Develop Bugs

how can I add video calls?

I have hermes100-AT&t, i dont use it with AT&T so i have the ability to make video-calls. I have just upgraded to "Hermes_WM6_WWE_vp3G_v3.62.0_ATT_Full" but it doesnt have the video-call dial.(this is the only rom not crashing so please i would like a solution without getting diffrent rom if possible...)
can someone give me an advice?
thanks

u should really read thru the forum there are tons of postings on 3g dialer. welcome to the site. but to not get flammed i would for sure use the search function for "3g dialer"

doesnt work
thanks 4 your prompt answer, i have installed "schaps video dailer" it became purpel but the video buttom doesnt shows.
what should i do?

It was reported that none of the actual 3G dailer works on the new WM6 rom but Black's one (part1,part,part3). It can be found on the thread of my rom (near the last page I think); but it is a very very unclean way to get a 3G dialer.

fun_key said:
It was reported that none of the actual 3G dailer works on the new WM6 rom but Black's one (part1,part,part3). It can be found on the thread of my rom (near the last page I think); but it is a very very unclean way to get a 3G dialer.
Click to expand...
Click to collapse
Dialer should be located here: http://forum.xda-developers.com/showthread.php?p=1565446#post1565446
Question for you Fun_Key... What's the recommended way to load up the 3G dialer? Do you know if a package is available? I haven't had any luck with the package maker or with Schen's 3g either.
Thanks!
Quakie

Quakie said:
Dialer should be located here: http://forum.xda-developers.com/showthread.php?p=1565446#post1565446
Question for you Fun_Key... What's the recommended way to load up the 3G dialer? Do you know if a package is available? I haven't had any luck with the package maker or with Schen's 3g either.
Thanks!
Quakie
Click to expand...
Click to collapse
fun_key's method (part1,part2,part3) works fine but as he said, it seems quite an unclean way, i mean opening up the windows folder would now take me 10-12 seconds compared to previously 2-3 seconds.Aside from that, havent really noticed any other slowdown but i'd really like to know fun_key's other way of incorporating the 3g dialer....Fun_key if you could help us on this please? I noticed that u did it on the last version of ur rom and I'd really like to know how u did it...

What seems to slow windows listing is to overwrite ROM files. If the files are allready in rom, no problem.
What I did was something like that: Look into the part1.cab with a cab tool, copied all the data to the ROM and the registry. But 2 of the bmp located in the part1.cab are corrupted. You will find in a folder called wm6 extra or something like an uncorrupted copy of those file. Replace the corrupted file with the good one and you're done.
The part1,part2,part3 is an unpretty workarround to get rid of those corrupted file.
I also did some test with the beloved Kaiser 3G dialer, and everytime I made a video call my phone allmost crashed (work fine though). Any further information about this issue welcome (thread jacking on it's way )

Thanks Fun_Key! Will give it a try and see if we can come up with a new cab installer!
If anyone else has done this already, I would appreciate it if someone would let us know so I don't have to reinvent the wheel!
Thanks Everyone!
Quakie
fun_key said:
What seems to slow windows listing is to overwrite ROM files. If the files are allready in rom, no problem.
What I did was something like that: Look into the part1.cab with a cab tool, copied all the data to the ROM and the registry. But 2 of the bmp located in the part1.cab are corrupted. You will find in a folder called wm6 extra or something like an uncorrupted copy of those file. Replace the corrupted file with the good one and you're done.
The part1,part2,part3 is an unpretty workarround to get rid of those corrupted file.
I also did some test with the beloved Kaiser 3G dialer, and everytime I made a video call my phone allmost crashed (work fine though). Any further information about this issue welcome (thread jacking on it's way )
Click to expand...
Click to collapse

Please help, 3G video dialler not working for me.
Hi all.
Sorry for double posting my problem, but Fun_Keys ROM thread is now 28 pages deep, nearly 300 posts, and growing!!
This thread is relevant to my problem, so I add it here -
I have Fun_Keys WM6 1.5.2 on my UK T-Mobile Vario II hermes and after enabling the video dialling button using the advanced config tool, I still cant make video calls.
I've tried calling somebody with a 3G phone who can video dial other people. If he video calls me, he gets a service unavailable beeping sound. If I call him, I just get nothing but this dialog -
"Fail to make the video call. What do you want to do?"
Try again
Make voice call
Send SMS
Send MMS
Does anybody have any ideas what to look for to sort the problem out? I'm very new to custom 3g dialers and custom WM6 ROMs. I've taken a look around but cant find anything suitable. Its now the only thing I'm missing from the original firmware.
Any help would be appreciated.
Many thanks
Stu

the 1-3.cab worked just fine (slow but ok) thanks
the 1-3.cab worked just fine (slow but ok) thanks

