Related
i don’t see why we shouldn’t open a section for the 4100 here. A lot of the developments that goes on here also work on the 4100.
I have done some research on it and so far I found out that the ppc4100 use 2 file to flash the rom one is the boot and the other is the WM image just like the others do. Now both of those files are nb0 format and can be extracted with dumprom.exe which is available here. It can flashed back on the ppc4100 using a flash card to hold the image and triggering it by booting with the bootstrap.
Wish list
to edit the image file ( to change certain files)
to compile the extracted files from the rom ( to customize the rom with new programs or to custom update to a newer operating system )
what does anyone think?
u can change the press icon on the 4100 its located in a file called bobo.exe in the windows folder.
see? its almost the same there is very little change i think we need to sit down for a little while and think about how good this will do.
it will bring in more readers that would like to read about the 4100 thus u will generate more traffic that also will generate more donations
so pls i dont know how to get the athoraty's attentions here at least concider it
or comment
thanks
I am very intersted in the 4100 development as well.. I was hoping someone in here or maybe a few would be interested in sharing some knowledge and possible experience. I have done a lot of research and played around quite a bit with this over the last week using various XDA tools as well as hex editor, ect. If anyone would be interested in helping please post us here.
hey jr97ai. might as well start posting here maybe we will catch someone's attention and they will declare the ppc4100 a worthy of this site
---------------
the original rom files for the 4100 are the currunt morst recent update from at& however, both files are *.bn0 extention. as follows.
SP_E0402_230A.nb0
SP_K1112_230A.nb0
i recieved those files from audiovox a little while ago. jr97ai and myself have been working on this and have extracted the files out of the romfiles with the use of dumprom.exe. (great app by the way). i think jr97ai knows alot more about this than i do and can explain a little better.
i will attach the bootstrap rom file along with a letter that came with the cd that was sent from audiovox. i can attach the rom file as soon as i free up my bandwith
I have been playing around with mkrom and have been experiencing some problems. as it says on mkrom its not the most user friendly program. no its not, not at all, not even close. but i still try anyways lost but still trying.
if anyone can somehow point us to a direction it coul dbe verry helpful.
there might be a possibility tto use the exsisting xda WMse existing rom to use on the 4100. they seem to be similar. they do use the same operating windows after all.
well i tryed to post the rom file many times it didnt work. its uploaded in the ftp if someone can post it.
every time i try to post it shows this err.
Upload Error: Could not upload Attachment to ./files/sp_k1112_230a.rar
question to anyone who can answer.
to change the operating system from win2003 to 2003se wouldi need to change the bootstrap as well?
i am thinking i could use a nb1 and rename it to nb0 it should be the same.
if you would like to see a new section appear for the audiovox 4100 please post saying so. maybe that will gets omeone's attention.
we got 60 views and only 2 ppl have posted.
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
im working with audiovox ppc4100 , and if u wanna dump with rom for make permenent rill file and dont losse it when u make a hard reset ,,i think the best solution its when u replace rill u can make a completat backup in a sd card then when u have to make a hard reset u can restore your backup and all will work ok...by the way i have working well mms, photo contacts , npencil , ms money , etc.
not jsut the rilgsm
now that we are able to flash the rom to the ppc4100 i am thinking we could change the operationg system. i am running towards the wm2003 se . i am trying to look for a basic rom nb1 format so i can try to flash it.
i am thinkiing it will work but i am worried about the phone part of the ppc.
do u have any thoughts on this?
No ppc4100 folder, any help please!!!
faramisimo said:
ok .. so the rom for the 4100 is in the xda ftp sire. the file is called SP_K1112_230A.rar under ppc 4100
ftp info
ady: xda-developers.com
username: xdaupload
pass: xda
Click to expand...
Click to collapse
Report about wrong user name and password
I need to reflash my PPC4100. Looking for rom and can`t find it. May be somebody have a original ROM from AT&T, or custom ROM, or WM5 ROM?
for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!
Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
can someone host the file on something other than rapidshare, i cant download it for some reason.
zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....
Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain
stick them in the extended rom and install from there.
Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great
I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!
bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.
MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275
I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all
andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.
aaah the CWW file is the 2nd file in the OP
acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers
Hi,
Does this work with other ROM ?
Thks
cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all
installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all
Greetings,
I recently acquired a Kinpo iDo s601 and it comes with Windows Mobile 5, does anyone have any idea about how can I upgrade it for Windows Mobile 6? I've been searching for ROMS of that kind but I couldn't find anything adequate for this PPC. If anyone have any ideas I'd like to hear from you.
Thanks in advance
João
Ptakatsuki said:
Greetings,
I recently acquired a Kinpo iDo s601 and it comes with Windows Mobile 5, does anyone have any idea about how can I upgrade it for Windows Mobile 6? I've been searching for ROMS of that kind but I couldn't find anything adequate for this PPC. If anyone have any ideas I'd like to hear from you.
Thanks in advance
João
Click to expand...
Click to collapse
Do you have any english rom you can send me, I can buy one only with Chinese rom.
thanks
I am also looking for a wm6 rom for my Ido_Neon (s601) currently running in wm5 which i recently acquired in Dubai. If anyone has any idea how to upgrade this device please advice me too..Thanks
just like others, i got that phone today, and this is my first ppc phone, it seems quite interesting, and like someone can hack wm6.1 for us.
here is rom to download.
english
http://www.ido-me.com/downloads/S601_WWE_0211a.zip
chinese
http://www.vis.com.hk/download/s601_116_T.zip
i found a tool for decompiling the official rom from china forum, ( http://www.inv.org/viewthread.php?tid=9865 ), and i put these stuff here, so someone interested in these phone can now cooked the rom they want.
after trying several times, i think the tools on the last post has some problems.
it can decompile the rom, but it can't recompile it, even you did much of moving the dump files, the recompile files has nothing change as the orginal one, no idea why and i need help from others.
still waiting someone to mod the above files, so we can make our own wm6 for s601.
just one more push for those who wanna be our GOD.
how to install that rom??.
please..
please somebody tell me h0w 2 install that rom.. i dont kn0w hoy to install bin fle for s601.
to intall the new rom:
1, put the eboot.bin and nk.bin on sd card
2, hold voice record+ right hand buttom
3, push reboot pin
4, the screen shows 3 icon , you first format your phone, and reboot, and you update your eboot.bin, and lastly you update your os.
5, then you can flash your phone successfully.
thnks
thnks f0r d steps..
How to flash
Can somebody help me, I'm still trying to flash my phone.
What are exactilly the buttons and how should I press them?
I don't have the user manual or quick guide so would be difficult to know wich button to press without some picture.
I would appreciate some help, please
Thanks.
arthurson said:
to intall the new rom:
1, put the eboot.bin and nk.bin on sd card
2, hold voice record+ right hand buttom
3, push reboot pin
4, the screen shows 3 icon , you first format your phone, and reboot, and you update your eboot.bin, and lastly you update your os.
5, then you can flash your phone successfully.
Click to expand...
Click to collapse
Hi,
How to flash?
Steps 2 and 3.
Regards
help me
someone please help me out i just formated my ido s601 and icant download the bin file english version
please if some1 who has that file please send me a copy
my email [email protected]
thanks!
another link
please somebody post another ling for downloading a rom for s601. the previous one it dosnt work anymore. thnks.
urgent reply needed
did any one have these english roms plz plz upload i formated and also changed the boot loader to some version phone started with that boot loader and in vibrate mode need both "Eboot.bin" and"nk.bin" files
iDo(600,630,601)
Also I have those there models of iDo(600,630,601) did any body tell how to dump all rom files from those devices so i can put it on xda fourm users to use
pls if anyone who has the rom files for ido s601 pls upload it. thanks
sharing is good!
Hi,
Form some month, I was usingthis rom on my htc touch pro2: RUU_Rhodium_S2_HTC_FRA_2.07.406.1_Radio_Rhodium_4.49.25.91_Signed_Ship
Thanks to this web xda helping me to install this rom instead of the one comming with my orange (french mobil phone operator).
