Related
(Formerly "Dump Sorter" and "XipDumpSort")
New and Improved - Much more functionality than the old one!
I'm trying to make this a general cleaning\sorting\worker app for processing dumped folders. If you'd like a feature added, please let me know.
What is it?
This is a simple program designed to take the hard work out of rearranging, cleaning and merging dumped ROMs with Kitchens.
What can it do?
Clean - Removed all files with the same name as their directories (This is very useful when converting files to modules)
Sort - Files and Folders can be sorted by:
Ervius Kitchen's folder format
osKitchen's folder format
By comparing to a donor folder (should work with any kitchen)
Unsort from:
Ervius Kitchen's folder format
osKitchen's folder format
Merge missing file and folders from a donor directory (useful when the dump is missing files\folders) (SVN Directories are ignored ('.svn' and '_svn'))
How to install
Click the 'Install' button at http://vidmes.com/dumpsorter/publish.htm
(In order to use the 'launch' link, you need to be using IE)
(Alternatively, just use the zip below)
Notes
Merging is done last, so if the donor directory is 'dirty', this 'dirt' will be copied across
This requires .NET 3.5
Also attached is the source code (for anybody interested) - the project was built using Visual Studio 2010, so it may not open in older versions of VS
Known Issues
Things to do
Get a logo\icon
Ability to pull data from archives (eg zip, rar and 7 zip)
Changelog
Version numbers: <installer version> (<executable version>)
* 0.3.0.3 (0.3.3796.19478)
Fixed: Settings in ComboBoxes would not save (e.g. language, resolution, etc)
WARNING: Upgrading to 0.3.0.3 will wipe any of your current settings
* 0.3.0.2 (0.3.3789.38088)
Fixed: Bug where the 'Browse' button for selecting the donor folder to clone didn't do anything
* 0.3.0.1 (0.3.3734.42067)
Added: Support for OndraStar's osKitchen (sorting, unsorting, creating blank folders)
* 0.3.0.0 (0.3.3733.25038)
Added: Ability to unsort from Ervius format
Added: Ability to only sort DPI\RES\LANG that you actually want
* 0.2.0.1 (0.2.3518.38275)
Added: Ability to invert log
Added: Update log on the fly (instead of at the end)
Fixed: Progress bar go to 100% when complete (or reset afterwards)
* 0.2.0.0 (0.2.3516.36999)
Added: Ability to create a default folder layout for Ervius SYS
* 0.2.3516.24314
Added: About box
Fixed: Merger now ignores SVN directories ('.svn' and '_svn')
* 0.2.3516.23053
Added: Cleaner (remove files with same name as directory)
Added: Sorter for Ervius SYS format
Added: Merger (file and folder)
Fixed: Sorter now removes 'unsorted' directory if it is empty
* 1.0.3509.31117
Fixed: Browse buttons now re-enable after sorting is complete
* 1.0.3497.39310
Initial release
thanx Mr Moderator
its very usefull
WOW!! This is an awesome tool. I'm definitely gonna be giving it a try. Thanks
EDIT: Works perfect
This thing is awesome. It's perfect for organizing SYS folders for any kitchen based on ervius's visual kitchen.
Hello,
Thanks for this tool, it's really nice!!!
Just small thing added to your code :
Code:
void bgwDoSorting_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
txtLog.Text = (string)e.UserState;
pgbrStatus.Value = (e.ProgressPercentage > 100) ? 100 : e.ProgressPercentage;
}
and :
Code:
//old : bgwDoSorting.ReportProgress(workDone * 100 / workTotal);
bgwDoSorting.ReportProgress(workDone * 100 / workTotal, result);
I also reverse the log to have latest lines on top (log+newline instead of newline+log)
Thanks for the great job!!
very nice, thanks for sharing!
DarkAngelFR said:
Hello,
Thanks for this tool, it's really nice!!!
Just small thing added to your code :
Code:
void bgwDoSorting_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
txtLog.Text = (string)e.UserState;
pgbrStatus.Value = (e.ProgressPercentage > 100) ? 100 : e.ProgressPercentage;
}
and :
Code:
//old : bgwDoSorting.ReportProgress(workDone * 100 / workTotal);
bgwDoSorting.ReportProgress(workDone * 100 / workTotal, result);
I also reverse the log to have latest lines on top (log+newline instead of newline+log)
Thanks for the great job!!
Click to expand...
Click to collapse
I was considering that, but I think you'll find it will run a bit slower (due to having to constantly update the log box). Then again, if you have a dual processor machine (and who doesn't?), you probably won't notice a difference.
Any chance someone would also be interested in writing a batch file or simple program to delete duplicate files inside of a folder? ie: if there happened to be files inside of the module folder as well as the actual module files. So for example "tapres.dll" module folder for some reason has "tapres.dll" file inside. Would need to got hrough whole SYS though.
I am testing it now....
Pretty cool set of resources...thanks
Point of Sale.
jmckeejr said:
Any chance someone would also be interested in writing a batch file or simple program to delete duplicate files inside of a folder? ie: if there happened to be files inside of the module folder as well as the actual module files. So for example "tapres.dll" module folder for some reason has "tapres.dll" file inside. Would need to got hrough whole SYS though.
Click to expand...
Click to collapse
Sure
Maybe I can change my sorter into a cleaner as well...
Any other 'common tasks' I should include?
Perhaps a tool to merge missing folders into the sorted folder? (eg if the new SYS or OEM is missing stuff from the old one)
TehPenguin said:
...Any other 'common tasks' I should include?...
Click to expand...
Click to collapse
Good ideas...
Maybe I add one : default template folder, for example specify DPI, RESV/H and Lang code(s) then go should be usefull when adding a new language to an existing kitchen who don't have the full folder structure yet for the new language
If you need help do not hesitate!
PS: about performance, as you said everyone have dualcore computers at least so backgroundworker + log refresh is not slowing the process, and if it is it's not really visible (I'm not working on 1000000 files for 1000 languages so...)
I've rebuilt the backend to be more 'flexible' (ie custom workers and sorters).
I will build the cleaner and the extra sorter some time soon and have it posted up - don't expect anything too soon though...
Attached is the updated source code
(You should be able to tweak the .sln file to work in Visual Studio 2008)
Very good application but I can not use it, can you set it to work with .NET 2 ?
sIiiS said:
Very good application but I can not use it, can you set it to work with .NET 2 ?
Click to expand...
Click to collapse
I suppose....
Although why not install .NET 3.5?
TehPenguin said:
I suppose....
Although why not install .NET 3.5?
Click to expand...
Click to collapse
Because .Net3.5 has big size for me and members like me to download and install and if I install it, can I remove my .NET2 and .NET1 or need them too for other programs?
Now I have .NET1,2,3 but not .NET3.5
.Net 3.5 include 2.0 but you don't need to remove 2.0 before installing 3.5...
If you use windows update it will be big but not as big as if you download the full package from microsoft (it will just take kind of missing parts)
I like the way microsoft made all this framework, you can setup 3.5 without any problem to your existing 2.0 (or 1.1) applications.....more and more programs are using it so it's not a time loosing install for me..
New version released!
Dump Sorter now has all of the features requested.
From the changelog:
* 0.2.3516.24314
Added: About box
Fixed: Merger now ignores SVN directories ('.svn' and '_svn')
* 0.2.3516.23053
Added: Cleaner (remove files with same name as directory)
Added: Sorter for Ervius SYS format
Added: Merger (file and folder)
Fixed: Sorter now removes 'unsorted' directory if it is empty
Nice i saw your announcement in the release and came to see it... downloading and testing in the next release i seton the kitchen... maybe the tutorials will be useless ... Thanks a lot man!!!
hey there
Thanks for this update, will test today...
Missing screenshots on 1st post lol
what about using ClickOnce so we can have auto updates of the program? If you need help hosting I may help.... I love programs I like to be auto updated and it's really a small thing to do with VS (never tested with 2010)
Keep the good work, looks like we are coming to a complete "pre-kitchen tool"....
there is no official development-kit to create and test flash-panels on the X1.
i did however manage to collect, compile and modify all necessary files to do
this on an X1-device. you do not need any fourther software except for the
Flash CS3 or CS4 suite.
X1-FlashPanels-Development.zip is attached below and contains all the tools,
documentation and samples to start developing:
Folders:
\Documentation\*
all necessary documentation (guidelines, api reference, ...)
\FlashPanelExample Source\*
FlashLite3.x Sample Application Source (.fla)
\FlashPanelizer\*
the "Panelizer" tool to create an installation (.cab) file
\X1-Setup-Files\*
the activeX_deployment (flashlite plugin) and the flash-panels device API
QUICK GUIDE:
- install all files in \X1-Setup-Files\ on your X1-device
(this enables your X1 to handle flash-panels created with the "Panelizer" tool including the device-API)
- use Flash CS3 (or higher) to create your flashlite3.1 application (.swf)
(at first you may want to work with the FlashPanelExample.fla)
- use the Panelizer to create an installation file (*.cab) from your *.swf
- install your *.cab on your device
- add/select the new panel with the panel-manager
feel free to post some feedback here if you have managed to create your first panel.
have fun,
- quadword
([email protected])
*Updated Attached File*
- added fake-classes (to remove the errors while publishing the example .fla).
- QuadWord
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CLICK HERE FOR THE XDANDROID 2.2 PROJECT
XDANDROID 2.1 AOSP
Welcome to the official XDANDROID thread which is dedicated to getting Android running on our beloved HTC devices.
So far devices supported are raphael|fuze|diamond|blackstone|topaz|rhodium
Over at the vogue forums, Zenulator has just released an updated version for Android. Codename Eclair, it brings Android to 2.0.1
Since then it has been bumped up and based upon Manup456 port. Many thanks
Stinebd has recently built an 2.1 AOSP build from source for those who want to use a clean 2.1 build. The current builds are based on the AOSP and we are waiting for 2.2 source
Phhusson: has dedicated most of his time helping users and updating kernel to run Eclair and his work for other msm7k devices. However phhusson is not alone as there are also other members working on this. You can find some of them on http://www.htc-linux.org. I've listed some of the developers i know of that currently are working on and they deserve credits and thanks. We also have to note that before this work done there was quite a substantial number of people starting working on linux for our devices. Without them we may not be where we are today. So respect and credits to everyone involved in working on linux kernel for msm devices.
I am not responsible for any damages or problems your device encounters. The build is relatively safe and shouldn't cause any problems.
Dedicated threads
Dedicated threads for other devices running XDANDROID
Diamond500
Raphael800
Blackstone
Topaz
RhodiumThread1
RhodiumThread2
xda-developers signatures
For everyone posting on this thread about problems and issues, I urge you to please specify you're device or more conveniently update you're signature in control panel so it always has the details at the bottom of your posts.
FAQ
This has lots of Q&A and is recommended to go through before posting bugs and problems
XDANDROID project wiki huge thanks to sd73ta for hosting
Android questions and general FAQ
Connect-utb help section
RaphaelEclair-wiki
Media Scanner fix
For people who have problems with no having no ringtones, notification tones or general music problems look here:
MediaScannerFix
Waiting for SDCard error
For people who have problems with sdcard message, add this to your startup
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
Overclocking Android on MSM7K
MSM7K Android OverClock
XDANDROID boot-Animation | Wallpaper contest
XDANDROID wallpaper | boot animation contest
TheDeadCPU video for XDANDROID
XDANDROID initial-bootup
XDANDROID booting on HD2 NEW!
Thanks to
phhusson, zenulator, Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, bzo, captainoord, glemsom, balsat and anyone else who contribued or who i forgot
Thanks ben_duder for the awesome sig
Donations:
Please consider a donation to the XDANDROID project. We work on this on our spare time, even not on our spare times and every little bit gives us more inspiration and motivation to continue providing you our friends awww* great builds and support
Thanks to from me and phhusson:
R^7Z | auss81 | Sergej Philipp | Malte Lewan | suksanto | Tyler Brixey | axelo | ElbertF
w3bm4st3r | Kenny Maples | Daniel Krebs | Dan Colardeau | Ghostdogg | Gregory Thomas
Vincent Paoli | nim_ayyan | mindfrost82 | Olivier van der Kruijf | Robert Russell
Kamil Kowalski | Tobias Kästle | Scrog | Mehdi Bouzakri | Jay Onisch | Daren Scroggie
Robert Batty | James Frank | Matthias Helfmann | colo-natas
dcb.insomniacsoft.com | Alexis Perez | Ann Marie Steichmann | Cristian Pereyra
Adam Williamson | Benedikt Wieloch | Brad Stage | Paolo Vernazza | CDK Hosting
Haicheng Wang | Jonas Lejeune | Haicheng Wang | Jonas Lejeune
Adrian Kajda | Wilson Seto | Pedro Aragao | babijoee (yup, myself XD)
Spread the word about xdandroid, please feel free to use this sig created by ben_duder
Working:
Touchscreen:
Vibration:
Capacitive Buttons and Navigation wheel
Keyboard
Radio
Brightness Control: Must turn off autolight in WinMo
GPRS (thanks Phhusson )
Microphone works
Charging (phhusson )
Market
Sound ( Phhusson )
debugging breathing led for sleep mode: lets you know when your device is sleeping. This shouldnt affect your battery life at all.
Wifi: was always on when enabled. Now it is used alot less often so the device will be warm at most. (phhusson)
Task killer app.
Android information program.
Gsensor: fixed
Power collapse
Proximity sensor
ramzswap
idle sleep mode
deep sleep: Remove pm.sleep_mode=X from startup.txt if you have it in your default.txt
Accelerometer fix: Now very accurate and shouldn't cause your device to randomly change view. Thanks to mmone3
sms fix: yep the one you guys have all been waiting for ( thanks phhusson )
Android system wide Mic support. Eg: Voice dialer works. (phhusson)
14.01.10
updated apns.xml ( hopefully this should fix some 3g/GPRS issues people are having )
Fuze keyboard layout: (Stinebd)
Updated generic Raphael layout with better keymapping
15.01.10
Power off should work now (MrPippy)
Tested and working on Raph100. Raph110 doesn't work. Weirdly doesnt work for raph800. Please dont post bugs and errors about this or you will be flamed :3
Keyboard arrows for fuze, raph users should now work. (Stinebd)
Fixed layout for 500,800 CDMA
Mapped PTT button for fuze only. (Stinebd)
16.01.10
Old plus new apns.xml merged plus some extras.This should re-enable data connection people had before but broke now. For people who never had data connection this may help or may not.
