Develop Bugs

Stereo BlueTooth Headset Quality/BitRate

I've just bought the fab iTech BlueBAND set of bluetooth headphones, and have got them working with my JAM with the new BT stack plugin.
The quality is a bit dodgy though...
I know the popup message says it's streaming at 192Kb/s, but while most of my songs are encoded at 160Kb/s (which sounds relatively great on wired headphones), the higher frequencies in particular have a lot of static-like distortion through the headset. It's not unlistenable, but not really that good either. It is digital after all! So I'd expect it to either play perfectly or cut out completely.
Does anyone know if there are any reg settings to fix this? Or does anyone else use the same or other headsets and experience distortion?
Please let me know,
Cheers,
Joe

Your issue is not limited to the phone, it appears to be an input clipping issue with the BT A2DP input. It's touchy.
Right now, I'm listening to 192kbps mp3s out of my computer with a Macsense BT-100 (Class 2, v1.2, USB2.0) running the BlueSoleil 1.6 BT stack, and a pair of the new Moto HT820s, and I get that "crunchy" high end like you're describing (or at least what I think you're describing). The only way I've found to correct this, is to lower the actual input to the BT. Not sure how you can go about that with your setup offhand, but with Windows it's just tweaking the Wave volume down a little bit.
Hope this info has been of some usage to you or anyone else having this issue. Oh and I was having the issue with the HT820s and a co-worker's Bluetake BT009x (Another Class 2, v1.2, USB2.0). Again, resolution was turning down the Wave on them, and I was all set to go.
Just a fun off-topic sidenote: The HT820s with a BT adapter running the BlueSoleil stack, allows control of winamp's next track, previous track, pause, and play functions using the right earpeice's multifunction and skip buttons.
EDIT: Wave @ 50% and the crunchy sound is gone except where expected with clipping from far far too much audio being mashed together.

Thanks for your idea, looks like we need to just find a way to lower the output volume from the streaming software to the headset.
Does anyone know if this is possible through a regedit or anything?
I'm also looking for a program that will toggle the 'stream audio to bluetooth headset' in the stack extension. Then I could create a shortcut to it for wisbar desktop like with the CicleBT program.
I'm aware that viJay has made software that does this for WM5 but not for the magician's cambridge A2DP extension.
Hope that made sense!

Send me over a copy of the software/stack and I'll try to look into it, if you've got it at hand.
V

Good news...
I switched BT adapters, I got my ISSC adapter in the mail today and have been putzing around with it at work and at home, and found this out. It works great, has great distance (I got 30m out of it with a wall between myself and it, and it's only marked for 10, while the CSR adapter that I had before was marked at 20, and couldn't even go that far without breaking up to almost nothing in line of sight.), and isn't crunchy with the high-end on the audio! Maybe you can check your XDA and see what chipset it uses, and possibly opt for an ISSC based one instead of CSR-based? Better yet, i'm going to start a new thread asking people to post up the chipsets in their XDAs and other BT devices so I can compile a list of chipsets and how well they work with certain data-intensive protocols such as A2DP and File Transfer.
More info: CSR stands for Cambride Silicon Radio, and ISSC stands for Integrated System Solution Corp.

That's interesting!
I've managed to get about 15m distance with line of sight between my Jam and iTech headset, but only about 8m with walls and floor between them.
I suppose this tells us that it's either the chipset itself or the coding of the stack that is affecting the quality/volume and causing the clipping.
As I use Wisbar Desktop I didn't like permanently having the notification icon displayed so i renamed the btAVPgui (cant remember exact name of the exe) in the windows directory to get rid of that popup interface. Now I just turn the streaming on and off in bluetooth settings. Hopefully vijay will find a way to create a shortcut for that!

I'll be looking at it ASAP - still updating old stuff though, but I'm working on some very funky new stuff too, and Mrs Vijay555 is limiting me to 30 mins a night (programming, not other stuff!)
V

Cool, thanks.
I have some programming knowledge so if there's any pointers you could give me to figure it out myself, please pm me!
Those cold walks to college every morning are much more fun if I don't have to take my gloves off to get my music playing!

joehood:
What does the screen look like? You said there's a bubble in the bar at the top?
Frankly, the easiest way to tap it would be to use a Mort script. I have one set up to control the volume - just emulate a click on the top bar, eg (180,5) will approximately hit the volume icon (from memory only!). Set this up with a shortcut, and to quote futurama, "Pow".
Forgive the old screenshot, I'm at work:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Icon in claunch near bottom left will click the volume icon and permit use of the dpad to control the volume. No screen taps required.
Could you do the same for your bluetooth?
Either way, a programatic solution would be nicest, but hard work, no doubt. But I'll try to investigate.
V

OK I have the exe that creates that popup notification with the button to enable or disable A2DP streaming depending on its current status. Is there any way I can find out how it's changing the status? I've looked for a registry setting but couldn't find anything. Where else would the setting be stored?

