Related
I have a brand new diamond that it just cames from the warranty after 1,5 months of waitting.
The First diamond that i owned had problem with bluetooth - wireless - and gps. .
Now with this one after 3 - 4 rom flashes it became very slow durring boot process.
It hangs on the first screen with the 3 red lines bottom right showing the version of the Radio etc for about 30-40 sec.
I have installed spl 1.40 Olinex.
Also sometime it holds on the customization screen for ever.What is happening ? It have bad blocks and if yes how can i fix it ? task 2a just dont do anything.
With "info 8" command i take:
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x900
Partition[2], type=0x25, start=0xF40, total=0xEC00
Partition[3], type=0x4, start=0xFB40, total=0xB480
CE Total Length(with sector info) = 0x7E1DA00
CE CheckSum Length(without sector info) = 0x7DA0000
Click to expand...
Click to collapse
Please help me out..
Do you need some other info or command output ?
Thanks in advance.
Someone provide me some help please ?
lapator said:
Someone provide me some help please ?
Click to expand...
Click to collapse
Have a little patience! I'm sure OliPro, cmonex or some other big gun will help you as soon as they can.
tnyynt said:
Have a little patience! I'm sure OliPro, cmonex or some other big gun will help you as soon as they can.
Click to expand...
Click to collapse
Ok i realy realy thank you.. I am waitting for some help cause i cant do anything with my phone now.. It cant even boot on windows..
Regards.
lapator said:
Ok i realy realy thank you.. I am waitting for some help cause i cant do anything with my phone now.. It cant even boot on windows..
Regards.
Click to expand...
Click to collapse
Try sending a short PM to Olipro or cmonex.
and post here the results cuz it could be very interesting
wonderiuy said:
and post here the results cuz it could be very interesting
Click to expand...
Click to collapse
Sure.. It will help also others with the same problem..
Try to replace mfg version with dev hard spl 1.93, after that hard reset the device. Using HTC Debug Tool, set all options to 0x0.
Should work normal again.
Cya,
Viper BJK
viperbjk said:
Try to replace mfg version with dev hard spl 1.93, after that hard reset the device. Using HTC Debug Tool, set all options to 0x0.
Should work normal again.
Cya,
Viper BJK
Click to expand...
Click to collapse
Thanks for the reply..
All the option there has value "0" i should change it to "0x0" ?
Also now i have 2 bad blocks in the above command added.
No. 0x0 is 0.
viperbjk said:
No. 0x0 is 0.
Click to expand...
Click to collapse
So now what i have to do to fix that problem ?
What about the bad blocks ?
Where are the bad blocks ?
However bad blocks do not affect system speed, but ROM and SPL does.
Cya,
Viper BJK
viperbjk said:
Where are the bad blocks ?
However bad blocks do not affect system speed, but ROM and SPL does.
Cya,
Viper BJK
Click to expand...
Click to collapse
BLOCK 0 (0x0) is reversed block
BLOCK 1 (0x1) is reversed block
BLOCK 2 (0x2) is reversed block
BLOCK 3 (0x3) is reversed block
BLOCK 8 (0x8) is reversed block
BLOCK 10 (0xA) is reversed block
BLOCK 11 (0xB) is reversed block
BLOCK 12 (0xC) is reversed block
BLOCK 13 (0xD) is reversed block
BLOCK 14 (0xE) is reversed block
BLOCK 957 (0x3BD) is bad block
BLOCK 1508 (0x5E4) is bad block
Partition[0], type=0x20, start=0x2, total=0x63E
Partition[1], type=0x23, start=0x640, total=0x900
Partition[2], type=0x25, start=0xF40, total=0xCA00
Partition[3], type=0x4, start=0xD940, total=0xD680
CE Total Length(with sector info) = 0x6D0CA00
CE CheckSum Length(without sector info) = 0x6CA0000
I had some problems flashing a Rom..
After some tries i used mtty..
Cmd>task 32
Level = FF
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 433
Storage Total block: 503
Total Bad Block in CE: 0
NeedToEraseBlockStart: 446
NeedToEraseBlockEnd: 936
Storage format success
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x18100
Partition[3], type=0x4, start=0x1B100, total=0x1F700
CE Total Length(with sector info) = 0x36F8800
CE CheckSum Length(without sector info) = 0x3620000
I tried to whit other Hard spl and sspl but everytime the same..
Cmd>task 32
Level = 0
Cmd>task 28 55aa
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 433
Storage Total block: 503
Total Bad Block in CE: 0
NeedToEraseBlockStart: 446
Storage format success
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 433
Storage Total block: 503
Total Bad Block in CE: 0
NeedToEraseBlockStart: 446
Storage format success
Cmd>task 2a
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x18100
Partition[3], type=0x4, start=0x1B100, total=0x1F700
CE Total Length(with sector info) = 0x36F8800
CE CheckSum Length(without sector info) = 0x3620000
Cmd>
How can i fix it...??
thx
...
up
...