New RIL: now has geolocation: (Chamonix)
Apps now separate for people who want to choose what to put in Android. Will be placed within AndroidApps folder
Live Wallpaper ( Battery drainer )
Matrix code
Bubbles
Star field
22.01.10
Proper Backlight control: dimming and controlling brightness. No need to change in WinMo anymore (phhusson)
Updated RIL: force cdma option, for cdma topa/rhod since we have no way to detect that they are cdma
Slow sim option to slow down SIM access, I think this might fix the problem of people having crashing android with bad sims (phhusson)
Updated apps
Startup cmds:
force_cdma=1
slow_sim=<time in microsecond to wait between every SIM access)
24.01.10
Clean Build
AndroidApps now consists of 4 folders
Ring Delay set to 0 from 3000 milliseconds
Updated startup configs
System is definantly faster when stripped
(Copy the applications you want to the root of AndroidApps. For people who dont know what core files to copy, i suggest you copy them all)
Core
Games
Media
Others
Nexus One media
Audio
Resource
2.02.10
touch screen calibration tool (makkonen & phhusson)
tilt2 keymap (adamw)
sensors for rhod/topa
LedEffect included in apps for diam/raph (chamonix)
Update by leobaillard
04.02.10
ShootMe ( AndroidApp to take screenshot via shaking phone )
Merging the massive apns.xml direcly pulled from my nexus one into current one. I hope fixes data for some people
Overall smoother scrolling. (Stinebd)
Rhod210 keylayout (adamw)
Double RAM implement in kernel.
08.02.10
hw3d ( MrPippy & Phhusson )
Ramzswap: ramzswap settings from user.eclair.conf are applied ( Phhusson )
Wifi changes ( Phhusson )
No longer need wifi calibration file. it's readen from nand, and is written to data.img ( Phhusson )
Updated ledeffects ( Chamonix )
Calibration file will be removed in future XDANDROID packages.
27.02.10
Bluetooth via new rootfs
Use Home++ as base launcher
Battery Indicator to show 1% increments in notification panel ( Note to ignore it in advanced task killer to keep service alive )
Topaz sensors added ( Markinus )
Latest updated rootfs
Removed gtalk, googlevoice for a very special members request
Added Genie widgit ( thanks for wpbcubsfan for extracting from nexus one )
Changed default lcd.density to 240. Majority android devices are using it even my nexus one
1.03.10
Slightly updated raph800 startup.txt ( Makkonen )
Slightly updated apns list for cdma networks ( Makkonen )
Readded gtalk, gservices apks
Removed topaz custom g-sensor and integrated with default one ( Markinus )
Updated Topaz startup.txt
Fixed Market downloads problem
31.03.10
Added DeskClock apk
Added calculator apk
Readded Gallery apk
Updated Home++, BatteryIndicator, Advanced Task Killer, AndroidInfo
Added OI file manager
Removed Astro File manager ( due to trial expiring and long waits )
Added updated version of Facebook
Updated STARTUP CONFIGS
Removed google Maps to save 3mb space
Bundled with balsat zImage autobuilds without debugging for speed
03.05.10
Based on Stinebd MSM 2.1 AOSP XDANDROID
Updated hosts file to block ads in apps (delta_foxtrot2. Updated version by phaelox)
home++, Battery Indicator, IO file Manager, Advanced Task killer, XDA forum app
Updated ledEffects (charmonix)
Nexus Boot Animation
Nexus media
Fixed Startup configs
11.05.10
GPS ( phhusson , cr2, jonpry )
31.5.10
Readded Google Maps since we have GPS support now
Replacing default Music app modd by cacheinjection
Adding new launcher LauncherPro 0.3.0
Removing home++ as i think LauncherPro is quite awesome
Updated xda app, advanced task killer, OI file manager, Battery Indicator
12.6.10
Updated APN list from cynaogen nexus one rom
Using LauncherPro beta as default launcher
Removing default launcher
Updating music application
Removing apps from /system/app to AndroidApps on SD
Implementing test boot animation from lugiber [ NOT FINAL ]
Removing BatteryIndicator as reading are not accurate and always jumping.
Updating startup files
Removing livewallpaper picker and livewallpapers as they dont work at the moment.
Support for non ascii characters
Nordic raph keylayout
Uploading ext2 file for people using ext2
21.6.10
Updated build.prop
Updated Launcherpro to latest
Added libspeech for voice search support
Added 3D driver for 3D support
Removed Advanced Task killer
Not Working
Camera/videorecord
Removed
light sensor
Added but not yet released
Terms and conditions
Enjoy and remember to post some feedback.
Downloads
Bundles
21.06.10 | 2.1 builds NEW!
XDANDROID.2.1.AOSP.21.6.10
The latest release of XDANDROID for AOSP 2.1 based on Stinebd AOSP build kitchen.
System
Old builds can be located here
htcandroid.xland.cz
4shared.com
Here is a repositories for older releases of XDANDROID and Android1.6 donut files
zImage Autobuild: ( glemsom / balsat )
glemsomAutobuilds
balsatAutobuilds
zImage are updated quite often but just because its updated, it doesn't necessarily mean it will work 100%. If a new zImage breaks and doesn't boot; load a previous working zImage. thanks
Rootfs Autobuild ( Stinebd )
RootfsAutobuilds
Get the latest rootfs here from the rootfs build service provided Stinebd for XDANDROID
Initramfs Autobuilds ( Stinebd )
InitramfsAutobuilds
Get the latest Initramfs here from the Initramfs build service provided Stinebd for XDANDROID
Others
WinMO/Android dual-boot
Yozgatg dual-boot
Yozgatg has released his dual boot WinMo / Android program for everyone to enjoy
LiteWM ROM to autoboot linux
LightNHB boot
MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android
CAB-Install for XDANDROID
Automated cab-install
TheBrilliantMistake has made a convenient program for people out there having installation problems with XDANDROID.
Have a look and see if you like it. If this proves successful we may roll out the updates like this in the future.
Chamonix ledEffects
LedEffects
LedEffects controls how your device reacts to calls, messages, charging and other phone status'
Guide
Place everything into the root of your sd card for Raphael and Everything in your internal memory for Diamond. Remember to copy the correct startup from the startup config folder.
It should look like this
--root--
\AndroidApps
\conf
\media
-haret.exe
-initrd.gz
-rootfs.img
-system.ext | system.sqsh
-zImage
-modulesXXXXXXXXXXX
-startup.txt
Startup|default configs options
Overclocking
acpuclock.oc-freq-khz=XXXXXX ( i use 600000 )
but it very unstable if you try to get higher than 650000-700000
Physical Keyboard layout
physkeyboard=fuze
physkeyboard=raph
physkeyboard=nordic_raph
physkeyboard=tilt2
physkeyboard=rhod210
physkeyboard=rhod100_de
physkeyboard=rhod100_fr
physkeyboard=rhod100_it
physkeyboard=rhod100_uk
physkeyboard=rhod100_nordic
physkeyboard=rhod400
physkeyboard=rhod500
Button wake up
board-htcraphael-navi.wake=X
0 = screen only wakes on power button
1 = wakes on any keypress
Onscreen terminal keyboard
msmvkeyb_toggle= (on/off)
on = displays terminal onscreen keyboard
off = hide terminal onscreen keyboard
Headset
snd.force_headset=X
1=USB headset
2=3.5mm headset
Incall volume adjust
htc_hw.call_vol=X
0-5
Enable/Disable handsfree
htc_hw.handsfree=X
1
0
Recommended best loud and clear voice values are said to be 5/1
htc_hw.call_vol=5
htc_hw.handsfree=1
LCD density / resolution
lcd.density=XXX
210 = 640x480 VGA devices
240 = 800x480 WVGA devices
Load Haret
Load haret by going into FileExplorer and navigate to where haret is and load it.
Navigation
Note: This is a dummy screen i took from google images Its not actually looking like this
1. Power Button
Press: Go home screen
Hold: Switch between Application
2. VolUP
Press: Increase ringtone, media and incall volume
3. VolDown
Press: Decrease ringtone, media and incall volume. Can also set vibrate and Silent.
4. Home Button
Press: Open up setting
5. Call Button
Press: Open recent call
Hold: Launch Voice dialer
6. Back Button
Press: Goes back one previous screen
7. Call end Button
press: Turn off display or end phone call
Hold: Set audio on or off, Airplane mode or turn off device
8. Center Button
Press: Accept or select. Also used as scrolling, zoom in or out.
9. Android Menu tab
Pull up or down to open / close Program tab
10. Notification tab
Pull up or down to open / close notification tab
11. USB
Plug in USB for adb, USB debugging, charging
Useful links
XDANDROID Facebook fan page
Stinebd blog
BugFeatures and Request
Phhussons git repo
Phhusson wiki
Nice to see someone contributing for the Raphael side of the forum, as i always felt why is support so good on the Vogue for Android? Why does Sense UI, most Android related etc. work on Vogue, well nvm. Looking towards the new build, nice work.
[email protected]
RAPH110 not working
I had tried it two days ago with kernel 2009-12-13 and the original files and got freeze at the setup screen on my RAPH110.
Procedure was as depicted and after deleting data.img.
At the top of the frozen screen there was the "no network" sign and I did not get the usual sounds of GSM network handshake in my loudspeakers so the hang seems to be in really early stage. That was weird enough to mention because on donut the radio turns on before the GUI comes up.
It could be Android initializing hardware that our kernel does not yet support. All i can think of is GPS and camera. But i'm going to stick with GPS for the time being. As data connections can be disabled and other hardware is at a functional stage.
my device is resetting at the android splashscreen, I had one time where I've seen the setup page. but then freeze and reset...
I don't know if its a problem but my diamond isn't detected in this build, it's detecting a vogue. So probably its loading false drivers?
the recognition is in the rootfs
These are really good news!
I'm glad to see some one looking into this! I own a raph100 and (needless to say) i got no further than you guys. But is there some way i can provide information? I'm no programmer but if there is any way i can help let me know!
/P
will try this on my diam100 ... i will only have to change the system.sqsh right ??? and keep all the other files
TQ
cruzzmz said:
will try this on my diam100 ... i will only have to change the system.sqsh right ??? and keep all the other files
TQ
Click to expand...
Click to collapse
I hope my guide was easy to understand . Its pretty much like any other build. The two main files are system.sqsh and rootfs.img. Kernel is always from glemsom autobuilds and the basefiles should provide the rest.
Razzee said:
my device is resetting at the android splashscreen, I had one time where I've seen the setup page. but then freeze and reset...
I don't know if its a problem but my diamond isn't detected in this build, it's detecting a vogue. So probably its loading false drivers?
the recognition is in the rootfs
Click to expand...
Click to collapse
same behavior when recognizing diamond.
is there a logfile anywhere or an option for one? so that we can see at what task it fails?
You can setup adb, which will let you see what task is being run. I've been reading into it and will set it up soon. As this would surely give us a better detailed diagnosis.
Eclair on RAPH100
Tested on my RAPH100 and got stuck on the setup screen too :-(
Offering a Diam100 to test
Hy guys! I offer a diam100 to test. Im not much of a programmer.
I offer my diam100 to do any test. At the moment i've tried and when i have "android" letters on screen, after 20 seconds the system reboots and enter into Windows mobile again. I'll be awake, every new version i'll try it and post feedbacks. Thanks for building.
Jordi
Spain
pik0n said:
At the moment i've tried and when i have "android" letters on screen, after 20 seconds the system reboots and enter into Windows mobile again.
Click to expand...
Click to collapse
Same problem here, after the SMD ch 0 closing -> opening and SMD ch 0 opening -> opened messages it resets.
I haven't tried the kernel flashing from the androidinstall package, for I'm a bit scared to brick my phone (though I'm not scared to flash it when I know it's quite safe )
Greetz
p.s. running on wm 6.5.3 (28011) if it matters.
Anyone have any luck with ADB, Windows7 and XP both say the android is an unrecognized device and it won't allow me to use the usb_android drivers that came with ADB.
jamen said:
Anyone have any luck with ADB, Windows7 and XP both say the android is an unrecognized device and it won't allow me to use the usb_android drivers that came with ADB.
Click to expand...
Click to collapse
nvm, i was missing 'board-htcraphael.adb=1' in the startup.txt almost got it working now!
it's pity i can not download all files.
Hi, since the kernel is shared between raph, diamond & blackstone, I tried it on my blackstone.
It did not work either, but I managed to save the debug output.
I've attached it here, in case it helps you.
aavan said:
Hi, since the kernel is shared between raph, diamond & blackstone, I tried it on my blackstone.
It did not work either, but I managed to save the debug output.
I've attached it here, in case it helps you.
Click to expand...
Click to collapse
What occurs to me is:
Code:
12-18 13:35:09.058: INFO/ActivityManager(160): Start proc com.android.setupwizard for activity com.android.setupwizard/.SetupWizardActivity: pid=221 uid=10023 gids={3003}
12-18 13:35:09.228: ERROR/jdwp(221): Failed sending reply to debugger: Broken pipe
and later at the end:
Code:
12-18 13:35:17.428: DEBUG/BT HSHFP(210): Starting BluetoothHeadsetService
12-18 13:35:17.478: DEBUG/MobileDataStateTracker(160): default Received state= DISCONNECTED, old= DISCONNECTED, reason= gprsDetached, apnTypeList= default
12-18 13:35:18.438: DEBUG/GoogleLoginService(243): onBind: Intent { cmp=com.google.android.googleapps/.GoogleLoginService }
12-18 13:35:18.458: DEBUG/dalvikvm(210): GC freed 3317 objects / 237640 bytes in 895ms
12-18 13:35:18.528: WARN/GoogleLoginService(243): Device has no accounts: sending Intent { act=com.google.android.googlelogin.LOGIN_ACCOUNTS_MISSING }
It looks like the last sequence of actions were to find out there is no google account set up, with the reaction to call the Intent googlelogin with LOGIN_ACCOUNTS_MISSING. I guess the right reaction to that would be to request for login data.
Not that does not seem very hardware dependent to me so I'd rather bet the the freeze is due to something initiated earlier, maybe "Starting BluetoothHeadsetService". Looking at what happens in that process (pid=210) this looks like a weird path:
Code:
12-18 13:35:16.008: DEBUG/(210): unable to unlink '/data/data/com.android.phone/shared_prefs/_has_set_default_values.xml.bak': No such file or directory (errno=2)
Where is /data mounted and was there something created in /data/data?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Twitter:
@rsstab
RSSTab Update Feed:
Meltwater's Sense RSSTab Release Feed - Will be updated each time there is a release!
Project Release Thread:
XDA: RSSTab Project - Release Thread - The latest release cabs are here! (This does not apply to the betas yet)
Project Online Code Page:
CODEPLEX: HTC Sense RSS Reader Tab
Project Wiki Page:
XDAWIKI: Sense RSS Tab Project
Project Donations:
PAYPAL: Developer
meltwater
Latest Info
12Oct2011 - Facebook has altered the authorisation slightly, so manual paste method needs a little extra care (details here - Thanks to Nullstring).