I am amazing I am amazing...............etc
Woohoo!
I've done it!
It was a regkey after all. Found it by looking through the .unload file that CSR create in the windows dir.
HKLM\Drivers\BuiltIn\WaveDev
Then 'streamOn' is obviously activating streaming
'automute' self-explanitory
and I'm guessing showConnStatus controls the status notification.
Now... is there an easy way to create a programe which toggles the registry value? Please let me know how to programme changing DWORD values.

joehood: these things aren't usualy just a registry entry, but certainly could be.
I think mortscript can change registry entries. Try that first, and if it does or doesn't work, we can consider writing an app to do the switching if necessary.
V

I just got home and wasn't thinking when i wrote the first post, now to edit it and make myself look a lot smarter.
On windows, there is default support for .REG files that integrate into the registry and make changes on the fly based on the contents of the file.
Example:
Filename: ShowConn.reg
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
streamOn=DWORD:00000001
automute=DWORD:00000001
showConnStatus=DWORD:00000001
When this is run, it should set streamOn to on, automute on, and show connection status to on. Make another like this with the name HideConn.reg and change showConnStatus=DWORD:00000001 to DWORD:00000000 and that should turn it off. Just run whichever one, keep them in a folder and keep a shortcut, have fun switchin.

Of course! haha
I did write a little mortscript file for it last night anyway, this one toggles it on or off, but doesn't change the show connection status or automute values. Personally I hide the notifications icon in wisbar because it was permanently there before. I'm using btp_audio_ui again to confirm that files are streaming, but currently have no way of telling the status of A2DP without trying to make a sound.
I didn't bother putting the automute function in because I leave it on permanently, no need to have both sound sources really.
I'm getting VS2005 so I can have a play, will try to design a bluetooth manager program which has large fancy buttons for turning on/off the most useful functions.
The more we can get these things performing like real phones the better!
Next step: to find out how to play WMV audio through A2DP!

joehood: are the registry changes dynamic? Ie, when you incorporate your defined registry settings, the streaming/mute etc happens immediately?
V

yep!

Cool. I guess I can build them into VJVolubilis as well if you want.
If you've got a bunch of them together, PM them over.
V

Can anyone send me a bt stack with stereo support, recived my plantronics 590a today. Thanks

Oy...
Get BlueSoleil, make a new thread or search the forums next time though. I'm almost ready with my thread I hope to get Stickied with info on the software and chipsets for bluetooth.

So what you are sayin is that BlueSoleil works with WM5 to get stereo or what?

