radio downgrade? - Touch CDMA Windows Mobile ROM Development

have installed nsfan latest sprint w/ 3.42.50
how do i downgrade only radio to 3.42.30
sprint radio is better for internet
is there stand alone radio3.42.30 file for vogue

jagat said:
have installed nsfan latest sprint w/ 3.42.50
how do i downgrade only radio to 3.42.30
sprint radio is better for internet
is there stand alone radio3.42.30 file for vogue
Click to expand...
Click to collapse
Your going to have to install the stock sprint rom then reflash to the NFSFAN rom

If the ROM requires .50 then you'll have to use that. Just check before you do it.

Related

possible radio issue?

On occasion when I try to make a call...it will just say dialing but will never connect. so I hit END and try to dial again. A pop up window opens and says Phone application failed. Then I have to reset in order for me to make a call. would this be fixed by upgrading to a different radio version?
im running WM6 Vanilla on my TyTN, on Cingular/at&t.
Radio Version 1.03.03.10
thanks in advance.
you sure you wrote the correct radio version down????
yes that's what my TyTN tells me is my radio version...
cpcrazyfly said:
yes that's what my TyTN tells me is my radio version...
Click to expand...
Click to collapse
You definitely should update your radio ROM to a newer version!
Cheers
tadzio
im only familiar with doing ROM updates. can I update just the Radio without going thru the hoopla needed when doing a ROM update?
and is there a certain radio I should upgrade to?
yes...read the wiki
i upgraded to latest Radio via the WIKI. now i have a "U" where i do not have 3G, i wont be at work til tomm, but im assuming it wont have my nice 3G? why did this change?
On my TyTN, WM6 Vanilla
ROM Version: 3.22.110.1
ROM Date: 01/04/07
Radio Version 1.41.00.10
Protocol version: 32.74.7020.18H
like i said i just upgraded to the 1.41.00.10 Radio, and now when i am in a non 3G area, instead of a "G" at top, i have a "U", with a little "E" when connected to data. i wont be in a 3G area until tommorow sometime to see what it says then.
ive installed the shogun_nice3G to get the G and 3G icons back how i liked them, but it still says U when im not in a UMTS/3G area...
any suggestions?

Improvement Advices please!

I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
HTCzar said:
I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
Click to expand...
Click to collapse
My personal opinion..do not play with IPL/SPL unless its a die situation...try upgrading radio, i find that some radios are better than others in my device...
Learn how to cook and be a flash junkie...LOL
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Yeah, a better Radio will improve your signal, and also save on battery life. 1.54 is the latest and seems to work well for everyone else i know
Check the hermes wiki links above and you can download it there.
HTCzar said:
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Click to expand...
Click to collapse
Who is your provider?
My stock AT&T radio (1.40) worked good, but i prefer to use higher versions just in case...I dont have any problems with the current one that i am using right now (see signature)
Portugal TMN
I´ve seen those Rom´s for audio upgrade and have researched on how to install them, I think I can make it with sucess. However, I want your opinion on upgrading SPL before the audio update please
"need bootloader version 1.04 to upgrade your radio and ?RadioBootloader version 107 or less"
in http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
How can I check this?
I´ve update the SPL to the 2.10 Olipro and the Radio to the latest version.
However, I can´t make 3G calls, any ideias? It wasn´t working before the update either.
radio o depends on ur provider a lot.
i use 1.43 for australia. 1.54 is ltest but it sux in australia.
so get feedback from those in a similar region. 1.16 is gonna be stuffed either way, there r much better versions.
i also use htc released rom for phone os.
Well, I´ve installed the latest radio and now I´m back with the NO GSM message.
i wonder ir this is a problem with my installation, with the radio rom files, or with my PDA?
Any help please
it means u screwed it up n didnt follow instructions, and probably didnt read wiki.
get a new radio version, or do it again n reflash it.
ensure u have the right ipl/spl version n u understand the risks n bricking when u r upgrading radios.
i have completely wiped my device n bricked it doing radios. so re flash a rom of choice, reflash radios and alllow lots of hours redoing it all.
suggest u try just reflash a radio that works for ur region. be prepared to lose everything n hope u have backed it up before u starrted.
I didn´t bricked. I bought it bricked.
I´have been trying for the past week to recover it from a brick. I´ve read every tutorial in this forum, and didn´t screw up.
However, I haven´t yet found a Radio Rom that work´s stable in this MDA in Portugal TMN.
I´ve tried 1.16.00, 1.38, 1.40, 1.57 (both). When with 1.16 it worked for 2 days in a row, however after that the no gms appears once in a while.

Flashing?

Can a Verizon Touch that has been flashed to Cricket have it WM6 ROM updated to WM6.5 without loosing the Cricket software? Or should it be updated befor flashing to Cricket? Thanks for understaning
If you flash to a Cricket 6.5 rom than you won't lose the software, if you flash to a general 6.5 rom or another carrier rom (e.g. Sprint) than you will not have the Cricket software.

CDMA Bell HTC Touch Diamond Radio Rom Needed Please!!

I am trying to relock my Diamond and it is failing. I am going to assume that it is because I am using the Telus radio Rom. Does any one have or can anyone provide me with a current radio rom for my version of the phone so that I can lock it. I am interested in Bell HTC Touch Diamond radio rom.
I have looked everywhere for the stock software that would include the radio for my phone and I can't find anything. Currently I am using the Stock Rom Version 1.13.666.7 but it does not include the radio.
Help!

Sprint vogue radio/bootloader question

Ok I have a sprint vogue here's the info:
bootloader spl-0.36.0000
ROM 1.12.651.1
Radio 2.13.0
I have done many flash's on HTC but I've never had one with this combo. My goal is to get a gps rom and windows 6.1 on it.. it will eventually be a cricket 6.1.
Tell me if im wrong i really dont wish to brick this phone.
1. .41 unlocker
2. Upgrade the radio.. which i can't find a radio can someone give me a link? And these titan radio's do they work? OR would it be easier to get a stock sprint rom with a 3.xx radio and upgrade that way.. if so can someone point me towards that download.
3. use the 2.31 unlocker????
4. Install the 6.1 rom
Thanks for any help bros
Ok i found the sprint rom new info
Bootloader
SPL-2.01.0000
CPLD-3
Rom: 3.03.651.4
Radio: 3.42.30
Now i use the 2.31 unlocker correct ? And i can flash any gps rom.. i.e cricket
Because i keep reading its only for alltel ? is this correct ? Or is it safe on my current configuration ?

Categories

Resources