(19Sep2011) "Facebook" Theme Released
(5Aug2011) Release 4.Beta.1 Details here
(12June2011) Release 4.Beta.0 (298views) Details here
(05June2011) Stable Release 3.0 (CodePlex 8974) Details here
(02June2011) Release To do list
(01June2011) Big Development Announcement - Facebook Integration
(10May2011) 3.Beta.2 [Released] (115 views) Details Here
(28April2011) 3.Beta.1 Released (In-App Update Only - minor changes) Details Here
(26April2011) 3.Beta.0 Released Details Here
(14April2011) (140 views) Beta Countdown To-do List posted!
(24thFeb2011) Release Thread started
- The focus of this thread will now be development, allowing general Q&A in the release pages.
- Don't be scared to post in either thread (I monitor both)!
- I may start to release beta versions in this thread for testing
(31stJan2011) Release 2.2.2 (cabs on release thread or available in codeplex [6377] (zip 503 views), Theme-able Version Rev2.2.2) - meltwater_RSSTabV2.2.2&SenseUtil.cab (662 views) meltwater_RSSTabV2.2.2(SeperateCabs).zip (304 views)
(27thJan2011) Easy Cab Install Test - Please let me know if it works or not!
(26thJan2011) Release 2.2.1 (attached (views 50) [6309] or available in codeplex, small fix+german lang Rev2.2)
(25thJan2011) Release 2.2 (attached [6226] (19views) or available in codeplex, see Release 2.2 Notes)
(20thJan2011) Release 2.1 (attached [6048] (77views) or available in codeplex, see Release 2.1 Notes)
(23rdDec2010) PreRelease Beta2.0B (attached [5534] (237views) or available in codeplex or Captain Throwback Cab)
(22ndDec2010) PreRelease Beta2.0 (attached or available in codeplex or Captain Throwback Cab (see install post #4))
(11thNov2010) 11th Nov 2010 Available - Minor Update
(10thNov2010) Captain Throwback Cab (see install post #4)
(9thNov2010) WIP 9th Nov 2010 Available - Release Candidate Codeplex Release Page
(3rdNov2010) WIP 3rd Nov 2010 Available
(22Oct2010) WIP 22nd Oct 2010 Available
(7Oct2010) WIP 7th Oct 2010 Available
(6Oct2010) New Screenshots Animated Gif Screenshots [Large]
(5Oct2010) WIP 5th Oct 2010 Available
(4Oct2010) WIP 4th Oct 2010 Available
(1Oct2010) WIP 1st Oct 2010 Available
(29Sept2010) Codeplex: Project Code Page - HTC Sense RSS Reader Tab
(1Sept2010) RSS Feed Item Display Form Requested...
(25Aug2010) Graphics Resizing Code Requested... + Updated Developer Pack attached + added Control Design Ideas to wiki.
(from now on - additional baselines will be released separately to the pack - but the old pack needed fixes)
(24Aug2010) Icon Graphics Requested... +1st run by another user!
(23Aug2010) Project Update
(19Aug2010) Project Launch, Wiki Open for ideas etc [Sense RSS Tab Project], Developer Package attached (731 views)
Welcome to the RSS Tab Developer Thread.
This latest release of the RSSTab is now available.
Please read the Install instructions carefully and if you have problems feel free to post questions.
There is a user manual available in the wiki page, so if in doubt have a read of that.
NOTE:
Like most RSS Readers, the software will open up data connections to download related images.
Please ensure you are aware of your data connection settings to avoid data charges from your carrier.
The installation, the use &/or miss-use of this software is at your own risk.
This software is provided as is & without liability.
Reverse engineering or modification of the binaries is prohibited.
By downloading/using this software you accept these terms, regardless of if you choose to read them or not.
Introducing the RSSTab
Click on image to see Large Size Version
Author Request - Posting on other sites or building in ROMs
I am happy for the tab to be included in ROMs and links to this thread posted on other sites, however, I do request that feedback is relayed back here so I can see what issues people are having. This is the responsibility of either the original poster or ROM Author to do this, to help me with development.
In particular:
1. language display issues, which I can not see as my ROM only supports english chars and I subscribe to english feeds.
2. install problems - it is something which I hope is almost resolved (using Captain_Throwbacks cabs, senseutil and the shortcuts), if not then we will need to know. Hopefully the newer builds are easier to cook too.
3. problem feeds - I wrote the RSS reading code quite early on, so it was rough and I only had limited methods I knew worked in compact framework, if there are issues I may revisit this code and improve the way it works.
Also it would be nice to post links to these sites on here too, common issues/solutions etc can then be viewed by all.
What can it do?
Once setup, the tab will display your list of feeds from the RSSHub directly in sense and allow you to view the list of items in the feed and then you can view a particular item and/or play a previously downloaded podcast file (video etc).
The tab is very much under-development, which means I am focusing on building in the important functions and features at the moment.
Presently, the tab will not change anything in your RSSHub files, so an unread item will stay unread and your files will not be harmed (the tab will only create some thumbnails etc in sub directories of the Channel Data folder). The exception to this is if you have donated and received a donate code, then you are able to disable the read only mode (which is experimental).
If you have a particular feature you would like added, then please add to the "To Do List" within the Wiki page or Code-Plex To-Do list.
Thread Quicklinks:
Rev 4.Beta.1 Release from Post#911 Onwards...
Rev 4.Beta.0 Release Facebook Integration Discussed from Post#838
Rev 3.0 Release Discussed from Post#789
Facebook Integration Announcement from Post#772 Onwards...
Rev 3.Beta.2 Release Discussed from Post#744 Onwards...
Rev2.2.2 Release Discussed from Post#600 Onwards...
Releases/Development Plan Links
Installation Instructions (Must read before install)
Theme, Icons & Colours Links
Language File Support Information
Thread Tips/Guides:
XDAWIKI: Sense RSS Tab User Manual
XDAWIKI: Sense RSS Tab Theme Page
[Q] Can you recommend some good RSS feeds? - Includes details on adding Facebook, Twitter and Google+ RSS Feeds
XdaTV/YouTube Channel Podcast Links
Thanks to:
The main problem is simply time, all coding takes lots of it and sense coding even more so. Obviously donations help greatly, be it donations of time to help with installation issues, testing and translations OR motivational money donations (be it $1 or $10) [I am saving up for something to help me with development] it all provides a boost which will drive me to work further on the project and shows me that the project is a worthwhile use of my time.
Donating to the project (money/time/skill/charity) will entitle you to a "Donate Code". If you've donated, send me the code from the "Advanced" settings page and you will get a code for your device. The "Donate Code" will allow you to use the experimental features which I am currently working on (use at your own risk as many of these will change the RSSHub data store - backups are recommended).
Experimental features include, updating feeds directly from the tab, setting items as Read/Unread and facebook api enabled facebook feeds. This is my way to return back something to those who invest in some way in the project, if you are unsure of how you can do this, then please let me know.
Donations:
JDog2pt0 (21/10/2011)
dale5804 (27/08/2011)
1sin (9/8/2011)
ct_moi (1/8/2011)
jivkonik (2/7/2011)
osiedacz (24/6/2011)
user_99 (19/6/2011)
Eddie Dickens (16/6/2011)
lcd4linux (13/6/2011)
Skrobel (7/6/2011)
timjarsky (9/5/2011)
unknown XdaId (5/5/2011)
Laurentius26 (27/04/2011)
sharkie405 (27/01/2011)
Captain_Throwback (23/11/2010)
JVH3 (16/11/2010)
Cabs+Installs:
Captain_Throwback
Testing:
zard, Captain_Throwback, mike2nl, winderp, colossus_r, ric69
Language Files:
(zh-cn) winderp, (es-es,es-es_tradnl) amno1970, (de-de) SteveP86 & user_99, (fr-fr) mickey & ric69, (zh-tw) boa19861105, (it-it) bbonzz, (pl-pl) Budniu
Code Tips/Help:
eboelzner+greenhacks(Sense Looknfeel SDK), emuneee (itemwebview), joe_coolish (debugfile), johncmolyneux (filedialogue), Captain_Throwback/Co0kieMonster(sensehelp), Drakknar (fbtab/rsstab banner)
Everyone behind the kitchen (without which I would have got no-where):
12aon, 6fg8, chainfire, sztupy, Co0kieMonster etc
Plus anyone else I've forgotten...
Thanks even if I've not mentioned by name, for all help, testing and support.
Let me know if I've missed you off the list, thank you for donating (in this case, your time and effort!).
See post #4 for install links & instructions (must read before installing).
Note:
The cab files required for installing the "release version" of the tab are located on the release thread
meltwater_RSSTabVX.X.X(SeperateCabs).zip below contains the cab file for installing the tab and senseUtil to assist with registering it with Sense.
rsstab-xxxx.zip below contains the files required for manually installing the tab.
Link to EXT file, TO BE DETERMINED
NOTE: rsstab-8974.zip is Stable Release 3.0 (CodePlex 8974)
To save time, I don't usually release the Beta versions as ZIP files, but feel free to open the cab and extract the files if you need to.
Development Progress
For the current to do list, or to add your own suggestions, please visit the wiki page:
XDAWIKI: Sense_RSS_Tab_Project#To_Do_List
OR
CodePlex : Next Release To Do List
Check the quick links for details about the latest release.
Release 31st Jan 2011 - 2.2.2
Fix for feeds which are not in a category (2nd try)
Text Theme/4F9BE867_manila Working
Release 26th Jan 2011 - 2.2.1
Fix for feeds which are not in a category
+german lang Rev2.2
Release 25th Jan 2011 - 2.2
New: Filter Feeds
Updated language files 2.2 (fr-fr & templates)
appRSS.reg Updated to link to RSSHub by default (assumes windows dir installed location)
----------------
Like most RSS Readers, the software will open up data connections to download related images.
Please ensure you are aware of your data connection settings to avoid data charges from your carrier.
The installation, the use &/or miss-use of this software is at your own risk.
This software is provided as is & without liability.
Reverse engineering or modification of the binaries is prohibited.
By downloading/using this software you accept these terms.
_____________________________________________________________
Code:
Release 20th Jan 2011 - v2.1
Experimental ReadAll/UnReadAll (activated with donate code)
Single feed display fixed
Updated language files
(22ndNov2010) PreRelease Beta2.0
"Pre-Beta Samper/Taster"
This initial build should be considered a development version and work in progress, I intend to make several updates to it before it can be considered a proper release as several sections are not quite finished, however it should be quite usable.
New features:
1. Lauc Theme file [759E7B43_manila] for font colour changes
2. Settings Pages:
Tab Settings:
a. Fixed header position [loading feedback not completed yet, plus highlight selection not completed yet]
b. Item View Mode Selection - allows the different methods to be tried (OpenNetCF is the latest one)
c. Selection of stylesheet for item view
File Path Settings:
a. Register the app's location with the registry
b. Define/Select the app shortcut
Advanced:
a. Reset the tab data (should clear out the RSSFeed registry values, leaving only settings behind, plus should then reload the channel data)
b. Advanced settings (as the FbTab, allows the harder options to be shown)
c. Language file selection.
d. Donation Code Function
3. Highlight of unread items
4. OpenNetCF Browser - with my own custom gesture support (needs fine tuning but the principle is swip left/right to go to next or previous item - eventually will define the direction via a user setting, up/down will do nothing at the moment, there is also a special diagonal gesture which will toggle the fit to screen mode - again possible to detect each of the 4 diagonal directions). It's experimental, but is usable.
WIP - 11th Nov 2010 (Very Minor)
RSSUtil
1. Fixed exception on incorrect DataFeed location.
2. Added new language files fr-fr, zh-tw
[B]WIP - 9th Nov 2010 (RC?)[/B]
Manila
1. Lang Files - All updated to have IDS_RSSTITLE at the top (ensures title is populated on 1st run). Plus added translations for zh-cn, es-es/es-es_tradnl, de-de, cs-cz (many thanks for the translations).
2. Updated example 26948339_manila Tab Control file to have IDS_RSSTITLE.
3. Improved item selection handler (should avoid jump back on Channel List on 2nd item selection - when scrolled down)
RSSUtil
1. Support for "gb2312" encoded files.
[B]WIP - 3rd Nov 2010 (Major Update)[/B]
Manila
1. Selected Slider Icon Included
2. Details text resized when media icon present
RSSUtil.exe
1. Added language file templates.
2. Split out NativeWebBrowser (thanks to emuneee) into dll (may replace at some point)
3. Now using "Release" build
4. Added external WebViewStyle.css file support
5. Fixed reg issue on open of DebugPage on clean System
6. Added extra checking of Selection Item number (avoids erroneous loads of channel list by mistake) - will log when this occurs.
7. Attempt to convert PST/CET/xxx etc time zone information
8. Initial work on gb2312 encoding (needs testing)
[B]WIP - 22nd Oct 2010[/B]
(Small update)
RSSUtil.exe only!
1. Changed close method for RssTabItemWebView (need check this fixes issue - wasn't present for me in first place)
2. Better Icon for RSS Feed Item view (top header)
[clear out the [\Storage Card\]Program Files\RSS Hub\ChannelData\FeedIcons directory and it will generate new ones as and when they are needed.]
3. Extra debug in file
[B]WIP - 21st Oct 2010 BIG UPDATE[/B]
RSSUtil
1. meltwater.apiLang.dll - updated for multiapp support.
2. feed reading improvements
3. image resizer improvements
4. settings page reset channels
5. Sense DateTime support
Sense
1. New layouts
2. Rss Tab Menus
3. GTX Theme support in lauc file
4. Sense DateTime support
[B]WIP - 15th Oct 2010 - BUILD DIR ONLY[/B]
Again, work is in-progress for a lot of this, still got a few items which aren't quite completed.
RSSUtil.exe
1. Implemented developer mode
(to shut off WIP sections)
2. Testing ItemView - alternative browser
(requires checking on problem devices - note links don't work yet, feedback please on if it works)
3. Better Settings Page for 1st release
4. Added Meltwater.ApiLang
(needs additional work to support both tabs - plus any other app)
SenseRSSTab
5. Implemented developer mode
(to shut off WIP sections)
6. New install message
7. Update bar position can be controlled
(i.e. not moved by new fb events...)
