Related
I flashed to the htc release wm 6.1 but accidentally did a foreign version. I flashed it again with the US release and it works fine except the symbols E, D, X, W, S, Z, Q, and A are not working correctly. They input a different symbol.
I went to do the keyboard fix...
"Goto the following registry entry
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty]
There is a key called 'Layout' and it is in Decimal.
The default value of English ROM is 20409, and Chinese ROM is 20404 (both are in hexadecimal)."
...and the value was already 132105 (20409 in decimal)
I went ahead and changed it to 132104 and then back to 132105 but it is still not working.
Is there such a program that would allow me to easily re-map the keyboard?
Any help is appreciated!
schaps advanced config 2
Thanks!
I ended up just finding this fix a little further down the page...
"Issue: When applying a non-cingular ROM to an 8525 its default keyboard is different than the 8525.
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
scfreshy said:
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
Click to expand...
Click to collapse
FIXED sorry for clutter!
The Fix:
[HKLM\SOFTWARE\OEM\Qwerty]
"Layout"=263177 (decimal)"
...it works, but now the keyboard will not light up.
Is this an unrelated problem?
How do I fix it?
No it doesn't fix the problem, any other place in the registry do you know....? Thank you!!
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Greeee said:
Apologies for jumping onto this thread, seems the best place really.
I've just bought a HTC Hermes, and it has WM 6.1 installed, using it on the Orange UK network.
My only problem is, when pressing ! I get @, and when pressing Y i get Z.
I've ensured all language and keyboard options are set to UK, however I just don't seem to be able to change the keyboard map to full UK, although physically the keyboard is correct, just not the SW side of things.
I was just wondering if someone could help me, if you let me know where I need to look, i'll be able to help you, just not used anything MS based for the past 4 years, so its a bit of a foreign object now.
Thank you,
Click to expand...
Click to collapse
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
kareem9nba said:
Good job and thank you in finding this thread and not opening up a new one
Anyhow, have you tried the latest Advance Config Tool v3.3? Try that version and see if it fixes you issue.
Click to expand...
Click to collapse
Hi there,
I'm actually new to Smartphones, and the Tytn / Hermes was going cheaply online (ebay unfortunately), but the phone itself is excellent and is easy to use from back in my windows days.
Most is familiar, but seeing how far Windows can go before I want to switch to Linux.
Where would I get the ACT? Is it downloadable from here as a development tool, or is it online needing payments etc?
Thank you,
greee, u can get it at schaps website here: http://forum.xda-developers.com/showthread.php?t=317070&highlight=advanced
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Greeee said:
galaxys,
I've downloaded the ACT, along with a pocket msn, and neither will install.
Do i need to put them somewhere for it to install correctly? Just i'm only getting access to my memory card.
Thank you,
Click to expand...
Click to collapse
Both should install on main memory.
Are you getting an error when the don't install?
So far kareem, i'm getting an XML output for the ACT, and for Pocket MSN it reports:
Setup Is Not a valid Pocket PC application.
With the ACT, i've no option to install, although the setup file I have was meant to be a cab file.
Thank you,
Scratch all that, got both PocketMSN and ACT installed today! For some reason the keyboard was in German, so switched that back!
Thanks guys!
Now got to find uber cool stuffs for my phone...
what's the value for an azerty keyboard
Although I don't see much different from the one that was leaked on July 10th...see for yourself
http://www.htc.com/us/faq_detail.aspx?p_id=76&act=sd
eder said:
Although I don't see much different from the one that was leaked on July 10th...see for yourself
http://www.htc.com/us/faq_detail.aspx?p_id=76&act=sd
Click to expand...
Click to collapse
tested and works perfectly! got a GPS lock faster then my old Mogul used to get...
boots twice as fast as the wm6 rom..
looks good
eder said:
Although I don't see much different from the one that was leaked on July 10th...see for yourself
http://www.htc.com/us/faq_detail.aspx?p_id=76&act=sd
Click to expand...
Click to collapse
thx!!!!!! much appreciated
I know this has been/will be asked a million times over, but is there any noticable difference from the July 10 "Leak"?
In the settings screen shown on HTC's website, all information matches exactly the July 10 release.
Please advise.
