flash to hardspl - Touch Diamond, MDA Compact IV ROM Development

Guys im trying to flash my diamond but i tried everything i mean everyting oliv even the other too allow it to take custom rom but stucks at 0% any1 can help?

http://forum.xda-developers.com/showthread.php?t=409425

0%
I already tried all the following methods. still no luck. i dont know why of course. might my diamond is the only one that cannot accept hardspl?

wizzo65 said:
I already tried all the following methods. still no luck. i dont know why of course. might my diamond is the only one that cannot accept hardspl?
Click to expand...
Click to collapse
Did you check out the wiki ?
It really has all the info you need to do this properly.
I read through the flashing section & it was nice & clear & a perfect n00b like me (when it comes to mobile phones) managed to suss it out & get my device nice & hunkydory.
wiki for diamond
Upgrading / cooking / flashing:
Upgrading for beginners: first time flashing a ROM? (external link)
Upgrading FAQs: read this before asking questions!
Available Original Shipped ROM Versions
Available Extracted Radio Upgrade Only
Available Cooked ROM versions
?Diamond Upgrading Guide (4Hard/S-SPL)
Diamond Hard-SPL
Custom RUU Updater
Flash Diamond Image from Internal Storage
This hopefully will help you.

Also, give us more information about your device. for example: Is it GSM or CDMA?

Related

How to install wm6 on new trinity

Hi,
I am new here... and i would like to know all the proccess from the begining
what i need to download and how do i install it.
Thanks
Welcome, please start by reading: http://www.trinityguides.info
I have read this... but i didnt understand what is radioupgrade and what i need to do... i can just upgrade one of wm6 that in this forum from the minisd?
or that i need radio upgrade or something
And what is Hard-SPL
radio is the gsm part it have it's own software which is not included in the normal wm rom
if your gsm is working ok you dont need to upgrade
Hard-SPL ==
http://www.google.com/search?source=ig&hl=en&q=Hard-SPL&btnG=Google+Search&lr=lang_da|lang_en
gallevy said:
I have read this... but i didnt understand what is radioupgrade and what i need to do... i can just upgrade one of wm6 that in this forum from the minisd?
or that i need radio upgrade or something
And what is Hard-SPL
Click to expand...
Click to collapse
SPL - Service Providor Lock. Your phone has a SPL in place to prevent you from flashing a ROM from another providor for example. By Flashing Hard-SPL - you permanently remove the SPL check when flashing a ROM thereby allowing you to flash any ROM that is designed for your device.
You can use Soft-SPL which will prevent the check from happening when you flash on a once only basis. If you have a problem during the upgrade - the ONLY way to recover you phone is by flashing the original ROM. Therefore if you don't have the original ROM to hand - Hard-SPL is highly recommended! It allows you to flash another ROM if you have a problem during a flash - thereby recovering your device.