8. DEV ONLY: Fixed position header (to keep feed feed title at the top - disabled for now)
[B]WIP - 7th Oct 2010[/B]
1. Reg file corrected
2. 5D3CA1C8_manila - en-us lang file started
3. Regkey view on debug page
4. Started development of local image/html cache (inprogress)
5. Better feed support, plus improved handling of failed read
6. Testing fixed font size in style sheet on ItemView (will see if it helps)
7. Read File test file default to Ch160.xml (was Ch199.xml for last release by mistake).
[B]WIP - 5th Oct 2010[/B]
1.Changed log file to store a single days actions
(hopefully will remain small enough)
2. Better PageLevel setting
(old debug test commands weren't setting them)
3. Better handling when a feed is not present
(will ignore the feed and not change pagelevel)
4. Correctly error message path info
(path was repeated)
[B]WIP - 4th Oct 2010 V3[/B]
1. Extra exception handling...
[B]WIP - 4th Oct 2010 V2[/B]
1. Improved ItemView!
2. Attempt to stop null exception...
[B]WIP - 4th Oct 2010[/B]
1. Removed the need to have Ch160-Logo2.img
(can be removed from "RSS Hub\ChannelData" location. No longer used by tab.)
2. Added RSSIcon.png to "RSSUtil\Icons"
(Ensure you include this in your directory. Used as default header icon.)
3. Header now should populate with FeedIcon or Default RSS Icon.
4. Added debugging #define
(will keep enabled at the moment) which generates "RSSUtilDebug.xml" in "\RSSUtil\". Please include if you get exception errors etc, more debug will be added as we go)
[B]WIP 1st Oct 2010[/B]
1. Tab auto-refresh working
(blank feeds not handled yet but process will support it now)
2. Resize of icons for the list is working
(still some resizing done by sense due to aspect ratio issues)
3. Changed command pop-up to registry value RSSFeed.LastApiCall
(has less impact on tab function)
[B]WIP 29th Sept 2010[/B]
1. Initial attempt at auto-refresh (some issues to work out)
2. Pop-up of last command sent (to help debug auto-refresh issues)
3. Tests of image resize (plus downloadfile code to try)
4. Custom commandline in DebugPage (to help debug auto-refresh issues)
5. Script to update build dir
6. Removed Obj directory (generated by build)
[B]OLD WIP BUILDS:
20100826B - WIP.zip[/B] (104 views)
FIXED - B version:
Corrected detection of not finding the required file.
DONE: Support feed list with sense links to/from feeds
Implemented:
1. I've removed a bit more of the hard coded info from the feed details and removed the title for every item in the item list.
2. Navigation to/from channel list is working (with manual update only)
- Load up the channel list (from running RSSUtil.exe), wait for waiting icon to finish and press Update Now button to reload screen
- Select feed item from channel list to load data for that feed, wait for waiting icon to finish and press Update Now button
- Select header from Rss feed item list to reload the channel list, wait for waiting icon to finish and press Update Now button
[B]20100826 - WIP.zip[/B]
DONE: Add code to remove any extra registry items not replaced when updated with new data
[B]BASELINE: 20100825-Sense RSS-ChannelList.zip[/B]
25Aug2010
DONE: Read channels from RSSHub opml file (works, but needs improvement - categories are combined with feeds) Purely manual operation.
24Aug2010
DONE: Removed copy of facebook data to registry when no feed data is defined (code was from initial testing).
23Aug2010
DONE: Implement launch media from icon [working!]
DONE: Transfer settings page from facebookUtil to allow developers to create new settings & use LangAPI. [Done but no "real" settings just transferred code]
20Aug2010
DONE: Changed colours to (RSS) orange [R242 G125 B50] from (Facebook) blue.
DONE: Added app launch keys for easy running of Support app.
RTFM - Read The Fantastic Manual
The Fantastic Manual:
Follow the link below to get to the user manual wiki, if you spot something which is wrong or you would like to improve then please go ahead (that is why it is a wiki).
XDAWIKI: Sense RSS Tab User Manual
Installation
Installation Instructions:
Follow the link below to get to the Installation Instructions wiki, if you spot something which is wrong or you would like to improve then please go ahead (that is why it is a wiki).
XDAWIKI: Sense RSS Tab Install Instructions
Note: Install instructions have been moved to the wiki, please visit there for the latest info
illi's 2.2.2 EXT file for cooks, available from here. Only use if you know what you are doing and know how to cook roms.
Also if you've tried it, please let me know if it works or not and I'll update the package/instruction if needed.
You can manually update to the very latest build/development by downloading the current changeset file from the CODEPLEX Project Page or using this direct link: http://rsstab.codeplex.com/SourceControl/list/changesets#.
The files need to simply install and run the tab as it stands are contained within \Build\..., the folders structure shows where each of the files should go (Note: Sense will probably need a reset and the tab must already be added to sense).
Remember this is a development project, so if something doesn't work, then it probably just doesn't work but please post details on the forum if it appears to be an error.
Themes, Icons & Colours
Themes, Icons & Colours
Cabbed Theme's should work with previous versions of the tab, but best support is with Release 3.Beta.1.
Installing Cabbed Theme's
Install the theme cab to the same location as you installed the RSSTab (check this using your file explorer if you are not sure).
After installing a theme cab, you must "Reset Sense", this is achieved by using SenseUtil and pressing the "Reset Sense" button.
If you see two icons on the sense slider, you will need set the option to remove the icon within the Tab Display settings (with Advanced enabled). [Not available yet - so remove 5AB7F814_manila from your \Windows\ directory (and restart sense).]
Note: Once you have installed a theme, you must then reinstall the Default theme if you remove it (you don't need to reset sense until you've installed the default theme). You must do this, unless your tab came "cooked" into your ROM, but I would still advise installing the default if you've since updated the tab.
If you update the tab then you will need to re-install your theme, as the files involved will be replaced.
Official Themes
Default Theme
meltwater_RSSTabDefaultTheme.cab
"Green" Example Theme
meltwater_RSSTabGreenTheme.cab
"Facebook" Example Theme
meltwater_RSSTabFacebookTheme.cab - Replaces the RSSTab Icons with Facebook Tab icons and text colour to facebook blue.
Info for theme developers
Theme Cab Files
The theme works by directly replacing the files which define the text colours and graphics, so it is important to remember that when a theme is uninstalled it will also remove these essential files (unless they are present in the ROM).
When generating a theme cab file, please ensure the Company Name is set to "RSSTab" and the Application Name is "Theme". This will stop more than one theme being installed at the same time, so that uninstalling one does not remove the files installed by the other.
Recommended Screenshots
Please provide sceenshots with your cabs if possible, I recommend one of the "Channel List", one of the "Feed List" ideally with podcast icons, and one of the "Item View" if you've changed the CSS file.
Developers Pack
meltwater_RSSTabThemeDevPack.zip
The developer pack contains the source for both the Default and the "Green Example" theme. If you do create a theme, even if it is a "default" for your ROM, then please ensure the name of the cab file is clear that it is a default for that ROM in particular.
Lauc Theme File (Text Colours)
Example "Green Theme Text Theme File"
Although lauc code can be quite difficult to follow, the code used for the theme file is simply assigning the colours to the required variables, so it isn't too difficult to understand.
The Colour is set by:
Color(40, 100, 60, 255) == Color(RED, GREEN, BLUE, ALPHA)
Note: The ALPHA channel is not always used for text, so it is left at 255 (the max value).
To pick your colour values, you can use sites like:
http://www.colorschemer.com/online.html
Code:
-- File name: 4F9BE867_manila \windows\htc\People\Scripts\People\rssTheme.luac
trace("[RSSFeed] 4F9BE867_manila \windows\htc\People\Scripts\People\rssTheme.luac Example")
local col_vdarkGreen = Color(40, 100, 60, 255)
local col_darkGreen1 = Color(100, 255, 140, 255)
local col_lightGreen1 = Color(200, 255, 200, 255)
local col_lightGreenDull1 = Color(150, 255, 150, 255)
local col_darkGreen2 = Color(100, 255, 100, 255)
local col_lightGreen2 = Color(200, 255, 120, 255)
local col_lightGreenDull2 = Color(180, 255, 71, 255)
Theme_RSS_TitleName_Unselected = col_darkGreen1
Theme_RSS_TitleName_Selected = col_vdarkGreen
Theme_RSS_TitleDetailUnread_Unselected = col_lightGreen1
Theme_RSS_TitleDetailUnread_Selected = col_vdarkGreen
Theme_RSS_TitleDetailRead_Unselected = col_lightGreen1
Theme_RSS_TitleDetailRead_Selected = col_vdarkGreen
...
The file then needs to be compiled using the CommandLine Manila Kitchen or similar.
If you have difficulty using the Manila Kitchen etc, then simply post your lauc file on the thread and I (or anyone else who spots it) can compile it for you.
This section will be updated soon for 3.Beta themes
Follow the link below to get to the Sense RSS Tab Theme Page wiki.
XDAWIKI: Sense RSS Tab Theme Page
Users are able to change the graphics, text colours and item view page theme (see above link for full details).
For now, you can visit some initial themes:
Sharkie's Black and Gold, Blue and White, Man on Chair
RSS Tab Important Files:
Sense Tab Files:
Code:
TabControl:
26948339_manila
Graphics:
0E8DE6B8_manila \windows\htc\Common\Assets\Images\Common\RssFeedline.qtc [thin line]
[ATTACH]437917._xfImport[/ATTACH] 5AB7F814_manila \windows\htc\Assets\Images\Manila\icon_on\RssFeed_tray.qtc [tray icon active - Not required for NRG ROMs]
[ATTACH]437918._xfImport[/ATTACH] 6A42A5E4_manila \windows\htc\Assets\Images\Manila\icon_preview\RssFeed_large.qtc [preview icon]
[ATTACH]437919._xfImport[/ATTACH] 6C1F1212_manila \windows\htc\Assets\Images\Manila\icon_off\RssFeed_tray.qtc [tray icon inactive]
[ATTACH]437920._xfImport[/ATTACH] 2202FA31_manila \windows\HTC\Settings\Assets\Images\rearrange\rssfeed.page.qtc [rearrange icon]
45154810_manila \windows\htc\Common\Assets\Images\Common\VGA\RssFeed_divider.qtc [update bar]
Luac Scripts:
476C4205_manila \windows\htc\people\scripts\people\rssfeedpage.luac
0D4FCC6F_manila \windows\htc\people\scripts\people\rssfeedpage_Landscape.luac
Mode9:
26774112_manila \windows\HTC\Manila\rssfeedicon.mode9
6B54437C_manila \windows\htc\people\RssFeed.mode9
XmlPage:
RssFeed_Pages.xml
Language Files:
Manila Language files are defined in Post#7 below.
Registry Keys (Items are out of date, but the idea is the same):
Code:
[HKEY_CURRENT_USER\Software\HTC\Manila]
RssUtil app launch (for testing):
"RSSFeed.LaunchAppSel"=dword:0
"RSSFeed.LaunchAppName0"="RSS Util Debug"
"RSSFeed.LaunchApp0"="\\Program Files\\RSSUtil\\RSSUtil.exe"
"RSSFeed.LaunchAppArgs0"=""
"RSSFeed.RSSUtilExe"="\\Program Files\\RSSUtil\\RSSUtil.exe"
"RSSFeed.FeedDataStore"="\\Storage Card\\Program Files\\RSS Hub\\ChannelData\\"
data item display (may not keep them all):
"RSSFeed.nName"
"RSSFeed.nDetails"
"RSSFeed.nFileLink"
"RSSFeed.nIcon"
"RSSFeed.nStatus"
"RSSFeed.nTime"
Code:
display control:
"RSSFeed.ItemCount"=n
"RSSFeed.ViewMode"
data header display:
"RSSFeed.FeedTitle"
"RSSFeed.FeedDetails"
"RSSFeed.FeedIcon"
Page control:
"RSSFeed.RefreshState"
0 - None [Set by SenseTab following screen refresh]
1 - Wait for RSSUtil [Set by SenseTab following request which needs new data]
2 - Processing data [Set by RSSUtil to indicate it is working on getting the data]
3 - Data ready [Set by RSSUtil to indicate it has finished and SenseTab can
refresh the screen]
"RSSFeed.PageLevel"
2=feed list [view of each of the available feeds]
1=item list [view of all the items within a feed]
0=item detail [view of a particular item within a feed]
- may need to change depending on what levels we put in
(the moment - level 0 - item detail I think will be handled within the supporting
app rather than attempting to display within sense).
Theme:
"Theme.Gtx"
Not present or 0 = non-GTX
1 = GTX Theme (applies only to lauc script, mode9 files still need to be replaced)
Debugging keys:
"RSSFeed.LastApiCall" - info only, to help with debugging (set whenever the
RSSUtil is called by the tab)
"RSSFeed.Debug_HIT" - records if we have selected the right side "Icon" or co-ords
of the hit position on the reset of the item
"RSSFeed.Debug_Y" & "RSSFeed.Debug_X" - records of the position of the
"mouse" when item is selected
there are others which are used for debugging and testing at the moment.
Language Files
Language Files
Please note:
If you are editing the tab control file (26948339_manila) or language files, it is recommended you use an editor which supports the following format:
Line Endings:Unix(LF)
Encoding:UTF-16 Little Endian
Editors such as Programmers Notepad and Notepad2 appear to work well.
If not, then simply post the file when you are done and I will convert for you.
To create a language file, use one of the language files as a template.
Alternatively, you need to determine the manila name (using ManilaHash.exe (part of the Manila kitchen package), file-names are listed below):
1. Lookup the filename for your language and use that file. Use something like win-merge to identify any new entries in 5D3CA1C8_manila (en-us) file (which the master file which will always be up to date with the latest revision).
2. Add the new entries and your translations as you wish (Make sure you use UTF-16 Compatible Editor)
Sense requires the following file format:
Line Endings:Unix(LF)
Encoding:UTF-16 Little Endian
Any entries which are not translated in the file, will have <!--en-us--> before them. Once you have translated the entry, remove this comment on the line.
3. Update the rev number to match the revision you have updated to:
<trans-unit id="IDS_RELEASE_VERSION">
<source>Rev 0 - Template</source>
</trans-unit>
4. Upload to this thread, and it will be added to the list.
[Note:The tab name IDS_RSSTITLE is specified in the another file, see the SenseUtil thread for details on this (Language Title Files section).
Post any updates to that thread and they will be included]
Language File List (Beta Builds):
Names are generated using ManilaHash (\windows\htc\people\locales\nl-nl\rssfeed.nl-nl.xml -> 45C5183A_manila)
Unless otherwise stated, the un-updated files are templates (untranslated en-us) currently at Rev4.Beta. If you get IDS_ values displayed then you will need an updated language file.
