Related
please help me!!!
i have a v1640 vodafone machine.
i have downloaded the 1.09 radio version of universal sited at xda-developers ftp.
i have tried to install. at the process, a error (the country id is not correct) was showed.
next, the pda not works. i have tried to make a hardreset, but the terminal don't start's...
please, help me!!!
the main problem is :
the startup not work's and the activesync soft not detect's the pda.
help me , please !!
Just check the Wikipedia and follow exactly the instructions.
Then it should work
Cheers
hrb
Link:
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
hi,
affortunatly i have readed other post.
i have started in bootloader mode and i have updated the rom to a qtek rom (1.13.74 esn).
later, i have updated the radio without problems.
now, i have the 1.13.74 esn rom , the 1.13.175 esn extrom and 1.09.00 radio software.
regards and thank's
hi,
in my opinion, the problem was the next: the first attempt i have installed the new radio version with the pda in normal mode...
the next attempt i don't have problems and the pda was started in bootloader mode.
regards
RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_Ship.exe
RUU_Hermes_TMO_NL_3.60.114.4_6275_1.50.00.00_108_Ship.exe
RUU_Hermes_TMO_DE_3.60.111.4_6275_1.50.00.00_108_Ship.exe
RUU_Hermes_TMO_AT_3.60.112.4_6275_1.50.00.00_108_Ship.exe
hey bro thanks for sharing but i tried uk and nl and both archives are corrupt???
please reupload the ruu or try a different link thanks in advance!
I tried DE, AT, UK - they work fine here!
Tried AT Version - download does not work!
Hmmmm, for me it worked perfect.
Do we have a straight link ?? I mena to t-mobile site ??
Sorry, i am to stupid
I have always thought, i am a ppc-pro.
But now, i am at the end of my wisdom.
My Device is the MDA Vario II from T-Mobile (get it 1 week ago).
First i have done was to visit the xda-devs, read all about upgrading a hermes, flashed HardSPL, flashed Schaps 3.54b -> all went fine.
Now i would like to try this Official Rom and this is where i stuck.
Can i simply Flash this one and is my Device after that still with HerdSPL or do this overwrite my IPL / SPL.
If this is so, can i reflash HardSPL and change to any other Rom (Schaps new one, when released or else).
Sorry for so many questions, i really read all the Wiki - Sites but i can not figured out how this work.
Because my English is not so good and it is hard to read so many technical Threads.
Thank you for any answers.
give it a day and someone will cut the bloat out and release it with a custom ruu if your unsure
i have extract this by myself and repacked it without the ipl.nb and spl.nb.
but i am not sure if i can flash this with the ruuwrapper.exe found on this forum.
This is possibly the most impressive released ever!
T-Mobile UK have been saying that there would be no update for the past 12months and its got an official release!
Gonna flash and reply in a few!
I have updated my ROM thread accordingly to celebrate the release!!!
does it come with a radio version?
Rom:
3.60.110.4
Radio:
1.50.00.00
Protocol:
32.83.7020.20h
Nothing yet on the official download site
... and it appears to be identical to the test version pushed out a few months back. Presumably the "For Test only" splashscreen has been removed.
Indeed it has been and its fast, I went into Hard-SPL and it flashed up!
Does anyone know what SPL this should be?
Herm300
IPL-1.04
HERM300
SPL-2.03
OS 5.2.1620 (Build 18125.0.4.2)
ROM Date 09/05/07
Storage (total) 47.73 (Free) 39.34
Program (total) 48.77 (Free) 28.54
Anychance of getting it extracted? I managed to flash using Hard-SPL and it all works very very well, uber fast
Never been so happy with my Windows Mobile 6.
Has installed okay on mine with no messing around with RUU's or anything.
No test version on the splash, although its a little jarring to go back to the god awful pink and white on first reboot. Now where did I put my Black themes......?
I really miss the original Spawn splash screen. Did anyone ever actually release an installer for it?
