToFile(0x0, 0x6a60000, Part02.raw)
C:\bin> [B]pdocread.exe -w -h [color="red"]0xe7cae8da[/COLOR] -b 0x800 0 0x6080000 Part03.raw[/B]
CopyTFFSToFile(0x0, 0x6080000, Part03.raw)
Dump the bootloader:
Code:
C:\bin> [B]pmemdump.exe 0xa8000000 524288 SPLdumped.nb[/B]
CopyProcessMemoryToFile(00000042, a8000000, 00080000, SPLdumped.nb)
Enjoy
Click to expand...
Click to collapse
I'm sorry to insist but I've really researched the forum and can't find something clear enough.
To follow my isntructions, you need a working Activesync / WMDC connection with the diamond, and itsutils installed on your windows PC. The dump of part02 and part03 takes a while, because those are big files, this is normal.
Once you have the *.raw files, you can use Part01.raw (XIP) and Part02.raw (OS) into a flashable ROM using any ROM kitchen that supports it (either diamond specific, or kaiser's kitchen will work also).
What should I so with the itsutils files? Which should I run? Could you please give a step-by-step explanation of how the dump actually goes? That would be great. Thanks again.
Hello pof!
I have just dumped my radio but TouchFlo 3D still very sluggish. What is the next step?
P.S. hello, mate, glad to see you posting in Diamond forums
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As I understand, part03 is the RAM that contains your personal data like contacts and SMS.
So it isn't realy needed to rebuild the ROM.
But what's part00 ?? A second XIP part ?
Thanks
Your a legend POF.
Extracted SPL 1.38 from Telstra DIAM130 now have a backup in order to load a hard SPL.
Thank you
Error dumping ROM
Hey everyone!
I downloaded and ran (from the command prompt) "pdocread.exe -l". The following error occurred:
"Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
or maybe your device is application-locked"
Hopefully someone can tell me what to do next, I beleive the problem lies in the "application-locked"-thing. I can see the .dll on my device in explorer, but I can't see it when I try to use it in the "Programs" list with "TF3D Config" (I am able to see other .dll files in the "windows" directory. Furthermore, I currently have a Vodafone branded ROM version (of which I would like to have a backup before flashing it)
Same problem here.
Using Vista 64Bit - Windows mobile device center.
I really want to Dump my OS so I fanlly can flush a new rom!!! PLZ help soon.
Thx,
CySlider
Did you try enablerapi for itsutils.dll error ?
You can get it from
http://forum.xda-developers.com/showpost.php?p=2306937&postcount=11
Unfortunately this does not work. It gives me this error:
Config failed (0x80070005): Access denied
Try to read here
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
and go to the link on this line
Check this wiki article on information about how to avoid that. Basically you have to modify this registry key, and then softreset using power button:
Thats it!! Thanks a lot BentPovlsen.
To keep it short for others:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
After that it works.
CySlider
pof said:
Dump the ROM:
Code:
C:\bin>pdocread.exe -l
210.38M (0xd260000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 106.38M (0x6a60000) Part02
| 96.50M (0x6080000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle e6932666 3.75G (0xf0000000)
handle [COLOR="red"]e7cae8da[/COLOR] 96.50M (0x6080000)
handle [COLOR="blue"]c7db27be[/COLOR]106.38M (0x6a60000)
handle [COLOR="green"]a7db279a[/COLOR] 4.38M (0x460000)
handle [COLOR="orange"]67db2752[/COLOR] 3.12M (0x31f000)
[...]
C:\bin> [B]pdocread.exe -w -h [color="orange"]0x67db2752[/color] -b 0x800 0 0x31f000 Part00.raw[/B]
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
C:\bin> [B]pdocread.exe -w -h [color="green"]0xa7db279a[/color] -b 0x800 0 0x460000 Part01.raw[/B]
CopyTFFSToFile(0x0, 0x460000, Part01.raw)
C:\bin> [B]pdocread.exe -w -h [color="blue"]0xc7db27be[/color] -b 0x800 0 0x6a60000 Part02.raw[/B]
CopyTFFSToFile(0x0, 0x6a60000, Part02.raw)
C:\bin> [B]pdocread.exe -w -h [color="red"]0xe7cae8da[/COLOR] -b 0x800 0 0x6080000 Part03.raw[/B]
CopyTFFSToFile(0x0, 0x6080000, Part03.raw)
Dump the bootloader:
Code:
C:\bin> [B]pmemdump.exe 0xa8000000 524288 SPLdumped.nb[/B]
CopyProcessMemoryToFile(00000042, a8000000, 00080000, SPLdumped.nb)
Enjoy
Click to expand...