In future I will not be updating the template files, and they will not be included in the install (this allows sense to use the default - en-us file).
en-us --> 5D3CA1C8_manila #### MASTER FILE (Rev4.Beta) - WILL ALWAYS BE UP TO DATE IN THE BUILD ####
en-gb --> 52BB74CA_manila (Rev4.Beta)
cs-cz --> 103878F8_manila (Rev 3 (+fb) - thanks to jirkab)
de-de --> 66FAC0B6_manila (Rev 3 (+fb) - thanks to SteveP86 Saugbaer User_99 (+BeeGee_Tokyo))
es-es --> 501DCF32_manila (Rev1 - thanks to amno1970)
es-es_tradnl --> 467C6FDA_manila (Rev1 - thanks to amno1970)
fr-fr --> 4B7197B2_manila (Rev 3.Beta (+fb) - thanks to mickey ric69 (+romualdrichard))
pl-pl --> 5C21E5C2_manila (Rev 2.2 (+fb) - thanks to Budniu (+Skrobel))
zh-cn --> 24E697B8_manila (Rev1 - thanks to winderp)
zh-tw --> 1378D3AC_manila (Rev 2.2 (+fb) - thanks to wstephen boa19861105 (+mudhi))
sk-sk --> 6DD27BCA_manila (Rev 3 (+fb) - thanks to juben (+pa3x))
it-it --> 0CB20886_manila (Rev 1 (+fb) - thanks to bbonzz (+etoy & Drakknar))
## Rev 4.Beta - Template (+fb) ## - Template files where I've been able to pull in fbTab translations for some parts!
nl-nl --> 45C5183A_manila (+mike2nl)
el-gr --> 23A721E6_manila (+colossus_r)
pt-br --> 2E511842_manila (+dotcompt)
pt-pt --> 5AF6D7E2_manila (+dotcompt)
nb-no --> 233D596C_manila (+agaPer)
hu-hu --> 115E4006_manila (+zoliwr)
ru-ru --> 012E43AE_manila (+Bumeranghc)
## Rev 4.Beta - Template ##
ar-sa --> 58934920_manila
ca-es --> 29FB788A_manila
da-dk --> 10CD3B3A_manila
fi-fl --> 4F878394_manila
ja-jp --> 48821D9C_manila
ko-kr --> 668F3B00_manila
ro-ro --> 220E8E16_manila
sv-se --> 5C82DDD4_manila
tr-tr --> 67FB366A_manila
Beware of the first line --> Normal is:
<xliff version="1.0" lang="en-us">
It should match your Lang!!!
Then translate the entries i.e "RSS Tab Settings" and "Settings Page Disabled":
Code:
<trans-unit id="IDS_SETTINGS_TITLE">
<source>RSS Tab Settings</source>
</trans-unit>
<trans-unit id="IDS_SETTINGS_DISABLED">
<source>Settings Page Disabled</source>
</trans-unit>
Then copy back to your \windows\ folder (and post on this thread).
When people have performed translations, I'll post up the completed files here.
Note:
I've added the following entry to help track the versions of the language files:
Code:
<trans-unit id="IDS_RELEASE_VERSION">
<source>Rev 4.Beta</source>
</trans-unit>
<trans-unit id="IDS_LANG_AUTHOR">
<source>lang file authors</source>
</trans-unit>
Every time I update the language file in a release (En-Us) (add or change a translation) I shall try to remember to increment the release value - this way people should be able to update the language files each time. If another language file is updated (i.e. to correct a translation, the Rev should be set to "Rev 1A", "Rev1B" etc.), or if entries are added to match the En_Us release then increment the Rev#.
When I enable the settings page I'll display the Rev number of the selected language file so it will be clear if the file is out of date (hopefully this will work ok).
RSS is main app to use on my HD2. (use spb news now)
Are this app using the sense SDK to build?
I think I interesting on this app, will spend some time to have a look if i have.
mike3000c said:
RSS is main app to use on my HD2. (use spb news now)
Are this app using the sense SDK to build?
I think I interesting on this app, will spend some time to have a look if i have.
Click to expand...
Click to collapse
I expect the supporting app will use sense SDK when a visual interface is required for settings etc, however the part of the project within sense has to be created using manila mode9 and lauc scripts which is different to sense SDK (sense look and feel for .net apps).
at it again, I see!
Hey melt - another great idea.
Curious - are you going to start with this as you did with the FB tab, using HTC's code as a basis? As I'm sure you know, the OBOE Sense has a scrolling RSS Feed on the Home tab, using RSSReaderService.dll as the service that runs it. Is that where you're starting, or are you basing this one all on custom code from the start?
Captain_Throwback said:
Hey melt - another great idea.
Curious - are you going to start with this as you did with the FB tab, using HTC's code as a basis? As I'm sure you know, the OBOE Sense has a scrolling RSS Feed on the Home tab, using RSSReaderService.dll as the service that runs it. Is that where you're starting, or are you basing this one all on custom code from the start?
Click to expand...
Click to collapse
Nope, this time I'm using RSShub It leaves all the rss data sitting in ChannelData directory so it's a nice starting point, the RSSUtil.exe reads the xml file and transfers what we want to display from it to registry.
Using the facebook tab as a base I've managed to inject all the info for display via registry (eventually can do the same with the facebook tab itself and rid ourselves of the facebook.dll and display much better info). Might put a bit of strain on the registry but should only need to store the currently displayed info in the registry.
I've not used the OBOE sense feed, can't see how a small feed can give you the info you'd want. Couldn't find anything other than vague screenshots of the hometab. Any good features worth having?
Hopefully we can tie into the notification mechanism and have alerts of new feed items and a cookie widget
Hi meltwater,
this is another very good idea. One of the missing links i really need. I will supportthis too for GTX. I hope this will be also a very big success as FB. Go, go, go...
meltwater said:
Nope, this time I'm using RSShub It leaves all the rss data sitting in ChannelData directory so it's a nice starting point, the RSSUtil.exe reads the xml file and transfers what we want to display from it to registry.
Using the facebook tab as a base I've managed to inject all the info for display via registry (eventually can do the same with the facebook tab itself and rid ourselves of the facebook.dll and display much better info). Might put a bit of strain on the registry but should only need to store the currently displayed info in the registry.
I've not used the OBOE sense feed, can't see how a small feed can give you the info you'd want. Couldn't find anything other than vague screenshots of the hometab. Any good features worth having?
Hopefully we can tie into the notification mechanism and have alerts of new feed items and a cookie widget
Click to expand...
Click to collapse
To be honest, that simple little widget on my Home screen made Sense worth using again for me . Here's my very short YouTube video of it working on my Tilt 2:
It's very simple, but it gives you a quick glance of articles in the channels you selected, and if I see one that catches my eye, all I have to do is press the widget, and it opens the article in RSS Hub. I do see the practicality of an entire tab, of course, but I also like the idea of tying the press of the widget to the tab, where the feed can be viewed, rather than directly to RSS Hub, as it is, currently. Just an idea, I guess.
EDIT: YouTube embed code doesn't seem to be working . . . here's a link: http://www.youtube.com/watch?v=eWlyBgICJYg
Captain_Throwback said:
To be honest, that simple little widget on my Home screen made Sense worth using again for me . Here's my very short YouTube video of it working on my Tilt 2:
It's very simple, but it gives you a quick glance of articles in the channels you selected, and if I see one that catches my eye, all I have to do is press the widget, and it opens the article in RSS Hub. I do see the practicality of an entire tab, of course, but I also like the idea of tying the press of the widget to the tab, where the feed can be viewed, rather than directly to RSS Hub, as it is, currently. Just an idea, I guess.
EDIT: YouTube embed code doesn't seem to be working . . . here's a link: http://www.youtube.com/watch?v=eWlyBgICJYg
Click to expand...
Click to collapse
Cheers, can see what you mean (quite like the android feeds I've seen), although I tend to use RSS for podcast content too so both would work nicely.
So it is tied into RSS Hub too, wonder if there are any command line links we can find (would save programming stuff which is already in there) - update the feeds would be a handy one! Any chance of decompiling the code for the widget?
The RSSHub channel list and feed status is all in xml so it's nice and easy to access the content (decoding the content for the example took an evening and I've probably done it the hard way).
meltwater said:
Cheers, can see what you mean (quite like the android feeds I've seen), although I tend to use RSS for podcast content too so both would work nicely.
So it is tied into RSS Hub too, wonder if there are any command line links we can find (would save programming stuff which is already in there) - update the feeds would be a handy one! Any chance of decompiling the code for the widget?
The RSSHub channel list and feed status is all in xml so it's nice and easy to access the content (decoding the content for the example took an evening and I've probably done it the hard way).
Click to expand...
Click to collapse
The "update the feeds" function isn't actually done by the widget; that's through RSS Hub ("Refresh" soft key). There is a reg key to update the feeds automatically, of course. The widget depends on a specific version of RSS Hub (the one from the Oboe), and the Home tab from the Oboe obviously includes additional Manila files than other versions (the ProjectCode reg key must be "OBOE" for the widget to work at all). Is there anything I can upload for you that would help?
Captain_Throwback said:
The "update the feeds" function isn't actually done by the widget; that's through RSS Hub ("Refresh" soft key). There is a reg key to update the feeds automatically, of course. The widget depends on a specific version of RSS Hub (the one from the Oboe), and the Home tab from the Oboe obviously includes additional Manila files than other versions (the ProjectCode reg key must be "OBOE" for the widget to work at all). Is there anything I can upload for you that would help?
Click to expand...
Click to collapse
RSS Hub refresh soft key could probably be scripted using mort script to start with, although shouldn't be a big job to implement download of rss data in the RSSUtil.exe (no more than posting to/reading from facebook anyway).
Humm, sounds like it could be doing something similar to me then but from a dll to feed the data into the widget (more efficient but less control for us). It would be interesting to see the manila scripts involved with the widget, but I think that would be a job later on & cookies home tab widgets might be easier to work with.
I have to say I'm excited to see this started. I hope you continue and finish this off properly as it'll be an awesome addition to Sense's collection of tabs
could you integrate this with google reader as source?
s2007 said:
could you integrate this with google reader as source?
Click to expand...
Click to collapse
+1 that would be perfect.. Great work on this
Me, too. Also, a way to have the music tab use s2p.
Are you interested in making or editing a CHT widget? To make a widget for Co0kie Home Tab 2.0.0 is not such a difficult job as you may think, I tell you by experience. I have no previous formation in programs or informatic code but i could make a few widgets(*) and I would like to share this experience with you. This is not so altruistic work, I am expecting a huge amount of widgets made by all of you to install and enjoy in my brand-repaired HD2
Co0kie Master has allready published a guide for making a CHT widget (it is into the widgets kitchen); also Genius_Rat_2665 has made a tutorial for making a cht clock widget, so -the third time lucky- lets bring here all that knowledge and try to make a simple widget step-by-step. Also this could be a good place to share and learn each other some code for widgets. Things like how to make an blinking element, how to change number in text, how to read from the registry, etc.
(*) What is for sure is that no one widget I could ever do without the help of others. Lets start quoting the existing Co0kie's guide:
Here is a guide on how to build your own widget for CHT.
I decided to break this up into 3 parts.
The kitchen section is a brief description of the kitchen structure and batch files.
The guide section will tell you how to build your own widget and make a cab to install it.
The "how it works" section will tell you what's going on in the background - why the system is the way it is.
#####################
*** 1) Kitchen ******
#####################
Just a few words about the kitchen folder structure:
- Workspace - here you'll find all the raw files that are being worked on currently
- Tools - all the needed tools
- deploy - just a little temp dir used by the batch scripts to compile and deploy files directly to your device
- cab - the cab file and setup.dll
- cab\_files_final - all the final compiled files that will need to be inside the cab
The batch files:
These files automate the process of editing manila files.
Connect your device to your PC via ActiveSync to be able to run the batches.
z_init.bat - You need to run this one before starting. You just need to run it one time. It will copy restartmanila.exe to you device.
_Deploy_to_device_in_dev_mode.bat - this batch will:
1) compile the lua files from \workspace\_lua and copy them to the deploy folder
2) copy all files from \workspace\mode9 and other \workspace\ subfolders to the deploy folder
3) use rapicopy.exe to copy everything from the deploy folder to \windows on your device (it's set to overwrite exitsting files)
4) restart manila on your device
_Generate_files_for_cab.bat - this will compile and copy the workspace files but it will not deploy them to your device,
instead it will copy them to \cab\_final_files
it will also rename the base mode9 and lua files to CHTmode9 and CHTlua - more on this in the "how it works" section
[[ It also needs to be modified the files _Generate_files_for_cab.bat & _Deploy_to_device_in_dev_mode.bat to addapt them to your own widget. Click with the right button of the mouse over the files and select edit, then change the name of the widget (PoyTEST.lua & PoyTESTtranslation.lua in the attached example) and the corresponding manila files ]]
[[ Tools folder includes m9editor for the edition of mode9 files, notepad2 for the edition of the Lua files, CFC_GUI for the qtc files (graphics), manilaHASH to obtain the right manila names corresponding to .luac files, and some other .exe files used automatically by the kitchen. ]]
################################
*** 2) Making your widget ******
################################
Guide - how to make CHT addon widgets:
First of all, because you will be developing, you need to turn on CHT's dev mode.
Open the reg key HKCU\Software\HTC\Manila\ and create a DWORD value, call it "CHTI.AddonWidgets.DevMode" and set it to 1.
This will allow you to deploy and test your widget directly from the kitchen.
[[ This is very important as you do not need to create and install the cab for test the widget, just using DevMode the widget will go from \workspace\ directly to your device, so you can make changes and see results easily. ]]
Now proceed to build your widget. I suggest you use the analog clock addon as a base. [[ You can use PoyTEST, its much simplier ]]
There are two rules you simply must follow:
1) For every new widget, its CHTWidgetDev.lua file must change the "widgetName" property. It must something unique.
I suggest a naming system of "CreatorName_WidgetName" - that should ensure that the names are unique - there must not any conflict here!
Modify anything else however you'd like. The rest of the fields in that file don't need to be as unique as the "widgetName" property.
2) The 30182CB6_manila mode9 file must follow a special rule: The "Scene" section must not contain any components. See how it looks like in the example addon.
That's how it must look for all new widgets.
[[ Making a widget is like making a puzzle (but much more funny ), you have to put the right pieces in the right places. There is no a fix rule and there is a lot of trial and error. Where to find the right pieces? Co0kie gave us thousand of decompiled lines of Lua code in CHT_Source. Download it from post#6 of CHT 2.0.0 thread. Also look in every published widget's kitchen in CHT thread, Rat_2665, Dunc0001, ZaxXx, Azarbel, Colossus_r, RoryB, MnCessna ... (Sorry I dont remember all right now!) ]]
Once you've done that you can do ahead and run "_Deploy_to_device_in_dev_mode.bat" - that will compile the files, copy them to your device and restart manila.
Then just go to the edit widget menu in CHT - your widget should be at the bottom of the list - add it and test it.