O2 applications

Well in my search for them on this forums I stumbled accross many versions and different threads, and people couldn't find them at all.
That's why I thought to put these wonderfull apps in one topic.
So far got 3 of them, 2 from some chinese site and 1 from here.
O2 plus has like 3 cracked versions, sms plus just 1, and after 2 days of searching I found a cracked version of phone plus!
To bad I can't find the answering machine yet, media plus nor message plus and menu plus.
Anyone got some more? Might take a look at them and try to make all device versions from it.
Versions (all latest to my knowledge):
O2 Plus 2.3
O2 SMS Plus 1.1
O2 Phone Plus 1.0
Here's the description of the 3:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
O2 Phone Plus
O2 Phone Plus is a dialler application that simplifies local and overseas calling. This easy-to-use program enables simpler and faster dialling from your O2 device by reducing the number of steps and keystrokes needed to make a phone call.
•
A special dialler lets you edit phone numbers when you are on the go.
•
You do not need to store the same contact number in different formats and different IDD prefixes.
•
Enhanced dialling intuitively filters your contacts to speed up the dialling process.
•
You can store IDD prefixes, calling card dial sequences into profiles, and insert the IDD prefixes or dial sequences before making a call. You no longer have to carry the calling cards with you.
•
You can block unwanted calls.
O2 SMS Plus
O2 SMS Plus is an alternate SMS application to the Inbox application that allows you to send and receive your SMS messages via a chat style user interface. The feature allows you to view both incoming and outgoing SMS messages or to show only unread message in the same list window. Plus, set up a delivery time for created messages, send and receive vCard contacts via SMS from other compatible devices, and even search through messages for keywords.
O2 Plus
O2 Plus is an application manager that gives you control over the running applications and it comes with 7 Today items that provide the user a wealth of information on the Today screen about operator name, battery, memory, names of running applications, alarms, sound profile, call divert status, tasks and appointments statuses.
O2 Plus provides an addition of 7 custom items for inclusion into Today screen.
•
Divert Profile - Shows current divert status and allows change of call divert destinations.
•
Last call - Shows caller name or phone number of last phone call.
•
Sound Profile - Shows current sound profile and allows change of sound profile when tapped.
•
Meters - Shows amount of battery power remaining and amount of memory space left in main storage, storage and storage card.
•
O2 Calendar - Shows all appointments within the next 10 days. You can control the no. of display lines in option settings.
•
Shortcuts - Shows shortcuts to various applications.
•
Running programs - Shows all running applications.

any luck with finding that answering machine?????????

media player
what about the o2 media player? that thing looks pretty awesome

No luck getting my hands on that one yet, and no pm's...
Will try to get some roms and see if I can extract them...

Iruja, many thanks for the software and more power to you.

thanks
nice software

Thanks Bro

It appears that this Gigabyte handset has an answerphone app. Could we not get our hands on this....?
http://www.pocketpcthoughts.com/forums/viewtopic.php?p=391825

How do i install these files?

shanedean said:
It appears that this Gigabyte handset has an answerphone app. Could we not get our hands on this....?
http://www.pocketpcthoughts.com/forums/viewtopic.php?p=391825
Click to expand...
Click to collapse
this wont work on htc phones... the phone driver (?) is different so when this bugger starts it records the voice coming from the microphone

Can anyone find an update which works well with WM-6 Version.
Is the old version working well on WM-6

hsanghavi said:
Can anyone find an update which works well with WM-6 Version.
Is the old version working well on WM-6
Click to expand...
Click to collapse
Which App? I'm using O2 plus and it works great...can't live without it!

O2 Plus, O2 Phone Plus which works on an Imate Phone with WM-6 Version. Can anyone get a newer version. I belive O2 has a new version on their website.

o2 plus and i-mate jasjam
I am using o2 plus (from when I had my atom) and have now installed it onto my i-mate jasjam. Most of the features appear to work except for scheduling.
Has anyone else experienced this issue?
Does anyone know how to fix schedules not executing?
Thanks heaps, and top shelf site guys!

O2 Plus 2.3 VS S710
Hi,
I installed O2 Plus 2.3 on my S710 WM6. How does it works? I see the icon on top, I opened All Programs trying to start it but I do only ear a click when I press the Icon. Any ideas???
Regards

i am using O2 SMS Plus on my TytNII and it works without any problems

it dont work on my XDA II mini

Do you have a o2 homezone logo for o2 germany, to be install on the trinity/dopod D810/ HTC p3600i. thanks

SRaybone said:
How do i install these files?
Click to expand...
Click to collapse
Yes, how do i install these files?

XDAIIs
Hey iruja,
I have been looking for this software since the 02 site closed for Australia.
How do I install the o2 plus 2.3 onto my pda from your cab files?
Thanks,
Kyle.

[REQUEST] App for Audio via Mono Bluetooth headset

I'd love to be able to send audio (FM Radio, Sound player, podcasts, etc) to my mono bluetooth headset.
I have a Scala Rider headset in my motorcycle helmet, and I'd love to hear music from my Galaxy while riding.
I found "Super BT Mono" in the Android Market, however the free version doesn't seem to work. It doesn't do anything other than show an icon in the notification bar...
So, is this even possible?

possible yes
quality will suck
back in the old days, when they did not sell single sided A2DP BT headsets, many programmers created apps to send audio via BT to non A2DP capable headsets.
but not sure if any developer is going to take on the challenge, as it's so easy to buy a single ear A2DP BT headset now in days

AllGamer said:
possible yes
quality will suck....
but not sure if any developer is going to take on the challenge, as it's so easy to buy a single ear A2DP BT headset now in days
Click to expand...
Click to collapse
I understand about the quality, and am willing to live with it.
With regards to the headset statement, trust me, the motorcycle community will love the developer of this app.
The SCALA RIDER Bluetooth headset attaches to the motorcycle helmet. So we can't just get any A2DP single ear headset. We're stuck with this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

anyone? please?