Opera?
Anyone know if the Official ROM includes Opera, like the july10th did?
Thanks
Do this ROM got the enlarged status icons (volume, battery, etc.) screen when clicking on status icons like on the Telus leaked ROM?
If so, is there any way to remove it?
I tried HKLM->Software->HTC->EnlargeTitleBar->Enable=0 without success.
ssami1 said:
Anyone know if the Official ROM includes Opera, like the july10th did?
Thanks
Click to expand...
Click to collapse
Yes, it does include Opera Mobile 8.65.....
Curious.
How come the leaked (about a week ago) version is larger than the one just put on the HTC site?
3.03.651.4 (7/10/08) is 78.9mb
3.03.651.4_2 (7/18/08) is 76.6mb?
What (if anything) is missing or changed?
i dont see the download file - just a blank screen with FAQs etc?????
Where did it go?
I'm guessing that it was not supposed to be posted until Monday or something, because at this point it's not up there anymore.
Here is the link to the file off of the HTC site (yes the official site) which was saved in my broswer history:
http://216.139.227.226/RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship.exe
regarding the difference (from boggsie over at PPCGeeks):
I compared the last two RUU_WWE's and while the 2.nbh file did change, everything else was the same.
I compared the contents of the 2.nbh files and the changes apperar to be very, very minor.
SYS folder is identical (binary comparison) except for \Metadata\default.hv
OEMDrivers folder is identical except for a single DSM file and the corresponding RGU file. The difference in the RGU file was one single line: "ROMVersion"="3.03.651.6" This, in contrast to the filename and the update screen, which both include: "3.03.651.4"
One difference that does draw my attention is that the PPST CAB files have the same names (PPST_08516_7500_SPCS_2.04.sa.CAB) but the files are different and the file contents are quite a bit different.
Other than these items, the differences seem to be limited to the way that the released build was packaged ...
For example, the last leaked build had nested in the OEM\OperatorPKG\Hidden.cab file, another cab file that included "Telus_NIM" which is not present in today's released build.
Best regards,
-boggsie
Click to expand...
Click to collapse
In my personal experience, GPS is MUCH better than any previous versions and this new version seems to be a bit quicker than the leaked .4
Difference between Sprint and Telus ROM.
johnbtcb said:
Curious.
How come the leaked (about a week ago) version is larger than the one just put on the HTC site?
3.03.651.4 (7/10/08) is 78.9mb
3.03.651.4_2 (7/18/08) is 76.6mb?
What (if anything) is missing or changed?
Click to expand...
Click to collapse
I installed the Telus ROM and it does not include Opera. Also, the Telus ROM does include some crap like Telus Navigator (very bas GPS software) and Telus Icons (Today addon) and Telus theme. They should not be included in Sprint ROM.
can someone please post the Instructions??? Thanks
can you upgrad from the leaked rom to the offical rom with no problems?
"It’s been so long that we almost stopped caring"
ditto that. but thanks nonetheless
agentmikeyd said:
can someone please post the Instructions??? Thanks
Click to expand...
Click to collapse
geez Louise...
- d/l ROM .exe file into PC
- attach Touch to USB to PC
- get ActiveSync working
- do any backing up that you may require as ALL Touch memory will be wiped
- run ROM .exe file from PC
- follow instructions, take ~10minutes
- sometimes requires an additional HARD reset (TALK+END+reset button) after install is done to bring in Opera and a few other goodies.
neurocutie said:
geez Louise...
- d/l ROM .exe file into PC
- attach Touch to USB to PC
- get ActiveSync working
- do any backing up that you may require as ALL Touch memory will be wiped
- run ROM .exe file from PC
- follow instructions, take ~10minutes
- sometimes requires an additional HARD reset (TALK+END+reset button) after install is done to bring in Opera and a few other goodies.
Click to expand...
Click to collapse
Is that ActiveSync step necessary, or is it just useful for the backing up part?
JasonFH said:
I'm guessing that it was not supposed to be posted until Monday or something, because at this point it's not up there anymore.
Click to expand...
Click to collapse
Something must have gone wrong
Upgraded using the download link above
and it worked without a hitch. Thanks!
GPS works like a charm in both Google maps and Live Search maps.
