It seems that my power button has died on my Galaxy Nexus, which is a huge pain in the strategical locations. While I know how to turn the phone off should it shut down, I have no idea how to handle anything else. I have my friends CALL ME to be able to unlock the phone and use it.
There are some apps on Android Market that specifically state that they fix power buttons, but none of them work with the latest versions of Android according to the reviews (if there's any I've missed, let me know).
I know that the phone can be turned off using a charger, since plugging it in or out makes the screen turn on. But are there other ways to turn on the screen, since it's a phone and I'm mobile most of the time?
Is there another way to remap the keys on Android? Note that I cannot root my phone, so options like that are not good either.
Is there a way to remotely turn on Android phone with a tablet through some app? Since I'm carrying my Nexus 7 with me and it uses my phones internet connection to stay online. I tried to find an app that does this, but could not find any.
Any help is much appreciated! I do not wish to buy Nexus 4 at the moment because it isn't much of an improvement and sending it back to UK for warranty seems like a huge mess that I would rather avoid for now.
Thanks!
kristovaher said:
It seems that my power button has died on my Galaxy Nexus, which is a huge pain in the strategical locations. While I know how to turn the phone off should it shut down, I have no idea how to handle anything else. I have my friends CALL ME to be able to unlock the phone and use it.
There are some apps on Android Market that specifically state that they fix power buttons, but none of them work with the latest versions of Android according to the reviews (if there's any I've missed, let me know).
I know that the phone can be turned off using a charger, since plugging it in or out makes the screen turn on. But are there other ways to turn on the screen, since it's a phone and I'm mobile most of the time?
Is there another way to remap the keys on Android? Note that I cannot root my phone, so options like that are not good either.
Is there a way to remotely turn on Android phone with a tablet through some app? Since I'm carrying my Nexus 7 with me and it uses my phones internet connection to stay online. I tried to find an app that does this, but could not find any.
Any help is much appreciated! I do not wish to buy Nexus 4 at the moment because it isn't much of an improvement and sending it back to UK for warranty seems like a huge mess that I would rather avoid for now.
Thanks!
Click to expand...
Click to collapse
First, try pgm (slide 2 wake).
Secondly, why can't you root the device? Once you have your screen on, you can turn on USB debugging, and use to it reboot to recovery or fastboot.
Third, there's some experience from users that fixed their own device's power button.
Sent from my Nexus
Buy a new power button and put it in.
For Toro & Toroplus:
http://www.etradesupply.com/oem-samsung-galaxy-nexus-sch-i515-power-button-flex-cable-ribbon.html
For everything else:
http://www.parts4repair.com/samsung-galaxy-nexus-i9250-power-flex-cable/
kristovaher said:
It seems that my power button has died on my Galaxy Nexus, which is a huge pain in the strategical locations. While I know how to turn the phone off should it shut down, I have no idea how to handle anything else. I have my friends CALL ME to be able to unlock the phone and use it.
There are some apps on Android Market that specifically state that they fix power buttons, but none of them work with the latest versions of Android according to the reviews (if there's any I've missed, let me know).
I know that the phone can be turned off using a charger, since plugging it in or out makes the screen turn on. But are there other ways to turn on the screen, since it's a phone and I'm mobile most of the time?
Is there another way to remap the keys on Android? Note that I cannot root my phone, so options like that are not good either.
Is there a way to remotely turn on Android phone with a tablet through some app? Since I'm carrying my Nexus 7 with me and it uses my phones internet connection to stay online. I tried to find an app that does this, but could not find any.
Any help is much appreciated! I do not wish to buy Nexus 4 at the moment because it isn't much of an improvement and sending it back to UK for warranty seems like a huge mess that I would rather avoid for now.
Thanks!
Click to expand...
