I flashed to NFSFAN's wonderful 6.5 rom for sprint vogue. After doing so I have lost ability to connect to internet and connect to active sync. Active sync gives me an error your device has malfunctioned over and over again. I've already tried the Start -> Settings -> Connections -> USB to PC, uncheck 'Enable faster data synchronization' for active sync with no luck. In the past when I've done a hard reset, I then also had problems connecting to the internet. Even called sprint whom couldnt help. Went through the ## codes to get to the M.IP default profile where the NAI was and it read about 7 numbers @sprint blah blah blah along with my public key in some symbols and signs. After changing my NAI to the proper address the phone would initiate the iota and everything would be dandy. Not so much with this 6.5. I love it but I need internet in order to survive lol at least until the rhodium Even if I can get back to the 6.1 rom, how would i be able to do that without the active sync connection? Anywho, help please? Thanks
mbaseball3 said:
I flashed to NFSFAN's wonderful 6.5 rom for sprint vogue. After doing so I have lost ability to connect to internet and connect to active sync. Active sync gives me an error your device has malfunctioned over and over again. I've already tried the Start -> Settings -> Connections -> USB to PC, uncheck 'Enable faster data synchronization' for active sync with no luck. In the past when I've done a hard reset, I then also had problems connecting to the internet. Even called sprint whom couldnt help. Went through the ## codes to get to the M.IP default profile where the NAI was and it read about 7 numbers @sprint blah blah blah along with my public key in some symbols and signs. After changing my NAI to the proper address the phone would initiate the iota and everything would be dandy. Not so much with this 6.5. I love it but I need internet in order to survive lol at least until the rhodium Even if I can get back to the 6.1 rom, how would i be able to do that without the active sync connection? Anywho, help please? Thanks
Click to expand...
Click to collapse
Did you hard reset and attempt again? if so then...
Download and install the DCD Sprint Carrier Cab HERE
The your have the Sprint settings and tools to connect
Detroit Doug
Detroit_Doug said:
Did you hard reset and attempt again? if so then...
Download and install the DCD Sprint Carrier Cab HERE
The your have the Sprint settings and tools to connect
Detroit Doug
Click to expand...
Click to collapse
Ok cool. Thank you sir. I shall give it a try.
oops wait, i forgot i cant connect to internet or active sync
mbaseball3 said:
oops wait, i forgot i cant connect to internet or active sync
Click to expand...
Click to collapse
Can you access your SD card via your PC? move the SD card to PC, copy to it, put SD card back in phone, turn phone on, wipe hands on pants ...
Otherwise with ANY custom ROM I always suggest, flash, let customizations run, hard reset, let customizations run, use phone, dance in your pants
for some reason it eliminates issues (like your having) from happening nearly as often or at all
Detroit Doug
I have that exact same rom.
All I did was run the dcd cab for my carrier,
Do you have alltel by chance?
because if so I have the arcsoft cabs you'll need to run for mms.
Otherwise you'll have to search for your carrier's mms cabs.
And whenever you plug your phone into the computer there should be a screen that pops up that says "Connect To Pc" on the top and has three options,
Activesync,
Disk Drive
Internet Sharing
If you don't look at the screen for like 30secs after you plug your phone in to your computer you'll miss that screen.
So pay attention to it.
That's all I can think of right off the top of my head.
Any other questions?
Detroit_Doug said:
Can you access your SD card via your PC? move the SD card to PC, copy to it, put SD card back in phone, turn phone on, wipe hands on pants ...
Otherwise with ANY custom ROM I always suggest, flash, let customizations run, hard reset, let customizations run, use phone, dance in your pants
for some reason it eliminates issues (like your having) from happening nearly as often or at all
Detroit Doug
Click to expand...
Click to collapse
ok so i used my girlfriends diamond to download the sprint dcd and beamed it to my vogue. (not at a computer yet to try the sd way) apon attempting to install the cab i keep getting download unsuccessful. what did i mess up now? im ready to dance
mbaseball3 said:
ok so i used my girlfriends diamond to download the sprint dcd and beamed it to my vogue. (not at a computer yet to try the sd way) apon attempting to install the cab i keep getting download unsuccessful. what did i mess up now? im ready to dance
Click to expand...
Click to collapse
How did you do that??? the HTC Vogue (Touch) does NOT have IR for beaming
its got bluetooth and internet when working ..