Then, due to personnal reason I had to re-install an old rom from my operator:
_HTC Touch Pro2_WM6.5_RUU_Rhodium_S_Orange_FR-B2B_1.90.73.1_Radio_Rhodium_4.49.25.17_Signed_Ship
Untill this point, I did not get any trouble.
But this morning i tryed to install the Energy Rom:
|RHODCMDA|.¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ * |Sep 29| 21916|21680 * Sense 2018
(forum.ppcgeeks.com/cdma-tp2-upgrades/86489-rhodcmda-energy-sep-29-21916-21680-sense-2018-a.html)
At the first reboot, my phone freezed at the screen showing the release installed:
B 80
R 4.49.25.17
P 61.44tc.25.32u
D Energy
As my phone is not detected any more by my computer, I can't do anything.
I'm looking if there is someting usefull in the xda-tools.
I found a thread name "unlock, flash and even relock your TP via the SD card!", i will investigate on it.
To help me, don't you have any ideas that can help me?
Is there any hope ?
Thx
Akaiah.
PS.
relocate my post if he is not at the right place.
Just hold voldown key while resetting your phone and flash new ROM, preferably the stock one .
Yep, upgrade from sd-card worked perfectly.
As a reminder:
- choose the rom you want to install.
- extract the .nbh file from the rom.
- rename this file into "RHODIMG.NBH" and place it at root on your sd-card.
- Soft-reset your htc TP2 while pressing "power" and "VolDown".
You will get the nice red/green/blue screen (keep pressing) then, a grey screen asking you if you wanna install RHODIMG.nbh.
- release both buttons and press "power", to install
- or press "volDown" to cancel .
Every thing is right now.
Thanks
Akaiah.
PS.
Any idea why Energy rom did not work for me ?
akaiah said:
Untill this point, I did not get any trouble.
But this morning i tryed to install the Energy Rom:
|RHODCMDA|.¸¸.·´¯`·.¸¸.- Energy -.¸¸.·´¯ * |Sep 29| 21916|21680 * Sense 2018
(forum.ppcgeeks.com/cdma-tp2-upgrades/86489-rhodcmda-energy-sep-29-21916-21680-sense-2018-a.html)
At the first reboot, my phone freezed at the screen showing the release installed:
B 80
R 4.49.25.17
P 61.44tc.25.32u
D Energy
As my phone is not detected any more by my computer, I can't do anything.
I'm looking if there is someting usefull in the xda-tools.
I found a thread name "unlock, flash and even relock your TP via the SD card!", i will investigate on it.
To help me, don't you have any ideas that can help me?
Is there any hope ?
Thx
Akaiah.
PS.
relocate my post if he is not at the right place.
Click to expand...
Click to collapse
I believe Orange France is a GSM network and you tried to install a CDMA ROM. Go here for the GSM version of the Energy ROM.
Good luck.
So,
First, sorry...
I stressed for nothing and opened this thread without realy reading the forums and searching for answer to my problem.
All the answers are on the forum, I should have done a more research before posting.
About CDMA/GSM: my tp2 is a RHOD100 -> GSM (according to different thread).
I will try the gms version of Energy.
Thanks.
Akaiah.
akaiah said:
So,
First, sorry...
I stressed for nothing and opened this thread without realy reading the forums and searching for answer to my problem.
All the answers are on the forum, I should have done a more research before posting.
About CDMA/GSM: my tp2 is a RHOD100 -> GSM (according to different thread).
I will try the gms version of Energy.
Thanks.
Akaiah.
Click to expand...
Click to collapse
I think you'll enjoy it. I use the 21680 CHT and am quite pleased with it.
The thread I linked to in my last post is full of great info. Please read the first several pages, as they have the answers to 90% of the questions that come up. If not, a search will usually turn up a solution. And, lastly, there are many great members to help if needed.