I have the same problem.
any solution?????
yeah me too..my P3600i was fine with until i start flashing..I also got the same result.After using mtty..perhaps our method is wrong.Any experts here pls help us "i" users.
On the P3600, it is normal to have a bad block #6 after MTTY. It still functions normally with that.
On the P3600i, I'm sure there is also at least one bad block, but maybe they are different locations.
Someone with a good P3600i know the desired results?
maybe there is no one with good P3600i.Is there any other way to figure it out?Someone who have the original rom maybe?
Mtty116 IS A TROJAN??
I wonder why is so hard to find this cute little software..
This is why..
http://www.virustotal.com/file-scan/report.html?id=b0e2343a89aeb002c8bdd53fcf1643bfff5ca056290b2fdf16b66a8f13c8238a-1283316550
Qamarzamsyawal said:
I wonder why is so hard to find this cute little software..
This is why..
http://www.virustotal.com/file-scan/report.html?id=b0e2343a89aeb002c8bdd53fcf1643bfff5ca056290b2fdf16b66a8f13c8238a-1283316550
Click to expand...
Click to collapse
My guess would be that this is due to the fact that the software 'MTTY' is specifically designed to modify the Operating System, thus the Trojan Warning. For those who do not know what it's for, they could cause damage to their systems. This is just a theory. I've used MTTY for a couple years now, and have not noticed any adverse side effects, but maybe I'm missing something...
By all means, if you are not comfortable using it, please do not. Better safe than sorry.
One Bad Block is down..One more to go
Hey Sport!!
Successfully erase one bad block from my P3600i. But there is another one. It won't come out. Do anyone know why is this happen??
This is my result using "mtty116.exe"
Cmd>set 14 0
Write Nand Success
HTCST ÚÈÒHTCE
Cmd>task 28 55aa
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 646
Storage Total block: 1357
Total Bad Block in CE: 0
NeedToEraseBlockStart: 659
NeedToEraseBlockEnd: 2003
Storage format success
Cmd>task 0
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x346(838) is BAD block !!!
Block 0x792(1938) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0xFE
Partition[1], type=0x23, start=0x100, total=0x1300
Partition[2], type=0x25, start=0x1400, total=0x27200
Partition[3], type=0x4, start=0x28600, total=0x54D00
CE Total Length(with sector info) = 0x5203000
CE CheckSum Length(without sector info) = 0x50C0000
Cmd>password
Cmd>task 32
Level = 0
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 646
Storage Total block: 1357
Total Bad Block in CE: 0
NeedToEraseBlockStart: 659
NeedToEraseBlockEnd: 2003
Storage format success
Cmd>task 2A
Check block : 838 - Good
Check block : 1938 - Bad
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x792(1938) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0xFE
Partition[1], type=0x23, start=0x100, total=0x1300
Partition[2], type=0x25, start=0x1400, total=0x27200
Partition[3], type=0x4, start=0x28600, total=0x54D00
CE Total Length(with sector info) = 0x5203000
CE CheckSum Length(without sector info) = 0x50C0000
Cmd>task 8
my P3600 have 2 BAD block, how can I fix it ?
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3E2(994) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1500
Partition[2], type=0x25, start=0x2E00, total=0x1D100
Partition[3], type=0x4, start=0x1FF00, total=0x5C400
CE Total Length(with sector info) = 0x40DF800
CE CheckSum Length(without sector info) = 0x3FE0000
Cmd>
I have 4 BAD BLOCK
----------------------------------------
Cmd>task 2A
Check block : 176 - Bad
Check block : 371 - Bad
Check block : 545 - Bad
Check block : 993 - Bad
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xB0(176) is BAD block !!!
Block 0x173(371) is BAD block !!!
Block 0x221(545) is BAD block !!!
Block 0x3E1(993) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x23000
Partition[3], type=0x4, start=0x26100, total=0x58F00
CE Total Length(with sector info) = 0x4D50800
CE CheckSum Length(without sector info) = 0x4C20000
Cmd>task 8
plz.. help me.. my smartphon Not started...I tried everything but ROM- No Entry
Cmd>task 32
task 32
Level = 0
Cmd>lnbs mymac.bin 75108000
lnbs mymac.bin 75108000
Format by TrueFFS ver.: 7.1.0
:F=mymac.bin
:A=75108000
:O=00000000
:L=FFFFFFFF
start NB image download
SH
Load ADDR: 75108000 Length: 13
Programming DOC flash blocks by serial port...
