hi to all!!!
Guys please help me!!!
my microphone is dead!!!
I have given on the workshop, but in our country our masters sooo bad knowing
and now I want to change the microphone myself or I.
I searched in the internet, there is no results & no manuals.
on this, I wish to seek the assistance from you.
and yet I have to redo the battery.
Well if you were a somebody enough manuals
Thank you all for your attention!
Sincerely Nurkamol Vakhidov.
i felt sorry to hear about your hermes. i hope someone in here can really help you
nurkamol said:
hi to all!!!
Guys please help me!!!
my microphone is dead!!!
I have given on the workshop, but in our country our masters sooo bad knowing
and now I want to change the microphone myself or I.
I searched in the internet, there is no results & no manuals.
on this, I wish to seek the assistance from you.
and yet I have to redo the battery.
Well if you were a somebody enough manuals
Thank you all for your attention!
Sincerely Nurkamol Vakhidov.
Click to expand...
Click to collapse
OKAY, HERE IS THE HELPFUL LINK ON OUR HERMES
http://www.mikechannon.net/page1.html
the only thing you might need is the microphone. but where to get it in your country i don't know. you can try the microphone of some old broken phone (this one you can get from your friends in some dervice center).
you can try pdacenter.ru or ebay.com
hope this can help you someway.
Go to Mike's Channon page, download service manual and dismantle your hermes.
Getting to the mic is really easy, you will end the proccess in the few first steps, the most problematic ones won't be neccessary
Don't be afraid, it's not so hard. Just make sure you have a good soldering tool, and remember not to overheating the board.
Good luck!
Have a look in Hermes Service manual. You should find everything you need.
http://wiki.xda-developers.com/index.php?pagename=HTC_Service_Manual
Regards
you d better use the pages utak3r and I gave you (the same ones)
there you can find not only servicee manuals, but video on dissaaamling device.
you will also need t6 screwdriver and plastic spatula (the metal can break off pieces of paint as it happened to mine).
but if you want to give a new look to your Hermes I can give you some links on painting HTC devices - comes out reaaly cool))
i love U Guys & Masters!
Thanx BiG for Reply, Big thanx to Our CooKer & Developer utak3r & my russian friend - _Prezident_
i will be try this methods tonight.
Respect 2 U my XDA Familiy
_PREZIDENT_ said:
you d better use the pages utak3r and I gave you (the same ones)
there you can find not only servicee manuals, but video on dissaaamling device.
you will also need t6 screwdriver and plastic spatula (the metal can break off pieces of paint as it happened to mine).
but if you want to give a new look to your Hermes I can give you some links on painting HTC devices - comes out reaaly cool))
Click to expand...
Click to collapse
Service manual gives all reference of each HERMES components and explanations with pictures on how to dismantle each component.
Now, indeed you have to choose...
PhilippeF said:
Service manual gives all reference of each HERMES components and explanations with pictures on how to dismantle each component.
Now, indeed you have to choose...
Click to expand...
Click to collapse
didnt mean to offence you, just pointed our friend to watch video alo - I think it's more showable and gives an ooportunity to see how it looks like))
hi 2 all again!!!
i'm looked Mike's Channon page, but there only have Hermes Fuse Location.pdf & Hermes Service Manual _A03_[2].pdf (in this PDF files don't have Microphone FiX how to )
and i founded all master tools, soldering tools toooo
I just don't want BAD confusion , or something to do with motherboard!!!
please help, have another way to change my microphone manually by me
Just use this service manual to dismantle your mainboard from the rest (no need for further dismantling). The mic is located at the bottom of the board, covered with a small piece of gum - just replace it... I doubt you can find an exact instruction of how to do it - just unsolder the old one and solder the new one
utak3r said:
Just use this service manual to dismantle your mainboard from the rest (no need for further dismantling). The mic is located at the bottom of the board, covered with a small piece of gum - just replace it... I doubt you can find an exact instruction of how to do it - just unsolder the old one and solder the new one
Click to expand...
Click to collapse
ok utak3r (Piotr) Bro, i will be try your method.
anyway thanks again & again for HELP
_PREZIDENT_ said:
didnt mean to offence you, just pointed our friend to watch video alo - I think it's more showable and gives an ooportunity to see how it looks like))
Click to expand...
Click to collapse
No issue...
...and how is it?
utak3r said:
...and how is it?
Click to expand...
Click to collapse
hi utak3r! how are you?
today i'm try solder new microphone with my Master friend, yesterday his both me new microphone
hi my XDA family!
I'm back againg - problem with microphone!
i'm tryed yesterday and today - soldered new microphone.
tryed mics from SE K750i and Motorola L7, but nothing happened & helped. I recorded any sound from mic - bu Silence!
Please can u you guys help me again! Me neeD only - how i can manually REDO microphone from other Devices or Mobile Phones. Just Hermes mics soo hard to know how to.
Thanx again 2 All.
Nurkamol Vahidov.
___&latest_-_/sorry/4/my//eng___
hi guys, if it's prohibited please ignore me & moderator please kindly remove my post
1st of all I'm from malaysia
I have a very good condition (& working of course) Atom Exec mainboard, with the camera module & ear speaker module attached, it's running default OS which is WM5, how much is this worth? I salvaged it from, well.. my unit, I cracked the whole screen, LCD + touchscreen... = ( I will ship internationally with my local registered postage, payment through paypal, will be uploading some pictures if there's good response & attractive offers, thanks
Yes you can,
Just use marketplace section for it
orb3000 said:
Yes you can,
Just use marketplace section for it
Click to expand...
Click to collapse
oh I overlooked that, thanks mate
interested party please head over to:
http://forum.xda-developers.com/newthread.php?do=newthread&f=476
thanks ^_^
XDA Atom Spare parts
Hello I am interested, can you please communicate with me on my personal email: [email protected] using the same title above
Hi Friends,
I have been using i-mate JAMA for last few years and I am very much addicted in using it and experimenting lot of stuff that goes over this forum.
I had upgraded to WM6.1 and now, my phone has got minor damages on the panel. As I can not afford a new mobile (being jobless for a while), I am thinking to source a faceplate for the same and replace it?
I had searched for the same through google, but could not find much help.
I request you all the esteemed members throw some light on where to get the compatible faceplate for my i-mate JAMA?
Appreciate your valuable inputs.
regards,
pk
I have not got any reply to my above request.
I am searching in google and just wanted to check whether any of the below phone's faceplate fits for i-mate JAMA?
1. Dopod 818
friends, someone can please help me here?
tech4pk said:
friends, someone can please help me here?
Click to expand...
Click to collapse
PLs close this thrread...i helped the op
Hi all together,
I wanted to ask and know whether you can remodel it and as with the Lapdock of Atrix on Razr!
The link for the reconstruction of Lapdock:
http://forum.xda-developers.com/showthread.php?t=1223032
If so, it would be Nice if someone could send me the link, how can I open the station!
Thanks for your help!
PS: Sorry for my English. Unfortunately I'm not so good at it
Hi all,
First time posting here. I need your expertise and help! I am looking for an Android head unit for my Mini Cooper 2012. I had found the Teyes CC3 but their support said that the Mini product they have (this one: https://www.aliexpress.com/item/1005001666526066.html) is not compatible with a right-hand drive...
I really like the CC3 but if it doesn’t connect to my right-hand-drive car then I can’t order it. Can you guys suggest a solution or a better alternative that will work with my car?
I have attached a photo of my dash, if that helps. Thanks, everyone!
- Chris