Click to collapse
If I get it right, then the Sizes differ from device to device. this is irritating, since you didn't color those numbers too. First I thaugt they were static.
Here is how I think it should be. correct me if I´m wrong:
Dump the ROM:
Code:
C:\bin>pdocread.exe -l
210.38M (0xd260000) DSK1:
| 3.12M ([COLOR="darkorange"][B]0x31f000[/B][/COLOR]) Part00
| 4.38M ([COLOR="darkgreen"][B]0x460000[/B][/COLOR]) Part01
| 106.38M ([COLOR="darkblue"][B]0x6a60000[/B][/COLOR]) Part02
| 96.50M ([COLOR="darkred"][B]0x6080000[/B][/COLOR]) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle e6932666 3.75G (0xf0000000)
handle [COLOR="red"]e7cae8da[/COLOR] 96.50M (0x6080000)
handle [COLOR="blue"]c7db27be[/COLOR]106.38M (0x6a60000)
handle [COLOR="green"]a7db279a[/COLOR] 4.38M (0x460000)
handle [COLOR="orange"]67db2752[/COLOR] 3.12M (0x31f000)
[...]
C:\bin> [B]pdocread.exe -w -h [color="orange"]0x67db2752[/color] -b 0x800 0 [COLOR="darkorange"][B]0x31f000[/B][/COLOR] Part00.raw[/B]
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
C:\bin> [B]pdocread.exe -w -h [color="green"]0xa7db279a[/color] -b 0x800 0 [COLOR="darkgreen"][B]0x460000[/B][/COLOR] Part01.raw[/B]
CopyTFFSToFile(0x0, 0x460000, Part01.raw)
C:\bin> [B]pdocread.exe -w -h [color="blue"]0xc7db27be[/color] -b 0x800 0 [COLOR="darkblue"][B]0x6a60000[/B][/COLOR] Part02.raw[/B]
CopyTFFSToFile(0x0, 0x6a60000, Part02.raw)
C:\bin> [B]pdocread.exe -w -h [color="red"]0xe7cae8da[/COLOR] -b 0x800 0 [COLOR="darkred"][B]0x6080000[/B][/COLOR] Part03.raw[/B]
CopyTFFSToFile(0x0, 0x6080000, Part03.raw)
Can read now
Cy_the_Slider said:
Thats it!! Thanks a lot BentPovlsen.
To keep it short for others:
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
After that it works.
CySlider
Click to expand...
Click to collapse
Thanks man! This made all the difference. I'm dumping my ROM right now Now, I'm just looking for someone to test it by flashing it... Hopefully someone will try that.
i got my hands on my first diamond so i made a dump:
ROM version:1.37.479.3 WWE
Rom date 06/24/08
Radio Version:1.00.25.03
Protocol version:52.26a.25.09H
CE OS 5.2.19591 (Build 19591.1.1.6)
I uploaded the raw files in case someone needs them
Sorry if not in the right thread, but it's a bit late and i'm running out of battery on my laptop.
pass: "xdadevs" without cuotes.
http://rapidshare.com/files/139086420/diamond.part1.rar.html
http://rapidshare.com/files/139088895/diamond.part2.rar.html
PS: if someone would be kind enough to make theese files into flashable roms, i would appreciate it,
Can someone extract the rom from this dump and convert it to a flashable one ?
I tried to reconstruct a rom for my polaris in the past and almost briked it.
I don't want to repeat that, and i'm eager to test some cooked roms but i need the original rom in case i want to send the device back to Vodafone.
Thanks in advance.
Thanks ravest.