Click to collapse
I had a similar problem with my Samsung Captivate a long time ago. I used WidgetLocker and enabled volume wake function. It uses volume buttons to wake the screen. I'm not sure if this feature is still available, but it's worth a try. If it is not, you can ask for a refund. There are also several apps/widgets to put the phone to sleep. I used this combo for a few months before I got a new phone. Hope this helps :fingers-crossed:
I still haven't found a solution and these apps that say they are a solution, do not work on latest versions of Android. Any other options?
kristovaher said:
I still haven't found a solution and these apps that say they are a solution, do not work on latest versions of Android. Any other options?
Click to expand...
Click to collapse
download intellicover app from play store. does not require root
i think pgm is the solution, but you have to root the phone
I've managed to fix my power button recently, its a hardware problem. Do this only if you dont have warranty and are comfortable with opening up your Nexus.
Go to iFixit website and follow instructions to dissassemble the Nexus, its quite easy, a few screws and flat cable disconnects. Next, you need to remove your power button flex cable from the motherboard, do this by lifting the cable connector on the motherboard up and pulling it gently out.
Next thing is a bit tricky and you need to have pretty good sight and precision.
On the flex cable the button consists of 2 pieces, the flex cable and the button itself, which is like a black sticker sticked on the flex cable.
I've removed the sticker and the button that is glued to it with a scalpel (careful!!) and I've found actually rust and dirt on contacts (dunno how rust got there, i have expected dirt only), and then with my scalpel I've carefully scratched the dirt and rust of both parts of the button and its contacts on the flex cable. After that I've put the black sticker back on the flex as it was before (if it wont glue tape it with a small piece of tape) and return everything where it was and assemble Nexus back togeather. And voila! It works!
Keep in mind that I didn't have warranty so it was either open up and try to repair or toss a $200 device. Also, I'm not responsible for any damage that you do to your phone, this is just a brief description of my power button fix. Hope there will be more successful repairs :fingers-crossed:
I had to use volume_wake, while waiting for replacement power button. But this feature does not present on stock roms.
I believe i've read about remapping the hardware buttons; if you're interested, search google. I personally prefer and use smart screen on. I just wave over the proximity sensor and the screen turns on.
Try procedure described here: http://androidforums.com/samsung-galaxy-nexus/700265-power-button-not-working.html#post5797688.
I was very skeptical, but it indeed worked on my phone. Power button started to act normally again! I was amazed!
Wlld1 said:
I had to use volume_wake, while waiting for replacement power button. But this feature does not present on stock roms.
Click to expand...
Click to collapse
This would be the easiest thing to do if you're already rooted
Sent from my Galaxy Nexus using Tapatalk 2
dj_chapz said:
On the flex cable the button consists of 2 pieces, the flex cable and the button itself, which is like a black sticker sticked on the flex cable.
I've removed the sticker and the button that is glued to it with a scalpel (careful!!) and I've found actually rust and dirt on contacts (dunno how rust got there, i have expected dirt only), and then with my scalpel I've carefully scratched the dirt and rust of both parts of the button and its contacts on the flex cable. After that I've put the black sticker back on the flex as it was before (if it wont glue tape it with a small piece of tape) and return everything where it was and assemble Nexus back togeather. And voila! It works! D
Click to expand...
Click to collapse
Thank you so much for this! Mine just died an hour ago and I have already fixed it in under 20 minutes.
doomed151 said:
Thank you so much for this! Mine just died an hour ago and I have already fixed it in under 20 minutes.
Click to expand...
Click to collapse
Glad to be of help :good:
Solved the same problem with dj_chapz suggestion posted here http://forum.xda-developers.com/showpost.php?p=41282390&postcount=8
After I split in half the button I found oxidized contacts with green and black scurf. Cleaned it with little amount of ethyl - works perfectly!
dj_chapz said:
I've managed to fix my power button recently, its a hardware problem. Do this only if you dont have warranty and are comfortable with opening up your Nexus.
Go to iFixit website and follow instructions to dissassemble the Nexus, its quite easy, a few screws and flat cable disconnects. Next, you need to remove your power button flex cable from the motherboard, do this by lifting the cable connector on the motherboard up and pulling it gently out.