I'm putting together a simple program that will do this. FYI, it will be Froyo only.
Might be a couple weeks before I can get around to it though. I'm swamped with work at the moment, and I'll be away from home for the last two weeks of September.
It will probably be free on XDA. Might ask 99 cents for it on the market.

That is truly awesome!
I really appreciate it, as I'm sure others will!

I'll put it on my task list but cannot make any guarantee on when I can get started on this.
I'm currently working on a fix to get stereo FM radio, but while working on this I found lots of interesting stuff on all kinds of things audio related.

This is what Im looking for and cant find. The music plays in the ear piece during phone calls fine so seems like it would be easy to fix.

I've been looking for that as well. I used BToggle for 3 years on my WM5 HTC wizard. and was REALLY disappointed when I got the G1 and found... what?? NO BToggle!! so I bought a stereo A2DP headset. but with 5-6 hrs play/talk time = workable but less then happy. then I found, tested and bought Super BT mono shortly after it hit the market and use it alot!! only thing is now I miss the notifications "Pushed" to my non A2DP headsets. and this is what I want.
I think it can be done by changing parts of bluez but I dont know what yet. if anyone can point me in the right direction I'm willing to stumble my way through.
Peter.
running a G1 with CyaogenMod-6.0.0-DS
(I have 2 jabra BT250's, 2 jabra BT2050 headsets and 1 stereo BT A2DP headset)

Sorry, forgot about this little project. Put together a first release today. Find it in the market: BTmono by me. It's free. Detailed post later.

nice app
i tested it on froyo and have the following problems:
*) when using skype, it always changes back to normal phone speaker, i have to start your app again and press yes a few times, to route back to BT-headset again
seems that some actions switch it back to phone speaker
*) microphone of bluetooth headset is not routed yet, i hope this is also possible
but thanks fo the app, i hope it will work fully soon.

bedoig said:
Sorry, forgot about this little project. Put together a first release today. Find it in the market: BTmono by me. It's free. Detailed post later.
Click to expand...
Click to collapse
Awesome, Thanks! I'm going to take a look at it over the weekend.
My first proposal to it would be to have a small widget allowing to turn BTmono On/Off with a single press of the widget.

karl999999 said:
i tested it on froyo and have the following problems:
*) when using skype, it always changes back to normal phone speaker, i have to start your app again and press yes a few times, to route back to BT-headset again
seems that some actions switch it back to phone speaker
*) microphone of bluetooth headset is not routed yet, i hope this is also possible
but thanks fo the app, i hope it will work fully soon.
Click to expand...
Click to collapse
Hmm...sounds like Skype is trying to manually set the audio routing itself. Not sure if there's much I can do about that.
As for the microphone, I hadn't really considered that. I was thinking of this as purely a means of getting audio from the phone to the BT headset. Does Skype not work with a BT headset using the standard headset profile?
pure_energy1 said:
Awesome, Thanks! I'm going to take a look at it over the weekend.
My first proposal to it would be to have a small widget allowing to turn BTmono On/Off with a single press of the widget.
Click to expand...
Click to collapse
Ya, a widget is definitely on the to-do list. I need to add that to the market description. I wanted to get the basic functionality out there for now, and then add on over time. I probably wouldn't even have made it if the existing apps on the market weren't ridiculously overpriced, hehe.

Started a thread here:
http://forum.xda-developers.com/showthread.php?p=11287418#post11287418

[APP] Google Car Home 2.2.1.4

I've got the Car Home app working for Galaxy S2. As you can see, it is not available into Market for our phone.
Download the Car Home app and make sure you install first com.android.cardock-8-2.2.apk file.
For those of you with rooted phones, flash the Google signed package from CWM recovery. This is the package I currently have installed on my phone.
The app features the Voice Search integration, allowing you to perform various tasks like calling a contact directly with a command similar to "call Alex mobile" or "listen to Michael Jackson". It also has a cool automatic mode (Day/Night) and links with your bluetooth car system.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tip: If you are rooted, uninstall VoiceToGo and VLingo apps, they are useless once you use Voice Search app.

