So, for all of you guys down here that are Debian junkies, then you're gonna love this. I managed to get Ubuntu Karmic Koala on my G2 after a bit of messing around with adb. This is my first tutorial on xda-developers, so please tell me how I'm doing. Remember to hit the Thanks button at the bottom if you're satisfied
Code:
#Your warranty has been voided
#I am not the cause of any damage done to your device
#Should you accuse me, I will laugh at you
Reasons why you should follow this tutorial:
- It allows you to make use wide array of applications available in Debian/Ubuntu's repos.
- It doesn't overwrite the current Android operating system.
- It'll allow you to turn your G2, Desire Z, etc. into more than just a sub-par cellphone.
- If you're developing software/applications, this will give you the proper environment for you test them on, if you don't care for Virtualbox or don't have access to a computer at the current moment.
- This tutorial will make the best use of Android and Linux's open-source nature.
Please note that this DOES NOT replace Android nor is it a port of Ubuntu/Debian. Ubuntu/Debian support ARM EABI which is the underlying architecture of Android.
READ EVERYTHING BEFORE DOING ANYTHING. I KNOW IT'S LONG, I WROTE THIS TUTORIAL
For those of you that can't use, can't set it up, or don't care for adb, you can still get Ubuntu to work on your device using a Terminal Emulator app, but you're probably gonna be stuck at the command line. I haven't actually tried setting up the GUI using the Terminal, so I'm not 100% sure. Now, before I start the tutorial, you NEED to be rooted.
NOTE: Whenever you see a $ or a # sign, those are indicators for the next command. Please do not enter them as you're typing in the commands. The same goes for the "[email protected]:/#" sign.
Before we begin we will need the following:
On your phone, have the following installed and/or readily available
-androidVNC application
-Terminal Emulator app (use this to boot into Ubuntu shell)
-Busybox (preferably, the latest one. If you rooted your phone using the method on the xda wiki OR your custom ROM has it pre-installed, then continue)
- At least 2GB space free on your microSD card
- Loopdevice support for your ROM. I think Cyanogen and another kernel should do the trick.
On your computer have the following installed and/or on the desktop:
-Ubuntu Karmic Koala image. If you don't have it, download it from this link ->http://bit.ly/moghJ3
-adb installed and fully functioning on your computer
EDIT 4 June, 2011: For those of you having troubles getting the shell to boot up, I found an alternative bootubuntu file. Extract it and replace the one that comes with the image with this one http://bit.ly/j7zORF
Let's begin, shall we?
Step 1: Connect your phone to your computer. Make sure you have "USB Debugging" checked off in "Settings -> Applications -> Development", then mount your sd card.
Step 2: Transfer the extracted "ubuntu" folder to the root of your sd card [NOT IN ANY FOLDERS, JUST the sd card itself, for those of you who don't know]. It might take a few minutes, so you might wanna make yourself a little snack for the wait.
Step 3: When the file transfer is done, disable the USB connection, so we can make use of adb. This is where USB Debugging is CRUCIAL. Open up a command window/terminal, go to where adb is located and enter the following commands:
Code:
$ adb shell
$ cd /sdcard/ubuntu
# su
# sh ./ubuntu.sh
# bootubuntu
At this point, you've set up the Ubuntu shell, as indicated by the "[email protected]:/#" sign.
However, our shell is still incomplete. We're gonna need a GUI for actual usage. If you're fine with using the command line then stop here. If you want to give yourself a PC-like experience, then please continue. You might wanna connect to WiFi if you're in an area where your mobile data is inconsistent or restricted to an EDGE connection.
Step 4: With the command prompt/terminal window that contains your adb/ubuntu shell, let's continue entering some commands to get our GUI set up.
Code:
[email protected]:/# apt-get update
[email protected]:/# apt-get install tightvncserver
[email protected]:/# apt-get install lxde
[email protected]:/# export USER=root
[email protected]:/# vncserver -geometry 1024x800
After entering the last command, you'll be prompted to enter a password. It'll ask you to set up a second one, just press "n" then continue.
For the second and third commands, press "y" when prompted to then hit ENTER, so you can install the packages. The reason why we set the VNC server's resolution is because even though the G2/Dz's resolution is 800x480, a higher resolution will provide a better viewing experience. If you want it set up to your phone's resolution, then swap it with "800x480" to scale the server's resolution to your phone's screen size.
