Develop Bugs

after upgrading Hard-SPL-V7, no change of Bootloader

Hello,
I just posted this quesation at the
"[UPDATED]Schap's WM6 Pro 3.30c multilanguages WM6 ROMs [WWE|FRA|GER|ESN]"
Thread, but I think this is a general problem independent of that ROM... so I post it her once more.
It seems that Flashing HardSPL didn't work...
after every upgrade, there's no change, the old bootloader is still there... After every new upgrade, the upgreade utility shows the upgrade of the old one to the hardspl...
There are not really many chances to do something wrong with upgrading to Hard-SPL-V7 but something is wrong.
some more information:
It's a never before flashed, hard resetted O2 Tytn (HERM100)...
would be very appreciated to get some help. I haven't found something like that in the forum...
Thanx!

ok, it worked now... i noticed now the new bootloader... so now i can go ahead please do not ask me why it didn't work before... had to flash the bootloader many times...?!

cant get bootloader to upgrade either
dbsoundz said:
ok, it worked now... i noticed now the new bootloader... so now i can go ahead please do not ask me why it didn't work before... had to flash the bootloader many times...?!
Click to expand...
Click to collapse
I cant upgrade the bootloader. i am still searching for the hardspl v7 thread

jgaston said:
I cant upgrade the bootloader. i am still searching for the hardspl v7 thread
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=296722

Unbranded HTC S621 WM6 help...

I've read the stickied post for upgrading to WM6, but it was still a little foggy to me, so I didn't want to risk it... Then I had someone PM me, saying not to follow it, it'd brick my wifi...
I have an HTC S621 from Centennial Wireless... Not branded, on the phone or software...
Is there any information I need from my phone to know if I can upgrade to WM6? Like a ROM Version or anything?
Last thing, could someone simplify the stickied instructions for me?
ex;
1. Download these files
LINK1
LINK2
2. Run FILE1
3. Run FILE2
etc...
sorry for bein a whiney n00b

Hello,
Welcome to the forum.
do follow the stickied thread, it's the one i wrote - i don't see what's so foggy about it, everything you need is in there. use the CID Unlock from the stickied thread Excalibur USPL or something like that and it won't brick your phone nor would it hurt your wi-fi. Good Luck !

All I need to unlock on my phone is the CID yea?
I shouldn't need to SIM unlock my phone right?
I followed the guide this morning, of course I'm using Vista... so i couldn't get it to work... The WWE rom started to load, then i got an error "invalid vendor" or something...
Tomorrow I'm gonna try XP.

i know its been said before, but how do i get wm6 onto my m3100?

as above really?
ive looked all over the forum and cant seem to find anything, but im sure its probably been posted here before!
cheers

http://forum.xda-developers.com/showthread.php?t=347922

huh? where abouts on there does it have a link for a download? or tell me how to download it?

Try one of these, which one you use it up to you they are all different and its an individual choice which is best for you:
http://forum.xda-developers.com/showthread.php?t=347806
http://forum.xda-developers.com/showthread.php?t=347081
http://forum.xda-developers.com/showthread.php?t=342246
http://forum.xda-developers.com/showthread.php?t=343942
Try reading this guide 1st:
http://forum.xda-developers.com/showthread.php?t=299462

where is the guide to tell me how to acually flash my phone?
i havent a clue how to flash it!

ahh no ive worked out how to flash it, but it says i need some framework or something to run the program#?

On the PC or phone?

its ok , ive found thre framework now... i didnt read the writing your right, so just downloading that right now..
then the setup should run!

Good luck with the upgrade. Don't worry if it seems to do nothing for quite a while thats normal, don't be tempted to unplug or reboot the device. I'd recomend flashing it with HardSPLV7 1st just in case, see this thread http://forum.xda-developers.com/showthread.php?t=296722

ok im confused now...
ive read and done everything it said on that guide.. but how do i get black majik onto my mobile?

ok ive got to the bit where it says
The thread concerning this ROM contains the latest info provided by users, testers and the developers (Jasjamming) and I recommend reading through it even if you encounter no problems.
Hopefully you will have carried out the housekeeping and HardSPL steps of this guide before upgrading to Black Majik as the flashing process WILL wipe all data on your device, and by having HardSPL on it you safeguard against a corrupt CID if the process if interrupted.
Firstly download the file and run it.
i click the link to download it and it tells me its not available yet?

black majik is quite and old rom now, I recomend using a newer one. However I assume you have downloaded it to your PC and unzipped it. There should be a file called RUUWrapper.exe which you will need to run. As I said thought I would recomend flashing HardSPLV7 1st, this will help if anything does go wrong upgrading the OS.
Flashing most roms is pretty much the same as another so once you have read the guide for one you shouldbe able to flash any.
Try one of the links I first gave you to download a rom

HardSPL link: http://forum.xda-developers.com/attachment.php?attachmentid=37669&d=1177280888
Link to S64 3.62 WWE Rom: http://www.megaupload.com/?d=55WPYUAP

[HELP]HELP!!!!!