The Opera browser is Opera Mobile. I used Opera Mini, which is free by the way up till now, and I like it a lot better than Opera Mobile so it's a little confusing why they put this version in but then after all.. it is Sprint. Not a lot of advantage to Opera Mobile over IE to me.
The Sprint tech who reset my phone the other day because it was dropping calls all the time said Win 6.1 solves 'a lot of problems' in that area. Who knows. Maybe. Let's hope so. I will say that after they did the hard reset it quit dropping calls so beware that if you load a lot of software it can effect the call dropping. I had Skype, changed the touch flow settings, different java, opera mini, etc etc etc etc etc. so who know's which one messed it up.
GPS is cool. The new Qwerty keyboard is a huuge improvement and I probably won't need TouchPal now. I will load Opera Mini and hopefully it works.
Thanks for the update Sprint/HTC! Thanks too for the links and help above!
p.s. tried opera mini and several minutes after using it the phone locked up. sick of messing with that and don't want to bother loading
another version of java again.
bottom line... Windows Mobile still doesn't have a browser that's worth a crap.
...more
GPS works in Google Maps and Live Search Maps
Works in both for me. Didn't have to change any settings.
I thought it wasn't working at first
In Google Maps you have to have My Location enabled and select Use GPS in the menu
In LiveSearch Maps you have to select Center on GPS in the menu to show your position on map
select View, Lat/Lon to display your position
It takes around 30 seconds to get a lock for me in Redmond, Wa area once I select Use GPS
Google maps it shows it's tracking 6 satellites.
LiveSearch map does not show the number of satellites.
Upgraded smoothly!
es3045 said:
can you upgrad from the leaked rom to the offical rom with no problems?
Click to expand...
Click to collapse
I just upgraded from the leaked version to version 3.03.651.4 without a hitch! The only changes I noticed are the Sprint Navigation (actually works), this one has the Opera browser, and it upgraded me from Windows Basic to Professional! Not a bad deal!
The only thing I am noticing so far is I can't connect to the internet. I suspect it's because the current username (located under "Settings>Device Information") show "[email protected]", and should show my actual Sprint email as the username. I think this will change once it's fully provisioned after the ROM upgrade. I'll keep everyone updated on this.
I've been testing Garmin Mobile XT on my HTC Touch HD for a few days now. Works great: responsive and looks beautiful on the large screen. I've tested ever available feature including the Garmin Online options: everything works with one exception: Panoramio Photos. Whenever this feature is selected, I get the following error message:
Garmin Mobile XT
ERROR: Assert failed at CDP_LBSPhotosListField.cpp : 699 in Garmin Mobile XT with error 0
Click to expand...
Click to collapse
GMXT terminates with this message.
Is anyone else seeing this?
HTC Touch HD
ROM version: 1.14.405.3 (22273) WWE
ROM date: 10/24/08
Radio Version: 1.09.25.14
Protocol version: 52.49a.25.26U
Garmin Mobile XT
Version: 5.00.20wp
Maps: City Navigator North American NT 2009 ALL
I get the same error message.
lakers8833 said:
I get the same error message.
Click to expand...
Click to collapse
Thanks. Bad that you're seeing the same issue; good that I'm not alone...
I got same error too! Find any solution ? this is something afecting the HD only ?
Same problem on my HD. I was running Garmin XT on HP iPaq 612C and had no problem then.
Anyone has any solution ?
dampam said:
Same problem on my HD. I was running Garmin XT on HP iPaq 612C and had no problem then.
Anyone has any solution ?
Click to expand...
Click to collapse
I've found that the Panoramio Photos feature works in landscape mode only. I have Gyrator installed and when I rotate the HD I can use this feature. Once I rotate back to portrait I get the error message.
Garmin Mobile XT - Panoramio error!!!
I have the same issue with you guys.
Clicking on panoramio on HTC HD says error and the application closes.
The start menu bar also gets disabled.
When i use the latest version for my w960i no problem at all.
Could anybody help us with that?
DEVELOPERS HELP !!!!
I get the same error too so I just rotated to landscape and it worked. That is weird.
I had a lengthy e-mail exchange with Garmin technical support concerning this issue when I first noticed it. Thanks to XDA I was able to confirm that other's had the same issue and that it didn't occur when the HD was in landscape mode.