Step 5: Enter the following commands. After entering the first command, you'll notice there's no user indicator at the left side. DON'T PANIC. Just continue entering the following commands:
Code:
[email protected]:# cat > /root/.vnc/xstartup
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
icewm &
lxsession
Then, press Ctrl+D twice and press enter. You'll be back at "[email protected]:/#" (Conversely, if you're on Mac OS or Linux, just press Ctrl+D once)
Step 6: Go to your phone, and open up the androidVNC app. We're gonna need this to view our desktop. set the nickname to "root" and enter the password you set earlier. Set the port to "5901" and press connect.
Step 7a: And bam! You've got your own cool GNOME desktop! (Though in my experience, it switches over to lxde after a few uses.) Now, we need to get the VNC app to open up every time we boot into our shell. We need to enter a few more commands (yeah I know, it's getting a bit tedious at this point.)
Code:
[email protected]:/# cat > front
export USER=root
cd /
rm -r -f tmp
mkdir tmp
cd /
vncserver -geometry 1024×800
Again, you can replace "1024x800" with any screen resolution you desire.
Step 7b: Enter just a few more commands [trust me, we're almost done ]
Code:
[email protected]:/# cat front /root/.bashrc > temp
[email protected]:/# cp temp /root/.bashrc
Step 8: To check that everything is working, enter the following commands in your command prompt/terminal window that contains our adb/ubuntu shell that I hope you kept open all this time.
Code:
[email protected]:/# exit
# bootubuntu
And you're done! Give yourself a round of applause and a pat on the back, because now you have Ubuntu Linux running alongside Android. Yay!!!!!!
To boot into your shell AFTER you're done, use the Terminal Emulator app to access your shell:
Code:
$ su
# bootubuntu
That's it, you're finished.
Now, I don't know why this happens, but after rebooting your phone, it'll take a few extra seconds for your devices to start up. I think it's because of all the files that are in the phone's internal memory. I'm not sure. Also, the VNC server might not open up after you're done with the tutorial. It's only a minor setback, you can still manually open it yourself which is in itself relatively quick.
When you're done with the tutorial, be sure to type in "exit" in the terminal and press enter for a clean kill of Ubuntu. Otherwise, you're gonna have to redo the entire procedure.
If you have any questions, please email me at [email protected]
FAQ
- I don't have adb, can I still follow this tutorial?
A: Yes you can. However, you're probably going to be stuck at Step 3 with the command line. You can still use the shell, but you won't have a GUI.
- Why does my phone show a black screen after rebooting?
A: It's probably because of all the modding that's a result of the commands we entered.
Don't worry, Your phone will boot up normally. However, if this goes on longer than usual, you might have to install a different ROM. I've tested it on CM7 (Stable and Nightly), Stock G2 ROM, Virtuous 1.0.2, Virtuous G-Lite 1.0.2, and their respective ROM bases with no problems.
- I get an error that won't let me boot into the Ubuntu shell. Help me!!!!!
A: Yeah, you probably either downloaded an incomplete image OR you entered an important command wrong. I suggest deleting the ubuntu image from your sdcard and then copy the image you extracted onto your sdcard. Then what you have to do is redo the entire tutorial.
Interesting...
Sent from my T-Mobile G2 using XDA Premium App
Spastic909 said:
Interesting...
Sent from my T-Mobile G2 using XDA Premium App
Click to expand...
Click to collapse
What's interesting about this?
Edit: can't wait to try this!
Ouch. . .
It's my first tutorial. . .
I just want to know what he found interesting about this tutorial. No need to get so defensive over a comment some other guy made.
Sent from my T-Mobile G2 using XDA Premium App
Didn't mean any offense dude especially if you weren't trying to be rude. You know how the internet doesn't portray emotion very well in text. Just sounded snappy. Back on topic. Can't wait to try this!
Sent from my HTC Vision using XDA Premium App
I'm not much of a software junky, so what exactly would this do? It looks easy enough to accomplish, since most of it is done through terminal, but I kinda wanna know what this DOES xD
Sent from my HTC Vision using XDA Premium App
xsteven77x said:
Didn't mean any offense dude especially if you weren't trying to be rude. You know how the internet doesn't portray emotion very well in text. Just sounded snappy. Back on topic. Can't wait to try this!
