Related
Hello.
After upgrading, my Universal dont boot. It's locked at operator start screen.
Hard reset dont unlock it from splash screen.
If I press (ligth + soft reset), select Clean Registry Hive and Format Storage to YES, then reboots and the screen goes to WHITE.
I dont know what is happening...
SOme help please.¡
Try putting it on Boot Loader Mode and flash it back with the old ROM.
Im sorry but the problem it's that i dont have OLD rom :x
see that: http://forum.xda-developers.com/viewtopic.php?t=43592
:wink:
see that: http://forum.xda-developers.com/viewtopic.php?t=43592
:wink:
Any of this post has worked...
Readed from beginning to end.
The Universal upgrade goes well, reboot well, but frezee at logo screen...
Any idea?
jjgarcia said:
Any of this post has worked...
Readed from beginning to end.
The Universal upgrade goes well, reboot well, but frezee at logo screen...
Any idea?
Click to expand...
Click to collapse
Have you tried flashing it back to the OLD ROM or the PREVIOUS ROM you have used and worked on your unit? Try finding another link to download your NEW ROM, sometimes files get corrupted.
I tested with a lot of roms, imate, qtek, t-mob... but nothing works,... i will try to get an original rom and flash from SD card...
get connected :?
bad bad bad, not working...
:evil:
i have the same problem i also, stuck at the splash screen. i have bootloader v1.01 i first unlocked my mda pro with the buzz programm after that i flashed wit the tmobile rom. and it got stuck i reflashed it wit my old qtek rom and it still freezes at the qtek screen.
I think the problem lies on your Boot Loader version. Most of the LATER released ROM is using Boot Loader version 1.00. So anyone who flashed their device with the latest T-Mobile ROM without removing the bl.nbf file got updated to version 1.01. Thus any ROM you try to use won't work.
Try flashing your devices back with Boot Loader version 1.0, then use the old ROMs.
Yes, i have the 1.01 bootloader...
How Can I downgrade to 1.00?
Thanks in advance¡ :wink:
Some idea in downgrade bootloader?
. .. .. .. ... .. .. :roll:
jjgarcia said:
Some idea in downgrade bootloader?
. .. .. .. ... .. .. :roll:
Click to expand...
Click to collapse
Here you go my friend. Just follow the instructions from this thread: http://forum.xda-developers.com/viewtopic.php?t=48590&highlight=boot+loader+1+00
Good Luck Mate!
The solution dindnt worked, because the COUNTRY ID¡¡¡
In the post anybody solved this problem. How can i upgrade? The MaUpgrade_NoID do NOT work.
i downgraded the bootloader tot v1.00 but it still doesnt work wit the old Qtek WWE rom is used before. what to do now...
how do you downgrade? no country-id error?
shing said:
i downgraded the bootloader tot v1.00 but it still doesnt work wit the old Qtek WWE rom is used before. what to do now...
Click to expand...
Click to collapse
You have to use the Ma_Upgrade_No_ID Tool and I made a short instructions on how to use it in this thread: http://forum.xda-developers.com/viewtopic.php?t=42784&start=50
AND REMEMBER to put your device on Boot Loader Mode before double clicking the Ma_Upgrade_No_ID Tool.
cktlcmd said:
shing said:
i downgraded the bootloader tot v1.00 but it still doesnt work wit the old Qtek WWE rom is used before. what to do now...
Click to expand...
Click to collapse
You have to use the Ma_Upgrade_No_ID Tool and I made a short instructions on how to use it in this thread: http://forum.xda-developers.com/viewtopic.php?t=42784&start=50
AND REMEMBER to put your device on Boot Loader Mode before double clicking the Ma_Upgrade_No_ID Tool.
Click to expand...
Click to collapse
yeah, i already did that, but what i wanted to say. it succefully downgraded the bootloader from v1.01 to v1.00. and it also succesully upgraded the Qtek WWE rom. but it is still stuck at the splash screen (the screen shows QTEK wit a sky background and it shows the R 1.09.00 G 42.42.P8 D1.30.77 WWE)
jjgarcia said:
how do you downgrade? no country-id error?
Click to expand...
Click to collapse
i had no country error, i put my mda in bootloader mode and i used the v1.00 bootloader upgrade from the link that the guy posted in this thread.
Due to a hardware problem in my Diamond I needed to restore it to manufacturer default. I didn't find a guide to this and since I've done the research anyway I thought I'd put together this little tutorial as the information was somewhat scattered around the forum. I hope this guide will be of use for the community.
My phone was originally branded and sim-locked by 3. After I was through with it, it was SIM-unlocked, security unlocked and had HSPL, custom ROM and a radio ported from another device. The steps below is what I did to restore it to stock. All steps might not be neccessary for you. This procedure might also work for other devices than the Diamond, but of course you need other versions of SPL, ROM etc.