Flashing a cooked rom - further tips

As a number of you are having problems flashing cooked roms I put up this sticky.
1. If you presently run a factory wm5\wm6 rom then uspl cid unlock (step 1 in my roms) your rom before you flash cooked rom.
2. If you have a cooked rom on your device already and are changing to another cooked rom (especially if rom is from a different cook) i would recommend you:
a) flash back to factory rom first
b) then cid unlock
c) then flash the new cooked rom.
This is because sometimes the new cooked rom does not function 100% on first flash and a repeat flash is required.
3.Alternatively (especially if you dont have access to the factory rom) flash the new cooked rom twice to be sure new rom has taken properly and if device is already cid unlocked there is no need to cid unlock again.
Thanks for your hard work
Yes flashing twice works!!!
Thanks
Thanks Meschle
No Navigation application included in ROMs
Maybe this is also interestening for newbies;
there is no TomTom or iGo in the ROMs included (this is a often asked question)
but you can download TomTom from their website for free (you only have to pay for the maps)
After installing TomTom - just insert your TomTom CD and install your maps from there.
meschle said:
As a number of you are having problems flashing cooked roms I put up this sticky.
1. If you presently run a factory wm5\wm6 rom then uspl cid unlock (step 1 in my roms) your rom before you flash cooked rom.
2. If you have a cooked rom on your device already and are changing to another cooked rom (especially if rom is from a different cook) i would recommend you:
a) flash back to factory rom first
b) then cid unlock
c) then flash the new cooked rom.
This is because sometimes the new cooked rom does not function 100% on first flash and a repeat flash is required.
3.Alternatively (especially if you dont have access to the factory rom) flash the new cooked rom twice to be sure new rom has taken properly and if device is already cid unlocked there is no need to cid unlock again.
Click to expand...
Click to collapse
Hi guys, I'd like to try one of your cooked roms but unless I tried to gather infos from the forum I still have some doubts....
First of all... the cid unlock procedure is needed only for the devices that are operator branded right? I mean if I have a normal HTC no brand I don't need to do this step... is this correct?
And last but not least.. how can I flash back to the factory rom??? Is the procedure the same? I tried to find my original rom but I couldn't... Does anyone can help me in finding it? (I've got the italian rom installed).
Thanks to everybody...
Ciao
Shift.
Before you start to cook your own rom...
May I add that's also very important to have been through the whole process (at least one time) of recooking an original rom without adding/removing anything ?!
That's the price we need to pay in order to achieve successfull rom cooking !
difficulties to flash artemis
i have M650 (orange) wih WM4. it was unloacked by orange.
i'm not able to flash it.
i have the error 270 fconnect lost or file corruoted
how can i solve my issue?
meschle said:
As a number of you are having problems flashing cooked roms I put up this sticky.
1. If you presently run a factory wm5\wm6 rom then uspl cid unlock (step 1 in my roms) your rom before you flash cooked rom.
2. If you have a cooked rom on your device already and are changing to another cooked rom (especially if rom is from a different cook) i would recommend you:
a) flash back to factory rom first
b) then cid unlock
c) then flash the new cooked rom.
This is because sometimes the new cooked rom does not function 100% on first flash and a repeat flash is required.
3.Alternatively (especially if you dont have access to the factory rom) flash the new cooked rom twice to be sure new rom has taken properly and if device is already cid unlocked there is no need to cid unlock again.
Click to expand...
Click to collapse
unsuccess cooking flash