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Edit: Remember to hit that thanks button!
ohshootrawr said:
I'm not much of a software junky, so what exactly would this do? It looks easy enough to accomplish, since most of it is done through terminal, but I kinda wanna know what this DOES xD
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Well, Ubuntu is a distribution of the Debian family of Linux.
Essentially, you have access to the plethora of apps that exist in Ubuntu/Debian's repos, and it's also possible to use this shell as a test monkey for applications that you might be developing.
Any idea if this will work with the new Ubuntu 11.04? Though I do hate the new layout
boost3d23 said:
Any idea if this will work with the new Ubuntu 11.04? Though I do hate the new layout
Click to expand...
Click to collapse
in theory, yes if the image has been compiled properly. also, the new layout technically can get overwritten with lxde or whatever desktop environment you installed.
reserved for future use.
im getting some errors in terminal when trying to set this up, im running mexdroid v3 android 2.3.4
C:\push\tools>adb shell
# cd /sdcard/ubuntu
cd /sdcard/ubuntu
# su
su
# sh ./ubuntu.sh
sh ./ubuntu.sh
modprobe: module 'ext2' not found
←[H←[Jmkdir: can't create directory '/data/local/mnt': File exists
←[H←[Jchmod: bootubuntu: Operation not permitted
chmod: fsrw: Operation not permitted
chmod: mountonly: Operation not permitted
chmod: ubuntu.img: Operation not permitted
chmod: ubuntu.sh: Operation not permitted
chmod: unionfs: Operation not permitted
←[H←[J
Ubuntu Chroot Bootloader v0.1
Ubuntu Bootloader is now installed!
This process does NOT damage Android OS!
Original Installer by Charan Singh
Modified for Ubuntu Chroot by Max Lee at AndroLinux.com ,G2Hacks.com and NexusOn
eHacks.net
To enter the Ubuntu Linux console just type 'bootubuntu'
# bootubuntu
bootubuntu
mknod: /dev/loop1: File exists
losetup: /dev/block/loop1: No such file or directory
mount: mounting /dev/block/loop1 on /data/local/ubuntu failed: Device or resourc
e busy
mount: mounting devpts on /data/local/ubuntu/dev/pts failed: No such file or dir
ectory
mount: mounting proc on /data/local/ubuntu/proc failed: No such file or director
y
mount: mounting sysfs on /data/local/ubuntu/sys failed: No such file or director
y
net.ipv4.ip_forward = 1
Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
Setting localhost on /etc/hosts
bootubuntu: cannot create /data/local/ubuntu/etc/hosts: directory nonexistent
READY TO ROCK AND ROLL BABY!
Brought to you by NexusOneHacks.net and the open source community!
chroot: can't execute '/bin/bash': No such file or directory
Shutting down Ubuntu
umount: can't umount /data/local/ubuntu/dev/pts: No such file or directory
umount: can't umount /data/local/ubuntu/proc: No such file or directory
umount: can't umount /data/local/ubuntu/sys: No such file or directory
umount: can't umount /data/local/ubuntu: Invalid argument
losetup: /dev/block/loop1: Device or resource busy
# bootubuntu
bootubuntu
mknod: /dev/loop1: File exists
losetup: /dev/block/loop1: No such file or directory
mount: mounting /dev/block/loop1 on /data/local/ubuntu failed: Device or resourc
e busy
mount: mounting devpts on /data/local/ubuntu/dev/pts failed: No such file or dir
ectory
mount: mounting proc on /data/local/ubuntu/proc failed: No such file or director
y
mount: mounting sysfs on /data/local/ubuntu/sys failed: No such file or director
y
net.ipv4.ip_forward = 1
Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
Setting localhost on /etc/hosts
bootubuntu: cannot create /data/local/ubuntu/etc/hosts: directory nonexistent
READY TO ROCK AND ROLL BABY!
Brought to you by NexusOneHacks.net and the open source community!
chroot: can't execute '/bin/bash': No such file or directory
Shutting down Ubuntu
umount: can't umount /data/local/ubuntu/dev/pts: No such file or directory
umount: can't umount /data/local/ubuntu/proc: No such file or directory
umount: can't umount /data/local/ubuntu/sys: No such file or directory
umount: can't umount /data/local/ubuntu: Invalid argument
losetup: /dev/block/loop1: Device or resource busy
#
teh5abiking said:
Well, Ubuntu is a distribution of the Debian family of Linux.
Essentially, you have access to the plethora of apps that exist in Ubuntu/Debian's repos, and it's also possible to use this shell as a test monkey for applications that you might be developing.