1. Backup everything on your phone to your computer - use activesync, PIMbackup etc and make a copy of your Internal Storage.
2. Make a hard reset (hold vol down + enter and soft reset) and chose to format moviNAND. This step is only neccessary if you want to wipe your Internal Storage before you send the device in for repair, but I recommend it.
3. Go to www.htc.com and download the latest stock ROM (includes stock radio and SPL). You find it under Support and you enter your s/n to get the correct stock ROM for your device, complete with branding for your operator. You can also find stock ROMS here: http://forum.xda-developers.com/showthread.php?t=471699
4. Flash the stock ROM. Now you have stock ROM and Radio on your device. Stock SPL will not be installed until you've replaced HSPL with an older stock SPL and flashed ROM again.
5. Get RUU-SSPL and stock SPL from HERE:
http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. I used the stock 1.93 SPL. Some instructions and info about restoring stock SPL is in the linked post by cmonex and due credit goes to her. I will repeat some of that info to keep this guide step-by-step. EDIT: Stock SPL 2.03 can be found here: http://forum.xda-developers.com/showpost.php?p=3359191&postcount=390
6. Put the .nbh file from the SPL you downloaded into the same folder as the extracted contents of RUU-SSPL-withoutNBH.zip and run the RUU. This flashes an old stock SPL.
7. Flash your stock ROM from step 3 again. This step is neccessary to get the correct stock SPL on your device, eg. the one that corresponds with the stock ROM you've downloaded in step 3. It was not installed in step 4, because then you still had HSPL. In step 6 you've installed a stock SPL and now the correct stock SPL will flash along with the stock ROM. After this step I got SPL 2.03 on my Diamond.
8. Remove the Security Unlock from your device using the instructions and Security Relocker by Olinex from this post by cmonex: http://forum.xda-developers.com/showpost.php?p=3299516&postcount=492
Now, my Diamond is still SIM-unlocked. I have not managed to find any info about how to restore the SIM-lock, but it is hopefully not neccessary for warranty. As far as I can tell, the unlock doesn't show anywhere, but of course all they need to do is to try a SIM-card from another operator...
If anyone has info about how to restore SIM-lock, then I'll update this guide with that info.
good job...
moderator make this "sticky"
3dward87 said:
good job...
moderator make this "sticky"
Click to expand...
Click to collapse
I second that, it contains links to stock ROMs, that'll hopefully stop a million topics about it lol.
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Da9L said:
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Click to expand...
Click to collapse
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
where can i read more information about jumpspl, how it works and everything?
eranyanay said:
where can i read more information about jumpspl, how it works and everything?
Click to expand...
Click to collapse
Look in the Xda-wiki, search and google, and not just in the Diamond section.
sticky please
this needs to be a sticky topic.
losdrivare said:
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
Click to expand...
Click to collapse
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Da9L said:
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Click to expand...
Click to collapse
Sorry to hear it and I'm afraid I'm out of ideas. After all, my little tutorial is primarily aimed at those whose Diamonds have working screens...
On another note, my Diamond came back from warranty repair and the repair shop had not noticed anything that would void my warranty. In the meantime I got myself a Topaz and now I've sold my Diamond, but I'll be checking this thread from time to time.
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
donsalari said:
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
Click to expand...
Click to collapse
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
losdrivare said:
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
Click to expand...
Click to collapse
Very true!!! Ok cool... Flashing back to stock!!
Thanks..
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Da9L said:
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Click to expand...
Click to collapse
Another idea: maybe you can find some a VNC program that also works the "other way" with windows mobile, so that you can get a window on your PC with the screen of your device?
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
herpez said:
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Click to expand...
Click to collapse
k3nnyboiboi said:
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
Click to expand...
Click to collapse
If you manage to install ANY stock SPL and then flash the correct ROM for your country and operator then you automatically get the correct SPL too, since stock ROMs include SPL. If you go to htc.com and type in your s/n then you automatically get the latest ROM for your device and operator.
k3nnyboiboi said:
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
Click to expand...
Click to collapse
I only link to the SPLs provided by olipro and cmonex in the hard-SPL thread. If you need closer info about SPLs I suggest you ask there. I only tried to revert back to stock SPL 1.93 myself and it worked just like described in first post.