Hi everyone,
I've just upgraded my (french) Diamond's HardSPL with the OliNex version found in the topic "Hard-SPL or how I learned to stop worrying and love the MPU". Everything was OK at this time so I booted and HTC "reinstalled" the TF3D interface files.
Everything is still working but when I tried (several times) to upgrade the Radio version to v1.00.25.05, the program stays at 0% for 3 minutes and then gave me the 262 update error. I tried to connect my Diamond to different USB ports but didn't change anything.
So I decided to download the official update from HTC website and install it (witch I did) but this update doesn't work too (same error)
The strory is not so bad because my Diamond is still working but I want to install an unofficial ROM...
PS: sorry for my english and thanks for your help
@tompim
The first post in the radio thread is worth reading carefully:-
http://forum.xda-developers.com/showthread.php?t=407956
I suspect that your problem is that you need one of the unsigned / developer hardspls for standalone radio upgrades and you are using one of the "signed hardspls"
http://forum.xda-developers.com/showthread.php?t=408621
http://forum.xda-developers.com/showthread.php?t=400950
Thank you very much for your explanation (i read the radio thread before strarting ).
In fact I want to install the Diamond Project Rom that need theses (http://forum.xda-developers.com/showthread.php?t=408621) HardSPL version but I don't know what version number choose (I tried with the 1.34 and the same problem appeared
To remove all doubt and be able flash virtually any rom, flash the developer edition unsigned Hard-SPL from http://forum.xda-developers.com/showthread.php?t=400950. It should do the trick for you.
Works like a chrarm thanks!
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
kenshiromasters said:
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
Click to expand...
Click to collapse
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
duttythroy said:
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
Click to expand...
Click to collapse
Mine is also MicroP-Diam (LED) v11 and flashing is no problem for me. Try using Hard-SPL like Dutty suggests ...
I have exactly the same problem.
Even while updating the screen is black.
kenshiromasters, did you fix the problem?
Thanks,
Is there a solution for this problem yet?
Mine started doing the same thing today.
MicropERROR
Microp Version Mismatch 0
Please update Latest Microp Firmware
EDIT: Installed hard SPL and it didnt fix it
The same problem
Me too!
Some time, the screen in black, only can hear the music-volumen up/down.
I try battery off/on severy times to get a typical error:
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
Hi there,
unfortunately I'm facing the same problem.
the screen effectively is black, but I can see homepage etc as it's in standby.
MAYBE, but it's only in my mind, we could fix the problem installing windows mobile 6.1 professional.
But the problem is: who has wm 6.1 professional?anyone can post the link for download?
his this been fixed? i am having the same problem!
trying to reload duttys v3.4 right now...
and yes, im using hard spl dev ed
update:
just reflashed to dutty's 3.4, still the same problem.
seems like the phone is working because it will make the power on noise when i turn it on, but the screen isn't showing anythign again.
great...nice brick i have on my hands here :|
Got the same problem after flashing Dutty´s 3.4 - after first restart display was only "very dark" that I even could read it - "microp version mismatch 0 - update microp firmware", after second reboot the display is off permanently I flashed originila stock ROM and then signed SPL but the problem is still same... Really don´t know what to do now. How to upgrade "micorp firmware"???
edited: How did You all guys have fix that?? Is there any way instead of send it for warranty repair?? Here in Czech I´m worryin about the time of repair - and guess it will take probably one month n I can´t miss my phone for so long time:-((((
So please does anbybody know if it is SW or HW problem?? If it could be solved without repair by authorized service???
Problem hasn't got anything to do with coocked roms, hardspl or whatever....I had the problem too and had original 1.37 and 1.93 stock rom on my Diamond (Dutch). Had it send to HTC's repair lab in Belgium (www.eurotwice.be) but they couldn't repair it. Got a new one because of extenden/extra warrenty I bought when I bought my phone and cellurar subscripton with my telco.....
sounds like the hermes whitescreen problems that have been solved..
my 0,02
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
keerttttt said:
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
Click to expand...
Click to collapse
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
tommm said:
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
Click to expand...
Click to collapse
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
keerttttt said:
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
Click to expand...