it is my first flashing.
i feel to have follow-up all step
connect usb cable, and go head
but it seems not working.
kulbut0r said:
May I add that's also very important to have been through the whole process (at least one time) of recooking an original rom without adding/removing anything ?!
That's the price we need to pay in order to achieve successfull rom cooking !
Click to expand...
Click to collapse
i succed to do it.
even if the m650 was unlock by the provider it is needed to do it with uspl.
tnx
Marcos Paolo said:
it is my first flashing.
i feel to have follow-up all step
connect usb cable, and go head
but it seems not working.
Click to expand...
Click to collapse
So if i whant to go from B&B4.3 Englisch version to the Dutch version, must i cid unlock my device again ? Or can i just flash from Englisch to Dutch ?
NP9660 said:
So if i whant to go from B&B4.3 Englisch version to the Dutch version, must i cid unlock my device again ? Or can i just flash from Englisch to Dutch ?
Click to expand...
Click to collapse
only flash the new one.
Just like to add that sometimes the ROM file renames itself to an N file even if you rename it back to a NBH file so watch for that before flashing cooked ROMs
using the ROM Update utility, how do I get it to choses the correct rom file. Cooked one with extended rom how do I get tit to choose this file?
XDA-BOJ said:
using the ROM Update utility, how do I get it to choses the correct rom file. Cooked one with extended rom how do I get tit to choose this file?
Click to expand...
Click to collapse
DONT CROSS POST - ESP IN A MODERATORS THREAD
Sorry... Ill take that as a slapped wrist... should had read the rules , but I am a bloke !!!!....
XDA-BOJ said:
Sorry... Ill take that as a slapped wrist... should had read the rules , but I am a bloke !!!!....
Click to expand...
Click to collapse
No problem - we are all blokes here - probably none of them read the instructions.
prank1 said:
Just like to add that sometimes the ROM file renames itself to an N file even if you rename it back to a NBH file so watch for that before flashing cooked ROMs
Click to expand...
Click to collapse
Thanks for the tip you saved me from lot of frustration.
tray to flash the rom without sd inserted
shift_runstop said:
Hi guys, I'd like to try one of your cooked roms but unless I tried to gather infos from the forum I still have some doubts....
First of all... the cid unlock procedure is needed only for the devices that are operator branded right? I mean if I have a normal HTC no brand I don't need to do this step... is this correct?
And last but not least.. how can I flash back to the factory rom??? Is the procedure the same? I tried to find my original rom but I couldn't... Does anyone can help me in finding it? (I've got the italian rom installed).
Thanks to everybody...
Ciao
Shift.
Click to expand...
Click to collapse
The above questions asked are really important for the ppl flashing their ROMs for the 1st time. I want to add some more questions
- How to put the original ROM back on the device.. (could not find the steps for the same)
- CID unlock. If i put the original ROM back on the device, will it automatically take care of the CID which was unlocked before (to flash the cooked ROMs)?
- Is there any way we can see CID info on the mobile?
arinjayw said:
The above questions asked are really important for the ppl flashing their ROMs for the 1st time. I want to add some more questions
- How to put the original ROM back on the device.. (could not find the steps for the same)
- CID unlock. If i put the original ROM back on the device, will it automatically take care of the CID which was unlocked before (to flash the cooked ROMs)?
- Is there any way we can see CID info on the mobile?
Click to expand...
Click to collapse
to put the original ROM just get it and flash it when needed
and when flashing it it don't need CID unlock or anything and it will bring back your device to original SPL, IPL, Radio and ofcourse the OS
cheers