I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.

When You Type In All Caps It Makes Your Words Normalised But Every Word Has A Capital Letter
Just In Case You Wanted To See Who The Idiots Were

yuv said:
I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.
Click to expand...
Click to collapse
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.

Since you're not giving any details I don't know what your exact issue is. It depends on your Phone and where you got it.
Most likely your issue can be resolved by reading the thread which I link to in my signature.

daleski75 said:
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
Click to expand...
Click to collapse
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.

thanks alot guys. what a quick response. and sorry for the caps lock if it got u confused.
as far as the details of the phone is concerened. its an orange UK contract phone with the ROM version 1.37.405.1 WWE radio 1.00.25.03. the phone hasnt been flashed at all. i did try to flash it to _QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe but was unable to. i guess i should have hard spl it before.
i m guessing the only thing i need to do is to hard spl it right. or do i need to do something else as well.
again thanks alot guys for the quick responses.

hi tony.
i have actually tried to do it without hard spl but it would get stuck on 1%. is there any other way to do it. i believe the ROM i m trying to flash to is an official one as far as the thread i downloaded it from is concerend.

one thing to clear here. its the first time i m trying to flash from 1.37 to 1.93 official rom. could someone confirm that there is a 1.93... official rom available or is it one of the cooked ones. and could one confirm as well that i need to hard spl even flashing from oficial to official rom. coz two post before tony mentioned not to hard spl.
any ideas guys. thanks

Here's what I've just done, I hope it helps -
Vodafone UK to UK release HTC ROM.
1. I read the info here, over and over and asked lots of questions.
2. I checked the current SPL of my fone (Volume Down & Reset) and found I had 1.37.
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
4. Use RUU to flash the SPL, mine reported V1.0 as the new ROM version but installed and rebooted perfectly to reveal the coloured screen informng that I did now have a Cooked SPL installed.
5. Followed the fisrt startup procedure that the phone asked me to do.
6. Flashed the new ROM in a similar way to flashing the Hard SPL.
7. Phone flashed ok and I'm just in the process of setting it up now.
One issue I did have was using Vista I had to right click and run as Administrator to make it work.

tonyb15re said:
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.
Click to expand...
Click to collapse
wrong. if you use unsigned hardspl (aka "developer hardspl") it will flash HTC ROMs just fine
1.93 is also unsigned.

vrstu said:
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
Click to expand...
Click to collapse
who's "everyone"? this information is totally wrong, wrong, wrong.
next time you download an attachment from a post, read the post where the attachment was, and you won't have this problem (the post that had the unsigned hardspl 1.37 also talked about where to get the special SSPL RUU for it - have a guess. it is in the same post in another attachment).

Thread has been closed due to maintenance of the forum. If you want it reopened, PM a MODERATOR!

pls help me rhodium from t mobil doesnt work after upgrade to 6.5

i have a new htc from t mobile i bought it from craigslist and i was proced to hard spl by this version Rhodium-HardSPL_V2_00R3_185HSPL.zip then i have a message that mean theflashage is done then i make a update to Rhodium_AF|HTC Sense 2.5|LEO 1.43 when it finish the phone doesnt work its stoped at the white screen and stays there im too upsed help me plssss
modelid RHOD210

Ok, please come down...
Let me guide and help you...
First of all it is good that you have done Hard-SPL !
So, if you ROM went BAD and you can not do anything with your Rhodium...
There is a thing that you can do...
Please, follow those steps:
1. Take the cover of the cell phone, and search for the SOFT-RESET hole at the
RIGHT (other side from the VOLUME up/down).
2. Press the VOLUME DOWN, hold it and than SOFT-RESET.
It will take you to tree colour page for BootLoader screen.
3. Connect the device to the computer and try to Flash the ROM again
(or other ROM...).
Good Luck !!
Any help, just ask for it...

hi
Doesn't work from boot laoder too I think the is no radio flash because I can't see olinex in trial color just 5 or 6 Kobe of numr

i think the Hard SPL V2_00R3_185 file you downloaded is corrupted. i also downloaded today but couldn't extract it.

