If yes, what is the port used by the inbuilt GPS ? I need to reset the port to receive gps data
com4 i think
Robin malaysia said:
If yes, what is the port used by the inbuilt GPS ? I need to reset the port to receive gps data
Click to expand...
Click to collapse
Yes, it is dopod P800W.
Make sure:
Setting->System->GPS->Program is set to COM4
Setting->System->GPS->Hardware is set to None
Setting->System->GPS->Access "Manage GPS automatically" is checked
configure your GPS program to use COM4
Thanks for that
when I set this as above, in GPSgate 2.0 I still get "Running" and "No data coming in"
any ideas anyone ?
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Astier said:
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Click to expand...
Click to collapse
check out your settings in active sync, ive had this problem a few times and when i change the settings to work in the config page of active sync, the problem goes away.
Found, thanks
On the PC in ActiveSync:
File/Connection settings/ This computer is connected to ... Internet !
Jean-Jacques
Could you have it set to Automatic?
I had the same issue, solved it with this post http://forum.xda-developers.com/showthread.php?t=321471
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly
If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...
Did any of these methods work? did you do something else to make it work??
This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?
yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'
Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K
lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K
start->settins->USD to PC-> Enable advanced network functionality
Oh, OK. I'd already done that! Keep coming in with suggestions though!
I have noticed that some cooked roms have a utility to disable data connections. Does anyone have this in a CAB file that can be installed.
Thanks in advanced for any help.
Brad.
it's "NoData" app.
Code:
http://forum.xda-developers.com/showthread.php?t=467813
you can find it there
cheers,
Hi there, I am using CM7 RC1v2 on my motorola defy. I am facing a problem which whenever i connect my phone to windows using phone portal the usb tether cnt be checked. But when i connect using "charge only" the things become available again but i still could not connect. Anybody face this problem and can help me to solve it? Thx very much!
Phone portal run on specific IP number and it uses different port and this explain why USB tether won't run.
I'm using it and here's my steps.
AFAIK, the pc required the USB tether driver for it to run properly. It should automatic install of the required driver. Once the driver is installed, you could perform a few steps here. I'm using Windows 7
1) Goto Control Panel - Network and Sharing Center - Change Adaptor settings.
2) Disable any active Local Area Connection if there are any of them running
3) Enable the one USB tether(it might already enabled by default but you could double check it).
4) It will auto verifying and connect once it done verified.
5) Start your internet browser and enjoy(you may need to do: Internet Option - Connections - Lan Settings - Unchecked proxy server .
farsight73 said:
Phone portal run on specific IP number and it uses different port and this explain why USB tether won't run.
I'm using it and here's my steps.
AFAIK, the pc required the USB tether driver for it to run properly. It should automatic install of the required driver. Once the driver is installed, you could perform a few steps here. I'm using Windows 7
1) Goto Control Panel - Network and Sharing Center - Change Adaptor settings.
2) Disable any active Local Area Connection if there are any of them running
3) Enable the one USB tether(it might already enabled by default but you could double check it).
4) It will auto verifying and connect once it done verified.
5) Start your internet browser and enjoy(you may need to do: Internet Option - Connections - Lan Settings - Unchecked proxy server .
Click to expand...
Click to collapse
I have tried following ur steps but it still can't work. My pc was able to install all the driver except that when installing MTP USB driver, it failed.