When you have finished making your widget, you can pack it up into a cab file.
To prepare the files for the cab you have to run "_Generate_files_for_cab.bat".
The final files will be in the \cab\_files_final\ folder.
Making the cab file - this is what an addon cab must have:
1) Every last one of those files from \cab\_files_final\ need to be in the cab and they have to be set to be copied to %windows%.
Do NOT set the install dir to %windows%, set the files to be copied to %windows%.
2) The setup.dll that is in the \cab\ folder also needs to be added to the cab.
3) Last, but extremely important, set the install dir to \CHTAddons\^widgetName^ - where ^widgetName^ should be your unique widget name same as in the lua file.
[[ This is really important. If you are not creating a new widget but just editing the mode9 and/or lua files, please do not modify the installation dir in the cab properties, as it is used in the installation process and modification may cause problems in CHT ]]
If you want to test that cab on your device make sure you disable dev mode first ("CHTI.AddonWidgets.DevMode" to 0), so that the dev mode widget you were working on and the newly installed one do not conflict.
A widget must not be installed in both dev mode and as a cab at the same time!
##########################
*** 3) How it works ******
##########################
CHT addons plug into slots that interface with the core layout manager.
There is maximum number of addon slots (that number is 10 for the dev preview beta, but it will be 20 for the final).
Each widget consists of 4 parts:
1) a mode9 file for the CHT widget interface
2) a lua file for the CHT widget interface
3) any number of extra mode9 or lua files
4) xml file with a manila file list for CHTScheduler
Numbers 1-3 there are directly needed for CHT. Number 4 is needed for CHTScheduler (I'll leave the explanation of that for the CHTS thread - it's not need for now if you just want to try to build your own widget).
Numbers 1 and 2 are the most important and they are directly linked to the slots.
Here is how:
The interface mode9 and lua need to have a specific names depending on which slot they go into.
To make this happen those 2 files are dynamically named on install.
While you are developing your widget you are working with the dev widget slot. There is only one of these so it has one pair of mode9/lua names (30182CB6_manila and 7D241726_manila).
But once you make the addon cab the widget can be installed in any slot (first one found to be free). That's why in the release files, there is a CHTmode9_manila and CHTlua_manila.
Those are the same files that you were developing with (30182CB6_manila and 7D241726_manila) - they will be renamed on the fly once installed - this is where the special setup.dll comes in.
The dll will look for the first free addon slot and install the widget there, i.e. it will rename the files so they correspond to the first slot.
The install dir name that you had to specifically enter is used as the widget install ID and will be stored in HKCU\Software\HTC\Manila\ "CHTI.AddonWidgets.SlotX" (this is needed to uninstall the widget correctly).
The files that are being installed should all go to \windows so you set that directly for the files, and that allows the install dir name cab field to be used for this purpose.
Click to expand...
Click to collapse
If you have reached here I recomend you re-read Co0kie's guide, is short but it contains a lot of information, i would say every word is important!
So now the first trial:
1.- Install the kitchen: Every widget has its own kitchen, I have attached a kitchen for a very simple widget. Just download in your PC and copy all the files & folders in a separate folder (\CHTwidgets\PoyTEST\) same as they are inside the .rar
Now connect your PC and your device via USB and sinchronize. Then run the file z_init.bat - You need to run this one before starting. You just need to run it only one time. It will copy restartmanila.exe to you device.
2.- Put your device in DevMode: Go to HKCU\Software\HTC\Manila\CHTI.AddonWidgets.DevMode and change to DWORD =1 (create if does not exit). Now restart Sense.
3.- Run the file _Deploy_to_device_in_dev_mode.bat. Your device will automatically restart Sense. Then go to Edit Mode - Add new element - Select PoyTEST - done. You should see now the simple widget in your device's screen.
It will continue ....
SENSE CRASHED? NO PANIC
It is normal to crash sense when you are doing some experiments, but it normally get solved just deleting files 30182CB6_manila & 7D241726_manila in \windows folder\ and/or dissabling DevMode in registry HKCU\Software\HTC\Manila\CHTI.AddonWidgets.DevMode = 0
rat_2665 said:
It's a tricky thing. Do you use one of Co0kies widgets? For this I "took it over" at first. I didn't change the structure, only made new names in the manila files. You have to check over and over. A blank space in a name in the mode9 file cost me a day. In the next step you can try to change the behaviour.
What you see is the normal screen for an error (i had it often ). Check if all variables in the lua files are also in the mode9 file. Then in the developer mode you can't see errors in the lua scripts (absent end in functions and so on). For this I used sometimes the m9editor, compiled the scripts and looked for errors.
Click to expand...
Click to collapse
Even we can learn from this crashs:
Co0kie Monster said:
Sense nuke and lua "debugging"
The empty screen after adding your widget will happen if there is an error in your widgets lua code. Alternatively it could be a bug in the mode9 file (but those usually cause sense not to start at all), or maybe you left dev mode on and installed your widget via cab - dev mode uses a special widget slot and it will cause a conflict if a widget is installed both via cab and in dev mode at the same time, so remember to turn off dev mode.
But, anyway I'm guessing the problem would usually be in the lua code. In that case you need to debug it. I've uploaded all the needed tools to "Co0kie's Home Tab\_Development\Lua_debugging_tools". (* inlcuded in the widget kitchen)
Because lua is a script It's not really debugging, it's pretty much just a trace log.
Run attach.bat while your device is connected via active sync and that will collect trace information and display any errors along with the file and line where they occurred.
All the info is collected in debug-attached.txt.
Do whatever causes the bug, then run terminate.bat to stop pdebug (that will also restart manila).
Open up the log and look for **Lua Error******.
Other than that you will also see trace() output there.
The other batch (run.bat) is for debugging from startup. You need to turn off manila (WM Settings->Home-> turn off HTC Sense from the list) and then hit run.bat - it will start manila and log at the same time. That's only needed in case of startup errors.
Click to expand...
Click to collapse
HOW TO SOLVE SOME GRAPHICS ISSUES
santod040 about some graphic issues said:
I am not exactly sure yet why the 16 rule only applies to some roms. I think this may actually be the difference between a CFC and non CFC manila.
Though Im digging into this more still.
I also think of this more as one rom listening to the mode9, no matter what the image claims to be or is.
Where the other needs the image to specifically be what it expects, according to the mode9 and lua.
I also think it's more about "4" and "16"
Here's a few key items from Mode9 and a small bit about each.
Though it may be somewhat irrelevant mostly.
String: UTF-16LE encoded strings (represented as UTF-8 in XML and YAML)
Path: UTF-16LE encoded strings (represented as UTF-8 in XML and YAML)
UInt32: 4 byte unsigned integer
Q16: 4 byte Q16.16 fixed point number
Int32: 4 byte signed integer
Boolean: 4 byte, either 1 or 0
Vector3: 3*4 bytes of Q16 numbers (X,Y,Z)
RectQ16: 4*4 bytes Q16 numbers (X,Y,Width,Height)
RectInt: 4*4 bytes of signed integers (X,Y,Width,Height)
Size: 4*2 bytes of Q16 (Width,Height)
Color: 4*1 bytes (R,G,B,A)
Viewport: either a Vector3 or a RectQ16, depends on size
FrameValue: either a Vector3 or a Q16 number, depends on size
BinaryScript: a binary value, encoded as Base64 in the XML or YAML file
The CFC should not be used as a standard.
Heres why:
Non Cfc and Cfc images, will work on a Cfc rom.
Whereas Cfc images will not work right on a non Cfc rom(any stock rom).
So to be universal, non Cfc is the best approach.
Also consider that manila, and your device have to decompress as they use the images.
So, to offer Cfc as an option is nice, but not the universal offering.
Click to expand...
Click to collapse
santod040 said:
Similar issue again.
The qtc needed to be a more accepted dimension by manila.
I still don't have any concrete answers behind it, other then the info I already posted regarding textures and sizes in manila.
So, I adjusted the mode9 and also the qtc to be standard sizes.
I have made a few that worked.
The first was 256x64, but then was hard to move, lol.
So I edited again and made it 512x64 and reposted just now.
It seems to move just fine.
Now only to move the resize button up some and it would be near perfect.
But since it's almost 3am, that will have to wait.
Click to expand...
Click to collapse
santod040 said:
Something else to think about.
As far as the 16 rule.
I also mentioned 4.
So for example,
64 divided by 16 = 4 (good number)
96 divided by 16 = 6 (bad number)
128 divided by 16= 8 (good number)
Click to expand...
Click to collapse
only 10 widget slot problem solution
mike2nl said:
We, the CHT teams, have found a solution for the 10 slots for widget issue.
After we had changed things we are now in state to use 20 widgets(*) at all (0..19).
It is tested on HD2 and TP2 WM phones, and it's running without any issue until now.
The new file was tested by santod040, MichelDiamond, poyensa and me.
My last test was to use 20 widgets on the HD2 about the performance. And yes it does the work .
How to install the fix:
1. unzip the manila file
2. switch off sense
3. copy the 7c60907d_manila file o the \Windows directory
4. restart your phone
5. switch on sense
6. have fun to install more widgets now (max. of 20)
7. follow the install routine from every widget
Click to expand...
Click to collapse
Last but not least, thank you to all involved team members...
Click to expand...
Click to collapse
You can do your own widget just changing PoyTEST - PoyText1 - PoyGraphic1 for your own names
The best way to make a new widget is start from another widget, in this case we can start from PoyTEST, its a simple widget with 2 variables to display in the home screen of our devices: one graphic file as background and one text field. This 2 fields (or variables) will be created by the mode9 file. We have to give unique names for all the variables so the easiest way is just to change PoyTEST - PoyText1 - PoyGraphic1 - for your own names in every line of the files involved. So open file 30182CB6_manila using m9editor and do the changes. (If you are not familiar with m9editro go here)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The mode9 file 30182CB6_manila use to define also the content of the graphic variables (SetTexture) but we will do it later for this example. Other important thing is the order in mode9 stablish the order of the elements shown in ours screen. It means that we will see PoyText1 over PoyGraphic1 as we like.
Now we have to change the file CHTWidgetDev.lua using Notepad2 and change all the PoyTEST - PoyGraphic1 & PoyText1 for the name previously used in the mode9 file. It not dificult just change PoyTEST -nothing else- in every line where it appears, substitute for the name previously used in mode9 file. YES YOU HAVE TO LEAVE THE SMALL w
Some important things:
Be careful with capital and lower letters. For lua languaje 'PoyTEST' is different than 'poyTEST' so only one letter can make the widget not working.
If the line strat with '--' then the line is dissabled, this is usefull for notes & reminders and also to activate and deactivate lines. If you use Notepad2 the deactivated line will be green coloured.
The files 30182CB6_manila (mode9) & CHTWidgetDev.lua always have to be in any CHTwidget, and they must have always the same structure. In mode9 file 30182CB6_manila we do create the variables and in CHTWidgetDev.lua (renamed as CHTlua_manila in the cab) we connect the widget to the rest of Co0kie Home Tab.
Now we do not need to change anything, may be later when we are more familiar with widgets:
* Lines 3-8 is to register the widget in CHT
* Line 8 is connected to line 82-83-84. We define there how many layouts is going to have the widget (black-white-etc). We leave everything as it is now ...
* Lines 10-48 are to control the size of the widget, in the future you can play there a bit specially in line 42 if you wish your widget bigger, but now we leave it as it is.
* Lines 50-62 are very important. We do nothing there -never- just change the names for our's widget name. Specially line 62 we put there the object (clockface, bakcground, etc) that is going to react when we press it with our finger. In our case it will be PoyGraphic1 (change it for the variable name used in mode9 file 30182CB6_manila).
* Line 64 conect to our widget lua file. As you may know the lua file defines the behaviour of the widget. In this lua file we are going to say what our widget is going to do. Is time to open ManilaHash and find the manila name of our widget's lua file. Dont change the path just the final name, you can use any but by convention better use something like CreatorName_WidgetName.lua
* Lines 82-84 is to add more layouts in our widget. You can see some examples in other widgets and also in CHT_Widgets.lua (CHT source), but dont forget to modify line 8 then!
* Lines 88-104 is defined the animation effect how the widget comes to the screen when swipping between levels. I never touch anything there.
* same for lines 106-116. It was there before me and i never modify anything there (just the widget name)
* Now have a look again to every line, check the spelling, capital letters, etc.
Now you are using manilaHash you can also find the name for any other graphic file you are going to use. e. Dont change the path just the final name
Now we can start to modify the file PoyTEST.lua. Using Notepad2 you have to change PoyTEST for your widget name used in the previous lua file and also modify the name of the variables defined in the mode9 file 30182CB6_manila (PoyText1 & PoyGraphic1) in all the lines where those appears.
In this lua file can be added some properties that use to be set in mode9 file (lines 15-25) I do that for one reason: This file does not change the name in the widget installation process, as the other CHT files (CHTmode9_manila & CHTlua_manila) does. This file will be always 41CBC6DC_manila in \windows\ folder so it is easy to substitute later to correct some bugs, etc.
You can get out of the line 29 (just put -- at the begining of the line it will be green cloured) This is a test I am doing for translate widgets regarding this post. If so you have also to activate the line 28 (delete -- then the line will be black colour) and delete file PoyTESTtranslation.lua in \PoyTEST\workspace\_lua
I cannot say much more for this file. Here comes the problems. How to do things? I am not a coder I have only read and read and read a lot of code in other widgets and CHT_Widgets.lua and other files in CHT source, and try and try and try a lot, and finally ask rat_2665
* Line 33 is a way to set texture for graphic fields in lua files instead of mode9 files
* Lines 38-63 is to define what the widget does when pressed
You can do your own widget just changing PoyTEST - PoyText1 - PoyGraphic1 for your own names
Now is time to check the USB conection, device is sinchronized, then click on _Deploy_to_device_in_dev_mode.bat and see your widget working!
[[be sure the .bat file has been edited correctly by adding your widget name, as explained in post#8]]
Sense crashed ... dont worry. Nobody has got it at the first time!
1. Be sure you are in DevMode
2. Check that all the names are correctly written, specially capital letters- lower letters
3. if you got an error in the black screen after run .bat file, read it slowly. It will help
4. Once you make the corrections you can run again .bat, even with sense crashed.
MAKING THE CAB
Co0kie Monster said:
When you have finished making your widget, you can pack it up into a cab file.
To prepare the files for the cab you have to run "_Generate_files_for_cab.bat".
The final files will be in the \cab\_files_final\ folder.
Making the cab file - this is what an addon cab must have:
1) Every last one of those files from \cab\_files_final\ need to be in the cab and they have to be set to be copied to %windows%.