Can anyone confirm if the Car Home starts automatically once you place the phone into Samsung Vehicle Dock kit? It should from what Google says... I'm going to get the dock, is damn sweet.

Confirmed. Use it every day!
Sent from my GT-I9100 using xda premium

Awesome! Can you tell me the feature you like most while driving? Can't wait to test it with a mount.
I updated the screenshots to show the shortcut created by apk...
I like that it starts the Google Music app, if you click on Music shortcut.

Here is a flashable zip. Flash in cwm. Will install apps to system folder.
http://db.tt/C1hWUUU
Sent from my GT-I9100 using Tapatalk

Thanks for the new files. I really hate that I cannot get the app from the Market, so we get proper updates... Probably Samsung did not wanted the app because they went the VLingo way ("Hi Galaxy") and Google banned the app for all related models.
How I got the app working on my phone:
I Googled forever until I found a compatible cardock launcher file with 2.2.1.4, which for some reason everyone had it named CarHomeLauncher.apk instead of com.android.cardock-8-2.2.apk. Then, I exported both apps with the proper name and version assigned to each file.
Edit: I just found a Google signed package and link it to the first post. I flash it and everything works great.

awesome, thanks

Superb, loving it...
only question -
do you know if it is possible to add a direct dial for a contact?
I can add a contact, but when I press on that added contact I get the contact's options (message/call/email etc...)

Personally I use Voice Search option in Car Home. If I want to call Alex, I just say "Alex" and it will pop the contact. If anyone has other tricks, please share them.
Edit: Whoaa, I just tried the Voice Search feature: "call Alex mobile", it worked!
Works well with specific songs I want to listen to. I said "listen to Thriller":
This is a great app... I'm playing with the other Voice Search options as we speak.

Thanks!
Installed and working perfectly on Epic 4G Touch (SGX2). Thank very much!
So lame that they block us from installing it from the Market. I wonder if it's because of the car-centric crapware that gets bundled on our phone...

yqed said:
Can anyone confirm if the Car Home starts automatically once you place the phone into Samsung Vehicle Dock kit? It should from what Google says... I'm going to get the dock, is damn sweet.
Click to expand...
Click to collapse
Yuck nasty suction mount.
Look up a Brodit Active cradle for the GS2. use inconjunction with the specific pro-clip designed for your car.
You'll never look at another brand of car mount again.

I own a Nokia CK-300 car kit, it connects through the car speakers, mute's them on phone call, connects through bluetooth and streams music through a2dp perfectly. Has a small microphone usually placed close to the driver's head. Also has a small remote control, useless with this phone (voice commands!!)
Will this app work with this car kit? I wonder if Google Car Home will accept commands through BT connection......

RixNox said:
Will this app work with this car kit? I wonder if Google Car Home will accept commands through BT connection......
Click to expand...
Click to collapse
I don't think Google Car Home is what you think it is. All it is is essentially just a launcher with big icons which are easy to see while driving. It also allows auto-launching when it detects connection to any bluetooth device.
Any voice-activated programs are a totally separate thing.

I mean, will Google Car Home accept voice commands passing through BT connection?

RixNox said:
I mean, will Google Car Home accept voice commands passing through BT connection?
Click to expand...
Click to collapse
Google Car Home has nothing to do with voice commands!
If you are talking about Google Voice Search, then no, I haven't found a way to get this to work through a bluetooth microphone. Would be cool, though. In any case, this is off topic and is probably discussed elsewhere.

xak944 said:
Google Car Home has nothing to do with voice commands!
Click to expand...
Click to collapse

That is simply a button which launches this app: https://market.android.com/details?id=com.google.android.voicesearch

Ok, it could have been a process controlled by Google Car Home....

please help
thanks for this post my Samsung galaxy sii t989 needed this

Thanks for the files working great on my T989.