Thanks Op
Managed to restore it no problem, but took ages
Hi, I'm from Poland, so sorry for mistakes. I have problem with my s621. I had flashing my rom, and it wasn't finish. Now my htc when I turn it on shows only white lcd with htc logo. I turn the bootloader and try to reflash rom, but at 3 % there is an error, that is a valid id or something like that. I was trying with orginal htc rom. What Rom i soupouse to use to make reflash that rom? When boot loader menu is active on lcd is:
ONBL 1.27.0000
SPL 1.27.0000
Excalibur iu
kamykeiro said:
Hi, I'm from Poland, so sorry for mistakes. I have problem with my s621. I had flashing my rom, and it wasn't finish. Now my htc when I turn it on shows only white lcd with htc logo. I turn the bootloader and try to reflash rom, but at 3 % there is an error, that is a valid id or something like that. I was trying with orginal htc rom. What Rom i soupouse to use to make reflash that rom? When boot loader menu is active on lcd is:
ONBL 1.27.0000
SPL 1.27.0000
Excalibur iu
Click to expand...
Click to collapse
sorry for your luck! try this, I hope it helps with the 3% error!
http://forum.xda-developers.com/showthread.php?t=493266
But I can't connect my s621 with astive sync in bootloader. And it isn't an error 270, but difrent. I can't also make hard reset.
kamykeiro said:
But I can't connect my s621 with astive sync in bootloader. And it isn't an error 270, but difrent. I can't also make hard reset.
Click to expand...
Click to collapse
Turn your phone completely off. Pushing the camera button in, plug in your usb cable. The tricolor, bootloader screen will come up and you can flash your regular OEM ROM which can be downloaded from one of the stickies.
Unless your s621 has spl mod on it, you can only flash an oem rom thru bootloader.
What's the ,,OEM" rom. I do everything just like you said, I trying with orginal htc rom 1.27.405.1 and at 3% flashing there is an error 244 - this update utility cannot be used for your smartphone. Please check your update utility.... :/
try this! flash the uspl cid bypass mod, and you should be able to flash any non official(oem) rom after this.
http://forum.xda-developers.com/showthread.php?t=329605
But i need to connect s621 with active sync to flash the uspl cid. My active sync Can't be connected with my s621 in bootloader.
the one and only left thing to do, is thru bootloader, without active sync, flash an original rom from this thread if you don't already have one, and if the one you have didn't work , try another one.
http://forum.xda-developers.com/showthread.php?t=381726 < official roms>
OK, I will try every roms from that page...
kamykeiro said:
OK, I will try every roms from that page...
Click to expand...
Click to collapse
good, I usually bounce between 3 forums here(raphael/kaiser/excalibur), so if anything pm me and I'll get back to you later.
same problem here
My 621 is doing the same thing and no rom will work, does this mean the phone is absolutely bricked? Thanks.
Don't work. Again invalid ID my phone. I think I must write to htc, send serial number my phone and please them for a rom created for my id...
Very much doubt htc will be of any use since most ROMs are carrier specific.. If you know the carrier then a good search via google will probably find you the ROM?
Good luck.
I've been trying to get this Dinc 2 to work for sometime now. I bought it used so I don't know what version of software it has.
It displays the white "HTC" screen for a few seconds, then goes dark. A few seconds later the white HTC screen shows, etc etc etc. I can get into FASTBOOT with PWR/Vol-.
I've tried flashing various versions of the ROM (saving the file as PB32IMG.ZIP on the SD card). It seems to read the file but then comes up with the "wrong image" message.
The previous owner says he unlocked the the phone using the online HTC unlock, and it does say "UNLOCKED" at the top of the FASTBOOT screen. I read someplace that you had to relock the phone in order to flash the PB32IMG.ZIP file but I don't know how to do this.
I can't use ADB because I can't get my computer to recognize the phone.
Any suggestions would be greatly welcomed!
are you s-off??
tgreenstein said:
I've been trying to get this Dinc 2 to work for sometime now. I bought it used so I don't know what version of software it has.
It displays the white "HTC" screen for a few seconds, then goes dark. A few seconds later the white HTC screen shows, etc etc etc. I can get into FASTBOOT with PWR/Vol-.
I've tried flashing various versions of the ROM (saving the file as PB32IMG.ZIP on the SD card). It seems to read the file but then comes up with the "wrong image" message.
The previous owner says he unlocked the the phone using the online HTC unlock, and it does say "UNLOCKED" at the top of the FASTBOOT screen. I read someplace that you had to relock the phone in order to flash the PB32IMG.ZIP file but I don't know how to do this.
I can't use ADB because I can't get my computer to recognize the phone.
Any suggestions would be greatly welcomed!
Click to expand...
Click to collapse
are you s-off? If not then you cannot flash PG32IMG.zip (it has to be PG32IMG.zip not PB32IMG.zip) try installing these drivers: https://www.dropbox.com/s/kg37o7tsn3dq1nt/HTCDriver3.0.0.007.exe
then boot into fastboot and connect your phone to pc. the phone should display fastboot usb from there you can flash rom via adb.
remember if you don't have s-off and bootloader says unlocked then refer to this guide for flashing roms : http://forum.xda-developers.com/showthread.php?t=1435228
EDIT: did you flash a rom which caused bootlooping??