Enjoy...
i had my acer e101 flash from sd card and i think i used flash bin not compatible with my unit. now all i got when i turn on the unit is acer logo flashing one thing, i noticed is that it is flashing to different logo size one is the right as it used to be and the other one i think is from the bin i've flash. i try to hard reset but its not working i also tried to used a diffrent custom rom loader for acer but all i got is up to downloading mode and it will hung up. im new here and i dont how i can fix this? i can just go into download mode but i think i cant go anywhre without the right rom loader/flasher for acer e101.
HELP WILL BE GLADLY APPRECIATED!!!
THANKS IN ADVANCE!
still no reply i guess no one is interested in helping me
Recovery in download mode acer_e101
feeling awesome today!!! atlast i already fix my problem and i found recovery flasher for my acer e101. now its working fine i've freshly installed clean rom (OS_ACER_2.003.13.EN.01_WM65_E101) this is WM 6.5 PRO.
mrkslyx said:
feeling awesome today!!! atlast i already fix my problem and i found recovery flasher for my acer e101. now its working fine i've freshly installed clean rom (OS_ACER_2.003.13.EN.01_WM65_E101) this is WM 6.5 PRO.
Click to expand...
Click to collapse
Would you mind sharing your findings with everybody so we all can benefit from them?
Cheers,
M_T_M
m_t_m said:
would you mind sharing your findings with everybody so we all can benefit from them?
Cheers,
m_t_m
Click to expand...
Click to collapse
yup i will be uploading the flasher later today i'll just zip it again to put the rom i used and also i will include a read me file for everyone
f.y.i. This not my work and im just using a program i've got from acer club ru. And i've done "no modification" what I did is just put the image file i liked.
Acer_E101_via_DOWNLOAD_MODE
here it is download and extract to your drive remember to seek first for the read me file included in the zip file ACER_E101_RECOVERY_VIA_DL_MODE_without_UpdateImage!!! ENJOY!!!
NOTE: THIS IS ONLY THE DOWNLOADER YOU CAN PUT YOUR "UpdateImage" FOLDER OF YOUR CHOICE THAT YOU'VE EXTRACTED FROM ANY ROM OF ACER E101 INSIDE THE FOLDER OF "EUU" IN "IAC Corp" FOLDER.
""""""TO BE UPLOADED VIA LINK URL WILL BE THE ONE WITH UPDATEIMAGE FOLDER INSIDE"""""""
http://www.4shared.com/file/ddRblCq7/ACER_E101_RECOVERY_VIA_DL_MODE.html
http://rapidshare.com/files/449351595/ACER_E101_RECOVERY_VIA_DL_MODE.zip
New ACER E101 Rom (Manila 2d)
here is my rom ive cooked with manila2d and some modification from my first release.
included in the rom are the ff:
MANILA 2.0.1919.1432
Ibrythill_WM_7
QUICSHUTDOWN
M2DC
S2U2
xTASK
NOTE: USE LATEST WINZIP TO EXTRACT THE FLASH.BIN
THIS ROM IS PROVIDED AS IT IS UNDER NO WARRANTY TO YOUR PRECIOUS CANDY BAR!!!! HEHEHEHE ENJOY THE ROM AND FEEL FREE TO MODIFY IT AS YOU LIKE.
credits to ALL THE MAKER of THE PACKAGES included and ESPECIALLY TO MICROSOFT, ACER and HTC. (YOU KNOW WHAT I MEAN PEACE!!!)
LAST BUT NOT LEAST TO THE ONE WHO MADE IT POSSIBLE TO WORK FOR THIS ROM. THANKS GUYS!!!!
TO ALL THE PEOPLE HERE IN XDA KEEP UP THE GOOD WORK AND THANK YOU ALSO AS FOR I'VE LEARN A LOT FROM THIS SITE.
http://www.4shared.com/file/cKTN1Jg0/ROM_E101_BUILD_23566_WWE_MANIL.html
Rom preview
Here's what the romm looks like see for yourself!!!!
Great job
Can you please tell me how did you do this rom? with w/c kitchen ?