Buffer=4M,0x400000
DOCInfoTableinitHW+
Binary0 Size: 0x200000
FAT0 Size: 0x5000000
FAT1 Size: 0xB00000
FAT2 Size: 0x9080000
All Size: 0xED80000
FAT0_ADDR=0x200000,FAT1_ADDR=0x5200000,FAT2_ADDR=0 x5D00000
ERROR: NO header matched
Transfer CERT error
Flash Programing Error
Please help me
Here is a Video on how to bypass the setup wizard and enable usb debugging.
https://www.youtube.com/watch?v=VYU-Fs_lJ1c
Bro my droid turbo doesn't have developer options enabled! build number is locked!
its April security patch level.. plzz help
skyrio said:
Bro my droid turbo doesn't have developer options enabled! build number is locked!
its April security patch level.. plzz help
Click to expand...
Click to collapse
this is as far as i have gotten on the Droid Turbo 2
Tomsgt said:
this is as far as i have gotten on the Droid Turbo 2
Click to expand...
Click to collapse
Thank you so much bro for video..
but i already know this method.. this is not a completely bypass and one more thing in this method calling not working at all. you can call someone easily but you cant receive call.. it says the operator is busy.. any way to bypass account completely?
Thank You
skyrio said:
Thank you so much bro for video..
but i already know this method.. this is not a completely bypass and one more thing in this method calling not working at all. you can call someone easily but you cant receive call.. it says the operator is busy.. any way to bypass account completely?
Thank You
Click to expand...
Click to collapse
ok i have a full FRP bypass for this device coming really soon editing the video now
Tomsgt said:
ok i have a full FRP bypass for this device coming really soon editing the video now
Click to expand...
Click to collapse
Thanks a bunch Sir <3 Thanks alot will try this on my phone..
skyrio said:
Thanks a bunch Sir <3 Thanks alot will try this on my phone..
Click to expand...
Click to collapse
let me know how it works for you
Tomsgt said:
let me know how it works for you
Click to expand...
Click to collapse
sir i tried this method on moto x 2nd generation.. but encrypt phone button is locked in test dpc. even battery is 80% charged. what should i do? Sorry for disturbing you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sir it doesnt showing device owners option..
Sent from my SM-G900T using XDA-Developers mobile app
potential clue?
1. enter bootloader/fastboot by holding vol down before and while inserting USB cable with data connection
2. boot in "factory mode"
3. only in factory mode will RSD lite show a phone when booted into the full system interface.
booting in other modes renders this grid empty usually
4. when I initiate an image flash while booted in factory mode, I see a bunch of processes terminate "app has stopped" errors quickly flash on the phone screen while RSD lite says "rebooting into flash mode" ....
5. so this is where I pass it on to everyone else. as far as I knew, the only way to send reboot commands to the phone was via ADB. RSD lite seems to have some kind of magical ADB-ish command that it is sending to the phone in order to reboot it. would it be possible to wireshark that data and look at it?
for me this is the main block ... no matter how many times I hit "build number" I do not get the familiar developer mode message when using the workarounds in the youtube videos
Hello, ive been reading about bootloader unlocking and rooting. I was able to enable developer settings and enable USB debugging. Is anyone else trying to get this phone unlocked with me? I hope not, so if u have any opinions or suggestions let them out!! ?
anyone have try this methode on new update firmware ?
Android Security Patch Level : May 1, 2016
System Version : 24.14.16. Kinzie_verzon.verizon.en.US
Build number : MCK24.78-13.16
henhida said:
anyone have try this methode on new update firmware ?
Android Security Patch Level : May 1, 2016
System Version : 24.14.16. Kinzie_verzon.verizon.en.US
Build number : MCK24.78-13.16
Click to expand...
Click to collapse
That Solution Not Working On New Secuirty Patch !
I have motorola droid turbo xt1254 with google id lock and when i am trying to tap on build number for unlocking developer option, nothing happens ((, can anyone halp me?
Thanks in advance
Hello all. I been seeing good deals on ebay for the turbo 2. Find one for $160 but it's Google locked. I have the factory Motorola cable. Will that help do anything in resetting to phone in RSS lite or do you need to boot in factory? Would like to pick this phone up and save $50 or more from buying one that is not.
umairabubakkar said:
pwrdbykyank said:
Here is a Video on how to bypass the setup wizard and enable usb debugging.
Here is new Method of Motorola Droid Turbo XT1254 FRP Solution
http://www.lahoremobile.net/motorola-droid-turbo-xt1254-frp.html
Click to expand...
Click to collapse
the web site it's showing the wrong command lines
INCORRECT: content insert -uri content://settings/secure -bind name:s:user_setup_complete -bind value:s:1
CORRECT: content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
it work for me with on
motorola droid turbo xt1254 (verizon)
android 5. 1 / su4tl-49 /version: 23.21.49 / f14.mot.xt1254.0
security pacht: 2016-04-01
Click to expand...