Detroit Doug
I think he beamed it via bluetooth. My friends and I use that to send pictures back and forth.
atoz350 said:
I think he beamed it via bluetooth. My friends and I use that to send pictures back and forth.
Click to expand...
Click to collapse
yes exactly I used the bluetooth to beam. I googled for the dcd cab from a different site that worked and now my problem is the dreaded error code 67 and 1012 from the client iota. I know my sprint web address is right but I don't know the password so obviously gonna have to call sprint. thanks for your help guys. im sure ill have more questions before I can dance about
mbaseball3 said:
yes exactly I used the bluetooth to beam. I googled for the dcd cab from a different site that worked and now my problem is the dreaded error code 67 and 1012 from the client iota. I know my sprint web address is right but I don't know the password so obviously gonna have to call sprint. thanks for your help guys. im sure ill have more questions before I can dance about
Click to expand...
Click to collapse
I think for sprint, it's the same as for Telus, in that you set it to #777 and leave username/password blank - HOWEVER - if in EPST your M.IP settings are wrong, it will not connect, and you will be greeted with "Cannot connect for an unknown reason" on the device. Your carrier should be able to give you the info for the setting you need to correct. To get to the setting you need your MSL, pop in ##PST# or whatever, and it's in there under view info - M.IP Default Profile. make sure it's set to ENABLE and the NAI is correct. For Telus it's your mobile [email protected]. Not sure what Sprint would be here. You'd have to ask someone with sprint.
If you've done all this already, and I've misread/not read that part, I apologize! Hope this at least points you in the right direction for solving your problem though! No data is no good!
??????????
mbaseball3, did you solve your problem?
yes everything is almost working properly. thanks guys! my only problem though, still, is activesync on my computer still does not recognize my phone. I've been basically stumped. one great feature of this rom though is the PIM backup =D life saver. still a pain though not being able to sync phone with comp and having to go the long way of using storage card for loading and unloading things. still open for trying to solve this problem though if anyone has possible solutions. thanks all again
mbaseball3 said:
yes everything is almost working properly. thanks guys! my only problem though, still, is activesync on my computer still does not recognize my phone. I've been basically stumped. one great feature of this rom though is the PIM backup =D life saver. still a pain though not being able to sync phone with comp and having to go the long way of using storage card for loading and unloading things. still open for trying to solve this problem though if anyone has possible solutions. thanks all again
Click to expand...
Click to collapse
Are you using either 64bit version of Vista or Windows7? if so I know I had to completely uninstall and then fully re-install WMDC (Windows Mobile Device Center) to make my phone sync with my PC again
Detroit Doug
Detroit_Doug said:
Are you using either 64bit version of Vista or Windows7? if so I know I had to completely uninstall and then fully re-install WMDC (Windows Mobile Device Center) to make my phone sync with my PC again
Detroit Doug
Click to expand...
Click to collapse
Yep. Same thing here. Switched to Windows 7 x64 and had to re-do everything. Outlook even erased all of my contacts on the first sync so back them up first! Once I restored them, all is well.
I'm actually still using windows xp. by the time I got around to wanting to try out windows 7 microsoft shut down the download. no biggie though.
mbaseball3 said:
I'm actually still using windows xp. by the time I got around to wanting to try out windows 7 microsoft shut down the download. no biggie though.
Click to expand...
Click to collapse
Its open now until June.
mbaseball3 said:
yes everything is almost working properly. thanks guys! my only problem though, still, is activesync on my computer still does not recognize my phone. I've been basically stumped. one great feature of this rom though is the PIM backup =D life saver. still a pain though not being able to sync phone with comp and having to go the long way of using storage card for loading and unloading things. still open for trying to solve this problem though if anyone has possible solutions. thanks all again
Click to expand...
Click to collapse
go to start->settings-> connections-> "USB to PC" -> then check off "activesync" and "ask me first..." Even if they are correctly checked, check something else off, soft reset, then put them back as they are supposed to be.
ok my activesync issue is no longer an issue. thanks for all the advice folks. something so simple cured it =D I just uninstalled then installed activesync (yes newest version from ms) and it worked. ta-da! shoulda been something done first but didn't think about it. doh!!
mbaseball3 said:
ok my activesync issue is no longer an issue. thanks for all the advice folks. something so simple cured it =D I just uninstalled then installed activesync (yes newest version from ms) and it worked. ta-da! shoulda been something done first but didn't think about it. doh!!
