Related
When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.
have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda
got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem
Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.
So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.
The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.
Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.
even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...
I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps
Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris
I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?
I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900
Try this???? Came with my new I-Mate PDA2 extended rom.
This may only work on the Alpine and it may mess up your Himalaya or any other device...
USE AT YOUR OWN RISK AND DO NOT COME *****IN TO ME IF YOU BREAK YOUR PHONE! :twisted: :evil: :shock:
I installed this thinking that maybe it would show the NAMES on the Caller ID display.
Instead, now it doesn't show ANYTHING - Not even the number.
I have a Blue Angel device, if that helps.
Thanks,
IceCream
bt800
If you are geting caller ID only on your device, consider your self lucky. You need no fix.
On the Himalaya, you need 2.20 and Hands Free mode just to make it work a little! :twisted:
Names will never be displayed unless Jabra updates the firmware.
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
On the Blue Angle, is it a MS stack or Broadcomm?
If MS, the update fix will not work. If Broadcomm, it may.. The I-mate pda2 uses Broadcomm.
If you have MS stack, you need to pair in Hands Free mode. Headset mode will not work, it will give you a LONG delay befor it answers and NO caller ID.
On the Himalaya, the BT800 only works under the 2.20 Translated ROM.. NOT 2.02 or 2.06. On the 2005, it works fine.
However, I have not tried the "fix" from I-mate for the PDA2 on the 2.20 or 2.06 or 2.02. The 2.02 or 2.06 will never work because the Hands Free Profile does not work right. The mic does not work with 2.02 or 2.06 and it has a stero affect from the speaker and mic still working on the phone.. (only sound on the device of the BT800 or any other device)
icecreamguys said:
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
Click to expand...
Click to collapse
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
Click to expand...
Click to collapse
Yes, I did.
Thanks,
IceCream
Hi guys!
As wrote before in many other threads....caller id function in my Jabra 800 works as you described (only number but not name). Truthfully I can live without it....but the main problem is that it takes about 4 or 5 times to press answering button before I can hear my opponent. Also it takes about 2 seconds to conect.
That's really my biggest problem.
So, I wonder if this fix file can help me.
I have Qtek 9090 with Dangard rom 1.40.147 and 1.12 radio (bt 3900).
Please help, cause don't want to litter my PDA with unnecessary fix cabs.
Many thanks.
Leo.
As with all testing, use sprite back up or sunnysoft back up before you try anything. If it does not work, REWIND!!! :lol: :lol: :lol: 8)
Same situation here.
Repeat: use Qtek 9090 with Dangaard ROM 1.40.157
BT 3900, Jabra BT 800. Used this cab. Nothing broked. :lol:
But, now answering option works fine, exept - I can't here number on the BT device :lol:
Really cool :lol:
So, best way to wait for new cab fix, which will help to see number on the Jabra's screen.
:lol:
Anyway thanks.
You are MAN!
Sorry, tested little bit more and found out that Fix cab didn't help.
Now also I can't here numbers. :evil:
Anyway, today I'm going to reflash PDA with new ROM.
Hope that Jabra customer service will actually help us.
:?
Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?
i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:
Is your BT on? If not turn it on and leave it on.
good luck
Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?
Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?
i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.
matrix70 from version did you upgrade from, do you remember?
same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck
now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....
I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.
I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine
Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.
im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.
im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.
Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik
Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.
there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.
how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...
Hey everyone,
i've noticed, that this has been discussed before, but i've found only a thread in the kaiser forums and there seems to be no solution for this:
I'm using a plantronics discovery 665 headset with the Artemis on meschle's touch rom 3.01 and the sound quality (especially for the those I've called) is really bad. They always say, that they hardly hear me. In the kaiser forums they say it's possibly a hardware issue, or that it has something to do with bt 2.0. I was using a plantronics explorer 350 headset before with the original wm5 ROM and it worked just fine. I tried the new headset yesterday with a 'normal' nokia cell phone and the quality was excellent. So it's neither a problem with the headset, nor a problem with the Artemis itself (I think).
I played a bit with schap's advanced configuration tool to change the sample rate, using joint stereo or not, changing bit pool size, but nothing seems to make a difference. I don't want to downgrade to an older ROM (or the original one) because I think meschle's ROM is just great! And I don't even know, if it would help ('cause now I have only the WM6 version of the original ROM, and maybe it's a WM6 problem?!).