ROMs for the Diamond from HTC

Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
NightWolf88 said:
Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
Click to expand...
Click to collapse
Try reading the rules here before posting!
Also, get familiar to using forum search and also google search.
oh no...
not someone who and use the search button
i have tried the search function!
i cannot find a concrete answer as to if htc has actually got a download page with the roms or if we need to use the rom 1.93... and this hard spl program...
fyi when searching i found many ppl asking the same qus as me yet there was no answer other than a few wasteful people saynting use the search function... if u do know the answer dont be Arrogant and say use search - the onlynthing u are doing is wasting ppls time and increasing ur post count. i asked for some help if u dont have anything useful to add dont post...
thanks
www.htc.com - E-club
It's in your phone manual as well.
Riel said:
www.htc.com - E-club
It's in your phone manual as well.
Click to expand...
Click to collapse
HTC e-club doesn't have roms for diamond - not on Hong Kong where I login anyway.
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC havent release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Also to install the 1.93 ROM posted by Tom do I need to install HardSPL on my phone..? Because it looks like that package will work with no need to install any SPL, its just an exe that runs through a wizard... What way/how does the HardSPL versions here prevent me from bricking the phone? How do I find the SPL version that is currently on my phone and can I revert back to the original SPL/remove hard CID so I dont void warranty..?
Tim what ROM are you using on your Diamond and how did you install it???
Also does the ROM posted by Tom have the Radio ROM (I think its 1.00.25.5 inc in the package guessing by the file name?) let me use Quad band network?
HTC does release the updates, but not on their site. Only to their resellers I believe.
Yes, it is essential to install hard SPL on your phone for any ROM you want to try. I am using walshieau's Elite 3.0 ROM 9 (which is very quick). This is what I did to install it:
1) Flash hard SPL signed version (which will hard reset your phone, so backup using PIM backup from pocketpcfreewares.com)
2) Flash the ROM of your choice
After this I decided to update the Radio to version .05
In order to do this I needed to first flash with UNsigned hard SPL, then flash the radio using CustomRUU. Now I have support for Telstra's NextG 850Mhz.
NightWolf88: check your PM and you can contact me by phone and I may be able to explain in more detail.
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
NightWolf88 said:
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC haven't release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Click to expand...
Click to collapse
Same problem here!
Yes, I did use the search function but didn't find what I was looking for.
That being said, I have registered my Diamond on e-Club. (It's a French Orange one, so I used a hack I found on another forum to correctly register by changing "HT825" to "HT826" in the SN.) However, I don't see anything for the diamond available for download under "Phone Software Updates" and "Other Downloads."
So my question is: does HTC offer certain downloads only to certain SN?
The answer might have been already posted somewhere; if so please redirect me (and NightWolf88) to the correct thread if you know it!
Thanks
PS: NightWolf88, check out www.modmydiamond.info if you haven't already: it's a fantastic tutorial that will most likely answer most of your questions regarding the fine art of ROM flashing and restoring.
Yeah I have checked that page, great site.
From what I have read there are no HTC e-club updates for the Diamond yet, only updates going to resellers... I also emailed HTC Tech support - I got this reply:
Thank you for choosing hTC. Please note that there's no new rom for HTC Touch Diamond at the moment. We recommend you to visit our hTC HK website for the latest information as below
Click to expand...
Click to collapse
I wish that HTC would pull there finger out and release an official ROM.
After putting an Official Rom update on the e-club site but then taking it down pretty quickly, it seems strange they haven't released one yet.
Im holding out for an Official Rom, but I think i will just give in and flash a cooked rom in the end.
Gonna try flashing the Radio first as I havent got an issue with the Rom itself, just with the signal behaving very erratically!
Will see.
Great site tho xda devs and also the modmydiamond one to, some invaluable info on both of them.
Thanks everyone on here.
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Riel said:
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Click to expand...
Click to collapse
Yeah it seems that only device SNs that shipped with <1.37 have an update, there is no offical release of 1.93 which is (from what I have read) better than 1.37, but 1.37 was alot better than the 34s and 35s if you do a search around the net alot of reviewers got sent these ROMs which fixed initial lag issues...
I want to put 1.93 on my device, wanted offical htc release but I'm just going to use the one posted here...
Any one hjelp me with the ROM update???
NightWolf88 said:
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
Click to expand...
Click to collapse

Orange HTC touch diamond ROM update

Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
I suggest your search the forum...
hello newbie
yes use the search button...it works really well
You first need to flash your diamond with one of the hard spl on this site and after you've done that you can take your pick from any of the roms on here
sorry guys i did look just didnt understand much. I am trying to use Hard SPL just cant get it to work.
same here
I have an orange htc Diamond and would really apreciate which files wouldwork. Everything I have tried stay's at Zero and ends up in an error.
Any help would be greatly ppreciated
root directory
to use hard spl i have to put a file in the root directory! but what is the root directory?
Hi James, your failing at 0% most likely because the SPL your using will not allow unsigned ROM's. Look for another SPL, one with developer edition in the title is good and works quite well for me.
I have an Orange also, the first thing to do is install the SPL then flash the radio (.05 is good) then get a new ROM!
Hope this helps
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
james soules said:
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
Click to expand...
Click to collapse
You need to do the following
1. Download the Unsigned HardSPL 1.24 from here http://forum.xda-developers.com/showthread.php?t=408621 and extract to a folder on your PC. Make sure you have Active sync installed and setup with your Diamond. Run the Updater in the 1.24 folder. Once the Phone reboots reconnect with active sync.
2. Download any of the ROMS on here and run the ROM to flash the phone.
Thats it !!!!!
Topboy
as i go to add a ROM i get a error saying the application failed to initialize properly ( 0xc0000135) click OK to terminate
Or check www.modmydiamond.info for easy to understand information
i get the above error as i try to add RUU
Hard SPL won't work
Hello,
From what I've read on the forum and also on www.modmydiamond.info, I gather I need to go through the Hard SPL step before installing any ROM.
However, after trying 2 different SPLs (hard_spl.120 and diamond_hspl_1.24) it still doesn't work.
I'm stuck at 0%.
Thanks
Read here....
As an alternative to the other threads try this one:
http://forum.xda-developers.com/showthread.php?t=416211
Its about the most comprehensive writeup I've seen to quickly and easily get your Diamond set from HardSPL to Radios to ROM's
Also read the WiKi's section at the top of the forum......
Query on Orange htc Upgrade ROM.
Hi There,
I have recently purchased a htc diamond, it was originally an Orange unit but is unblocked.The ROM version is 1.37 but I wish to flash to 1.93.I have the Orange released version of the 1.93 as htc wont support me direct.Question is, if I do this will the unit revert back to being Orange??ie.....does this flash the radio back?? or will it remained unblocked??
Thanks in advance...
james soules said:
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
Click to expand...
Click to collapse
thxthxthxthx