Did you try the 3-cab method yet? That seems to work for everyone.
Quakie
Heliosphan said:
Hi all.
Sorry for double posting my problem, but Fun_Keys ROM thread is now 28 pages deep, nearly 300 posts, and growing!!
This thread is relevant to my problem, so I add it here -
I have Fun_Keys WM6 1.5.2 on my UK T-Mobile Vario II hermes and after enabling the video dialling button using the advanced config tool, I still cant make video calls.
I've tried calling somebody with a 3G phone who can video dial other people. If he video calls me, he gets a service unavailable beeping sound. If I call him, I just get nothing but this dialog -
"Fail to make the video call. What do you want to do?"
Try again
Make voice call
Send SMS
Send MMS
Does anybody have any ideas what to look for to sort the problem out? I'm very new to custom 3g dialers and custom WM6 ROMs. I've taken a look around but cant find anything suitable. Its now the only thing I'm missing from the original firmware.
Any help would be appreciated.
Many thanks
Stu
Click to expand...
Click to collapse

Already in the ROM?
Hi Quakie
I was under the impression that its already in my WM6 ROM because I'm using Fun_Keys latest.
Regardless, I'll try it -
Can anybody tell me where I can find the three CAB files?
Many thanks
Stu

3G Dialer
Check out post #5 in this forum. Also, the link is here: http://forum.xda-developers.com/showthread.php?p=1565446#post1565446
Quakie
Heliosphan said:
Hi Quakie
I was under the impression that its already in my WM6 ROM because I'm using Fun_Keys latest.
Regardless, I'll try it -
Can anybody tell me where I can find the three CAB files?
Many thanks
Stu
Click to expand...
Click to collapse

3G Kaiser/Touch Dialpad/Extra Stuff

Here's my compilation of the Kaiser 3G dialpad. I've taken a few of the 3G dialpads around and made one that appears to work well.
I've also attached a non-3G dialpad and a 3G Touch Comm Manager - both working well also.
Please post your feedback / results.
Here's the non-color 6 button Comm Manager as well: Download Link
Post 2 has the color version.

Here's another comm manager - this one uses the color icons from Schap's latest and very nice 4.31 ROM - please pass on kudo's to him for a nice update
One note is to say that the 3G dialpad doesn't include VTKey.exe. If the dialpad cab doesn't fully work for you, try adding this to Windows and resetting your device. I can add it in if needed.
Attched is a Task manager cab that adds the reg edit / suspend / reset function.
A link to an MMS cab if you find you need it after flashing a non-MMS ROM. ArcSoft MMS 4.2.8.1

It works like Charm to my Hermes and looks really beautiful.
Many thanks for your untired efforts...!!!!

Very grateful

mattk_r said:
Here's my compilation of the Kaiser 3G dialpad.
I've taken a few of the 3G dialpads around and made one that appears to work well.
I've installed in on my Pandora Naked 6a (non-3G) rom and after numerous calls in and out - no issues.
I've also attached a non-3G dialpad and a 3G Touch Comm Manager - both working well also.
Please post your feedback / results.
Click to expand...
Click to collapse
Looks very nice!!
Does the video part work atm?
regards!

PaY87 said:
Looks very nice!!
Does the video part work atm?
regards!
Click to expand...
Click to collapse
for me, all I get are black boxes and after a couple seconds a message that I need to switch to voice or sms. Gotta love AT&T...
In the past on other dialers, this was identical and they were reported working - so I would suspect that all is good here.

Just posted a 6 Button Comm Manager version as well.

Matt,
Re the 3G dialer, I have heard that the 3 icons that run up the right hand side should in fact sit above the numbers 1,2 and 3 so that the viewing window is larger and more rectangular. My understanding is that the way they sit in your thumbnail is a bug that needs fixing.
Is this correct and if yes, how can this be rectified? I use this dialer, configured in this way in one of Kin0kin's roms and I absolutely hate the way it is configured. Worse still is that very few other dialers will work with K's roms; therefore there is very little opportunity to go for something else, e.g Schaps video dialer, which I think is a great looking dialer.
Would appreciate you throwing some light on the visual configuration question.
Thanks
WB

i installed the touch 3g dialer on my 8525 but the numbers are not showing up properly. i have schaps 4.30 installed, do these two files not work together?