Do NOT set the install dir to %windows%, set the files to be copied to %windows%.
2) The setup.dll that is in the \cab\ folder also needs to be added to the cab.
3) Last, but extremely important, set the install dir to \CHTAddons\^widgetName^ - where ^widgetName^ should be your unique widget name same as in the lua file.
Click to expand...
Click to collapse
Be sure that you have edited the file _Generate_files_for_cab.bat with your own name widget as explained in post#8. By running this file all the lua files will be recompiled automatically and all the files will go from \workspace\ to \cab\_final_files\ If you have a look to the screenshot you will notice that some files names have changed: we will find there CHTlua_manila & CHTmode9_manila. This 2 files will change the name again when the cab be installed in the device, depending the free slot asigned will take the final manila in \windows\ folder in your device. Isn't magic?
Dont forget to add the magic setup.dll. When you add the files into the cab select windows as location. Then in cabinet properties - Installation directory do create a folder in \root\CHTAddons\NameOfTheWidget with the same name as your widget (line 5 of chtwidgetdev.lua) and mark hard-coded-path. Finally save the cab.
CHTScheduler
If we add a xml file named as CHTWidget_NameOfYourWidget.xml (CHTWidget_PoyTEST.xml in this case) directly in \windows\ folder with just a description of the manila files names used in our widget (see some of them as example) this widget will be used by CHTSheduler for diferents profiles, baselines, etc.
It does not seems dificult, isnt it? it simple but if you substitute the qtc file attached 1F88A376_manila, and change the color property for the text in line 17 of PoyTEST.lua to black (0,0,0,255) .... it could be the begining of an usefull widget
1.- Lets do our own CHTwidget
2.- Using JMLMenuSense
3.- Final touches
4.- A Bit of CHTS
Its good to have a look into CHTWidgetDev.lua from Co0kie's Standalone Analog Clock, with extended comments by Co0kie (in green). You have it into the Co0kie's widgets kitchen. We all started here:
-- File name: 7D241726_manila -- \windows\htc\home\scripts\home\chtwidgetdev.luac
-- ##### CHT Wigdet interface file #####
-- this script is an abstraction layer that sits between a widget and the core CHT Layout Manager
-- the template needs to be filled in the correct way, but once it is, the created widget will be plugged into the layout manager
-- and automatically behave like any other CHT widget - be movable, have access to different layout profiles, correct lockscreen behaviour etc.
-- even if I do say so myself, the system is *very* powerful
-- the comments below should provide a good description of the template
-- the primary and most important comments will be marked plainly with --
-- secondary comments will be marked with --// and they will contain some additionl points of interest, but not critical info
-- on your first read through I suggest you stick to just the primary comments
-- lines marked with --%% are commented out code that could be part of a template, but is not needed for this example in particular
-- if you have any other question, hit me in the social group
-- this first line creates a new template file based on 'WidgetTemplate' (defined originally in CHT_core.lua)
--// it's best to make it a local - it can be a global too, but there's really no need since it will not be accessed directly anywhere
--// except in this file - and one less global means less polution in the global namespace which could be very important going forward
local wStandaloneAnalogClock = WidgetTemplate:new()
-- this next step registers the newly created widget with the core CHT Layout Manager
CHTLayoutManager:RegisterWidget(wStandaloneAnalogClock)
-- some basic information needs to be filed in about the widget
-- 'widgetName' field - try to make this name as unique as possible, because it is used to save/load widget registy information
-- the core widgets have plain names (Clock, Appointments, Tasks...), but give your widget unique names to avoid conflicts
-- the simplest unique naming scheme would be to just add your name before the widget name
wStandaloneAnalogClock.widgetName = "Co0kieStandaloneAnalogClock"
-- this defines the text that will appear in the advanced settings/add a widget menu
--// sadly, I could not find a way to make the localization system distributed for every widget so you can't enter localized "IDS_*" strings here
wStandaloneAnalogClock.settingsString = "Standalone analog clock"
-- this defines the category in which the widget will appear in the advanced settings/add a widget menu
wStandaloneAnalogClock.settingsCategory = "Clock"
-- the maximum layout count (the layouts that are cycled by the previous/next button on the popup menu or in the settings menu combo box)
wStandaloneAnalogClock.layoutCount = 1
-- should the widget snap to the center of a page
-- // but "center" isn't really center - it's more like snap to posX == 0, 480, 960..., if that position X is the center of a page depends on how you made your widget
wStandaloneAnalogClock.snapToCenterX = false
-- here you can define default settings for your widget on a "per layout" basis
-- if defaults for a level are not given, it will use {visible = false, layout = 0, posX = 0, posY = 0, scale = 1, pinned = false}
-- the visible, posX and posY fields speak for themselves
-- the layout field is the layout number (can be between 0 and layoutCount-1)
--// scale is used for storing size info for resizable widgets
--// pinned is used for storing the pinned state of pinnable widgets
--%% wStandaloneAnalogClock.defaults["HomeLevel0"] =
wStandaloneAnalogClock.defaults["HomeLevel1"] = {visible = false, layout = 0, posX = 0, posY = 0, scale = 1, pinned = false}
--%% wStandaloneAnalogClock.defaults["HomeLevel2"] =
--%% wStandaloneAnalogClock.defaults["HomeLevel3"] =
--%% wStandaloneAnalogClock.defaults["HomeLandscape"] =
--%% wStandaloneAnalogClock.defaults["CHTLockscreen"] =
-- now come the widget function definitions
-- 'Initialize' - and extremely important function
-- it's called when the widget it loaded for the first time (on startup or when added from the advanced menu)
wStandaloneAnalogClock.Initialize = function(self)
-- these first few lines should be the same for all addon widgets
local newComponent = Component()
WidgetLayer2D:Attach(newComponent) -- you may modify this to be either WidgetLayer2D or WidgetLayer3D -- more info on this later
if not self.addonWidgetID then -- this is very important, every addon widget must have these line - do not modify them
newComponent:SetComponentClipCharacter("CHTWidgetDevSlot")
else
newComponent:SetComponentClipCharacter("CHTWidgetSlot" .. tostring(self.addonWidgetID))
end
self.positionLayer = newComponent
-- these two need to be filled in but they differ depending on how you named your mode9 fields
self.animationLayer = StandaloneAnalogClockAnimationLayer -- the layer that will be animated (fade in/out or any other more interesting effect that you can define - dee below)
self:AddObject(SACFace) -- defines the touch surface that, when touched, will enable the widget to be moved
-- the rest is completely up to you
require("Home\\Scripts\\Home\\Co0kieAnalogClock2") -- the script file that describes the behaviour
-- make sure that all new names that you add are unique so that there are no conflict with built-in widgets or any other addon widgets
-- suggested naming scheme is: yourname_variablename
-- the unique name requirement goes for all objectc in mode9 files, lua global variables and classes
StandaloneAnalogClock = StandaloneAnalogClockClass(StandaloneAnalogClockGroup, SACFace, SACMinuteHand, SACHourHand, SACSecondHand)
end
wStandaloneAnalogClock.GetPosX = function(self)
return self.posX + 128 * (1 - self.scale)
end
wStandaloneAnalogClock.GetPosY = function(self)
return self.posY - 128 * (1 - self.scale)
end
-- GetHeight and GetWidth provide feedback for layout manager so it can know the exact borders of a widget
wStandaloneAnalogClock.GetHeight = function(self)
return 256 * self.scale -- in this the base width of the analog clock is muliplied by the scale
end
wStandaloneAnalogClock.GetWidth = function(self)
return 256 * self.scale
end
-- resizing system definitions - I suggest you skip this part on your first read
wStandaloneAnalogClock.isResizable = true
wStandaloneAnalogClock.rotatingResizeButton = true
wStandaloneAnalogClock.GetResizeRefX = function(self)
return self.posX + 128
end
wStandaloneAnalogClock.GetResizeRefY = function(self)
return self.posY - 128
end
wStandaloneAnalogClock.GetResizeButtonXDelta = function(self)
return 90
end
wStandaloneAnalogClock.GetResizeButtonYDelta = function(self)
return -90
end
wStandaloneAnalogClock.CheckScaleLimit = function(self, scale)
return (scale >= 0.5 and scale <= 1.3), 0.5, 1.3
end
wStandaloneAnalogClock.GetResizeUnit = function(self)
return 128
end
wStandaloneAnalogClock.ApplyScale = function(self, newScale)
self.scale = newScale
local newRadius = self:GetResizeUnit() * newScale
self.animationLayer.Scale = Vector3Property(Vector3(newScale, newScale, newScale))
end
-- these are the layout control functions
-- this example widget has only one layout available, but these function come in very handy for defining multiple layouts
-- this function is run before any of the defined layout functions
-- this should contain something that should be set commonly for any layout
wStandaloneAnalogClock.CommonPreSetLayout = function(self)
StandaloneAnalogClockAnimationLayer.Center.x = SACFace.Size.width / 2
StandaloneAnalogClockAnimationLayer.Center.y = -SACFace.Size.height / 2
if not self:CheckScaleLimit(self.scale) then
self.scale = 1
end
self:ApplyScale(self.scale)
end
-- one of these functions is run depending on the selected layout
-- the string to be shown in the settings menu combo box is also defined here
wStandaloneAnalogClock.layoutName[0] = "[[IDS_NO_ALT_LAYOUTS]]" -- combo box text
wStandaloneAnalogClock.SetLayout[0] = function()
end
-- additional layouts can be defined here
-- the number of functions must match the layoutCount field defined above
--%%wStandaloneAnalogClock.layoutName[1] = "Second layout"
--%%wStandaloneAnalogClock.SetLayout[1] = function()
--%%end
--%%wStandaloneAnalogClock.layoutName[2] = "Third layout"
--%%wStandaloneAnalogClock.SetLayout[2] = function()
--%%end
--%%wStandaloneAnalogClock.layoutName[3] = "Etc"
--%%wStandaloneAnalogClock.SetLayout[3] = function()
--%%end
-- like CommonPreSetLayout this function is run for any of the layouts
-- but it's run after the layout specific function
--%%wStandaloneAnalogClock.CommonPostSetLayout = function(self)
--%%end
-- animation function, they are run when switching between level or adding/removing a widget
-- the basic thing that needs to be done here is make the widget visible or invisible,
-- but you can play around with the animations and put in some eye candy
--// Interopolate can be used with Opacity, Position, Rotation and Scale and some cool effect combinations can be made
--// post in the social group if you need more info
wStandaloneAnalogClock.AnimateIn = function(self, instant, swipeDown)
if instant then
self.animationLayer.Opacity.value = 100
else
self.animationLayer.Opacity:Interpolate(100, 10, 0, Interpolate_Linear)
end
end
wStandaloneAnalogClock.AnimateOut = function(self, instant, swipeDown)
if instant then
self.animationLayer.Opacity.value = 0
else
self.animationLayer.Opacity:Interpolate(0, 5, 0, Interpolate_Linear)
end
end
-- these two functions define what should be run to connect or disconnect widget press actions
-- the functions are called on transition to the lockscreen, edit mode, but also for some smaller details (like when menus are up)
wStandaloneAnalogClock.ConnectPressHandlers = function(self)
StandaloneAnalogClock:ConnectPressHandlers()
end
wStandaloneAnalogClock.DisconnectPressHandlers = function(self)
StandaloneAnalogClockisconnectPressHandlers()
end
-- these two do much the same as the previous functions, but the serve as exceptions for the lockscreen
-- in this case the analog clock should not have any action on the lockscreen
-- but for example, the music player uses these functions to reconnect the play controls on the lockscreen
--%%wStandaloneAnalogClock.ConnectLockscreenHandlers = function(self)
--%%end
--%%wStandaloneAnalogClock.ConnectLockscreenHandlers = function(self)
--%%end
-- this one is used to clear the the widgets selection status
-- in this example when the clock is pressed it sinks in a bit
-- in certain situations, there might be a need to deselect a widget even if it's still under the finger
-- (for example when a side scroll is started)
-- that's when this function is called
wStandaloneAnalogClock.ClearSelection = function(self)
StandaloneAnalogClock:ClearSelection()
end
Click to expand...
Click to collapse
You can try now making your own Clock-CHTWidget, following rat_2665 tutorial:
This is a little guide for clock widgets:
Read at first the widget development guide by Cokie (it's in the below mentioned kitchen) !!!
Step 1 manila hash names
1. Download the kitchen for the analog clock widget by cookie and make a temp folder in there. Copy the files for your analog clock in this folder (best if you have already a working clock for CHT 1.8.5). Save the pictures out of the qtc manila files as png in this folder (this is only useful for oversight). Rename the whole widget with your widget name.
2. Make a list with new names for your text and image objects with manilaHASH.
- the names should be unique. I use my name and a widget number as prefix, f.e. rat_w001_secondHand
- determine the manila hash name. For this use the line
\windows\htc\home\assets\images\Home\VGA\Your_Name.qtc
Save this list. You need it all the time for oversight.
3. Rename your images in the temp directory with the new manila names (this is only useful for oversight); then rename also your manila image files with these names.
4. Delete all files in the workspace\qtc directory and copy your new manila files into this (but not the old 1E1A6CCD_manila and 1EC5924B_manila)
Step 2 mode9 file.
5. Open the mode9 file in the workspace directory. Go in the library to the StandaloneAnalogclockGroup. There are the image and text objects for the clock.
6. If you have more objects in your old 1E1A6CCD_manila file for your analog clock add these objects in the group.
7. Then substitute
- for all objects the Instance value with your new name (f.e. rat_w001_secondHand),
- for the image objects the Texture path with the (here shortend) string that you used for the manila hash name (f.e. .\Assets\Images\Home\VGA\rat_w001_secondHand.qtc)
- for the text objects the String value to the variable used in the lua file (f.e. rat_w001_weekday). If you want to use AMPM like in the normal clock, don't change this value.
8. Change the name of the StandaloneAnalogClockGroup to a unique name (that is used later in the lua files, f.e. rat_w001_ClockGroup)
9. Change the name of the StandaloneAnalogClockAnimationLayer to a unique name (that is used later in the lua files, f.e. rat_w001_ClockAnimationLayer)
10. Save the file.
Now to the lua files.
Step 3 CHTWidgetDev
Substitute all uses of wAnalogClock2 with a unique name (f.e. w_rat_w001_Clock). You can do this in Notepad2 with the Edit/Replace function.
Then substitute in line 69 StandaloneAnalogClockAnimationLayer with the new unique name you used in the mode9 file for the animation layer (f.e. rat_w001_ClockAnimationLayer).
Do the same in line 74, 135, 136, 191, 195 and 212 for all uses of StandaloneAnalogClock (f.e. rat_w001_Clock)
Replace the string in line 28 with the name of your widget (f.e. "rat_w001_clock").