If someone has any experience with this issue, knows if an other ROM will do the trick, or have a solution for this problem, that would be great!
WM5, the better software?
ok guys,
as nobody seemed to have an answer or a similar problem, i've tested all ROMs i could find, and the last one, the oldest one, the original WM5 ROM worked for me/my headset. the quality now is as good as it should be! it's frustrating to use this again after using meschles ROM extensivly, but it's still a phone and every now and then i want to use it's phone-function as well!
maybe someone has an explanation for this?! is it really a WM6 issue? (the original ROM WM6 didn't work either)
WM6?
kb1313 said:
ok guys,
as nobody seemed to have an answer or a similar problem, i've tested all ROMs i could find, and the last one, the oldest one, the original WM5 ROM worked for me/my headset. the quality now is as good as it should be! it's frustrating to use this again after using meschles ROM extensivly, but it's still a phone and every now and then i want to use it's phone-function as well!
maybe someone has an explanation for this?! is it really a WM6 issue? (the original ROM WM6 didn't work either)
Click to expand...
Click to collapse
I'm also thinking it's a WM6 issues. No problems b4 I upgrade to Meschele's Touch 2.1. Btw Touch 2.1 works great!!!
Now before anyone goes bashing me for not searching the forum, lemme tell everyone, I've done just that. I just haven't found the answer to my problem.
I recently acquired an 8525 (which I'm loving BTW ). I have a Jawbone headset that pairs up fine with all of my phones (BB Pearl, 8125, & 8525). Only problem is, I can actually *use* the Jawbone with my Pearl and my Wizard, just not my Hermes.
I've paired, deleted, and re-paired again but to no avail. I've tried to get an actual conversation going using 3 different ROMs: AT&T's official WM6, Schaps 4.30 Full, and vp3G's 3.62 Full, but nothing works. I've reset the Jawbone more times than I can count, and I still can't use it.
ANY input on this would be GREATLY appreciated, since I actually *need* to use it for work...
BombaMyte said:
Now before anyone goes bashing me for not searching the forum, lemme tell everyone, I've done just that. I just haven't found the answer to my problem.
I recently acquired an 8525 (which I'm loving BTW ). I have a Jawbone headset that pairs up fine with all of my phones (BB Pearl, 8125, & 8525). Only problem is, I can actually *use* the Jawbone with my Pearl and my Wizard, just not my Hermes.
I've paired, deleted, and re-paired again but to no avail. I've tried to get an actual conversation going using 3 different ROMs: AT&T's official WM6, Schaps 4.30 Full, and vp3G's 3.62 Full, but nothing works. I've reset the Jawbone more times than I can count, and I still can't use it.
ANY input on this would be GREATLY appreciated, since I actually *need* to use it for work...
Click to expand...
Click to collapse
I am currently using my Jawbone with Schnaps 4.01 Lite rom and no problem. Before that I have been using all of Matt's Pandora Kitchen roms, right up to the latest and never had a problem. I ran Schnaps 4.30 Full rom too, but really can't remember if I used the Jawbone during the testing time. If someone else can't help I can flash that rom again and test the Jawbone with it too. Let me know ho wit goes.
works with vp3g3.62. no issues, didnt require anything special. Does bt radio on your 8525 work?
I have an 8525 running Schaps 4.30 with radio 1.48.00 and mine is working. I did however have to return one Jawbone because it would connect and I could hear the conversation but the mic didn't pick up my voice. I tried that one on my wife's razor and it had the same symptoms though. What radio are you running?
Using with TNT's latest ROM and no problems, however not real impressed with Jawbone so far. Most people I call say it sounds "tinny".
mthomas said:
works with vp3g3.62. no issues, didnt require anything special. Does bt radio on your 8525 work?
Click to expand...
Click to collapse
AFAIK, the BT radio works. Like I said, I can pair up with it just fine, and even see the other BT-enabled phones/devices at my job. I just can't get any type of audio from my JB. I'm currently using vp3G as well.
UPDATE: Well to be on the safe side, I tested my Jawbone on a couple other phones; sure enough it's working fine, so it's got to be something up with my poor Hermes... Any advice?