What will happen if I use that dialpad and my provider doesnt support video calls? That button just wont work?

mattk_r said:
for me, all I get are black boxes and after a couple seconds a message that I need to switch to voice or sms. Gotta love AT&T...
In the past on other dialers, this was identical and they were reported working - so I would suspect that all is good here.
Click to expand...
Click to collapse
Great to hear, I will try it tonight

cirial said:
What will happen if I use that dialpad and my provider doesnt support video calls? That button just wont work?
Click to expand...
Click to collapse
You'll get a message that 3G isn't available if you press the video button, otherwise it works like a regular dialer.

Dude you did really a good job
Tried it on my German ROM tonight and its working!!
Only the button below the video is not perfect here.
It shows the german word for "call now".
Maybe its because of the german mui files.
I always tought this button is for the last dailed numbers..
Is it right that this one is now the call button?
See screenshots..
Will test the rest tomorrow need some hours sleep atm

Thank you. It's awesome

here is another great Dialer!

Thank you. Finally got one 3G Kaiser dialpad working on my Trinity. No problem with making 3G video call as well. So far so good.

wacky.banana said:
Matt,
Re the 3G dialer, I have heard that the 3 icons that run up the right hand side should in fact sit above the numbers 1,2 and 3 so that the viewing window is larger and more rectangular. My understanding is that the way they sit in your thumbnail is a bug that needs fixing.
Is this correct and if yes, how can this be rectified?
WB
Click to expand...
Click to collapse
And the answer to this question please is.......?
WB

naveen said:
i installed the touch 3g dialer on my 8525 but the numbers are not showing up properly. i have schaps 4.30 installed, do these two files not work together?
Click to expand...
Click to collapse
No it will not work, upgrade to Schaps 4.31.

New rev of the comm manager posted in post 2.
Not ignoring your guy's issues. Hopefully I'll have a chance soon to figure out the issue and improve the install with the dialer on his roms.

Yes. I noticed that the button below the video call button is a "call" button as well. Would be nice if it is mapped to "call history" (We already have a permanent hardware "call" button). Thanks!
PaY87 said:
Dude you did really a good job
Tried it on my German ROM tonight and its working!!
Only the button below the video is not perfect here.
It shows the german word for "call now".
Maybe its because of the german mui files.
I always tought this button is for the last dailed numbers..
Is it right that this one is now the call button?
See screenshots..
Will test the rest tomorrow need some hours sleep atm
Click to expand...
Click to collapse

[REQ]: 3G OEM Dialer for Trinity

Can anyone point me 3G Dialer OEM package (I personally prefer Diamond style Phone Canvas) which behave normally in QVGA?
I've been trying for some time to build my own ROM for Trinity with only the basic stuff included.
What I miss the most (after the Camera which I recently found) is proper 3G dialer. I've tried doesens and doesens of dialers, but noone is working graphically or functionally proper.
Some dialers are behaving great, but they all have the same problem: after pressing the power button to wake the device they gain the focus and displayed onscreen. Some of them even begin dialing the last number after resume by pressing the power button. If there is no other proper working dialer ... can someone tell me how to fix this bug ?
And please don't tell me how to search the forum ... I've almost read it all article by article
P.S. Why all the cookers "protect" their ROM's from dumping? Why is this necessary? What can I steal ... isn't it all "free"?

osavioro said:
Can anyone point me 3G Dialer OEM package
Click to expand...
Click to collapse
I've attached for you 3G dialer which I've using.
osavioro said:
Why all the cookers "protect" their ROM's from dumping? Why is this necessary? What can I steal ... isn't it all "free"?
Click to expand...
Click to collapse
If you will cook roms for more time you will know why

Thanks ... I'll try it immediately!
Any chance for something Diamond & Blackstone like ?

osavioro said:
Any chance for something Diamond & Blackstone like ?
Click to expand...
Click to collapse
Sorry but I have a fully working 3G dialer, only this one I've posted...

OK ... I found the perfect 3G Video Dialer ... it works perfect ... even the video calls.
The only problem is that IT ALWAYS POPUP AFTER RESUME and EVERY 3-RD RESUME IT DIALS LAST NUMBER.
This is outrageous ... please ... anyone ... how to get rid of this problem?

tomme45i said:
I've attached for you 3G dialer which I've using.
Click to expand...
Click to collapse
It doesent work with my Trinity!