Next thing is a bit tricky and you need to have pretty good sight and precision.
On the flex cable the button consists of 2 pieces, the flex cable and the button itself, which is like a black sticker sticked on the flex cable.
I've removed the sticker and the button that is glued to it with a scalpel (careful!!) and I've found actually rust and dirt on contacts (dunno how rust got there, i have expected dirt only), and then with my scalpel I've carefully scratched the dirt and rust of both parts of the button and its contacts on the flex cable. After that I've put the black sticker back on the flex as it was before (if it wont glue tape it with a small piece of tape) and return everything where it was and assemble Nexus back togeather. And voila! It works!
Keep in mind that I didn't have warranty so it was either open up and try to repair or toss a $200 device. Also, I'm not responsible for any damage that you do to your phone, this is just a brief description of my power button fix. Hope there will be more successful repairs :fingers-crossed:
Click to expand...
Click to collapse
I just did this repair and I have large clumbsy fingers. thank you! I just had to remove corrosion between the button contacts and around. i dabbed nail polish remover (i'm not sure if that is a bad idea or not, but it got my phone working!) and did a little bit of scraping. on my sch-i515 there was a some clear plastic folded over the back sticker part that i had to get up, then i was able to get the black part up without having to fully remove it.
Hi
recently i got my Galaxy nexus broken screen replaced, i dint notice until later that the volumae button was missing , the guy who fixed it refused to accept that it was his fault , and he says he doesnt have any part to replace for it , he agreed to fix it for me if i bring the volume button replacement, tried arguing with no luck.
the question to you guys is where can i buy the volume button replacement , i tried ebay they are selling volume button flex cable but i dint see the actual volume button in any of the images.
can anyone help ?
thanks
What about picking up an used/broken GN off eBay?
Mean time try using this:
https://play.google.com/store/apps/details?id=de.hinterhofapps.sliderwidget
You will have to buy a replacement casing for it. I dismantled my phone the other day to clean the seams and the volume button is indeed easy to lose if you are not careful, it's a PITA to put it back too..
Beamed from my Maguro.
anilkuj said:
Hi
recently i got my Galaxy nexus broken screen replaced, i dint notice until later that the volumae button was missing , the guy who fixed it refused to accept that it was his fault , and he says he doesnt have any part to replace for it , he agreed to fix it for me if i bring the volume button replacement, tried arguing with no luck.
the question to you guys is where can i buy the volume button replacement , i tried ebay they are selling volume button flex cable but i dint see the actual volume button in any of the images.
can anyone help ?
thanks
Click to expand...
Click to collapse
I have volume buttons here. You can get it for free if you're interested.
The volume button is probably the most lose part of the GNex. And at the same time very light in weight. So it's very easy to lose it if not careful.
So my power button is acting up, and I think it's a hardware failure.
If the screen is on and I press the power button, the screen turns off, then back on, as if multiple key presses are being registered. If the screen is off and I press the power button, sometimes the long press power menu comes up.
I think the ribbon cable associated with the power button is failing, what do you guys think?
EDIT: just found out the power button is surface mounted to the mother board :-/ so that's a bummer if the power button is the issue.
Smith
First, and only, bump. Does anyone have any advice? I've ordered the blue plastic power button itself, but not the actual switch (I don't know how to surface mount).
I'm going to replace that. If that doesn't work, I'm not sure what else to do. Can I reflow the power switch on the motherboard somehow?
Thanks
Smith
smithisize said:
First, and only, bump. Does anyone have any advice? I've ordered the blue plastic power button itself, but not the actual switch (I don't know how to surface mount).
I'm going to replace that. If that doesn't work, I'm not sure what else to do. Can I reflow the power switch on the motherboard somehow?
Thanks
Smith
Click to expand...
Click to collapse
You can get a replacement part on ebay, but it is a piece that needs to be soldered to the board. You should call local cell repair shops and see if they have the expertise to do this.
I've had this issue for the last 3 months. I've just been using the home button as power on and quick toggle screen off.