That ROM is the same which I have in my Dimond. But I am beginner in flashing ROMs, so I am supporting you to beg somebody to make a flesheable ROMfrom your dump, and you personally I would like to ask to describe step by step how to do dump of ROM for me. I was reading some HOW TOs, but still I do not understand how to do it.
this is the guide i used for dumping:
http://forum.xda-developers.com/showthread.php?t=412447
and there is also a guide for kaiser where i found the tools needed:
http://forum.xda-developers.com/showthread.php?t=334680
you may also need to install sdkcert and enablerapi on your pda in order to be able to dump those files.
step by step guide:
1. extract itsutils (http://www.xs4all.nl/~itsme/projects/xda/tools.html) to hard drive
2. open command prompt (run "cmd"), go to the folder created above (use cd command)
3. run
pdocread.exe -l
and you will get a list like this:
210.38M (0xd260000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 106.38M (0x6a60000) Part02
| 96.50M (0x6080000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle e6932666 3.75G (0xf0000000)
handle e7cae8da 96.50M (0x6080000)
handle c7db27be106.38M (0x6a60000)
handle a7db279a 4.38M (0x460000)
handle 67db2752 3.12M (0x31f000)
[...]
4. run
pdocread.exe -w -h 0x67db2752 -b 0x800 0 0x31f000 Part00.raw
and you will get a result like:
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
4. run the same command changing the values acordingly
At the end you will have in the same folder 4 files: part00.raw, part01.raw, part02.raw, part03.raw
ravest said:
this is the guide i used for dumping:
http://forum.xda-developers.com/showthread.php?t=412447
and there is also a guide for kaiser where i found the tools needed:
http://forum.xda-developers.com/showthread.php?t=334680
you may also need to install sdkcert and enablerapi on your pda in order to be able to dump those files.
step by step guide:
1. extract itsutils (http://www.xs4all.nl/~itsme/projects/xda/tools.html) to hard drive
2. open command prompt (run "cmd"), go to the folder created above (use cd command)
3. run
pdocread.exe -l
and you will get a list like this:
210.38M (0xd260000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 106.38M (0x6a60000) Part02
| 96.50M (0x6080000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle e6932666 3.75G (0xf0000000)
handle e7cae8da 96.50M (0x6080000)
handle c7db27be106.38M (0x6a60000)
handle a7db279a 4.38M (0x460000)
handle 67db2752 3.12M (0x31f000)
[...]
4. run
pdocread.exe -w -h 0x67db2752 -b 0x800 0 0x31f000 Part00.raw
and you will get a result like:
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
4. run the same command changing the values acordingly
At the end you will have in the same folder 4 files: part00.raw, part01.raw, part02.raw, part03.raw
Click to expand...
Click to collapse
Thanks ravest - good work!
I have to read all paths first, download software and after that I will definitely try.
Thanks again.
up ?
Anyone can help ?
Thanks in advance.
And what do we have to do to the .raw files to make them usable for rom flashing?
Hi, i want to do a backup of my Orange rom, and put other good rom.
R. 1.20 OliNex
G. 52.26 a 25.09
D 1.93.00.00
First i have installed Cert_SPCS.cab and EnableRapi.cab
then
C:\Documents and Settings\LEONIC>C:\bin\pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
C:\Documents and Settings\LEONIC>C:\bin\pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x480000 Part01.raw
CopyTFFSToFile(0x0, 0x480000, Part01.raw)
C:\Documents and Settings\LEONIC>C:\bin\pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x8060000 Part02.raw
CopyTFFSToFile(0x0, 0x8060000, Part02.raw)
C:\Documents and Settings\LEONIC>C:\bin\pdocread -w -d DSK1: -b 0x800 -p Part03 0 0x4b20000 Part03.raw
CopyTFFSToFile(0x0, 0x4b20000, Part03.raw)
C:\Documents and Settings\LEONIC>C:\bin\pmemdump.exe 0xa80000 00 524288 SPLdumped.nb
CopyProcessMemoryToFile(00000042, a8000000, 00080000, SPLdumped.nb)
Click to expand...
Click to collapse
I have to do something more??
Have you read this thread?
Dump Diamond ROM
Windoze9t8 said:
Have you read this thread?
Dump Diamond ROM
Click to expand...
Click to collapse
his first post...bless him
liamhere said:
his first post...bless him
Click to expand...