osavioro said:
It doesent work with my Trinity!
Click to expand...
Click to collapse
So flash your trinity with my rom (I have this dialer in my rom) and you will see that it work correctly

osavioro said:
OK ... I found the perfect 3G Video Dialer ... it works perfect ... even the video calls.
The only problem is that IT ALWAYS POPUP AFTER RESUME and EVERY 3-RD RESUME IT DIALS LAST NUMBER.
This is outrageous ... please ... anyone ... how to get rid of this problem?
Click to expand...
Click to collapse
sorry ... there's no way ... not at least if you're not familiar with engineering.. it's all about phcanrc.dll ... this file is responsible for layout of the dialer and the button config i guess - i replaced this file a couple of times ... if we could patch this file to work correctly on trinity we would be done...
sorrily theres no else 3g dialer that works than the one tomme45i already posted - i have tried tons of dialers with my rom - i know it
if you want it manilla style you need to replace graphics yourself ..

nosedive said:
sorry ... there's no way ... not at least if you're not familiar with engineering.. it's all about phcanrc.dll ... this file is responsible for layout of the dialer and the button config i guess - i replaced this file a couple of times ... if we could patch this file to work correctly on trinity we would be done...
sorrily theres no else 3g dialer that works than the one tomme45i already posted - i have tried tons of dialers with my rom - i know it
if you want it manilla style you need to replace graphics yourself ..
Click to expand...
Click to collapse
maybe it's not in phcanhtc.dll (main) or phcanrc.dll (resource) but somewhere in XIP/OEM. That would explain why opal's dialer works in some Hermes ROMs...

Guys, I don't know if this helps, but I've been using 3G dialer from Schen, originally made to Hermes but fully functional with Trinity (I didn't detect any major problems so far). The only minor problem I found is with battery icon; this dialer package replaces your current icon. As for the rest, very stable and functional (I'm unable to test video dialer, though; so I can't say it works, although it tries to make the call and warns about lack of 3G network).
Check here: http://forum.xda-developers.com/showthread.php?t=322463&highlight=dialer

BulldozerPT said:
Guys, I don't know if this helps, but I've been using 3G dialer from Schen, originally made to Hermes but fully functional with Trinity (I didn't detect any major problems so far). The only minor problem I found is with battery icon; this dialer package replaces your current icon. As for the rest, very stable and functional (I'm unable to test video dialer, though; so I can't say it works, although it tries to make the call and warns about lack of 3G network).
Check here: http://forum.xda-developers.com/showthread.php?t=322463&highlight=dialer
Click to expand...
Click to collapse
There are two version of this dialer. One of them goes to Windows folder and does not work either the cab or the oem.
The second version goes to a folder named Dialers. It works ... appart from the part that it is not in the windows folder and it has some minor graphical bugs. I am trying to fix it ... but without any success at the moment.
However there is another dialer that actually works: "Dialer_Touch_3G__v_2_02_By_Duronmarcel" (Attached). Converting this cab to oem does not work for me ... for unknown reasons.
"NiAx Trinity 6.1.70 BlueAngel" (http://forum.xda-developers.com/showthread.php?t=437735) uses this dialer but unfortunately NiAx is still not responding to my question.

g77 said:
maybe it's not in phcanhtc.dll (main) or phcanrc.dll (resource) but somewhere in XIP/OEM. That would explain why opal's dialer works in some Hermes ROMs...
Click to expand...
Click to collapse
Netdrg have ported opal phone canvas to trinity.
http://forum.xda-developers.com/showthread.php?t=409697
Please ask him to publish it here.
Ciao

claros said:
Netdrg have ported opal phone canvas to trinity.
http://forum.xda-developers.com/showthread.php?t=409697
Please ask him to publish it here.
Ciao
Click to expand...
Click to collapse
Unfortunately that's the old well known kaiser-style dialer with an opal-like skin, not the true dialer...
Anyway it's the closest dialer one can have in trinity for now!

g77 said:
Unfortunately that's the old well known kaiser-style dialer with an opal-like skin, not the true dialer...
Anyway it's the closest dialer one can have in trinity for now!
Click to expand...
Click to collapse
I know, true opal dialer works on trinity with our oem dll, but don't have videocall. A lot of dialer works with trinity but don't have some feature...
Netdrg have made a great work
Ciao