Unfortunately I got the impression Garmin wasn't convinced that there was an issue. (I find when dealing with software support organizations, 99% of the effort is convincing them there's an issue in the first place. I've encounter this attitude so often with Garmin that I've requested to communicate with the developers directly. )
I request that anyone encountering this issue send an e-mail directly to Garmin Technical Support - strength in numbers...
Where did u guys get Garmin from? I've been looking but not found it yet lol
I've got Problem when I use theme changed by TF3D. It's make Garmins not work problem is program cant detect Satellite!! but if i hard reset Garmin work. what will i do for solve this problem i want to use theme....
Yup I've got the same problem
I've contacted Garmin too, and got a response about what Panoramio is and how to start it, sent a response to that.
Quite sad, I've been using Garmin products for a long time now, their products are really well built and I've not had to use support much but when I did I used to get really good responses.
I guess like any company that becomes big they start skimping on customer support.
danprocter said:
Where did u guys get Garmin from? I've been looking but not found it yet lol
Click to expand...
Click to collapse
Expansys has it, I ordered from Pdashop
shagratt said:
I got same error too! Find any solution ? this is something afecting the HD only ?
Click to expand...
Click to collapse
Use something like Gsen and turn the HD on its side (in landscape mode Panoramio works)
Just got a message that they don't get when testing on the Touch HD, perhaps it is tied to a particular ROM, what roms do you guys have?
I have 1.14.401.3 (22273) WWE
Just got this reply from Garmin
I have passed this information on to our developers we are releasing
anther mobile xt software update in a few weeks. This should hopefully
resolve the crashing issue you are having. It may just be a certain
build as you have said again we can look into this.
Click to expand...
Click to collapse
So it's also a heads up for a new version
Excellent!
HugoTouchHD said:
Just got this reply from Garmin
So it's also a heads up for a new version
Click to expand...
Click to collapse
Looking forward to the new version and hope this will also improve the response speed of XT.
Hope few weeks is really few weeks....
Garmin mobile xt
Hi, I'm new in here because right now i bought the HTC touch HD , I install Garmin mobile xt on my HTC and think that I have a problem because when it is in use its look at about 3-5 seconds in delay and the speed looks about 5-6 km/h in less as well, the car doesn't move live with me, i had like i still pict of the car and after 3-5 seconds update the route again I dont know how can i exactly explain. 1fps. The alert voices left turn right turn etc. are fine.
Can someone help me to resolve this problem,? please..
Has a newer version come out yet? I get this message, but with the HTC HD2. Using same landscape program to resolve the problem when NOT vertical. Still would rather have a permanent solution though.
Hi, first post here. I finally replaced my 6 year old iPAQ 2210/2215 with an HTC Touch Pro 2 a couple of days ago. I'd appreciate advice on a few points please. Hope it's OK to raise multiple topics like this? I also posted to HTC forum yesterday but so far no replies.
1. I make/receive relatively few mobile phone calls so I prefer to use the TP2 in a rather similar mode to previously. IOW, more as a Pocket PC than a phone. Am I right that the Today screen cannot co-exist simultaneously with TouchFlo3D - it's one or the other?
2. Assuming that's the case, is there some way I can quickly restore the TouchFlo UI when I do need it? Or must I go through Settings > Today > Items and re-check that box (losing all my other checkmarks)?
3. I can get to most of the TouchFlo features anyway from the Today screen. But one at least has defeated me: that nice Weather program, which I like a lot. Any suggestions on how to build a shortcut to it please, even if not with the fancy animation?
4. I'm concerned to maximise battery life. I can turn off WiFi and Blutetooth. Is it possible to turn off GPS when I'm not using it?
5. I've so far not found a built-in backup tool (like iPAQ Backup). Is there one, or must I use a 3rd party tool like Sprite Backup?
6. Is there an executable somewhere on my TP2 that will rotate the screen please? When I add Pocket Plus to my Today screen, that has such a toggle tool under one of its tabs. But, despite having only just paid for Pocket Plus (which I've happily used for years on the 2210/15), I don't think I'm going to get on with this latest version, so I need an alternative rotate tool.