Click to collapse
Virgin -
Yes I have read the thread Dump Diamond ROM but I don't have the things clear enough. And I wanted to know if with these is enough or I have to do something more.
if its a UK orange diamond then you dont need to dump it ! just download the Rom update ! voila! all you need to do then is to restore the radio and spl which are both available on xdadevs
No, it isn't UK orange, it's the orange rom from Spain. So I have to do something more, or just all???
use the tools in the thread in earlier post and then use a kitchen to rebuild the rom!
put 0001.raw and 0002.raw files produced from thread above in the base rom folder of the kitchen and follow cooking instructions!
you will need to extract the splash from another official orange rom and place in your rom when you come to build the nbh file
its not hard! you just need to read up on it! just search
Thanks I'm going to try!!
Finally! I made impossible !
http://forum.brighthand.com/showthread.php?t=267928 (for os part)
Here are two other parts of memory: http://rapidshare.com/files/220924476/rest.rar.html
Yes, but you didn't tell us how you got the os part (so that others like myself can do this at home, I do have experience in rom cooking).
I post how to create images on brighthand (in my link) I done it via pdocread tool which can be found here in xda wiki, after this you can unpack os image by imgfstodump, and xip via dumprom, after this you can convert it to oem and sys via pkgtoolsbuildos, I'm also not an expert in cooking but spme peple on brighthand say that they will try to cook wm 6.5 now
great man, hope some1 knows how to flash it.
finally something smells from the kitchen
one question: does the rom contains opengl es drivers ?
ahh GREAt how's it going ? Elektrownik, have you managed to upgrade your wm os yet ?
Suspicions
If indeed this is legitimate and truthful, then I commend you friend Many of us have been waiting many months or even a year for this ROM, and we're all very greatful for for all the hard work we assume you've put in on it.
The next step is to provide instructions on how to do it on XDA, as that's where alot of people are waiting, unless you have some objection to that, and also to share it with other cooks who can help bring more advancements and features to our devices now that they're cracked.
If, however, this is fake and you're lying look BoomerCE was, you're a disgrace to this community and should be ashamed of your manipulative actions. (This paragraph does not apply if this is legit).
Noxem, ottoman96
this is not a fake... i'm just not an cooking expert, and noone want help me so it is not fast...
So:
we know now how to dump raw from device, we need pdocread for this, then:
pdocrean -l
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x17f000 Part00.raw
pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x220000 Part01.raw
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x39e0000 Part0.raw
but look first to -l result becouse sizes of patritions can be different, those are for ipaq 214 wwe, if yours are diffrent then you need to corect those 3 lines under -l
part00 is bootloader and hard reset ? i think, it is useless but it can be unpacked via romdump.exe, it contain reset.exe for example which is responsible for hard reset i think, there is also boot.hv
part01 is xip - important can beunpacked to xip folder via dumprom.exe
part02 is imgfs - important - can be unpacked to dump via imgfstodump from imgfs tools
i'm still working on flashing, i'm not sure what image it requried
so first we need to backup full memory from linux (this is describet on handhlets.org) for safe restore in case of bad flashing...
i also was able to create .nb file which look fine, it was hard becouse there is no official image so no nb.payload also...
but i generate it with implantxip.exe tool and was able later pack it to .nb with imgfs tools... now it is time to test it... but i want wait for confirmation from advanced members of xda if my way to create payloads is good, also someone could cook 6.1 or 6.5 rom into dump to easy say if it realy works after flashing...
EDIT: I think that the best solution will be that someone will follow my way from zero and then we can check if the results are the same...
HI
I 'm trying to made an ipaq 214 rom to!
for now i have successfully dump device and rebuild
OEM SYS XIP and romhdr.bin.
my dump is from a french device.
memory adress:
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x17f000 Part00.raw
pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x220000 Part01.raw
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x3a60000 Part02.raw
elektrownik i'm waiting news from you,
to see what we can do to made an ipaq 214 kitchen.
bye
see you
xboxmod said:
HI
I 'm trying to made an ipaq 214 rom to!
for now i have successfully dump device and rebuild
OEM SYS XIP and romhdr.bin.
my dump is from a french device.
memory adress:
pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x17f000 Part00.raw
pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x220000 Part01.raw
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x3a60000 Part02.raw
elektrownik i'm waiting news from you,
to see what we can do to made an ipaq 214 kitchen.
bye
see you
Click to expand...
Click to collapse
xbmod sorry to ask, but did you give up on the Topaz manila port? many thanks if you can give us an update