Bluetooth car radio microphone no output volume - P3300, MDA Compact III General

Hi chaps, I have a new bluetooth car radio but the mic outputs really low volume, before I start moaning to the suppliers of the unit is it at all possible that it's something to do with my Artemis ? (it pairs fine and I can hear people calling me, dial tone etc) many thanks Roger

Related

GPSaudio (headphonesJack) and Phone audio (BT) at same time?

Hi!
I was wondering if I could use at the same time:
-the headphones jack to get the navigator audio out
.the BT headset for handsfree conversations
or does the use of the headphones prevents phone conversations through BT?
Thanks!
Chris
P.S.: I have a iMate PDA2k if it is relevant
Re: GPSaudio (headphonesJack) and Phone audio (BT) at same t
Freaky - i was about to ask the same question!
you know what? i'm being a bit thick - i'll try it tonight at home and let you know - I can try this now i've fitted my BT car kit.
i'll just plug in the headphones and see what happens.
Thank you!
Please let me know how it goes!
Chris
Since no-one has posted a result, I'll tell you what I found.
First tested by running media player on headset and receiving incoming call on BT: This aswered call and placed MPlayer in 'pause'. Had to press play when call ended.
Then ran TT with incoming call: All voice instructions were muted during call, but were restored when call ended.
I am about to buy an amplified Cradle and bluetooth Car-Kit, but if anyone knows how to get the voice superimposed over the phone-call, I would like to hear from you; one of the biggest advantages of TT is to have a reminder to turn off the motorway at a particular junction when you are in the middle of a conversation!

[Q] BT Stereo Headset for 02 ATOM

Hi all,
There was problems with the BT Stereo headsets for 02 ATOM with the previous ROM. I would like to poll everyone's opinion if the latest ROM updates have resolved the problems, and which headset is now working beautifully with ATOM.
Please advise, thanks!!!!
itech BT stereo headset works good with my Atom
BT headset Logitech 0228A works fine
BT headset Logitech 0228A works fine
Voice Dialing Not Working
My Plantronics 640 headset works well, but my Voice Dialer thru the BT headset doesn't work with the 0402606 ROM--though it did with the original 0102306 ROM.
Any resolutions?
anyone try with Samsung SBH100? It is a A2DP spec stereo headset. BT 1.2.
Using Motorola HS850 easy connection no problem. But can't get the voice dialing to work.
Jabra BT620s w/ latest firmware
* A2DP - ok but random hiccups. Perfect quality with Pc
* Vol - Too soft on Atom, had to preamp. Perfect quality with Pc
* AVRCP - Perfect but only in WM10
* Phone - Sometime fail to answer a call by headset when music still playing, must manual
We wish the next firmware would improvise the A2DP, great feature but buggy...
bro, how much u paid for the jabra bt620s in SG?
Third headset and no success
I need a small headset, what I can use for Skype on my Atom and to listen to mp3. How's the Plantronic 640 working? Does it support the A2DP profile? I don't wanna have one of these big Stereo BT Headsets... I also tried the btaudio program, what works perfectly for the sound, but the mic quality is too poor, nobody understands me by using skype...
Please give me your recommendations which one works 100% and supports all the features...
Thanks
Ellork
Motorola HT 820 works great with Atom Exec. Audio is loud and clear with lots of bass, and WMP 10 pauses on incoming call (press left button to answer) and resumes after hangup (press left button again). Good thing is you only hear beeps for incoming call not a 110db ringtone...You can use your Atom charger to charge the headset too.
???
hi guys, "BT headset" + Atom will get "real" stereo sound, right ???? I know that Atom does not have bluetooth with "A2DP".

An enigma...

I have a Helmi Broadcaom BT stac on my Universal. A day ago I 've bought a BT stereo headphones type Siemens HHB-750. It has function both HF and Hi-FI stereo ouput. The enigma is that the headphones works gerat as a stereo wireess, but I cannot put it to work as HF. When a call comes or when I dail a number I can hear from headphones a gently noise, but voice is still heard form Universal's speaker. I 've tried with another BT HF and I've got the same result, eg. Universal can detect the device, can connect itself with it, but during a call it cannot switch sound form bulid-in speaker to a BT headset working as HF. What to do?
Hi there, have you verified that you BT headphones have all their functions enabled in their profile?
Open the comm manager, Bluetooth settings, look for your phones (with the phones on, update the available services if needed), tap on all the services they suppose to have.
Hope it helps.
Alas not... I've activated all the function of my BT hHeadset ie. high quality stereo output and HF. The first function works great, the second one is still dead :-(((

I had tried many roms but still have problem with BT headset. Please help???

First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?

Bluetooth stereo headset that rings

Hi there.
I need a bluetooth headset with LCD display (for call info) that rings on incoming calls not only on the earpiece but also "externally"; I often have my P3300 on the craddle while being working in another room, so I'm not wearing the earpiece.
Of course, if I'm going to buy a new headset, I thought of going "stereo".
I took a look at a few makers (Motorola, Sonyericsson) but none states clearly if the headset rings.
Anyone has suggestions?
Thanks.
You should be able to accomplish this with any headset. If you set Speaker DWORD at
HKCU\ControlPanel\SoundCategories\Ring0 to 1 it should play out the speaker instead of the paired BT headset.
You can also look at using JETWare BT Extension which will add a lot of functionality to the MS BT stack.
h4waii said:
You should be able to accomplish this with any headset. If you set Speaker DWORD at
HKCU\ControlPanel\SoundCategories\Ring0 to 1 it should play out the speaker instead of the paired BT headset.
Click to expand...
Click to collapse
He's looking to actually have the BT headset itself ring as opposed to the phone, since he may be in a different room.
To the OP: I don't know of any BT headsets that support loud external ringing, as I would suppose that could be damaging to you ears if you happened to be wearing the headset at the time. However, some BT headsets can vibrate, so I would look into those. Alternatively, if you don't mind their aesthetics, you could look into a bluetooth info accessory, such as a watch or bracelet. Those act as a middle man btwn the phone and headset, and alert you of incoming calls.
sonus said:
However, some BT headsets can vibrate, so I would look into those.
Click to expand...
Click to collapse
Not to hijack this thread, but can you point me in the direction of a a2dp device that vibrates? I have been looking for ages.
To the OP: the i-tech clip d-radio could be what you are looking for.
the Jabra BT8010 is very close...it vibrates instead of rings, though, and has an LCD display that will show caller info.
The catch is you have to download the software separately, and manually input the entries into the headset itself, and it can only hold 30 entries.
Anything not in the headset's address book will just display as the number, not the name of the person calling.
http://www.jabra.com/bt8010
Thabks all for the excellent suggestions.
I-tech Clip-D looks like the ideal candidate!
i'm using the itech r35 headset which emits 2 beeps when a call comes through. if you want it on silent mode, there's a setting that mutes the buzzer and the light flashes 2 times instead. it's also a2dp so i simply remove the single ear jack and plug in the stereo cans i have
cheers

Categories

Resources