[Q] ROM Update stays at 0% - help needed

Dear All,
this time, I have a problem and need your help, please.
I just bought a new (used, but not by me ) HTC Touch Diamond. Hard-SPL (1.37 from whoever) was installed.
First MTTY'ed the device - with success (set 14 0, task 29, task 8)
Wanted to install OliNex 1.40 first
Started ROM-Update, everything went fine, screen of Diamond changed into "bar display" - but stays there with 0%
Tried several flashes (OliNex, ROM, Radio - everything the same)
Does anybody have a hint for me what to do? Identifier seems ok, DIAM100 is shown in intial bootloader screen (three color-screen)
I appreciate any hint.
With kind regards from Switzerland - Christoph
Radio
Downgrade your radio to one below 1.02.XXX before flashing the unlocked radio
Full instructions to unlock your diamond are here
http://forum.xda-developers.com/showthread.php?t=749201
Once you have done this, you can flash any ROM you like
Dear Dave,
thank you very much for your support.
Unfortunately it didn't help but showed everytime the same picture - stuck in the bar at 0% and doesn't do anything.
I tried STEP 1, STEP 2 and downgrading to radio 1.00.25.05 (but actually I don't know which is actually installed, as the Diamond never reaches the Touch Diamond page with ROM & HW Info, it stucks in the Touch Diamond page with no information at all, if started not in Bootloader mode)
It seems to me that the bootloader itself could be corrupted or the model number (shows DIAM100 in Bootloader) is somewhat corrupted, as I know that the internal storage consists of more digits (like DIAM10000 or so) - and a way to fix it with MTTY? But I can't find a description of the MTTY tasks of the Diamond.
Any more Idea?
Thank you Dave, and all the others who read and think, in advance.
X
Can you get into Bootloader mode by holding down
Volume down button + Back button (Bottom right button) + Press reset with the pen
Then keep pressed the first two buttons and let go of reset, keep hold of the first two buttons until it reaches the bootloader mode
If you can do this, then reboot and put the radio onto the storage card (4GB one) and enter bootloader mode, then folllow instructions on that screen to flash the radio, and you can do the same for the rom
It sounds to me like maybe you have not managed to flash the HardSPL properly
Hi Dave!
Thanks for your quick reaction.
Yes, I can anter bootloader mode. But nothing more. Flash is not possible. Hard-SPL was the first thing I tried to flash but it also remained at 0%
How can I put files on the internal storage card from within bootloader mode? (Phone is not booting, ONLY bootloader mode is accessible...) I never encountered this before...
But I can reach the phone with MTTY.. can I access the storage card through this?
X
Have your tried different HardSPL versions ?
Im not sure what is wrong... if you are in Bootloader mode, and the USB drivers are installed and you have activesync running on the PC it should update no problem
I would make sure all the above is true, and attempt different HardSPLs
I think that is the issue as you wont be able to flash an unlocked radio or custom rom without HardSPL being flashed first
Here is another version you could try
http://selfmod.net/how-to-hard-spl-a-htc-diamond/
EDIT - And I dont know if there is a way to access the storage card from MTTY or bootloader, my guess is that you wont be able to
Also, this is a GSM Diamond right ? Not a CDMA ? (UK Networks are GSM)
CDMA flash is here
http://forum.ppcgeeks.com/cdma-diam...ond_c-cdma-sspl-hardspl-package-here-now.html
Hi Dave!
Yes, it's GSM. Thanks for your help and the links provided - it didn't help.
I tried various Hard-SPLs: OliNex 1.20, 1.30, 1.37, 1.40 and 1.93 (developers)
Result - all the same: standstill at 0%
I've seen in MTTY that I have an "upload" menu item - but need there the start address and command line for Diamond plus to know what it is meant for, I will try to find out... and if there is some new know-how out of this, I will post it here, in order that future GENERATIONS may find it *laugh*