Click to expand...
Click to collapse
Glad your activesync issue cleared up.
Can you tell me how you got data working again? It took some time on the phone with verizon before they could get my newly flashed 6900 activated then I had to download a prl file myself to get rid of the roaming indicator. But I still don't have data working.
Thanks!
Related
Anyone know how to turn the GPRS off so that it never comes on?
What you need is this ......... creates an icon called No Data, with it you can toggle on and off your GPRS, I've been using for a while and it is excellent, stops GPRS connections altogether until you want it...
Activesync it somewhere on your orbit and then click on it within File Explorer
Ah! Stew! Saviour! A million thanks... exactly what I was looking for...
Why?
Hi
Why turn GPS totally off? does it use more battery when your not using it?
MicTh
Hi there MicTh...
I'm with O2 and their data tarrifs are somewhat expensive.
I use wifi a lot so don't need GPRS. There has been the odd occasion where I've lost wifi signal and the phone started connecting with GPRS...
The above program put a stop to this!
SG
Ohhh.. stupid me :O)
I thought u were talkin about turning GPS off.... My bad
thanks i have also been looking for app like this
someguysomewhere said:
Anyone know how to turn the GPRS off so that it never comes on?
Click to expand...
Click to collapse
This can be done easily by:
Settings->Connections->Connections->Advanced->Select Networks->(in the first ComboBox) select "My Work Network" and click OK
No GPRS does it much simpler, simply toggling between on and off....GPRS can sometimes connect on demand, the phones demand not yours when receiving messages or when Quick GOS has become outdated, NO GPRS is the simplest solution I've found.......
Thanks - I've installed this - one question
I have disabled Mobile Web and O2 Active
Will I still receive MMS messages ???
Hays
hays said:
Thanks - I've installed this - one question
I have disabled Mobile Web and O2 Active
Will I still receive MMS messages ???
Hays
Click to expand...
Click to collapse
No, MMS is sent and received over O2 Active which is WAP.
where do i copy files to
im new to orbit could you tell me where i place the files please
Copy it to you memory card and run the program. It will install itself.
thanks
thanks for your help ive got it sorted
now ive installed it and i click on the nodata icon it shows gprs as deactivated but if im usin wifii it says connecting to gprs is that normal or have i done something wrong.
also if it says connecting to gprs while nodata is installed does it still run up the bill,orbit is all new to me so im still trying to find my way around it im used to normal phone.
Hi,
just a question on this wifi-gprs. Is there a way to include a priority on one of the two?
I would like my phone to connect through wifi is it finds free or known connections, otherwise it should use wifi.
Anybody know of a setting to get this done?
Patrick
I have a Hermes and I can stop my GPRS connection instantly.
Please try this (also on other HTC models)...
When you still have a GPRS connection press and hold down the hangup button for 3 to 6 secs. (the red phone you use the end a phonecall) until the little GPRS icon disappears.
GPRS as a service will stay available.
Hi.
I'm sorry but I am having a noobie moment.
I have transferred the 3 NOGPRS files into My Music (cos I couldn't think of anywhere else to put it) and clicked on the "setup" file which opens revealing lines of code. But that's it, how do I install it? Where do I find the icon?
Sorry, this might seem basic to you but it is very complicated and difficult to understand for me.
Garneth said:
Hi.
I'm sorry but I am having a noobie moment.
I have transferred the 3 NOGPRS files into My Music (cos I couldn't think of anywhere else to put it) and clicked on the "setup" file which opens revealing lines of code. But that's it, how do I install it? Where do I find the icon?
Sorry, this might seem basic to you but it is very complicated and difficult to understand for me.
Click to expand...
Click to collapse
u went one step too far.
just extract the NOGPRS.cab to your device,
then take your device and click on the .cab file!
Icefeldt said:
u went one step too far.
just extract the NOGPRS.cab to your device,
then take your device and click on the .cab file!
Click to expand...
Click to collapse
You Sir, are a star! Thank you. Installed and running. <beer>
i've updated my phone with the kavana 6.1 rom- now my Internet sharing doesn't work- and i hate that when i sync with my computer it reads my phone as a dopod so the dashe's icon doesn't come up- can any one help with either of these problems
I flashed this rom for my girlfriends phone. Running into a lot of different issues. Not many options to customize the preferences either. However, hopefully these wonderful developers will create fixes, if they do not exist already. If they do they are probably scattered throughout the thread.
and i hate that when i sync with my computer it reads my phone as a dopod so the dashe's icon doesn't come up-
Click to expand...