Click to collapse
Thank you so mouch for me help sir
Gurrumichi said:
umairabubakkar said:
the web site it's showing the wrong command lines
INCORRECT: content insert -uri content://settings/secure -bind name:s:user_setup_complete -bind value:s:1
CORRECT: content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
it work for me with on
motorola droid turbo xt1254 (verizon)
android 5. 1 / su4tl-49 /version: 23.21.49 / f14.mot.xt1254.0
security pacht: 2016-04-01
Click to expand...
Click to collapse
Yes he is absolutely right i have done and posted all detail how to root Motorola droid turbo with latest security and how to bypass google account on my blog post. I have also uploaded apps to my server and given direct links. i am unable to post link so please copy and paste give link to your browser.
pakfones.com/motorola-droid-turbo-google-account-bypass-new-security-2016/
Click to expand...
Click to collapse
Successed wipe FRP in hardstyle way. Pull off eMMC from PCB and soldered back. Logs here :
Code:
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 1414FD121D756485, ,FW Ver.: 01.56
CMD Pullup Level:1175 mV
CMD Active Level:1515 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 11010030333247373200B36CDA6E924E
EMMC CSD : D02700320F5903FFFFFFFFE78640009A
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 09/2015 Rev.0x0
EMMC NAME: 032G72 , S/N: 3010255470
EMMC NAME (HEX): 30333247373200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 032G72_3010255470_20161111_1758.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 48
MMCBLK0P0 (MODEM) Range: [0X20000,0X3FFFE00] ,Len: 3FE0000
MMCBLK0P1 (PMIC) Range: [0X4000000,0X400B200] ,Len: B400
MMCBLK0P2 (SBL1) Range: [0X4020000,0X40DB600] ,Len: BB800
MMCBLK0P3 (DDR) Range: [0X4120000,0X421FE00] ,Len: 100000
MMCBLK0P4 (ABOOT) Range: [0X4220000,0X434BE00] ,Len: 12C000
MMCBLK0P5 (RPM) Range: [0X4397000,0X43CCA00] ,Len: 35C00
MMCBLK0P6 (TZ) Range: [0X4414000,0X44A3A00] ,Len: 8FC00
MMCBLK0P7 (SDI) Range: [0X4514000,0X452BE00] ,Len: 18000
MMCBLK0P8 (HYP) Range: [0X452C000,0X453EA00] ,Len: 12C00
MMCBLK0P9 (UTAGS) Range: [0X45AC000,0X462BE00] ,Len: 80000
MMCBLK0P10 (PADA) Range: [0X462C000,0X47FFE00] ,Len: 1D4000
MMCBLK0P11 (ABOOTBACKUP) Range: [0X4800000,0X492BE00] ,Len: 12C000
MMCBLK0P12 (RPMBACKUP) Range: [0X4977000,0X49ACA00] ,Len: 35C00
MMCBLK0P13 (TZBACKUP) Range: [0X49F4000,0X4A83A00] ,Len: 8FC00
MMCBLK0P14 (HYPBACKUP) Range: [0X4AF4000,0X4B06A00] ,Len: 12C00
MMCBLK0P15 (UTAGSBACKUP) Range: [0X4B74000,0X4BF3E00] ,Len: 80000
MMCBLK0P16 (PMICBACKUP) Range: [0X4C00000,0X4C0B200] ,Len: B400
MMCBLK0P17 (BLUETOOTH) Range: [0X4C20000,0X4E1FE00] ,Len: 200000
MMCBLK0P18 (PADB) Range: [0X4E20000,0X4FFFE00] ,Len: 1E0000
MMCBLK0P19 (MODEMST1) Range: [0X5000000,0X517FE00] ,Len: 180000
MMCBLK0P20 (MODEMST2) Range: [0X5180000,0X52FFE00] ,Len: 180000
MMCBLK0P21 (HOB) Range: [0X5300000,0X5379E00] ,Len: 7A000
MMCBLK0P22 (DHOB) Range: [0X537A000,0X5381E00] ,Len: 8000
MMCBLK0P23 (FSG) Range: [0X53A0000,0X551FE00] ,Len: 180000
MMCBLK0P24 (FSC) Range: [0X5520000,0X5520200] ,Len: 400
MMCBLK0P25 (CID) Range: [0X5520400,0X5540200] ,Len: 20000
MMCBLK0P26 (MISC) Range: [0X5540400,0X55C0200] ,Len: 80000
MMCBLK0P27 (METADATA) Range: [0X55C0400,0X5640200] ,Len: 80000
MMCBLK0P28 (LOGS) Range: [0X5640400,0X5840200] ,Len: 200000
MMCBLK0P29 (LIMITS) Range: [0X5860000,0X5860200] ,Len: 400