Click to collapse
Yep my Diamond is dead
Not "fully dead" - is detected by PC so I flashed back stock SPL and ROM - both 1.93
It seems that PDA is working, but nor display neither buttons light
Ok today I sent it to warranty service n will see...I only hope that when i was flashing back stock ROM n stock SPL without display it was succesfull
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Leeroy_ said:
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Click to expand...
Click to collapse
send it back under warranty then
Hi every one
I would like to thank every one in this forum for all the great help & support.
I have learned a lot from here on how to tweak my 1st windows mobile
My HTC is O2-UK branded :
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
Using O2 official ROM upgrade
[Xda Ignit2_UK_2.10.206.1_Radio_Signed_Diamond_52.62.25.34_1.13.25.24_Ship.exe]
What I want to do is just put a clean ROM (may be HTC original) without all the additional software that comes with the branded ROM
The reason for this is my windows folder is filled with unnecessary stuff that I can’t delete (like opera9 & some ringtones) which is taking some precious space (file properties show it's ROM files).
My question is:
1- Which HardSPL should I use?
I’ve read this great tutorial & I’ve gathered that I need Unsigned-Hard-SPL-Diamond-OliNex & this (correct me if I am wrong)
Thanks to cozzykim for his MiniTUT but does it matter if I have SPL 2.07 & install an older version (like Unsigned-Hard-SPL-Diamond-OliNex 1.40 or 1.93) or should I wait for an upload of SPL 2.07 ??
2- Does it matter if the SPL I install is signed or not when it comes to installing cooked ROMs in this forum vs official HTC ROMs ?
3- If I want to revert back to the stock ROM for warranty reasons, can I still do that? & how ? (revert back to same SPL & ROM) ?
I've got the extracted files from the official rom which include [01_SPL.nb] which is SPL-2.07.0000, (if anyone is interested I can upload it).
So can I reinstall this in future? or just run the full official ROM.exe installer to put everything back as it was (including original SPL)?
Before any one starts flaming about searching before opening a new thread, I did search (spent two weeks reading through different posts) & I did not find any mention (or upload) of Hard SPL 2.07 (only found 1.93).
I found previous threads with similar questions not answered so thought may be it's better to open a new thread than digging & bringing up a one year old thread.
Pardon me for my noobish questions but this is my 1st flash & I am sure it will be easier afterwards but I hope answering these questions will make it easier for noobs like me & to those with XDA ignito.
Any help is appreciated & if any moderator thinks this is a repeat post & should be closed then feel free to do so.
I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !
thangkls said:
I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !
Click to expand...
Click to collapse
Many thanks for the reply
One question though, does it matter if you have a newer SPL than 1.40?
I mean did you have the same SPL (1.40) before installing OliNex 1.40 or it doesn't really matter what version is in your phone?
(mine is 2.07 & I am not sure if it's ok to install an older version like 1.40 or 1.93)
Thanks
Ok I've done it
Same steps as thangkls
1. Hard SPL - used OliNex 1.40 [Unsigned-Hard-SPL-Diamond-OliNex].
2. Reset to bootloader to check Hard SPL .
3. Flashed with A.Z.T.O.R. Re-Evolution
& I must say, it looks great so far (especially the landscape feature).
I'll worry about the warranty later (though I think restoring a newer SPL 2.07 should work the same way, as explained here)
Thanks again for the help
Now am off to test all those ROMs .... wohoooooooo
Look at my signature:
Look at my signature
Actually this was the 2nd ROM on my list to test.
I liked A.Z.T.O.R. Re-Evolution but had to abandon due to a keyboard bug.
Gen.Y D2 R5.3 looks great with 15MB more storage space & same memory use.
No bugs so far.
Spl-2.07.0000
gsm 44
where can i get SPL-2.07.0000
previously i hav phone wid this specs
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
then i updated spl with hspl olinex
nd my spl changed
now i want to revert back to spl 2.07.0000
but how
i have gone back to spl 1.93 but not beyond that
ok i did it i got the spl 2.07.0000 back