Click to collapse
I think this happens with each upgrade because you're basically cleaning out your previous memory and starting fresh.
I don't have an answer for you regarding the internet sharing option.
However, if you want to get your old rom back you can go to T-Mobile website here is the link:
Link wasn't allowed but go to tmobile and click on support you'll see the first phone is the dash
Just go to update software. This may cure both of your issues if you don't want to bother with the current rom you have installed. However, you are still taking risks flashing the new rom. Good Luck.
I've got almost the same issue. Everything with SYNC works except for my internet sharing. It will not connect. I ave internet working on the phone, text works, it syncs when I connect the phone to the computer, I just can not use the internet sharing.
When I select connect on the phone I get that the computer is trying to acquire network address and then local area connection 6 has no or limited connection. I don't get it.
Internet sharing Works Fine On All My Computers
sully78 said:
I've got almost the same issue. Everything with SYNC works except for my internet sharing. It will not connect. I ave internet working on the phone, text works, it syncs when I connect the phone to the computer, I just can not use the internet sharing.
When I select connect on the phone I get that the computer is trying to acquire network address and then local area connection 6 has no or limited connection. I don't get it.
Click to expand...
Click to collapse
As you know, you have to first cut off your local connection server first, before turning on the Internet sharing on your mobile device. If not, it will never work, but Internet sharing works like a charm on my home network................!
redbandana said:
I think this happens with each upgrade because you're basically cleaning out your previous memory and starting fresh.
I don't have an answer for you regarding the internet sharing option.
However, if you want to get your old rom back you can go to T-Mobile website here is the link:
Link wasn't allowed but go to tmobile and click on support you'll see the first phone is the dash
Just go to update software. This may cure both of your issues if you don't want to bother with the current rom you have installed. However, you are still taking risks flashing the new rom. Good Luck.
Click to expand...
Click to collapse
Why on earth would you go back to Tmobile rom. This rom is far superior. All your issues will get worked out. That's just part of updating rom. have you read any threads on this.
I don't claim any great knowledge but does the connections settings in Activsync have anything to do with it.
I've been using this phone for a year, I use the internet sharing all of the time, mostly for work, it' s actually why I bought the phone. Now after I loaded WM6.1 I can not get the internet sharing to work. I've tried everything I've found on here, any ideas.
Hi, I upgraded to WM6.1 over the weekend, everything looks pretty cool.. But IE can not get on the internet anymore.
I'm able to check the email okay but IE reports the following error
HTTP ERROR $CODE$
I see the Edge (E) come up when I launch the IE so that means IE is trying to open the connection but does not bring anything back.
Someone please help
That is the same error I get.
I scanned pretty much all related thread did not find anything yet...
Pig Vomit said:
That is the same error I get.
Click to expand...
Click to collapse
Hi, Newbs. When you flashed your phone did you use the "Sticky: The Guide for UPGRADING WM 6 to 6.1 with PICS and LINKS" I'm pretty sure you both skipped a step naughty naughty....
Well if you go to the Sticky and look at post #3 and run your connection setup like you were suppose too, we wouldn't be having this conversation . It honestly should be that simple.
Good Luck
Manual Settings: http://tmobileuspublic.wdsglobal.co...=phone.vm&selectManufacturerId=9&phoneId=1828
hahah
naughty naughty
thats way better than my approach...
Never a Thank You nor friendly follow up reply either...you ever notice that Gixxum.
pfunkside said:
Never a Thank You nor friendly follow up reply either...you ever notice that Gixxum.
Click to expand...
Click to collapse
i dont expect one....most the time i deserve a follow up kick in the nuts =)
but you were polite, so yes, you got screwed.
ps. THANK YOU FOR FIXING MY INTERTUBEZ.
Internet Explorer not working?
I've been able to figure out every other problem with my IE, but now this one has stumped me, and i need help.
i'm using Wifi, and for some reason i cant go to any websites. even a site such as google wont work.