ArslanQureshi said:
are you s-off? If not then you cannot flash PG32IMG.zip (it has to be PG32IMG.zip not PB32IMG.zip) try installing these drivers: https://www.dropbox.com/s/kg37o7tsn3dq1nt/HTCDriver3.0.0.007.exe
then boot into fastboot and connect your phone to pc. the phone should display fastboot usb from there you can flash rom via adb.
remember if you don't have s-off and bootloader says unlocked then refer to this guide for flashing roms : http://forum.xda-developers.com/showthread.php?t=1435228
EDIT: did you flash a rom which caused bootlooping??
Click to expand...
Click to collapse
I'm S-on.
ADB doesn't work. I can't boot into Android.
I didn't flash a rom on this phone; I can't get past the bootlooping. I doubt the previous owner flashed a rom, either.
tgreenstein said:
I'm S-on.
ADB doesn't work. I can't boot into Android.
I didn't flash a rom on this phone; I can't get past the bootlooping. I doubt the previous owner flashed a rom, either.
Click to expand...
Click to collapse
in that case you can try to install an ruu.......... (I think I told you this before also) www.androidruu.com/getdownload.php?...ivo_W_Gingerbread_S_VERIZON_WWE_5.10.605.9_Ra dio_1.09.01.1111_NV_VZW1.92_release_225831_signed.exe just boot into fastboot and run this exe
ArslanQureshi said:
in that case you can try to install an ruu.......... (I think I told you this before also) www.androidruu.com/getdownload.php?...ivo_W_Gingerbread_S_VERIZON_WWE_5.10.605.9_Ra dio_1.09.01.1111_NV_VZW1.92_release_225831_signed.exe just boot into fastboot and run this exe
Click to expand...
Click to collapse
Nope. Apparently version 6.04.605.07 is installed, and the bootloader won't let me install an older version. And there apparently is not an RUU for 6.04.605.07 (if anybody knows of one, please let me know).
Hey guys i've checked the similar threads for answers before posting and was wondering if someone can help me with the similar problem.
I was rooted with s-on and tried to revert back to stock, so relocked the bootloader and now i get an error message and can't unlock the booatloader again.
Error message reads this:
"Security checking failed NOT_FIND_SMART IO
FILE /mnt/media_rw/ext_sd/OPJAIMG.zip
File NOT FOUND
I've tried everything that i could think of in FASTBOOT,
I can't get into custom recovery, can't rebootRUU because just sticks at HTC splash screen, every time i try to unlock the bootloader i get as far as the yes or no part but then it fails to unlock in download mode and won't even do it in the normal fastboot mode.
I've tried on both mac and windows and nothing works apart from getvar all and fastboot devices, i have a memory card of 32gb and and a adaptor i can plug into my laptop if that helps?
If there is any more information that i am missing, can you please let me know, i really want to get this phone sorted without having to pay to get it sorted from htc.
Thanks
Travis
travjay said:
Hey guys i've checked the similar threads for answers before posting and was wondering if someone can help me with the similar problem.
I was rooted with s-on and tried to revert back to stock, so relocked the bootloader and now i get an error message and can't unlock the booatloader again.
Error message reads this:
"Security checking failed NOT_FIND_SMART IO
FILE /mnt/media_rw/ext_sd/OPJAIMG.zip
File NOT FOUND
I've tried everything that i could think of in FASTBOOT,
I can't get into custom recovery, can't rebootRUU because just sticks at HTC splash screen, every time i try to unlock the bootloader i get as far as the yes or no part but then it fails to unlock in download mode and won't even do it in the normal fastboot mode.
I've tried on both mac and windows and nothing works apart from getvar all and fastboot devices, i have a memory card of 32gb and and a adaptor i can plug into my laptop if that helps?
If there is any more information that i am missing, can you please let me know, i really want to get this phone sorted without having to pay to get it sorted from htc.
Thanks
Travis
Click to expand...
Click to collapse
If adb is okay then try flashing TWRP and go from there if successful. Have a read of my post here.
Tirofog said:
If adb is okay then try flashing TWRP and go from there if successful. Have a read of my post here.
Click to expand...
Click to collapse
Hi I've tried to flash in fastboot as the device won't boot so I could use adb. I've relocked the bootloader as I was about to go back to stock. The only process I haven't done yet that I can think of is running the ruu.exe on my computer, but I'm having trouble finding the ruu for Europe as all the links I try are either broken or they say the file doesn't exist anymore.
Is it possible to flash a ruu through fastboot while on relocked bootloader.
Also I've tried to OEM unlock the bootloader but that doesn't work either.
Thanks for your reply, much appreciated.