[DFT] BT File Transfer

/DFT BT File Transfer\
Application to transfer files via Bluetooth on WP7 phones
Version 1.01
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Overview​Application allows to receive files via Bluetooth or send files via Bluetooth.
Also application include feature to auto install received REG RGU and XAP files.
So you can send XAP file from PC to your phone and it will be installed at the end.
Same with REG/RGU - you can send a file and it will be applied to registry. Note file must be in UNICODE format. ANSI files don't supported by application.
Application has some unresolved issues:
If send operation was canceled, other side device will save the already received part of file instead of show "canceled" message.
Sometimes it's impossible to receive files without opening Bluetooth settings.
Seems Bluetooth go to some low power mode while state is still ON and CONNECTIBLE.
To send from one WP7 device to another WP7 device you may need keep the destination phone in Bluetooth settings page. Otherwise the first phone can't see the second.
Already paired devices list isn't implemented.
Was tested on phones: ​*Samsung Focus R1.3
*HTC Gold
*HTC Spark
*HTC Schubert
*HTC LEO
Requirements​You need FullUnlock to use this application.
Application will NOT work with Developer or Iterop unlocks.
Should work on all WP7 devices.
Installation​1. Install XAP via any way (via IE or via PC deplorer)
2. Run installed application.
3. Wait until message box appear.
"Fail" can mean that your phone is not FullUnlocked or other issue during installation.
4. Reboot device
5. Run application - it should works.
Uninstallation​Be warned, using this application may need hard reset to remove all parts from the system. Be sure you have actual backup of PIM.
Disclaimer​This product is free to use at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this product on several different devices, your experience may vary.
Use of the Product for commercial purposes is strictly prohibited.
It's not allowed to make any changes to this release.
It's not allowed xda.cn, nduoo forum and 3gdengta forums to use this xap.
Thanks to​ HD2Owner for great art work!
All others for testing and support
It's not allowed to include this XAP into ROMs during 2 weeks after release. Up to 09.03.2012.
Please note: application still have some issues inside, please report your usage experience and feedback in this thread.
Download links​look at attachment
Enjoy!
Best regards, DFT, Cotulla, 24.02.2012​

wow! Installs fine on Omnia7 but I haven't got another phone to attempt sending/receiving.

This is a huge step to Windows Phone development!
Thank you

That amazing THX

cool , and the intergrated file explorer is soooooo fast , really great work

Thank you very much for big business

Testing it out.
I can send just fine, and the file browser works great. Adding an easy photo chooser or something might be nice, though.
As a thought, I can only send files to the device when the Bluetooth menu is open under Settings. Is this intentional? It's not really a problem, but I found it a little interesting; otherwise the device doesn't seem to be visible on other Bluetooth devices. Sounds like part of the WP7 design.
EDIT: I'm able to send files if my computer already knows about the device, regardless of if it's in settings or not. Cool stuff! It's a shame bluetooth is so incredibly slow, though.
Nice work

I tested too and workig fine. Before start app we have to run BT transfer in phone and paired with computer. For good work app must be open. One more time THX Cottula.

it works great ! Focus 1.4

Work great in my HTC MOZART! Send and Recive!
Thanks you very much DFT!

Thanks for that great improvement!! wp7 needs it...hope this app will "mature" fast!!

Works fine on htc pro7, THX for DFT&Cotulla
Sent from my Gold using XDA Windows Phone 7 App

Thanks a lot DFT! Works perfect on HTC HD2!!

Hmmm now I see that worked one (first) time and now I can't send or answer file WTF ?

you rock DFT
hope soon we see RSPL or HSPL on second generation WP Devices

This is really nice
Thanks again DFT.

Video demo for people who don't have it themselves, or are otherwise curious
http://www.youtube.com/watch?v=ULSxte561q0
u jelly?
In all seriousness, so far so good

Worked great in my Omnia 7.. Great work Cotulla, and DFT!!
Now just one question please... My pictures are in My Documents>Zune>Content>0300
And them I have 2 folders 00 and 01 both with pictues in them... How do I identify the latest for example... Is there a way..?
Thank you...

Jaxbot said:
Video demo for people who don't have it themselves, or are otherwise curious
http://www.youtube.com/watch?v=ULSxte561q0
Click to expand...
Click to collapse
Well, first I have a problem, the app stays in:
"Please Wait
(DFT logo)
DFT BT File Transfer V1.01
Aplication needs to install
drivers.
Please reboot your phone."
I've rebooted the phone some times but didnt get it working (HD7)
Also, I'll love to know how you did to put files on the phone (as storage device)
Thanks
EDIT: I have Deepshining 7.1 with latest version 8107

Works great on my HD7! Great work, thanks!