I get an error that says "The page cannot be found. Check the name and try again."
and i know for a fact that im not typing in "http://www.google.com" wrong. its not a hard one.
its not my connection. im sitting right next to my wireless modem and router and my computer is working fine. in the Comm Manager i have full Wifi service.
There was at one point when i a site to work, but then IE went back to the IE homepage on its own and wouldnt work again.
SOOO pleaseee, if anybody can help, please do
Thanks guys =]
Hi guys.. just checked my thread again now after coming back home. many thanks for replying..
BTW I did run the connection setup multiple times after deleting the settings and all other possible options... but nothing worked.
I just tried setting up proxy mannually but NO GO.....
Looks like I'll have to run the kavana upgrade again..
Many Many Thanks for taking time to reply... I always try to follow up and appreciate people who respond.. thats the least one can do
gixxum said:
i dont expect one....most the time i deserve a follow up kick in the nuts =)
but you were polite, so yes, you got screwed.
ps. THANK YOU FOR FIXING MY INTERTUBEZ.
Click to expand...
Click to collapse
Not sure if this will help but...
I have found that if I switch networks from my "E" data plan to my home WIFI, or vice-versa, I have to quite IE (press the pink tmobile button and select "close" for IE) then restart it and viola it works. I seem to have to do this anytime I was using IE on one network and then connect to another without my phone being turned off at anytime in between.
Hope that helps.
WM6.1 Internet setting !!!!! HELp!!!
I recently flased the wm6.1 v24 on my phone and now i dont have internet. I have tried using the 5.99 plan with proxy and no luck. Right now i have the 19.99 feature but still dont get any internet. Anyone have the setting to make it work with tmobile? (19.99 plan)
ALl i get is I dont have accessed to this site, or http error.
dabezt1 said:
I recently flased the wm6.1 v24 on my phone and now i dont have internet. I have tried using the 5.99 plan with proxy and no luck. Right now i have the 19.99 feature but still dont get any internet. Anyone have the setting to make it work with tmobile? (19.99 plan)
ALl i get is I dont have accessed to this site, or http error.
Click to expand...
Click to collapse
If you are running Ricky's v24:
Start > Accessories > Connection Setup
Run the Connection setup, select United States and T-Mobile. I think that you'll need a reboot after the settings update.
I 2nd That
That's exactamundo correcto. Trust this man. He is dead on.
ruinertt said:
If you are running Ricky's v24:
Start > Accessories > Connection Setup
Run the Connection setup, select United States and T-Mobile. I think that you'll need a reboot after the settings update.
Click to expand...
Click to collapse
having the same problem and after running the connection set up again still getting the "http error $code$ $message$ requestURI=/"
I'm on the 5.99 t-zones. the really weird thing is right after the flash it was working then tried it about 30 min later and nothing. I've tried about 4 different variations of manual settings I can find. Any help?
I'm having the same problem with internet after upgrading to 6.1. Yes I have ran the connection setup and let it reboot, tried it twice with no luck. Txt messages still work, just doesn't seem to access any internet sites. I'm using the 19.99 plan and running Kavana's 6.1 080408 final. I have also tried using the manual settings provided by Tmobile
Any ideas?
does your MMS work?
if not call t-mobile to reenter you into their network. 5 minute call.
do the connection setup then do the tzones hack it worked fine for me and this is the second dash after my first one went out. Not one problem installing anything use search I dont post must as u see but I have done plenty of mods on thru this site without asking questions all the answers are out there just search and read.
Hi,
Im using unlocked T-mobile MDA pro 64mb phone with WM 6.1 (build 19960.1.1.8 TML)
The problem is that when I connect to GPRS, Internet explorer, outlook and most of the internet softwares (opera browser, google maps etc...) don't work. Internet explorer stops at loading. outlook says synchronization error. But, a few softwares like IM messenger, some trading software work fine. The problem occurs only when on GPRS. Everything works fine on wifi.
I have been facing this problem since I have unlocked the phone and flashed it for the first time. I have flashed for several times with various roms. initially it works but soon problem reappears. hmm.. Problem did not appear in WM 6.5 (but phone is hell slow. So, im forced to remove it). Further the problem is not network specific as I tried on various networks.
Guys please help me.. I searched a lot on internet and it seems like no one is facing this type of problem in the whole world except me
(Except this: social.microsoft.com/forums/en-US/windowsmobilephonesandaccessories/thread/64977e4f-c8ba-482a-9845-c1d80f88fd71/)
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Simon_WM said:
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Click to expand...