Sorry for what's turned out to be a rather long first post!
--
Terry, East Grinstead, UK
1. Completely right, but you can use SecondToday (freeware) as a shortcut to the "old" today screen.
2. See 1
3. Stay with the Today screen in combination with secondtoday
4. No, you cannot turn off the GPS, but what helps a lot is to put the band of the telephone fixed to GPRS, not UMTS/3G/HSDPA. That saves your battery a lot.
5. No there isn't, you must look for Sprite, SPB or sunnysoft backup.
6. Try Flip-it, it works automatically with your Gsensor. Otherwise look for Gyrator or ChangeScreen
Hopes it gets you going
Re backup software. dotfred.net's pimbackup is a handy tool to transfer personal info and can be scheduled.
I am using Second Today.. works great!! love it!! Just like you, can't live without the WM today screen.
Thanks all, appreciate the replies so far. Will try SecondToday. I'm still experimenting with Today plug-ins such as Pocket Plus and PocketBreeze.
I have another query but will post separately about it as it's an application problem.
--
Terry, East Grinstead, UK
ronh said:
1. Completely right, but you can use SecondToday (freeware) as a shortcut to the "old" today screen.
Click to expand...
Click to collapse
Hmm, wonder what I'm doing wrong here? I downloaded SecondToday.CAB and copied it to TP2, then tried to execute it. But nothing happened.
--
Terry, East Grinstead, UK
Just to add.
GPS is turned off all the time unless an application is polling it.
So unless you leave the GPS test,GPSToday, Google Maps, Tomtom, iGo or whatever running, it will be off.
labbbby said:
Just to add.
GPS is turned off all the time unless an application is polling it.
So unless you leave the GPS test,GPSToday, Google Maps, Tomtom, iGo or whatever running, it will be off.
Click to expand...
Click to collapse
Thanks labbbby, that's good to learn. My main app is Memory-Map, which I use for planning walks (hikes) and recording them etc. On a 6 mile walk the other day I was a bit disappointed to find that my battery was down to about 50%. So extrapolating to a full day's trek (say 12-15 miles) it would be on the limit. Reckon I'll have to invest in a spare.
--
Terry, East Grinstead, UK
terrypin said:
Hmm, wonder what I'm doing wrong here? I downloaded SecondToday.CAB and copied it to TP2, then tried to execute it. But nothing happened.
Click to expand...
Click to collapse
Try a search on SecondToday for other download sites, maybe you where unfortunate to get a faulty install file...
Hi,
- I would advice you to use TouchFloDetacher, works better than mToday or SecondToday AND it has an easy softkey changer so you can switch easily between TF and Today
- My favorite weatherplugin: WeatherBugDirect_PPC_VGA. Works great but maybe not fancy enough (?)
- Rotators enough: there is a cab somewhere on this forum that does it by changing some reg setting: is better because all the others (i think) are separate programs that need to be running in the background using up mem!
hope this helps a bit ... (still a TP2 beginner myself)
greetz
C.
terrypin said:
4. I'm concerned to maximise battery life. I can turn off WiFi and Blutetooth. Is it possible to turn off GPS when I'm not using it?
Click to expand...
Click to collapse
I feel I must correct others:
4.- yes, GPS is switched automatically off when no program listens to the virtual COM port that they see (the driver monitors it), and started when a program connects to it.
It is also switched off in suspend mode, if you would like to log track with PPC "off" - see my program at www.madhacker.org that changes the way the driver behaves.
ronh said:
Try a search on SecondToday for other download sites, maybe you where unfortunate to get a faulty install file...
Click to expand...
Click to collapse
Ron: Turned out to be down to my stupidity. I tried to execute SecondToday.CAB from my PC! Installed OK of course when done properly from Resco File Explorer on the TP2.
But can you help me get it working please? I first ran the CAB while in TouchFlo mode. Should I then see any evidence of it on the main screen (purple, with large digital clock)? I didn't see anything obvious so went to All Programs. There I found 3 relevant entries:
SToday Quit
SToday Settings
Second Today
I clicked the last and got an empty Today screen, with the left softkey 'Calendar' and no softkey on the right. I clicked that blank area anyway, as I couldn't find anything else, but that gave the error message "This file cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found..."
