I have two questions....
1) I have assigned my camera and recorder button...but every time I reset or change batter the camera buttom resorts to the default (camera)
2) I am looking for a way to assign the volume modes (on/off/vibrate) to a button....has anyone sorted out a way to do this....it would also be great if there were a way to assing flight mode to a button also...i have having to pull out the stlyus for these common activities....I have tried pocket zen phone but I still need my stylus to select the profile (maybe my fingers are too big).
Hi,
for question 2 here in the forum you can find restart radio, a program that allows you to put in the program folder, and then assign a button for switching on/off the flight mode.
bye
Thanks...I found the post but can seem to locate the actual program.
there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!
Hi, is it possible to press the power button once to put the phone to keylock and lights off?
thanks
you can also hold the END key
hey, i got it to work,
But i'm using S2u2 to do it with smarttoolkit.
http://s2u2.ac-s2.com/
Install S2u2 with onto the phone then use a freeware program called, mymobile.
http://www.mtux.com/
with it, i can change the s2u2 settings on the pc with the mouse.
then with smarttoolkit, i add a hotkey
http://smarttoolkit.wordpress.com/
I add S2u2 as a hotkey and i bind it to the power key.
now it works perfectly, just don't hold down the power button and tap it a few times.
it shuts the phone off. lol
I have a question. Is it possible to do the program, which by pressing the key, it turning on/off the screen light. The button on top is closing everything, i want to turning off only light.
Here is the program which turn mouse or 4 way joy .
Pls help me
Prezesik said:
I have a question. Is it possible to do the program, which by pressing the key, it turning on/off the screen light. The button on top is closing everything, i want to turning off only light.
Here is the program which turn mouse or 4 way joy .
Pls help me
Click to expand...
Click to collapse
Install psShutXP (site). It also creates a shortcut in programs called "display switch". Assign this to a button ét voila, the display switches off while the rest keeps running. Be aware that keypresses still work in this mode!
Grtz.
Thx u
This program is great.
"Assign this to a button ét voila" - where i can assign button for light off only?
Prezesik said:
I have a question. Is it possible to do the program, which by pressing the key, it turning on/off the screen light. The button on top is closing everything, i want to turning off only light.
Here is the program which turn mouse or 4 way joy .
Pls help me
Click to expand...
Click to collapse
i think your rom already contains a program called "display switch" : take a look in your program tab.
Bye
Does anyone have an easy recommendation on how I can toggle the screen on/off without interfering with music playback in WMP since the Rhodium lacks mapable hardware buttons?
I was hoping turning it face down would do the trick, but that doesnt seem to do anything. Any way I can get it to toggle the screen when I flip it face down? Would I have to use Gyrator or a similar program to do it?
Goanna said:
Does anyone have an easy recommendation on how I can toggle the screen on/off without interfering with music playback in WMP since the Rhodium lacks mapable hardware buttons?
I was hoping turning it face down would do the trick, but that doesnt seem to do anything. Any way I can get it to toggle the screen when I flip it face down? Would I have to use Gyrator or a similar program to do it?
Click to expand...
Click to collapse
there is a reg edit for this so the power/standby button doesnt stop playback. But you can also use keyboard control to map the mute key if you have a tilt2.
I mapped the mute button to:
1 press: S2U2 Lock
2 press: S2U2 lock and turn of the screen light
3 press: Soft Reset
Goanna said:
Does anyone have an easy recommendation on how I can toggle the screen on/off without interfering with music playback in WMP since the Rhodium lacks mapable hardware buttons?
I was hoping turning it face down would do the trick, but that doesnt seem to do anything. Any way I can get it to toggle the screen when I flip it face down? Would I have to use Gyrator or a similar program to do it?
Click to expand...
Click to collapse
the easiest thing to do is install psshutxp. it is a great app. when you hold your power button it gives you option of screen off, turn phone off, or reset. the screen off works great for wmp playback
Hey why don't you use free key mapping utility by tarkim, I am using the same, it lets you map any hardware key 3 times. Check out the following link
http://yourmobileblog.com/2009/12/free-key-mapping-utility-for-windows-mobile/