Click to collapse
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
naveensakhamuri said:
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
Click to expand...
Click to collapse
http://www.filebox.com/alhaque/3o6u8gdlfy6j
Also if you want to chnage the radio:
http://forum.xda-developers.com/showthread.php?t=600933&highlight=Challenge
thanks
Hi!
thnx for ur reply... I'm desperately waiting for it...
Any how I tried this... as usually it worked fine at the beginning and problem repeated again. The new development is that the application which I said to be working previously (IM messenger etc...) are also now working now...
Very much frustrated about this issue as I'm unable to find the background reason for it . Even the XDA forums cant help it....And the worst part is that warranty is not going to apply as I unlocked it..
Yet no solution...
info?
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
kalya said:
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
Click to expand...
Click to collapse
Hi
Thanks for your suggestions.
Im using airtel network. and all those settings are already set on my phone.
Yes. I accept that my problem is weird. Thats the reason why I'm unable to find a solution for it.
Yet... I'm testing by changing various roms and still no success.
every time the problem repeats on 2-3 usages of gprs.
When I use opera browser it says that "I have some problem in settings". What to do I've checked those settings for hundreds of times and further if there is a problem in connection settings then why the heck it worked for the first few times?
Some stupid suggestions
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
kalya said:
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
Click to expand...
Click to collapse
Hi
I did every experiment I can think of.... Including testing this sim on other phone or testing the other sim on this phone.
I even tried flashing the original T-mobile rom.
I also tried to find if the programs I install has something to do with the problem...but found none of it affects.
As you said it may not be a rom problem.
If it fails to work completely then I can guss some thing about the origin of the problem like rom or hardware or whatever...
As it is working well initially, I don't understand where exactly the problem lies...
have you done a doc-format? sometimes that can get rid of very peculiar problems.
-Jonny- said:
have you done a doc-format? sometimes that can get rid of very peculiar problems.
Click to expand...
Click to collapse
Hi
Is the process of using mtty and task 28 55aa command what you call doc-format (sorry for ignorance)?
Then I've already did it...
anyway thanks for your suggestion...
I think the real culprit is activesync. anyway I have to do some tests and confirm.
To clear my doubt I decided to conduct a small test. I factory reset my system for three times to check the gprs connectivity...
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc + pairing up + synchronizing problem reappeared.
second reset:
1. GPRS worked flawlessly.
2. On connecting to pc by pairing up problem reappeared.
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc without pairing up problem reappeared.
So, this strengthened my assumption that the problem is with active sync.
I cannot confirm so easily...
Further I would use my phone with out connecting to PC for 3-4 days and check if problem reappears.
Then I would check it by connecting to a different PC. Then I can confirm whether the problem is with active sync of my system or the phone...
By the way, today is the second day of my testing without connecting to pc and no issues detected till now
folks,
Today on the fourth day of my test, I conclude that connecting to my pc creates the gprs problem. No Idea how and why...
suggestions any one?
anyhow I would connect my phone to a different pc and check out if the problem is with my pc or with the phone...
no suggestions?
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
wovens said:
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
Click to expand...
Click to collapse
Hmm..Im sure that I deleted all the older files.. anyway let me I'll try this registry procedure... thanks for your suggestion
i would greatly appreciate any advice on this matter. well normally, all i had to do was plug my device to the computer, i press Internet sharing on device when the prompt shows, and i connect to internet. Now for some reason it wont and i been trouble shooting all morning and cant figure it out. the only difference is i used my device as a disk drive this morning to put Hdwall program on computer. now when i diconnect and connect again, it lets me select internet sharing but when i press connect, it very quickly says check usb device, it disconnects, then the connect button lights back up again as if i never pressed it. i believe the activesync is blocking me somehow. no settings were changed from b4. i even uninstalled activesync and reinstalled it again in computer(windows xp serv. pack 3). still no luck. i got tired of it n shut computer down..lol can anyone lead me in the right path? how do u disable activesync on device and on computer? so that when i connect device to comp., activesync wont start up and cause issues with internet sharing. i have all the quick fixes to mke device faster, like the memory leak, data fix, no push internet, and dynamic proxy thing. are any of those conflicting with me using internet sharing? cuz i now have hspda/hsup enabled..excuse mispelling. is that the prob? i never had this issue b4. i remember reading that if u connect thru active sync and connect again, the device or computer might not recognize the connection since activesync wasnt really disconnected from first session. how do i reset that to make sure new connection(internetsharing) is recognized versus previous sessions? thnkx in advance
You could just uninstall activesync from the host PC, that would keep it from launching anyway...but I don't know for sure if that's going to get around your issue. Can't hurt to try though.