MMCBLK0P30 (LOGO) Range: [0X5880000,0X607FE00] ,Len: 800000
MMCBLK0P31 (CLOGO) Range: [0X6080000,0X6B7FE00] ,Len: B00000
MMCBLK0P32 (FRP) Range: [0X6B80000,0X6BFFE00] ,Len: 80000
MMCBLK0P33 (PERSIST) Range: [0X6C00000,0X73FFE00] ,Len: 800000
MMCBLK0P34 (KPAN) Range: [0X7400000,0X7BFFE00] ,Len: 800000
MMCBLK0P35 (BOOT) Range: [0X7C00000,0XA3FFE00] ,Len: 2800000
MMCBLK0P36 (RECOVERY) Range: [0XA400000,0XCC13E00] ,Len: 2814000
MMCBLK0P37 (SSD) Range: [0XCC20000,0XCC21E00] ,Len: 2000
MMCBLK0P38 (LOGS-CHARGING) Range: [0XCC22000,0XCF21E00] ,Len: 300000
MMCBLK0P39 (PADC) Range: [0XCF22000,0XCFFFE00] ,Len: DE000
MMCBLK0P40 (SP) Range: [0XD000000,0XD7FFE00] ,Len: 800000
MMCBLK0P41 (KEYSTORE) Range: [0XD800000,0XDFFFE00] ,Len: 800000
MMCBLK0P42 (CUSTOMIZE) Range: [0XE000000,0XFFFFE00] ,Len: 2000000
MMCBLK0P43 (OEM) Range: [0X10000000,0X10FFFE00] ,Len: 1000000
MMCBLK0P44 (CARRIER) Range: [0X11000000,0X11FFFE00] ,Len: 1000000
MMCBLK0P45 (CACHE) Range: [0X12000000,0X41FFFE00] ,Len: 30000000
MMCBLK0P46 (SYSTEM) Range: [0X42000000,0X141FFFE00] ,Len: 100000000
MMCBLK0P47 (USERDATA) Range: [0X142000000,0X745BDFE00] ,Len: 603BE0000
Done...Presets has been updated...
Done.
Running:Format FRP Partition...
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 1414FD121D756485, ,FW Ver.: 01.56
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 11010030333247373200B36CDA6E924E
EMMC CSD : D02700320F5903FFFFFFFFE78640009A
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 09/2015 Rev.0x0
EMMC NAME: 032G72 , S/N: 3010255470
EMMC NAME (HEX): 30333247373200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
GPT Entries Count = 48
Searching for FRP Data...
Marker of 6b80000 is: 19901873
FRP/Persistent Storage Format Success!
Searching for KillSwitch Specific FRP Data...
LG Custom Data is not found!
Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 603BE0000 bytes from 142000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 30000000 bytes from 12000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 02000000 bytes from 0E000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 00B00000 bytes from 06080000 ...ROM1
Erase Done.
this is good news
any pics logs or docs hardware software that you can share would be awesome
vim1 said:
Successed wipe FRP in hardstyle way. Pull off eMMC from PCB and soldered back. Logs here :
Code:
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 1414FD121D756485, ,FW Ver.: 01.56
CMD Pullup Level:1175 mV
CMD Active Level:1515 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 11010030333247373200B36CDA6E924E
EMMC CSD : D02700320F5903FFFFFFFFE78640009A
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 09/2015 Rev.0x0
EMMC NAME: 032G72 , S/N: 3010255470
EMMC NAME (HEX): 30333247373200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.7 (MMC 5.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: 032G72_3010255470_20161111_1758.extcsd
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Warning: Entries Count = 48
MMCBLK0P0 (MODEM) Range: [0X20000,0X3FFFE00] ,Len: 3FE0000
MMCBLK0P1 (PMIC) Range: [0X4000000,0X400B200] ,Len: B400
MMCBLK0P2 (SBL1) Range: [0X4020000,0X40DB600] ,Len: BB800
MMCBLK0P3 (DDR) Range: [0X4120000,0X421FE00] ,Len: 100000
MMCBLK0P4 (ABOOT) Range: [0X4220000,0X434BE00] ,Len: 12C000
MMCBLK0P5 (RPM) Range: [0X4397000,0X43CCA00] ,Len: 35C00
MMCBLK0P6 (TZ) Range: [0X4414000,0X44A3A00] ,Len: 8FC00