@nosedive
@g77
The package attached is working on Trinity.
It contains 3G (ie. video dialing functionality) but it is not active when installed (as a matter of fact I think that this is Diamond dialer but rewritten by HTC for QVGA Jade). At first I thought that it would work with Diamond Video Telephony pack ... but no luck.
There are some lines in the rgu file which contains valuable information ... maybe
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\AppView\MSCdial\{1AD110A1-B3E6-4CB9-AC0F-69E059AFBFEF}]
@="DPadMenu.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DialParser]
"DLL-OEM"="ddcall.dll"
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"ext"="\\windows\\phcanhtc.dll"
Because diamond does not have video dial button it has an option in the context menu. I think that what we are facing here is some dependancies being responsible for the lack of the video call option.
Please ... tell me what you think about that.
P.S.
This dialer always shows after resume and sometimes dials last number ... this is issue yet to be solved.
I've tried a solution posted somewhere in the forum ... something about "ShowTitleBarClock" in the registry ... don't work at all.
I've created clean ROM (nothing but the dialer) ... the same story ... this made me sure that this is not some cross-application problem.

osavioro said:
This dialer always shows after resume and sometimes dials last number ... this is issue yet to be solved.
Click to expand...
Click to collapse
I know about this problem on some dialers, but in my case, the problem was a wrong dll files in dialer. Maybe the problem is somewhere else?

tomme45i said:
I know about this problem on some dialers, but in my case, the problem was a wrong dll files in dialer. Maybe the problem is somewhere else?
Click to expand...
Click to collapse
Which was the wrong DLL ?

Another update
I've managed to pop up the "Video call" option of the Opal canvas by adding the DPadMenu.dll from HTC Diamond. Video call is still not workign but I'll test tonight with the Diamond Video Telephony pack.
The dialer is still popping for no reason

osavioro said:
Which was the wrong DLL ?
Click to expand...
Click to collapse
Honestly I don't remember... It was about 2-3 months ago. But the reason in your case could be somewhere else...

tomme45i said:
Honestly I don't remember... It was about 2-3 months ago. But the reason in your case could be somewhere else...
Click to expand...
Click to collapse
Are you saying you got opal dialer working with a dll replacement in original package? If so that's amazing man! Please try to remember which dll was

Opal phone canvas slide to answer question

I'm loving NFSFAN's new Bell ROM, but i'm not crazy about the slide to answer on the phone canvas.
I'm looking for a way to replace the slide to answer / ignore with buttons instead of a slider while keeping everything else the same.
I've researched different skins for this dialer (there are some cool looking ones out there!!) but none of these change the slider.
Any help would be appreciated.

This one works for me; http://forum.xda-developers.com/showthread.php?t=429179. There is also a black version somewhere Google 'Black Minimal Dialer'

I've now been using NFSFAN's ROM for a few days now.
Must say i've gotten quite used to the dialer. I like all of the other features. Especially the "in call curtain". While i'm still not in love with slide to answer I understand the concept of why it was created. If I want to press a button that's what the hardware key is for!!
I wasn't really looking for a new dialer, but i've learnt the slide is an integral part of the package.
Thanks for the response anyways. You were the only one to do so. (everyone else was probably busy shaking their heads!!!)

now mine might sound like a really stupid question, but can I install the opal's slide to answer dialer on my sprint htc vogue ? are all the ## codes working for you on your phone ?

Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason

thanks jmitr for your patient answer and the links to the solutions.. really really appreciate your patience and yes I just installed it and working fine now.. love the new dialer...

i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...

I know s2u2 has a large picture to answer the phone with.
I don't use it anymore, I found it drained my battery too fast. With NFSFAN's rom and the opal dialer it isn't really needed anyways.
Sorry none of the links led to anything fruitful, my only experience with this dialer is in the custom ROM. Must say it has grown on me though!!

myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I've been using this on my Sprint Touch for months now with out any issues. Here's a link for a post I have up at PPCGeeks for you to check out . Please let me know if you have any problems. If you don't want the lock feature, don't install Albert's cab...

myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I had trouble getting the dialer to work initially also. It seemed to be tied to the rom build that something changed after the 20XXX rom build was released. If I used anything earlier it wouldn't work. If your on a stock rom that may be part of the issue. Not sure, but just my experience in fixing the issue.

It is tied to a shell component.

NFSFAN said:
It is tied to a shell component.
Click to expand...
Click to collapse
Hey thanks for the reply NFSFAN, the slide to answer was the only part of your ROM that I didn't really like......at first. I couldn't imagine going back to the old dialer now.
It is good to learn what's possible and what's not though, thanks again for the answer.
Cheers,
Jason

jmitr said:
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
Click to expand...
Click to collapse
Codes don't work for me on the verizon beta rom. Is it just me or do you have to use the folder rather than the dialer?

Few unfixed problems in the kitchen

Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!

Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]

michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.

Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.

michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.

My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not

michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.

Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?

michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.

I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.

michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom

yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?

michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers

Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?

michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom

Thanks man!

Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?

michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps

Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.

I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?