thnx for the advice. strange how it wrked b4 and not now..lol ima try everything possible b4 hard reseting. for some reason, i believe one of those cabs i downloaded screwed wit somethn. i have data fix, no push internet, dynamic proxy, sd tune up and xda wifi router cabs installed. do u think one of those might be the issue? also, i thght activesync is needed in order for PC to recognize phone. so if i uninstall activesync on computer, will it still recognixe the device and the action im trying to perform(Internet Sharing)? its crazy because it worked fine b4 with activesync in the pc.
demandarin said:
thnx for the advice. strange how it wrked b4 and not now..lol ima try everything possible b4 hard reseting. for some reason, i believe one of those cabs i downloaded screwed wit somethn. i have data fix, no push internet, dynamic proxy, sd tune up and xda wifi router cabs installed. do u think one of those might be the issue? also, i thght activesync is needed in order for PC to recognize phone. so if i uninstall activesync on computer, will it still recognixe the device and the action im trying to perform(Internet Sharing)? its crazy because it worked fine b4 with activesync in the pc.
Click to expand...
Click to collapse
I honestly don't know if internet sharing requires an activesync connection, I'd always believed it worked independently of that (and mutually exclusive), like connecting it as a hard drive does.
Make sure that BTTrayCE.EXE is running at startup (look for BTTrayCE.lnk in the Windows\Startup folder). USB Internet Sharing won't work without that service running, and will act exactly like you describe.
Edit: BTW, I mean look for this on your phone, not your computer...
ill make sure to llook for that...i got a slew of cabs to try out in the morning. i have the TP2 tethering cab(the one that doesnt need mortscript) and the ATT tethering cab. im going to try each 1 and uininstalling right after if it doesnt wrk. i also have total commander and seen where all those registry files are at. i just need something clarified for me. When they say, change this(meaning the last line of that reg. file) to this(meaning the edit needed to be ), Is it Simply just Renaming that particular file or part of file? or is it deleting that file and somehow adding one that says the new edit? im confident ill have it tethering soon. at least my xda wifi router wrks perfectly..lol
demandarin said:
ill make sure to llook for that...i got a slew of cabs to try out in the morning. i have the TP2 tethering cab(the one that doesnt need mortscript) and the ATT tethering cab. im going to try each 1 and uininstalling right after if it doesnt wrk. i also have total commander and seen where all those registry files are at. i just need something clarified for me. When they say, change this(meaning the last line of that reg. file) to this(meaning the edit needed to be ), Is it Simply just Renaming that particular file or part of file? or is it deleting that file and somehow adding one that says the new edit? im confident ill have it tethering soon. at least my xda wifi router wrks perfectly..lol
Click to expand...
Click to collapse
Changing values in your registry is a matter of navigating to that registry key in your reg editor, clicking on the entry to bring up the dialog to change the value, and then changing it to whatever is specified (a number, a string, whatever), then just clicking 'ok' to save. It looks a lot like a regular file structure, but it operates a bit differently.
I would STRONGLY recommend using whatever regedit tool you prefer to make a backup copy of your registry before making any changes in it...just in case
Got my Tilt 2 tethering again ;-)
IM BACKKKKKKK...lol I am typing now through the tethered connection. lmao this forum is da bomb. i tried again this mornin with nothing added to phone, like fixes, and it wouldnt let me connect. same as b4. I downloaded the ATT Tethering Cab fix, and like magic it worked. It added the option to let me select media net for connection and it connected with no problem. so if you are having issues connecting like i did b4, try the free ATT Tethering Cab fix on this forum. It worked for me directly right after install. Many thanks and credit goes to whoever created this file. i am really liking this forum. so much info in here. learning new stuff everyday. I thought i was already a tech head, but once i came to this forum, i saw the wild modding and rom flashes, and etc.. people are doing. Give me some time, with this forum, i will be flashing roms also..lol I hope. also thanks to people who gave me some advice and encouraged me to solve the problem. With some research and reading, nothing is impossible.