MMCBLK0P7 (SDI) Range: [0X4514000,0X452BE00] ,Len: 18000
MMCBLK0P8 (HYP) Range: [0X452C000,0X453EA00] ,Len: 12C00
MMCBLK0P9 (UTAGS) Range: [0X45AC000,0X462BE00] ,Len: 80000
MMCBLK0P10 (PADA) Range: [0X462C000,0X47FFE00] ,Len: 1D4000
MMCBLK0P11 (ABOOTBACKUP) Range: [0X4800000,0X492BE00] ,Len: 12C000
MMCBLK0P12 (RPMBACKUP) Range: [0X4977000,0X49ACA00] ,Len: 35C00
MMCBLK0P13 (TZBACKUP) Range: [0X49F4000,0X4A83A00] ,Len: 8FC00
MMCBLK0P14 (HYPBACKUP) Range: [0X4AF4000,0X4B06A00] ,Len: 12C00
MMCBLK0P15 (UTAGSBACKUP) Range: [0X4B74000,0X4BF3E00] ,Len: 80000
MMCBLK0P16 (PMICBACKUP) Range: [0X4C00000,0X4C0B200] ,Len: B400
MMCBLK0P17 (BLUETOOTH) Range: [0X4C20000,0X4E1FE00] ,Len: 200000
MMCBLK0P18 (PADB) Range: [0X4E20000,0X4FFFE00] ,Len: 1E0000
MMCBLK0P19 (MODEMST1) Range: [0X5000000,0X517FE00] ,Len: 180000
MMCBLK0P20 (MODEMST2) Range: [0X5180000,0X52FFE00] ,Len: 180000
MMCBLK0P21 (HOB) Range: [0X5300000,0X5379E00] ,Len: 7A000
MMCBLK0P22 (DHOB) Range: [0X537A000,0X5381E00] ,Len: 8000
MMCBLK0P23 (FSG) Range: [0X53A0000,0X551FE00] ,Len: 180000
MMCBLK0P24 (FSC) Range: [0X5520000,0X5520200] ,Len: 400
MMCBLK0P25 (CID) Range: [0X5520400,0X5540200] ,Len: 20000
MMCBLK0P26 (MISC) Range: [0X5540400,0X55C0200] ,Len: 80000
MMCBLK0P27 (METADATA) Range: [0X55C0400,0X5640200] ,Len: 80000
MMCBLK0P28 (LOGS) Range: [0X5640400,0X5840200] ,Len: 200000
MMCBLK0P29 (LIMITS) Range: [0X5860000,0X5860200] ,Len: 400
MMCBLK0P30 (LOGO) Range: [0X5880000,0X607FE00] ,Len: 800000
MMCBLK0P31 (CLOGO) Range: [0X6080000,0X6B7FE00] ,Len: B00000
MMCBLK0P32 (FRP) Range: [0X6B80000,0X6BFFE00] ,Len: 80000
MMCBLK0P33 (PERSIST) Range: [0X6C00000,0X73FFE00] ,Len: 800000
MMCBLK0P34 (KPAN) Range: [0X7400000,0X7BFFE00] ,Len: 800000
MMCBLK0P35 (BOOT) Range: [0X7C00000,0XA3FFE00] ,Len: 2800000
MMCBLK0P36 (RECOVERY) Range: [0XA400000,0XCC13E00] ,Len: 2814000
MMCBLK0P37 (SSD) Range: [0XCC20000,0XCC21E00] ,Len: 2000
MMCBLK0P38 (LOGS-CHARGING) Range: [0XCC22000,0XCF21E00] ,Len: 300000
MMCBLK0P39 (PADC) Range: [0XCF22000,0XCFFFE00] ,Len: DE000
MMCBLK0P40 (SP) Range: [0XD000000,0XD7FFE00] ,Len: 800000
MMCBLK0P41 (KEYSTORE) Range: [0XD800000,0XDFFFE00] ,Len: 800000
MMCBLK0P42 (CUSTOMIZE) Range: [0XE000000,0XFFFFE00] ,Len: 2000000
MMCBLK0P43 (OEM) Range: [0X10000000,0X10FFFE00] ,Len: 1000000
MMCBLK0P44 (CARRIER) Range: [0X11000000,0X11FFFE00] ,Len: 1000000
MMCBLK0P45 (CACHE) Range: [0X12000000,0X41FFFE00] ,Len: 30000000
MMCBLK0P46 (SYSTEM) Range: [0X42000000,0X141FFFE00] ,Len: 100000000
MMCBLK0P47 (USERDATA) Range: [0X142000000,0X745BDFE00] ,Len: 603BE0000
Done...Presets has been updated...
Done.
Running:Format FRP Partition...
Z3X EasyJtag Software ver. 2.4.1.1
Loading eMMC Addon Firmware... IO: 1800 mV
Box S/N: 1414FD121D756485, ,FW Ver.: 01.56
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------
EMMC CID : 11010030333247373200B36CDA6E924E
EMMC CSD : D02700320F5903FFFFFFFFE78640009A
EMMC Manufacturer ID: 0011 , OEM ID: 0100
EMMC Date: 09/2015 Rev.0x0
EMMC NAME: 032G72 , S/N: 3010255470
EMMC NAME (HEX): 30333247373200
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Searching for partition tables...
Detected GPT over MBR...
Medium UUID: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
GPT Entries Count = 48
Searching for FRP Data...
Marker of 6b80000 is: 19901873
FRP/Persistent Storage Format Success!
Searching for KillSwitch Specific FRP Data...
LG Custom Data is not found!
Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 603BE0000 bytes from 142000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 30000000 bytes from 12000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 02000000 bytes from 0E000000 ...ROM1
Erase Done.
Z3X EasyJtag Software ver. 2.4.1.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1691 mV
CMD Active Level:1763 mV
Box IO Level:1800 mV
CLK Rate:21000 khz
Erasing 00B00000 bytes from 06080000 ...ROM1
Erase Done.
Click to expand...
Click to collapse
Hi all! I have Kindle Fire HD 8.9 (root, stock 8.4.9), locked with password. My niece tried log in, she enters the password several times, but could not enter, then she just turned off(press power off button). When I tried to enter, the system is don’t requested a password, language was French, and all of the data disappeared since the beginning of 2015. Yes, I know, I need to backup, but I keep going use it.
Later I known in this model, if lead many times an incorrect password, it launch a factory reset, or proposes to do so, my niece does not know English, so ...............
I have read a few instructions, and was able to rooted again and download to my computer directly from the tablet dump memory:mmcblk0 from /dev/block/*. This is the largest unit, so that it should contain all the data, also i download mmcblkp13 /dev/block/platform/omap/omap_hsmmc.1/ *. It is the user's data. All in *.raw format. Scan R-studio and other programs, but all I found was data information from the default firmware.
I read that when you reset, the data do not disappear completely. Then I found one file, I think it only indicates what happened:
last log file:
Starting recovery on Fri Jul 15 18:33:45 2016
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1920 x 1200)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /sdcard vfat /dev/block/sda1 (null) 0
2 /system ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/system (null) 0
3 /cache ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/cache (null) 0
4 /data ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata (null) 0
5 /misc emmc /dev/block/platform/omap/omap_hsmmc.1/by-name/misc (null) 0
6 /boot emmc /dev/block/platform/omap/omap_hsmmc.1/by-name/boot (null) 0
7 /recovery emmc /dev/block/platform/omap/omap_hsmmc.1/by-name/recovery (null) 0
8 /bootloader emmc /dev/block/platform/omap/omap_hsmmc.1/by-name/bootloader (null) 0
9 /xloader emmc /dev/block/platform/omap/omap_hsmmc.1/by-name/xloader (null) 0
I:Boot command: boot-recovery
I:Got arguments from /cache/recovery/command
Battery capacity = 99%
Battery temp = 235 (in dCdegree)
Battery status = discharging
stat() of /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata succeeded on try 1
Command: "/sbin/recovery" "--wipe_data" "--batt_level=40"
Recovery counter: 0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
ro.build.id=IMM76D
ro.build.display.id=IMM76D
ro.build.version.incremental=8.4.7_user_4730020
ro.build.version.number=04730020
ro.build.version.name=8.4.7
ro.build.lab126.buildtype=Nightly
ro.build.lab126.build=300
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri Aug 2 17:18:29 PDT 2013
ro.build.date.utc=1375489109
ro.build.type=user
ro.build.user=ubuntu
ro.build.host=ip-10-222-195-0
ro.build.tags=test-keys
ro.build.platform.version=UNKNOWN
ro.product.model=KFJWI
ro.product.brand=Amazon
ro.product.name=Kindle Fire
ro.product.device=Kindle
ro.product.board=blaze_tablet
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Amazon
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
ro.build.product=jem
ro.build.description=jem-user 4.0.4 IMM76D 8.4.7_user_4730020 test-keys
ro.build.fingerprint=Android/jem/jem:4.0.4/IMM76D/8.4.7_user_4730020:user/test-keys
ro.build.characteristics=tablet
rild.libpath=/system/lib/libril-lab126qmi.so
com.ti.omap_enhancement=true
opencore.asmd=1
keyguard.no_require_sim=1
wifi.interface=wlan0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.sf.lcd_density=240
ro.opengles.version=131072
omap.audio.mic.main=AMic0
omap.audio.mic.sub=AMic1
omap.audio.power=PingPong
sys.usb.vid=1949
sys.usb.pid=0008
ro.camera.sound.forced=0
dolby.audio.sink.info=speaker
ro.lab126.skipscreenshots=1
persist.lab126.sys.usb.mtp=1
com.lab126.reap=1
com.lab126.trim=1
pcb.temp.sensor.sysfs.node=/sys/devices/platform/omap/omap_i2c.3/i2c-3/3-0070/temp1_input
batt.temp.sensor.sysfs.node=/sys/class/power_supply/bq27541/temp
cpu.temp.sensor.sysfs.node=/sys/devices/platform/omap/omap_temp_sensor.0/temp1_input
hotspot.temp.sensor.sysfs.node=/sys/class/thermal_sensor/thermal_sensor0/device/hotspot_temp
charge.current.sysfs.node=/sys/class/power_supply/smb347_usb/device/charge_current
ro.sf.hwrotation=90
telephony.sms.send=false
persist.whirlwind.enabled=0
persist.whirlwind.unplugged=0
persist.whirlwind.bandscan=0
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
hwui.render_dirty_regions=false
persist.hwc.mirroring.region=0:0:1920:1200
persist.hwc.mirroring.transform=1
persist.lab126.chargeprotect=1
persist.lab126.touchnoisereject=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=B0CC0603302501R0
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=bowser
ro.revision=0
ro.product.processor=omap4470
init.svc.watchdog=running
init.svc.recovery=running
Formatting /data...