Mine Jawbone Works fine also. I remember when I first got it I was having trouble with my sound. I remember changing the audio bitrate from 48 bit to 44 bit in the advanced config utility 1.1 Also try changing the stereo setting to mono.
May help you out, hope so.
Just a quick update: I reflashed vp3G's 3.62 ROM, reset my JB and repaired it; same effect, nothing. Just to be on the safe side I paired the JB with my Wizard, BB Pearl, and a couple of phones at my store and it works as it should.
@ mthomas: I'm using 1.48.00 for my radio. Since you and I seem to have the same type of setup, did you install any other cabs that help your BT out?
Do you have another Bluetooth headset to test. Even thought it can pair ok, it only means the "data" channel is working. The problem could easily be the voice channel which is not working. If possible, may be borrow another headset to try.
That's my next idea. I think I have an old Plantronics I can charge up and test out...
*BUMP!*
Gotta keep this fresh. Funny thing I noticed though: when I have the Jawbone connected and the phone rings, I still hear it's little tone in my ear, but no audio comes or goes through. No registry edits have been made; I've even done a hard reset, re-paired and tried again, to no avail.
C'mon you guys! Why am I the only 8525/Jawbone user around here that *can't* use his Jawbone??? Help me out here...
wish i had the answer. im using the most current att radio 1.54.07.00. how did your device work w/ another headset?no additional tweaks
Okay, now I'm getting pissed.
I tried using my old Plantronics 320. It pairs fine with the Hermes, but making phone calls is a no-go.
The only thing I removed (from anyone using vp3G's 3.62 Full) was Sleuth's PTT Fix; I need PTT more than being able to re-map the button. So I doubt this is the culprit.
WTH can't I use my good Jawbone with this thing?!?!
Quick *bump*
Same Problem
I have tried everything, I can hear the calls just fine but no sound from my mic. I have paired with other phones & it works fine. Please let me know if you find a fix!!
UPDATE: I tried using a Moto H700 and a Plantronics 340-no dice. Now I'm starting to think if it's a BT stack issue...
Now I'm completely stumped. I just flashed back to the original ATT WM5 rom, paired up, SR, then made a phone call to my 8525 from my house line. Jawbone rang in my ear, sure. I answer the call, no sound.
Could there be a problem with my BT radio? And if there is, how can I be sure/troubleshoot it?
Just throwing someting into the pot. have you tried unpairing it with your other phones? I know i was trying to pair my to my wifes and it would work because it was paired to my phone. Try deleting the relationship between the other phones. Other than that if its new enough just take it back and get another
myv6mustang said:
Just throwing someting into the pot. have you tried unpairing it with your other phones? I know i was trying to pair my to my wifes and it would work because it was paired to my phone. Try deleting the relationship between the other phones. Other than that if its new enough just take it back and get another
Click to expand...
Click to collapse
Good thought... But I already did that, still no joy. In fact, I just flashed over to HTC's official TyTN rom, and still nothing. I'm going to call a friend of mine and see if I can get it to work on their 8525. Here's a good ? tho: Should it matter if it's Cingular or AT&T branded? Are there any differences in hardware between the two types? Or could it be a faulty BT radio? I'm racking my brain trying to figure this out.
Worse comes to worse, I'm sure I could exchange my Jawbone; I *do* work for AT&T so it should be okay...
Okay, here's another question: If I were to flash *ALL* the way down to the original Cingular shipped ROM, RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship, would this have any effect on the BT stack? I'm only asking because I can't seem to find any type of information about replacing the built-in stack (outside of the Widcomm project and that's too beta for me ATM), and I still can't understand why so many headsets that I've tried with this damned 8525 don't seem to work, but so many people here @ XDA can use theirs. There's no differences between the Cingular branded and AT&T branded models (at least hardware/software-wise), and if I pair up my trusty Jawbone with another 8525 (AT&T branded, btw), it works fine.
I know I've been going back and forth with this, but I did pay a good amount for my 8525 and I don't want it to be partially or mostly functional. Hell, if my poor Wizard can handle my Jawbone, why can't my Hermes?
BTW, thanks for all of the suggestions you guys have given me to help me with this problem. Even though none of them have worked, I still need to give props where they're due.