HELP! Blank screen after showing GSM version during bootup. - P3300, MDA Compact III General

Hi, My atermis not working. It just goes blank after showing the GSM version. I have tried using Flash Update using WWE_3.7.707.1_4.1.13.30_02.69.90_Ship from HTC and the ROM flahsing was successfull but still have still the same problem. Any advice? I can hard reset and go to bootloader mode without any problem.

anyone can help?

Related

Help :( Stuck at Factory Mode.

Help Factory Mode keeps appearing everytime i turn off my phone Currently using N7100 4.1.2 Android Revolution HD. Battery pull doesnt work, also tried reflashing the rom but no luck. Anyone can help me?
Check this out: http://galaxynote2root.com/galaxy-n...-factory-mode-on-galaxy-note-2-phone-csc-pda/

Strange problem Screen goes blank please help me its really serious please

Please guys help me i have flashed this cm 11 after that now my whs boot successfully but blank screen is showing.
all functions are working like call messages etc but displaying only blank screen.
i have also flashed latest RUU but nothing happend except boot loop as phone boot to HTC logo screen and then blank screen comes and phone reboots itself.
so i again flashed CWM and again CM11 rom now my whs boot completely but again blank screen is showing.On other stock ROMs phone goes reboot loop NOT boot loop like stuck on HTC logo and looping that logo etc.
My CWM is working
bootloader is locked but ship s-off
hboot is latest
radio is 7.57.39.10M
in bootloader or CWM phone's display works well.
Pease help me sorry for bad English
You should have done a backup in CWM before flashing. All I can humbily recommend is that you try wiping data, cache, dalvik cache and make a clean install. If, as you said, you screen works well, any 'safe' (stable') ROM should work. Otherwise, it's a hardware problem.
Z4Zeeshan said:
Please guys help me i have flashed this cm 11 after that now my whs boot successfully but blank screen is showing.
all functions are working like call messages etc but displaying only blank screen.
i have also flashed latest RUU but nothing happend except boot loop as phone boot to HTC logo screen and then blank screen comes and phone reboots itself.
so i again flashed CWM and again CM11 rom now my whs boot completely but again blank screen is showing.On other stock ROMs phone goes reboot loop NOT boot loop like stuck on HTC logo and looping that logo etc.
My CWM is working
bootloader is locked but ship s-off
hboot is latest
radio is 7.57.39.10M
in bootloader or CWM phone's display works well.
Pease help me sorry for bad English
Click to expand...
Click to collapse
Method 1:
Wipe everything except for SDCard.
Flash latest Stock ROM.
Wipe everything again.
Reboot.
Method 2:
Wipe everything except for SDCard.
Install a CM10.1 ROM.
Wipe cache/dalvik-cache.
Reboot.
Nothing happened
GeeteshK said:
Method 1:
Wipe everything except for SDCard.
Flash latest Stock ROM.
Wipe everything again.
Reboot.
Method 2:
Wipe everything except for SDCard.
Install a CM10.1 ROM.
Wipe cache/dalvik-cache.
Reboot.
Click to expand...
Click to collapse
:crying:
tried your methods all in vain please reply
Z4Zeeshan said:
Please guys help me i have flashed this cm 11 after that now my whs boot successfully but blank screen is showing.
all functions are working like call messages etc but displaying only blank screen.
i have also flashed latest RUU but nothing happend except boot loop as phone boot to HTC logo screen and then blank screen comes and phone reboots itself.
so i again flashed CWM and again CM11 rom now my whs boot completely but again blank screen is showing.On other stock ROMs phone goes reboot loop NOT boot loop like stuck on HTC logo and looping that logo etc.
My CWM is working
bootloader is locked but ship s-off
hboot is latest
radio is 7.57.39.10M
in bootloader or CWM phone's display works well.
Pease help me sorry for bad English
Click to expand...
Click to collapse
Have tried wiping and flashing while your bootloader is unlocked??
csoulr666 said:
Have tried wiping and flashing while your bootloader is unlocked??
Click to expand...
Click to collapse
its s-off so no need to unlock but if you suggest me how can i unlock bootloader in this situation now. then i can try this also.
flashing RUU ends up in bootloop
Z4Zeeshan said:
its s-off so no need to unlock but if you suggest me how can i unlock bootloader in this situation now. then i can try this also.
flashing RUU ends up in bootloop
Click to expand...
Click to collapse
If the bootloader shows ****LOCKED****, then you don't need to flash the RUU just continue to step one
nothing happened
csoulr666 said:
If the bootloader shows ****LOCKED****, then you don't need to flash the RUU just continue to step one
Click to expand...
Click to collapse
i unlocked bootloader and tried what you mentioned but all in vain.
stock rom always stuck on bootloop and custom rom shows nothing after booting, even on droidScreen application its shows blank screen. that mean hardware is fully working but nothing is showing.
i have tried all the recoveries given in forum and Stock recoveries also but same problem.
Is there any solution...???
Z4Zeeshan said:
i unlocked bootloader and tried what you mentioned but all in vain.
stock rom always stuck on bootloop and custom rom shows nothing after booting, even on droidScreen application its shows blank screen. that mean hardware is fully working but nothing is showing.
i have tried all the recoveries given in forum and Stock recoveries also but same problem.
Is there any solution...???
Click to expand...
Click to collapse
Take a photo of the bootloader and if possible a video of what happens when you flash and then open a custom recovery