I installed your m2dc in my acer e101 smart phone.now when i try to revert my previous ROM by active sync it says you can not change language and when i try to flash by SD card it struct in loading SD card update.
i Was using Acer_E101_2.004.04_EN_IN ROM
Please help me to revert back to original ROM
neerajsain said:
I installed your m2dc in my acer e101 smart phone.now when i try to revert my previous ROM by active sync it says you can not change language and when i try to flash by SD card it struct in loading SD card update.
i Was using Acer_E101_2.004.04_EN_IN ROM
Please help me to revert back to original ROM
Click to expand...
Click to collapse
my friend first of all M2DC is not my work maybe what you are saying is you installed my cooked rom w/c has M2DC. now for your problem about going back to your previous rom obviously you cant do it via acvtive sync bec as you are saying you cant change a language this error come out bec the rom installed now (w/c is my cooked rom) is .13_EN, means that it is originated from english version purely no sub language w/c is in the case of the one you are trying to install that is .04_EN_IN. this is english with your sub language of your local language where the unit came from. now the solution is use the recovery via dowload mode. i have already posted for this and you can also dowload this here with step by step instruction. DIGG in and search everything you need. if you cant find it i'll post it again for you. thanks alot for trying my rom.
Thank you soo much my friend you save my phone .... i follow all your instruction and my phone is ok now ... thank you very much..
akpsaudi said:
Thank you soo much my friend you save my phone .... i follow all your instruction and my phone is ok now ... thank you very much..
Click to expand...
Click to collapse
you are very much welcome my friend! for ur info there is a bug on the ROM which is i will try to resolve as soon im not busy @ work. BUG(SD UPDATE STOP WORKING) anyway you know how to recover now ur unit and this is not a big deal. THANKS!!!!!
Please!!!somebody help me!!!please!!! my acer e 101 is in italian and a try to flash it with sd card updater and y touch by mistake the batery and now it wont recognize my sd card and when i try to use euu it gives me an erorr and it wont work any more now my phone is stuck an acer logo it works only on download mode but the euu wont work i try with the device manager when i try to update says that is already up to date please help me Please! SOMEBODY? HELP
mrkslyx said:
you are very much welcome my friend! for ur info there is a bug on the ROM which is i will try to resolve as soon im not busy @ work. BUG(SD UPDATE STOP WORKING) anyway you know how to recover now ur unit and this is not a big deal. THANKS!!!!!
Click to expand...
Click to collapse
====================
Hi :
I Have a Problem With Recovery Update.
"DownloadForm_2005.exe" had an error and not run.
Getting message file requested is not valid on download link of 4shared. Can you reload or give new link
sir how can i remove this 3 button on my home menu? the key lock, start menu and shortcut menu. im using acer e101 6.5 prof
andreiutza said:
Please!!!somebody help me!!!please!!! my acer e 101 is in italian and a try to flash it with sd card updater and y touch by mistake the batery and now it wont recognize my sd card and when i try to use euu it gives me an erorr and it wont work any more now my phone is stuck an acer logo it works only on download mode but the euu wont work i try with the device manager when i try to update says that is already up to date please help me Please! SOMEBODY? HELP
Click to expand...
Click to collapse
you can read all the post here on how to recover your unit, if you know how to put your unit unto recovery via download mode there is a post here on how it works. search for it my friend.
vb_progsys said:
====================
Hi :
I Have a Problem With Recovery Update.
"DownloadForm_2005.exe" had an error and not run.
Click to expand...
Click to collapse
what is your problem my friend pls elaborate more so that i can help you beacause right now my acer e101 is not with me anymore i've given it to my wife but i still do remember how to make it works.
my friend i am very sorry because i lost all of my files for acer e101 and i not using the unit anymore. you can ask somebody here to help you to upload again what they have donwloade previuosly.
kitomi98 said:
sir how can i remove this 3 button on my home menu? the key lock, start menu and shortcut menu. im using acer e101 6.5 prof
Click to expand...
Click to collapse
what do you mean by remove the 3 button, those are in the rom's user interface of acer. how do you want your home menu to look like?