Click to expand...
Click to collapse
Seriously? Mmm, okay. I'm gonna try it sometime this week ;D
Sent from my HTC Vision using XDA Premium App
strker45 said:
im getting some errors in terminal when trying to set this up, im running mexdroid v3 android 2.3.4
C:\push\tools>adb shell
# cd /sdcard/ubuntu
cd /sdcard/ubuntu
# su
su
# sh ./ubuntu.sh
sh ./ubuntu.sh
modprobe: module 'ext2' not found
←[H←[Jmkdir: can't create directory '/data/local/mnt': File exists
←[H←[Jchmod: bootubuntu: Operation not permitted
chmod: fsrw: Operation not permitted
chmod: mountonly: Operation not permitted
chmod: ubuntu.img: Operation not permitted
chmod: ubuntu.sh: Operation not permitted
chmod: unionfs: Operation not permitted
←[H←[J
Ubuntu Chroot Bootloader v0.1
Ubuntu Bootloader is now installed!
This process does NOT damage Android OS!
Original Installer by Charan Singh
Modified for Ubuntu Chroot by Max Lee at AndroLinux.com ,G2Hacks.com and NexusOn
eHacks.net
To enter the Ubuntu Linux console just type 'bootubuntu'
# bootubuntu
bootubuntu
mknod: /dev/loop1: File exists
losetup: /dev/block/loop1: No such file or directory
mount: mounting /dev/block/loop1 on /data/local/ubuntu failed: Device or resourc
e busy
mount: mounting devpts on /data/local/ubuntu/dev/pts failed: No such file or dir
ectory
mount: mounting proc on /data/local/ubuntu/proc failed: No such file or director
y
mount: mounting sysfs on /data/local/ubuntu/sys failed: No such file or director
y
net.ipv4.ip_forward = 1
Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
Setting localhost on /etc/hosts
bootubuntu: cannot create /data/local/ubuntu/etc/hosts: directory nonexistent
READY TO ROCK AND ROLL BABY!
Brought to you by NexusOneHacks.net and the open source community!
chroot: can't execute '/bin/bash': No such file or directory
Shutting down Ubuntu
umount: can't umount /data/local/ubuntu/dev/pts: No such file or directory
umount: can't umount /data/local/ubuntu/proc: No such file or directory
umount: can't umount /data/local/ubuntu/sys: No such file or directory
umount: can't umount /data/local/ubuntu: Invalid argument
losetup: /dev/block/loop1: Device or resource busy
# bootubuntu
bootubuntu
mknod: /dev/loop1: File exists
losetup: /dev/block/loop1: No such file or directory
mount: mounting /dev/block/loop1 on /data/local/ubuntu failed: Device or resourc
e busy
mount: mounting devpts on /data/local/ubuntu/dev/pts failed: No such file or dir
ectory
mount: mounting proc on /data/local/ubuntu/proc failed: No such file or director
y
mount: mounting sysfs on /data/local/ubuntu/sys failed: No such file or director
y
net.ipv4.ip_forward = 1
Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
bootubuntu: cannot create /data/local/ubuntu/etc/resolv.conf: directory nonexist
ent
Setting localhost on /etc/hosts
bootubuntu: cannot create /data/local/ubuntu/etc/hosts: directory nonexistent
READY TO ROCK AND ROLL BABY!
Brought to you by NexusOneHacks.net and the open source community!
chroot: can't execute '/bin/bash': No such file or directory
Shutting down Ubuntu
umount: can't umount /data/local/ubuntu/dev/pts: No such file or directory
umount: can't umount /data/local/ubuntu/proc: No such file or directory
umount: can't umount /data/local/ubuntu/sys: No such file or directory
umount: can't umount /data/local/ubuntu: Invalid argument
losetup: /dev/block/loop1: Device or resource busy
#
Click to expand...
Click to collapse
I had this issue aswell.
To solve it firts fix your permissions in Rom manager.
Then install busy box.
This should then allow you to install ubuntu. (atleast it did with me)
Hope this is some help to you
teh5abiking said:
What's interesting about this?
Click to expand...