Creating filesystem with parameters:
Size: 60814262272
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 14847232
Block groups: 454
Reserved block group size: 1024
Created filesystem with 11/3711904 inodes and 279050/14847232 blocks
Formatting /cache...
Creating filesystem with parameters:
Size: 681574400
Block size: 4096
Blocks per group: 32768
Inodes per group: 6944
Inode size: 256
Journal blocks: 2600
Label:
Blocks: 166400
Block groups: 6
Reserved block group size: 47
Created filesystem with 11/41664 inodes and 5415/166400 blocks
Time spent in the recovery: 124.00 seconds
I'm worried about Null 0 operation - whats it is mean?
Its list of partitition:
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0boot0: 2 MB, 2097152 bytes
4 heads, 16 sectors/track, 64 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0boot0 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0boot1: 2 MB, 2097152 bytes
4 heads, 16 sectors/track, 64 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p13: 60.8 GB, 60814262272 bytes
4 heads, 16 sectors/track, 1855904 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p13 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p12: 681 MB, 681574400 bytes
4 heads, 16 sectors/track, 20800 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p12 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p11: 929 MB, 929038336 bytes
4 heads, 16 sectors/track, 28352 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p11 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p10: 8 MB, 8388608 bytes
4 heads, 16 sectors/track, 256 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p10 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p9: 8 MB, 8388608 bytes
4 heads, 16 sectors/track, 256 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p9 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p8: 16 MB, 16777216 bytes
4 heads, 16 sectors/track, 512 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p8 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p7: 67 MB, 67108864 bytes
4 heads, 16 sectors/track, 2048 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p7 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p6: 10 MB, 10485760 bytes
4 heads, 16 sectors/track, 320 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p6 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p5: 0 MB, 2048 bytes
4 heads, 16 sectors/track, 0 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p5 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p4: 0 MB, 16384 bytes
4 heads, 16 sectors/track, 0 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p4 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p3: 0 MB, 65536 bytes
4 heads, 16 sectors/track, 2 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p3 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p2: 0 MB, 262144 bytes
4 heads, 16 sectors/track, 8 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p2 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p1: 0 MB, 131072 bytes
4 heads, 16 sectors/track, 4 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0p1 doesn't contain a valid partition table
Disk /dev/block/platform/omap/omap_hsmmc.1/mmcblk0: 62.5 GB, 62537072640 bytes
256 heads, 63 sectors/track, 7573 cylinders
Units = cylinders of 16128 * 512 = 8257536 bytes
Device Boot Start End Blocks Id System
/dev/block/platform/omap/omap_hsmmc.1/mmcblk0p1 1 7574 61071359+ ee EFI GPT
Maybe someone knows, there can be a way to raise the data may have some manipulation of data blocks or there are nothing here, all the data were erase and it makes no sense to do something(special firm ), so the question for those who understand?
I'm curious as to what command you used to dump the kindle data. If you used ADB's backup mechanisms, I don't see why you couldn't restore via ADB as well. If you directly ran dd (either on the device or through a shell on a computer connected to it), that's a little more complex. Also, how big are your backup files, and what partition(s) did you dump?
Hi! I used instructions in this thread http://forum.xda-developers.com/showthread.php?t=1818321
I found blocks of partition on my device in these paths: /dev/block/platform/omap/omap_hsmmc.1/* and /dev/block/* .They have mmcblk0* names, mmcblk0 and 13 parts, they have names mmcblk0p1-mmcblk0p13. Block mmcblk0 - largest, he contain all blocks, mmcblk0p13-user data, he also big. So I copy mmcblk0 (62,5gb) and mmcblk0p13(60,8gb) block in *.raw format directly to my PC( I have kindle with 64gb version). I scanned with the R-studio/R-Linux these blocks and i found nothing, only files and folders from usual default stock firmware. It looks like I have a new tablet from shop, all information that i have before it is gone(before it happened, my tablet was rooted, so in system folder left root checker app, and from previous google account, apps and also all that i did with system before-for example removed stock app-office ). So can you look in information that i found in last_log.txt file above. There the same date and time, when i think tablet launch factory reset itself, it contain "(null) 0" operation in each block of partitions and i think it erase permanently all my data. I think it didn’t was a usual factory reset, i think it feature was added by Amazon to reset all tablets they receive from buyers, but I didn’t know about that.