Dave? THANKS!
Kindest regards from Switzerland - Christoph
X
Ok, lol Another possible !
Maybe your friend flashed a Signed HardSPL which means you can only flash Signed radios and roms until you flash another unsigned HardSPL
If the Radio you are trying to downgrade to is unsigned that could explain the issue... try and find a Signed radio below version 1.02.XXX and try to flash that, then try to flash to another Unsigned HardSPL, if the radio flash goes ok.
------------
Update stops at 0%
Short answer: You're running the normal HardSPL and you're trying to flash an unsigned (not signed by olinex) ROM. You need the developer version which fixes the 0% issue. Link is at the bottom of this post. Read on to understand the difference between Standard/Developer Edition!
Long answer: First you need to understand that there are two definitions of "signed". HTC and the mobile operators sign ROMs so that the RUU flash utility allows them to be flashed. Usually this is what the word "signed" in the filename means.
Then there is another definition of signed: The developers of HardSPL introduced their own signing process. They want to ensure that people flashing cooked ROMs can rely on a certain quality standard. The normal version of HardSPL will only allow ROMs signed by OliNex to be flashed. If the ROM you are about to flash is signed, it will say so in the thread you got it from. If it isn't signed, you will need the developer version of HardSPL. That one will allow any ROM to be flashed. Get it at the bottom of this posting.
A note on this: The signing process by olinex makes sure that the ROM you're about to flash won't brick your device. It doesn't mean all other ROMs are necessarily evil.
-----------
Some help on 0% flash hangs
http://forum.xda-developers.com/showthread.php?t=409425
I`ll have a look into uploading from MTTY as I have never tried that.. sounds a good feature if you can though for dead phones and such !
good luck.. again lol
magicdave26 said:
Ok, lol Another possible !
Maybe your friend flashed a Signed HardSPL which means you can only flash Signed radios and roms until you flash another unsigned HardSPL
If the Radio you are trying to downgrade to is unsigned that could explain the issue... try and find a Signed radio below version 1.02.XXX and try to flash that, then try to flash to another Unsigned HardSPL, if the radio flash goes ok.
------------
Update stops at 0%
Short answer: You're running the normal HardSPL and you're trying to flash an unsigned (not signed by olinex) ROM. You need the developer version which fixes the 0% issue. Link is at the bottom of this post. Read on to understand the difference between Standard/Developer Edition!
Long answer: First you need to understand that there are two definitions of "signed". HTC and the mobile operators sign ROMs so that the RUU flash utility allows them to be flashed. Usually this is what the word "signed" in the filename means.
Then there is another definition of signed: The developers of HardSPL introduced their own signing process. They want to ensure that people flashing cooked ROMs can rely on a certain quality standard. The normal version of HardSPL will only allow ROMs signed by OliNex to be flashed. If the ROM you are about to flash is signed, it will say so in the thread you got it from. If it isn't signed, you will need the developer version of HardSPL. That one will allow any ROM to be flashed. Get it at the bottom of this posting.
A note on this: The signing process by olinex makes sure that the ROM you're about to flash won't brick your device. It doesn't mean all other ROMs are necessarily evil.
-----------
Some help on 0% flash hangs
http://forum.xda-developers.com/showthread.php?t=409425