Click to collapse
The post dude.. would you rather I said boring? Settle down
Do u know what interesting means? It means I am interested in this..didn't think you could mistake that but guess I was wrong
Sent from my T-Mobile G2 using XDA Premium App
Spastic909 said:
The post dude.. would you rather I said boring? Settle down
Do u know what interesting means? It means I am interested in this..didn't think you could mistake that but guess I was wrong
Sent from my T-Mobile G2 using XDA Premium App
Click to expand...
Click to collapse
hey man, i just wanna know what you found interesting about the tutorial.
i wasn't trying to be3 a smart aleck.
I really don't know **** about linux except for the few times I've had to run it on a virtual machine for rooting certain phones or to check out a few programs. With linux installed on my phone,
does that mean that I would be able to run any linux based program? For example aircrack or something like it?
Edit: I basically want to know what the purpose of doing this would be. What it would enable me to do
* I'm just sayin......
gazlufc said:
I had this issue aswell.
To solve it firts fix your permissions in Rom manager.
Then install busy box.
This should then allow you to install ubuntu. (atleast it did with me)
Hope this is some help to you
Click to expand...
Click to collapse
installed newest version of busybox 1.19.0 and fixed permissions and still received the same errors :/
strker45 said:
installed newest version of busybox 1.19.0 and fixed permissions and still received the same errors :/
Click to expand...
Click to collapse
.
Create a backup of you current rom using Rom manager.
Then install a new rom from the developer section of the G2/Desire z
First install busybox.
Second fix permissions.
Third is reboot
open adb and now try the process this should now allow you to install ubuntu.
Hello world,
i'm trying to install backtrack 5 on my Galaxy Nexus. I downloaded the backtrack 5 arm version, copied all files in /sdcard/BT5 and then got this:
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
[email protected]:/ # cd sdcard
[email protected]:/sdcard # cd BT5
[email protected]:/sdcard/BT5 # sh bootbt
Loop device exists
ioctl LOOP_SET_FD failed: Device or resource busy
mount: No such file or directory
mount: No such file or directory
mount: No such file or directory
net.ipv4.ip_forward = 1
bootbt[23]: can't create /data/local/mnt/etc/resolv.conf: No such file or directory
bootbt[24]: can't create /data/local/mnt/etc/hosts: No such file or directory
chroot: can't execute '/bin/bash': No such file or directory
Shutting down BackTrack ARM For Xoom
failed: No such file or directory
failed: No such file or directory
failed: No such file or directory
failed: Invalid argument
1|[email protected]:/sdcard/BT5 #
I'm running android 4.1.1 stock rom with root and franco.kernel milestone 5 3.0.41 (the last stable)
What can i do? Thanks for help
Is it This guide you followed?
Herman76 said:
Is it This guide you followed?
Click to expand...
Click to collapse
No i followed a video from youtube. And others. But i simply download the backtrack arm version here: http://www.backtrack-linux.org/ then copied all the files and running with "sh bootby".
However i install cyanogen mod 10 and now it works for a bit. Now, after reinstalling all apps and use the phone a bit, i get again the loop devices error.
Why?
FOR MORE DRIVERS JUST PLACE A COMMENT WITH YOUR WIFI ADAPTER CHIPSET AND DRIVER NAME
I have compiled wifi drivers for my honor 6x
I have posted those in download section
Installation process
1.extract the modules folder to internal storage
2.open nethunter app
3.go to custom commands
4.click on add command
5.select SEND TO as ANDROID
6.In COMMAND box type
cd /sdcard/modules
sh install.sh
7.click on ok
8.click on run
Now you will have your drivers installed
NOTE:-on every reboot you should go to nethunter app and click on run
insmod not work for your rtl-wifi drivers
<pre>HWBLN-H:/sdcard/modules $ su
HWBLN-H:/storage/emulated/0/modules # ls
install.sh mac80211.ko rtl8192c-common.ko rtl8192cu.ko rtlwifi.ko
nsmod mac80211.ko <
insmod: failed to load mac80211.ko: Exec format error
at install.sh <
#!/bin/bash
su
cd /sdcard/modules
insmod mac80211.ko
insmod rtlwifi.ko
insmod rtl8192c-common.ko
insmod rtl8192cu.ko HWBLN-H:/storage/emulated/0/modules # insmod rtlwifi.ko
insmod: failed to load rtlwifi.ko: Exec format error
1|HWBLN-H:/storage/emulated/0/modules # </pre>
Could you share how you build your drivers?
What is this for? Brute force?
try to study something
for me, I try to study something from my phone.
That's it.
Is this going to work on another devices?