S4 mini GT-I9190 Bootloop

Hi there. Yesterday I got a s4 mini gt-i9190 to see if I could fix a bootloop. The cel turn on, vibrates, displays the phone model and goes no further. Then restarts. Can't enter recovery mode, but can enter download mode, so I tried installing the stock firmware from SamMobile. I've flashed 3 firmwares SamMobile corresponding to Argentina:
I9190UBUBMK2_I9190UUBBMK1
I9190UBUBNA1_I9190PSPBNA2
I9190UBUBNA3_I9190PSPBNA3
and has not been fixed. Still in bootloop. Any idea to solve it? Thank you.
ddhernandez said:
Hi there. Yesterday I got a s4 mini gt-i9190 to see if I could fix a bootloop. The cel turn on, vibrates, displays the phone model and goes no further. Then restarts. Can't enter recovery mode, but can enter download mode, so I tried installing the stock firmware from SamMobile. I've flashed 3 firmwares SamMobile corresponding to Argentina:
I9190UBUBMK2_I9190UUBBMK1
I9190UBUBNA1_I9190PSPBNA2
I9190UBUBNA3_I9190PSPBNA3
and has not been fixed. Still in bootloop. Any idea to solve it? Thank you.
Click to expand...
Click to collapse
Have you tried a custom recovery and wipe *all* data?
Yes Ive tried. I flashed a Panamá stock 4.4.2 firm and boots. Now Im stuck cause touch doesn't work. Can't choose language at first screen that appears after boot. Volume and power works. Don't know what to do.

Problems when converting back to sense, pls help!!

So i changed to super cid,intalled the 1.54.401.5 firmware through the rebootRUU option did a factory reset but got a red exclamation mark when rebooting.Then i turned the phone off and booted back into fastboot,flashed twrp but for some reason i cant boot into twrp!!It gets stuck in the HTC logo where it says entering recovery!Any help is epreciated Edit:was using the wrong firmware found the correct one problem solved

Help!!! stuck in decryption unsuccessful

Hello, my phone htc m8 is stuck on decryption unsuccessful and reboots. I have searched the forums and tried everything so far. So first of all the phone is stock with no mods. I have tried to go in the fastboot menu and tried to do a factory reset, nothing happens and it cycles to the decrypt phone. I have also tried to use the recovery and again it boots up to the same menu. I have downloaded the RUU and have tried to restore that way using the fastboot, as soon as it reboots and says waiting for bootloader it resets to the same decrypt screen and the status on the RUU says it cannot connect to phone. So if anyone has any advice that could help that would be great thanks!

Categories

Resources