I`ll have a look into uploading from MTTY as I have never tried that.. sounds a good feature if you can though for dead phones and such !
good luck.. again lol
Click to expand...
Click to collapse
This is the answer. I used to have the same problem because when I bought my diamond I thought everything runs the same as the TyTN but ...
So to cut this story short, almost 90% of the 0% bar situations are because U R not using signed roms. However if Ya want to then use the unsigned HardSPL.
Hi Dave & Nazgul,
it seems that my case belonst to the non-90%
Of course I tried all this, but I have THREE diamonds - two were branded by the Swiss Swisscom (this is, in fact, the same image as the German Vodafone branding), one was the original HTC version
I'm flashing Diamonds since two years though.
My fault this time was, that I THOUGHT, this new one were HardSPL'ed, but it wasn't - and formatted the device using MTTY without Hard-SPL.
After that I had the above mentioned situation.
NO Hard-SPL was flashable - as written above - also noth the unsigned developer 1.93 edition - it always remained at 0%
I managed in the meantime to flash the original Vodafone/Swisscom ROM. So I have back the device in the official configuration (HTC Swisscom 1.97 package http://www.swisscom-mobile.ch/scm/d...pa=0x0x147x18x0x0x0x0x0&odg=SoftwareAndManual)
But - this uses Radio 1.08.xxx and I would like to downgrade because I think, Dave's hint above to use a radio before 1.02.xxx would be worth a try.
BUT - I STILL can't flash anything. Neither ANY Hard-SPL nor any Radio version nor any ROM.
The bar remains at 0%
I tried to find the original (first edition) of the Swisscom ROM Package, which used the Radio 1.00.25.05 - and then to try Dave's proposed steps.. but I can't find it anymore - all you can find is the "latest" package...
So I would still appreciate any help to be able to flash. Ok, now at least, I have a usable phone... but... I wanted to use it (as the other two) for ROM development testing, so who wants to have a PHONE!?!?
Kind regards from Switzerland - Christoph
Here is your radios
Sorry for the short post, I have a really bad hangover lol
http://forum.xda-developers.com/showthread.php?t=407956
Morn' Dave!
I tried them all - none of them was flashable... same 0%-bar.
I thought of having the V 1.00 complete official Swisscom-Pack and as part of it, the radio 1.00.25.05, which is included. Seems to me, that the c(complete) official ROM pack is flashable.
THEN I could re-try to flash Hard-SPL (with then installed radio below 1.02.xxx)
Hangover? What's this?
Christoph21x said:
Morn' Dave!
I tried them all - none of them was flashable... same 0%-bar.
I thought of having the V 1.00 complete official Swisscom-Pack and as part of it, the radio 1.00.25.05, which is included. Seems to me, that the c(complete) official ROM pack is flashable.
THEN I could re-try to flash Hard-SPL (with then installed radio below 1.02.xxx)
Hangover? What's this?
Click to expand...
Click to collapse
YEa that might work, it is almost certain the issue is the HARDSpl being either not flashed, or flashed with a signed version
Good luck !!
And the hangover is nearly gone... I cured yesterdays with more alcohol lol
Have you tried these UNSIGNED dev HARDspls ?
http://forum.xda-developers.com/showthread.php?t=400950
Hi Dave - GOT IT, solved
The "secret" was to flash noit from withi boot loader but from within Win Mobile with ActiveSync/Windows Device Center connected.
Then say "Yes" when "enterbootloader.exe" was asked to be installed/invoked.
Then the Device rebooted, flashed Hrd-SPL 1.40 correctly - and everything else onwards went fine.
Thanks a lot for your assitance, Dave and others.
Kind regards from Switzerland - Christoph
Ah.. I thought you were already using the Activesync and CustomRUU to flash it with !
Yes, the ROMs and Radios can be flashed from the storage card, but the Hard SPL needs to be done from Activesync / CUstomRUU
Pleased you got it working anyway

Categories

Resources