That s mean my device is brick dead

Try this: Download any GSM ROM from this forum (I like EnergyROM Leo), unzip it, and rename the .nbh to "RHODIMG.nbh" (without the quotes) if it isn't already called that. Copy that onto a MicroSD card (that is formatted to FAT32), and put that in your device. Now, go into the bootloader (power off the device, then press Power and Volume Down) then follow the instructions. Hopefully you just had a bad flash, and reflashing will solve it.

I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader

correzzola said:
I will try but I think my phone is no radio flashed yet bcuz I can't see olinex in bootloader
Click to expand...
Click to collapse
Oh, if it doesn't say 0.85.OliNex, then you're still on a stock SPL, so my suggestion won't work. Try flashing the TMobile stock ROM for your device, and retry the HardSPL process (I would advise redownloading everything to ensure it's not corrupt).

So how canine flash t mObile stock rom

0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip

this is a tricolor screen
RHOD210 32M SS-BC
SPL-0.79.0000
MicroP-Rhodium (LED) vA
MicroP-Rhodium (LED) v4
turbo HW/TURBO SW
TP MFG DATA
504,522,816,847
808,192,195,192
201,849 calibrated

and this is my start page froozen its stay here with this nuber down left
B 80
R 3.45.25.14
P 61.27t.25.23u
D Energy ROM

correzzola said:
0.79.0000 stock SPL
i have this number in tricolor that mean my device is Relocker bcuz i m was make it by RhodiumSPLRelocker_079SPL.zip so now the phone dosnt accdpte flashage by Rhodium-HardSPL_V1_20R2_185HSPL.zip
Click to expand...
Click to collapse
have you tried reflash HardSPL_v1_20R_185HSPL yet?

It also might helps you guys...
I have managed a Full Package of Hard-Spl Oilnex that WORKS!
Download the Package here...
After download and UnRAR it, you will find anything you need for Hard-Spl and the Original Tutorial
For Flash and for Stock Restore...
Enjoy!

Calm down
First of all, posting 2 new threads and commenting in the NRG thread is called spamming, stop it. It'll be much easier for you to get the help you need by sticking with one thread (I imagine the Mod is going to do that for you). Second, blasting your email address and phone number publically is bad practice, you open yourself up for a massive email spam list and phone pranks. I suggest you go in and edit your post as soon as possible and delete that information out. Thirdly, I'm guessing English is not your native language, if it isn't I suggest typing the problem out in your own language, use a translation software (I think Google Docs has this feature), and post the translation into the forum. This will help with clarity of what's going on.
Now with all that said, my final suggestion would be to tell us exactly what you have done to the phone IN THE ORDER that you've done it, up until the point that you're at now. Also, being that you bought this phone off a craigslist (another mistake imho, I'd rather just spend the extra $$ for the warranty and piece of mind that it's from the manufacturer/carrier directly), tell us what condition the phone was in to begin with. Did it come with NRGZ ROM preloaded, or the stock ROM? Was it locking up before you decided to reflash? Did you read the Flashing Guide stickied to the top of this forum before flashing your phone? (If not, let this serve as a reminder to all other newbie's looking to flash to READ BEFORE YOUR MOD!)
We're going to try and help you, correzzola, but you need to take a breath and calm down. It's just a phone, granted a lot of money, but you're not suffering onto the point of bloodshed so it's all going to be okay.

From the look of it, you HardSPL'd, flashed a cooked ROM, then removed HardSPL. Huh... that's probably not good. Try flashing this T-Mobile US ROM (I'm assuming you have a T-Mobile US TP2) while in the bootloader, and see if that solves it (or even flashes at all). If that doesn't work, I'm honestly not 100% sure what to do next, since I've never heard of anyone doing this before.

Firstly, STOP SPAMMING THE BOARD!!! - you will only annoy people and make them less likely to help you.
Secondly, Read what Dave (the Tytn Guy) has posted and let us know what happens, any more problems post in this thread and I'll see what I can suggest.
Dave

itry this rom too but doesnt work TMOUS Stock Shipped Rom 1.20.531.4 (51986) WWE

i think this step is responsable of my probleme Stock/Shipped SPL by RhodiumSPLRelocker_079SPL.zip