That mention of a trusted certificate is puzzling. When installing from the PC desktop I've been getting an alert about that and clicking Yes to proceed. But when installing from this SecondToday.CAB that didn't happen.
--
Terry, East Grinstead, UK
Curehead said:
Hi,
- I would advice you to use TouchFloDetacher, works better than mToday or SecondToday AND it has an easy softkey changer so you can switch easily between TF and Today
- My favorite weatherplugin: WeatherBugDirect_PPC_VGA. Works great but maybe not fancy enough (?)
- Rotators enough: there is a cab somewhere on this forum that does it by changing some reg setting: is better because all the others (i think) are separate programs that need to be running in the background using up mem!
hope this helps a bit ... (still a TP2 beginner myself)
greetz
C.
Click to expand...
Click to collapse
Thanks Curehead. Not sure if you've seen my reply to Ron about SecondToday, but I'm having the same frustration with TouchFloDetacher! I'm sure it will turn out to be down to some basic mistake on my part.
I ran TFDetacher.CAB in Resco File Explorer while TouchFlo was on. Then, as I couldn't see any more direct way, in All Programs I found 'Hide TouchFlo' and clicked it. That gave me the error message "Unable to find TouchFlo Detacher Service". I also tried re-installing when in Today mode, but got into a similar mess there too.
--
Terry, East Grinstead, UK
AlCapone said:
I feel I must correct others:
...if you would like to log track with PPC "off" - see my program at www.madhacker.org that changes the way the driver behaves.
Click to expand...
Click to collapse
AlCapone: Many thanks, I've duly installed GPSTweaker.exe which sounds exactly what I need!
If I've understood correctly this means that while using Memory-Map to record my walks I will be able to switch off (suspend) my TP2 to minimise use of the battery, yes? But I'm not clear how Mem-Map will still be tracking while the TP2 is suspended? Unless it does, there's not much point keeping GPS running?
--
Terry, East Grinstead, UK
ronh said:
1. Completely right, but you can use SecondToday (freeware) as a shortcut to the "old" today screen.
6. Try Flip-it, it works automatically with your Gsensor. Otherwise look for Gyrator or ChangeScreen
Click to expand...
Click to collapse
Ron,
I started with Gyrator but I'm totally baffled as to how to set it up. I read earlier in an article about it something to the effect that "Install the MS.NET stuff and the CAB and it just works." Not here it doesn't.
After reset I got a sort of setup screen I didn't really follow so I opened the 'Events' window only to get a complex settings window that meant nothing to me. I'm not normally this dense! Is it meant to be understandable by mere end users rather than programmers/developers?
Is there a reasonably simple step-by-step on how to set it up you can point me to please?
I was hoping for a program that would simply install itself and then either automatically rotate every screen or let me do so at the tap of a command.
I'll try Flip-It now.
Edit:
Gave up on Gyrator and didn't try Flip It following further study. But instead I'm pleased to report that late last night I eventually got ChangeScreen working. The only one I found comprehensible!
BTW, its default was set not to rotate TouchFlo screens, so I had to change that. Why would that not be generally regarded as desirable please?
--
Terry, East Grinstead, UK
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=632147
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Mesho.112 said:
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=593162
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Click to expand...
Click to collapse
i HAVE BEEN LOOKING FOR THIS FOR QUITE SOMETIME, LET'S HOPE SOMEONE COULD SOLVE THIS ISSUE.
imtiyazee said:
i HAVE BEEN LOOKING FOR THIS FOR QUITE SOMETIME, LET'S HOPE SOMEONE COULD SOLVE THIS ISSUE.
Click to expand...
Click to collapse
we'll imtiyazee & see if could someone offer help.
both links are the same, which one is the correct one for the HD2?
i don't get it what does this do?
Tha said:
both links are the same, which one is the correct one for the HD2?
Click to expand...
Click to collapse
i'm sorry this link for HD2
forum.xda-developers.com/showthread.php?t=632147
slaming said:
i don't get it what does this do?
Click to expand...