Sent from my Galaxy S3 on CM10.1 using XDA App
BCSC said:
You can get a replacement part on ebay, but it is a piece that needs to be soldered to the board. You should call local cell repair shops and see if they have the expertise to do this.
Click to expand...
Click to collapse
Yeah. I'll see if this button replacement works first, then I'll look into having the actual switch replaced. I'm good at soldering, but I've never surface mounted, and I don't think my phone is a good place to experiment ha. I'll start looking into repair shops.
blackdragon12 said:
I've had this issue for the last 3 months. I've just been using the home button as power on and quick toggle screen off.
Sent from my Galaxy S3 on CM10.1 using XDA App
Click to expand...
Click to collapse
You use your home button as the power on and off? What do you use as the home button then?
The home button.
I never said I used the home button as power off, I use a quick toggles screen off setting for that
smithisize said:
Yeah. I'll see if this button replacement works first, then I'll look into having the actual switch replaced. I'm good at soldering, but I've never surface mounted, and I don't think my phone is a good place to experiment ha. I'll start looking into repair shops.
You use your home button as the power on and off? What do you use as the home button then?
Click to expand...
Click to collapse
Did the plastic button change fix your problem? I think I am having a power button problem as well just not sure.
Hello,
I have a Samsung Galaxy Nexus. Yesterday, power button has stopped to work. Nothing was happened when I pushed it.
I tried to open the device (my mistake ) and I tried to see if there was a problem. By opening device, I have accidentally ripped the power button component. So, now it's not connected to the nappe.
Logically, it's impossible to start device now without that connection between power button and nappe.
My problem is that the internal storage of my device contains a lot of photos that I would like to save.
Do you know if there is a way to get these photos ?
Thanks by advance for your help.
Sylvain
boot
i had that problem with another phone....which had a work around
but you may not like it.
1. you may be able mess with the pins in micro usb to get it to "trick" itsleslf on (idk if itll work for this phone, dont really wanna risk frying the phone too)
2. buy a new ribbon online. i took mine apart to paint it . and luckily this phone has a ribbon that slides and locks onto the board instead of soldered on
3.idk what bootloader you have but yours may have an option to take the battery out. *button press comb.* then you can get into download mode(which wont help) but could bring you into the bootloader....unlocked of course.
otherwise....
~*option 2*~ is the best course to take...and they are cheap
rlparnell said:
i had that problem with another phone....which had a work around
but you may not like it.
1. you may be able mess with the pins in micro usb to get it to "trick" itsleslf on (idk if itll work for this phone, dont really wanna risk frying the phone too)
2. buy a new ribbon online. i took mine apart to paint it . and luckily this phone has a ribbon that slides and locks onto the board instead of soldered on
3.idk what bootloader you have but yours may have an option to take the battery out. *button press comb.* then you can get into download mode(which wont help) but could bring you into the bootloader....unlocked of course.
otherwise....
~*option 2*~ is the best course to take...and they are cheap
Click to expand...
Click to collapse
Hello,
Thanks for your answer.
I took option 2 for the moment and I bought power button nappe on internet.
I wait to receive it and i will try the operation of last chance lol.
Sylvain
assembly
When I put mine back together. The sticky back to the buttons wouldn't hold to put it back together.
I used a razor....clean it up and scrapped the sticky back to some Velcro I had.
I would hope they send it with the ?double sided tape? Needed to hold it on.
I dropped my optimus g pro and shattered the screen. I ordered a new digitizer online and replaced the glass today. When i power the phone on all i get is the home button cycling through its colours, the top left button when pressed makes a small vibration, when i plug the USB cable into my PC i get the LG-E980 icon but it doesn't contain any files or folders, nor can it see my sdcard.
I re did the repair, i put the old digitizer back on, re did the repair again but still am having no luck. Does anyone know what is happening? Is it salvageable or should i cut my losses and go out and buy a new device?
Russ.
Wait to be clear, even with your old screen back on, you get the same results?