In the next line insert the string that is shown for the widget in the home layout (f.e. "my analog clock").
For an analog clock you don't need to change the next item (""Clock").
In line 70, 135 and 136 is the image object for touching mentioned. You have to substitute "SACFace" with your image object (at best the greatest, f.e. rat_w001_clockface)
The last part is line 73 and 74. In line 73 you have to substitute "Co0kieAnalogClock2" with the name of your special lua script (f.e. rat_w001_clock).
Line 74 is the bridge to your lua script. Here are the arguments of the ClockClass defined that are used in the StandaloneAnalogClockClass.__init function in your special lua file. Of course the name of the function is later also to be changed.
In the example it is:
rat_w001_Clock = rat_w001_ClockClass(rat_w001_ClockGroup, rat_w001_clockface, rat_w001_minuteHand, rat_w001_hourHand, rat_w001_secondHand)
Step 4 special lua file
For naming use the lua script file name you used in the CHTWidgetDev.lua file (rat_w001_clock)
In the first (commentary) line change the location with the new name instead of Co0kieAnalogClock2 and use the manilaHash app with this string:
\windows\htc\home\scripts\home\your_widget_name.luac
Then substitute also the manila name (f.e. -- File name: 1F2E1A7D_manila --\windows\htc\home\scripts\home\rat_w001_Clock.luac )
Substitute all uses of StandaloneAnalogClock with your name (rat_w001_Clock)
Change all uses of SACShowAMPM to your name (rat_w001_ShowAMPM).
That would be all if you only want to make a normal analog clock widget, but if you want to change more you have to go to the central function for the behaviour. For this you have to look in this two functions (these are the old Co0kie names):
StandaloneAnalogClockClass.UpdateTime = function(self)
StandaloneAnalogClockClass.UpdateSecondHand = function(self)
Here the update interval and the rotation of the hands is defined. In Co0kies clock it is pretty simple. If you want to add more functions here is the place. The names of the standard arguments clockGroup, clockFace, minHand, hourHand and secondHand should be unchanged in the whole file. For every other variable and object use your special unique name.
Of course you can add other functions in their own place. You find examples for this in my clock thread.
Now it is testing, testing, testing.
Step 5 bat.files
In the kitchen there are these two files
_Deploy_to_device_in_dev_mode.bat
_Generate_files_for_cab.bat
for handling in the development process.
Here you have to substitute in both files in the second luatool line 35E966AF_manila ..\Workspace\_lua\Co0kieAnalogClock2.lua
with your new widget name and its manila hash name. (in the example: 4C0089BA_manila ..\Workspace\_lua\rat_w001_Clock.lua)
Step 6 CHTS file
Rename the file in the CHTS with your new widget name (f.e. CHTWidget_rat_w001_Clock.xml).
Open the file with the windows editor.
Take your list with the manila hash names and substitute the objects with your new names and the manila names.
For the third line use your widget name and in the fourth line ("description") the string you used in the CHTWidgetDev.lua for the home layout description.
Click to expand...
Click to collapse
This links always useful ...
TUT: Editing manila!
LuaTool 1.2 - Lua Decompiler, Compiler and Compare
TF3D manila mode9 editor
CFC GUI - THE Manila/TF3D Image Editor
Manila file names
Manila CMD Kitchen Environment
Lua 5.1 Reference Manual
Manila Development for Beginners
Example of use of longpress thanks to RoryB
Modifications of the lua script/functions thanks to rat_2665
and reserved5 (i hope is enough )
Great post...I have been wanting to work on my own widget for CHT. Hope this thread will help me jump start...
So here are a few little things I have gathered over the last few months which I have found useful.
The ManilaHash.txt contains two lines of text for you to cut and paste into Manila Hash which you need to generate the correct manila filenames for your widget scripts and qtc image files. Just open Manila Hash, open the txt, copy and paste the relevant line into MH and alter the last bit to your image/script name. Then click Get Manila and you'll have your unique manila filename. Then highlight the hashed name, right click and copy. If it is the name for your widget script you are generating you then need to use this in the two bat files (Deploy to device in dev mode/Generate files for cab) before you run either bat - right click and Edit and you'll see something like this:
Code:
@echo off
pushd tools
luatool /c -o ..\deploy\7D241726_manila ..\Workspace\_lua\chtwidgetdev.lua
luatool /c -o ..\deploy\3DFA729F_manila ..\Workspace\_lua\dunchexclock.lua
copy ..\Workspace\mode9\*.* ..\deploy >nul
copy ..\Workspace\qtc\*.* ..\deploy >nul
copy ..\Workspace\png\*.* ..\deploy >nul
copy ..\Workspace\locales\*.* ..\deploy >nul
copy ..\Workspace\CHTS\*.* ..\deploy >nul
rapicopy -d -e -s ..\deploy \windows
rapistart restartmanila.exe
del /q /s ..\deploy\*.* >nul
pause
NB - The bat files included in the widget kitchen contain notation by co0kie but the code above shows the actual active parts of the bat.
The line you need to change is this one:
Code:
luatool /c -o ..\deploy\3DFA729F_manila ..\Workspace\_lua\dunchexclock.lua
Change the manila name to the one you just generated for the script (highlight/paste from MH) and change the script name to whatever name you are giving your widget script. BTW confusing as it may seem the hashed name is generated using .luac and the bat refers to it as .lua - this is correct!
Also for reference you should also edit the first line in your widget script to show the correct script name and hashed manila filename. Incidentally you'll notice this line in the script has -- at the start. This basically 'disables' the line so it becomes for reference only. This is handy during testing because you can remove elements from use without actually removing the text from the script, so they are easy to add back in later. If you are using Notepad2 which is in the tools folder (and I strongly recommend you do because it is specifically formatted for editing these scripts) you'll see that lines beginning with -- appear in green so you can easily identify inactive lines.
If you have generated a hashed name for a qtc file then simply copy the name, right click on your qtc file and Rename, highlight current filename and paste.
Widget mode9 Filenames.txt contains the hashed filenames for the mode9 files of each widget depending on which widget slot it is installed into. The mode9 and WidgetDev.lua filenames are generated during install depending on the slot number so you will need these if you are going to edit the mode9 after you have actually installed a widget (not relevant if you are still working on it in dev mode). You can also use this list to locate the mode9 file for any widgets you already have installed but which you may want to take a look at for reference or edit.
LUA Ref v5.1.pdf is a really useful quick reference guide for lua syntax, but before you get in a spin trying to get your head around lua for the first time I would strongly recommend reading this BEGINNERS GUIDE. There are many online references including the main LUA Reference Manual (there's a link to it in the site I've just linked to) but this one gives an easy to follow guide to the basics so read it first!
rat_2665's CHTAddon Dev Mode Switch - adds a new toggle switch in the CHT Toggle Switches list. Works like every other toggle to activate/deactivate Dev Mode rather than having to do it manually with a registry editor. Just toggle on/off and soft reset after each change to enter/leave Dev Mode. I'm sure rat won't mind me posting this here - it's all his work so all credit to him for this one - but it really is a timesaver when you are developing!
One final word of advice/experience - when you are first starting out on developing widgets it can be very VERY frustrating, especially if like me you have absolutely no previous experience of coding. However we are all here to help -that's what this community is all about. If you have a problem just ask. And be prepared for many many Sense crashes and resets! But hey, that's what dev mode is there for - another of co0kies little flashes of genius!
Right, that's just to give you all a hand with some basics! We are now open for business - ASK AWAY
Thanks Poy, Rat, Dunc, and all those involved with CHT and CHT widget dev.
This could prove to be very useful for anyone wanting to jump into making their own widgets and for collaborative efforts as well.
I look forward to seeing where this goes from here.
If I decide to add anything to the great info already posted, I will place it here.
Thanks for your efforts to get this going Poyensa.
Excellent thread, hope to try out the tutorial at some point.
At the moment interested in the toggle switches and how to make them, since it's not covered anywhere.
I've opened up rat_2665's toggle switch cab (hopefully that is ok - it is a good example).
The two key files are:
CHT_switch_DevMode.png
CHTlua_manila
The lua code is as follows:
Code:
Co0kieSwitchLink("DevMode Switch", "\\Windows\\CHT_switch_DevMode.png", _application.Store:GetValueChangedEvent(Lifetime_Permanent, "CHTI.AddonWidgets.DevMode"), function(l_1_0)
if _application.Store:GetIntValue(Lifetime_Permanent, "CHTI.AddonWidgets.DevMode") == 0 then
_application.Store:SetIntValue(Lifetime_Permanent, "CHTI.AddonWidgets.DevMode", 1)
else
_application.Store:SetIntValue(Lifetime_Permanent, "CHTI.AddonWidgets.DevMode", 0)
end
end
, function(l_2_0)
if _application.Store:GetIntValue(Lifetime_Permanent, "CHTI.AddonWidgets.DevMode") == 0 then
return false
else
return true
end
end
)
From the above you can identify:
The switch title - "DevMode Switch"
The graphic - "\\Windows\\CHT_switch_DevMode.png"
Trigger - _application.Store:GetValueChangedEvent(Lifetime_Permanent, "CHTI.AddonWidgets.DevMode")
Action - function(l_1_0)
Switch position - function(l_2_0)
The setup.dll in the cab, sorts out the install side (as mentioned in the other posts).
Anyone know what lua file is the wifi switch? Or what regkey it monitors? Thanks.
Sorry if this info is written somewhere else, but I've not been able to find it so far.
meltwater said:
Anyone know what lua file is the wifi switch? Or what regkey it monitors? Thanks.
Sorry if this info is written somewhere else, but I've not been able to find it so far.
Click to expand...
Click to collapse
I would like to know that as well.
ai6908 said:
I would like to know that as well.
Click to expand...
Click to collapse
The wifi switch is in the Co0kieLink.lua file
Code:
Co0kieSwitchLink("[[IDS_WIFI_TOGGLE]]", "\\Windows\\CHT_switch_wifi.png", machineStatus.WifiOn.OnValueChanged
,function()
JMLComm("wifi")
end
,function()
return machineStatus.WifiOn.Value
end)
meltwater said:
Anyone know what lua file is the wifi switch? Or what regkey it monitors? Thanks.
Sorry if this info is written somewhere else, but I've not been able to find it so far.
Click to expand...
Click to collapse
ai6908 said:
I would like to know that as well.
Click to expand...
Click to collapse
Download CHT_AddonLinksKitchen.zip in post#6 of CHT2.0 thread. Inside \workspace\_lua\ you will find decompiled 6ADCC943_manila -- \windows\htc\home\scripts\home\chtlinksdev.luac with comments from co0kie
You beat me to it! BTW, Meltwater in the house - we are honoured
Making new links is actually way easier than making new widgets because there are only very small scripts involved and no mode9. You can either make new links to add in to the existing link sets (Miscellaneous, Toggles, etc) which is really straightforward, or you can create entirely new link sets. I have done both, adding new DatePicker and All People links into the Misc group, and making the new Page Switch Link set. Making a new set is also pretty straightforward although you also have to define the class and function, but most importantly each new set of links must have a unique link ID. This ID needs to be chosen and then notified to the CHT dev group in the Widgets discussion. If you don't have access to it then ask here and we'll provide you with one and feed it back to the dev group.
I can't remember what's in the kitchen Poy just linked to so I have attached my three kitchens below, along with a zip containing the CHT_quicklinks and freelinks luas and one of MichelDiamond's scripts for some of the links he added in for CHTS.
Again, any questions you have keep asking. We're waiting to see what amazing new stuff you come up with...
Dunc001 said:
You beat me to it! BTW, Meltwater in the house - we are honoured
Making new links is actually way easier than making new widgets because there are only very small scripts involved and no mode9.
... ...
Again, any questions you have keep asking. We're waiting to see what amazing new stuff you come up with...
Click to expand...
Click to collapse
Thanks guys. I did look at this when it was released, but found it difficult to get started with it.
That was my theory, make a few switches and get used to the plugins. Thought I could make some custom ones for switching on an in-car mode and various other things (switching into development modes for debugging the tabs would be handy too).
Obviously there is potential for using the stuff I've got for an improved RSSWidget and FbWidget but I'm still working out how to create stuff from scratch (but I am getting there).
Would be interesting to make a widget which displays set text items (perhaps a graphic too) from the registry, with callbacks to an app if pressed. That would be enough for a .net program to tie into, this is the basis of the RSSTab. Such a general widget could be used for a lot of things.
By the way, if you want to use some wiki space, feel free to carve out a chunk!
http://forum.xda-developers.com/wiki/index.php?title=WM6_HTC_Sense_Developer_Wiki
Have you got the CHT RSS widget kitchen? I'll upload it if not. If you could make a widget template for an updated rss widget or Facebook/Twitter widget to look/function in a similar way to the Android sense widgets that would be fantastic. Scrollable, with channel icon/Facebook pic beside each item, and also showing update time. Core CHT tasks and contacts widgets are already scrollable so all the necessary code should be available to copy/adapt. Let us know what you need any help with.
Dunc001 said:
Have you got the CHT RSS widget kitchen? I'll upload it if not. If you could make a widget template for an updated rss widget or Facebook/Twitter widget to look/function in a similar way to the Android sense widgets that would be fantastic. Scrollable, with channel icon/Facebook pic beside each item, and also showing update time. Core CHT tasks and contacts widgets are already scrollable so all the necessary code should be available to copy/adapt. Let us know what you need any help with.
Click to expand...
Click to collapse
I think I'll get my feet wet by doing some toggle switches first.
At the moment don't have the time to do the full widgets yet, got plenty that needs doing on the tab itself, but it would be great to get it all to tie in.
Well, the basics are done. If you miss something let us know. We also will try to bring here some tricks, fixes, mods, etc. And of course the answers for all your questions, excepting the date for next CHT update!
meltwater said:
Would be interesting to make a widget which displays set text items (perhaps a graphic too) from the registry, with callbacks to an app if pressed. That would be enough for a .net program to tie into, this is the basis of the RSSTab. Such a general widget could be used for a lot of things.
Click to expand...
Click to collapse
I totally agree with you.
I am monitoring this thread since its creation and I plan to investigate it when I will have more free time next week.
My goal: modify the RSSWidget to display feed informations from Google Reader (via the "Speeed Reader" application and probably a mortscript to parse the .xml and update registry).
kalhimeo said:
I totally agree with you.
I am monitoring this thread since its creation and I plan to investigate it when I will have more free time next week.
My goal: modify the RSSWidget to display feed informations from Google Reader (via the "Speeed Reader" application and probably a mortscript to parse the .xml and update registry).
Click to expand...
Click to collapse
Well I hope to integrate Google Reader into the RSSTab at some point.