Click to collapse
google it use ' blackberry service'
Mesho.112 said:
Who could guys change the SetModelID.exe to make the installtion go through the HD for blackberry app suite?
there is one here for HD2
forum.xda-developers.com/showthread.php?t=632147
and here for pro2
forum.xda-developers.com/showthread.php?t=593162
i would be very thankful for who could do this.
Click to expand...
Click to collapse
DONE! . It's attached.
Installation goes without any problems (just needed to uninstall bb connect software). BB Application Suite starts but after splash screen I got only white screen and then program probably terminates itself (or wm does it) as I see only today screen (TouchFLO is switched off while BB Application Suite starts).
I have Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010 flashed on my Touch HD and registry tweek - AKU changed to .1.6.0). maybe the WM build could be a problem.
Please share your experience with BB Application Suite on BlackStone I realy am keen on the bb service.
nnnpga said:
DONE! . It's attached.
Installation goes without any problems (just needed to uninstall bb connect software). BB Application Suite starts but after splash screen I got only white screen and then program probably terminates itself (or wm does it) as I see only today screen (TouchFLO is switched off while BB Application Suite starts).
I have Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010 flashed on my Touch HD and registry tweek - AKU changed to .1.6.0). maybe the WM build could be a problem.
Please share your experience with BB Application Suite on BlackStone I realy am keen on the bb service.
Click to expand...
Click to collapse
I'm sorry nnnpga but the file is empty, would you plz reupload it...
Mesho.112 said:
I'm sorry nnnpga but the file is empty, would you plz reupload it...
Click to expand...
Click to collapse
Sorry my mistake. Watching Vacouver ...
Now archive with the file
nnnpga said:
Sorry my mistake. Watching Vacouver ...
Now archive with the file
Click to expand...
Click to collapse
Allright, it worked in my phone "XTROM_GRIDEVO_20B" but it need registertion with either BIS or BES .. ill try and feed you back ..
Thanks nnnpga...
Working but no soft keyboard
After hard reset and installation BAS started to work on Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010.
I have got a PIN (the same as at the BB connect) however was not able even to try enterprise activation as the soft keyboard was not available anywhere there. Or my phone is still not bugs free or it had meant to be this way as Touch Pro (Raphael) has hardware keyboard.
Anyhow I was to flash it to something else tomorrow so I will give it another try.
nnnpga said:
After hard reset and installation BAS started to work on Energy.BLACKSTONE.21891.Leo_MaxManila_07.Feb.2010.
I have got a PIN (the same as at the BB connect) however was not able even to try enterprise activation as the soft keyboard was not available anywhere there. Or my phone is still not bugs free or it had meant to be this way as Touch Pro (Raphael) has hardware keyboard.
Anyhow I was to flash it to something else tomorrow so I will give it another try.
Click to expand...
Click to collapse
There is keyboard there but I'm not ganna tell you how to get it caz I'm sure you don't want to see it lool, it the worst keyboard ever, BIS must be joking with us. anayway long press until you see the keyboard in leftbottom.
I got my pin too with BIS service but still stock with enterprise activation. I was thinking to get BES but after I saw the keyboard I changed my mind or If someone haked the app to change the keyboard.
sorry
sorry to sound like an idiot but, ive downloaded the file that was attached...how do i install the appliciation suite?
could this be done for hd mini
Where is the dot "." in soft keyboard?
Thanks for your advices.
Managed to get up to the point of actibation, soft keyboard appeared by long press for each character.
To enter my email I need a dot "." for my email-name and the ".com" ending. There is a character that appears like this, but sits on the middle between characters not on the ground. Any ideas?
Thnx
G.
Hi all,
Ive read all the posts from over 50 sites (XDA and others) and can still not get the BAS to work on my HTC HD2 Leo.
Ive got it to install, Both BBC and BAS.
I have a BES account with my company.
I can get to the Register screen and nothing happens, says message sent but i can go no further.
Ive tried the hack for Raphael, done all the other reg tweeks.
Can someone please provide a simple answer for geting BAS to run, Register, do enterprise activation, sync with my company email, allow internet use etc.
I hate the blackberry they use, dont know why they use it.
I would very much love for someone to provide a solution, i only have 1 week left on my valid activation code. I need my HD2.
Please, please help.
ive spent countless hours and i am actually loosing sleep over the issue.
Thanks
Thanks for the software