XDA EXEC freezed on O2 logo - JASJAR, XDA Exec, MDA Pro Software Upgrading

Hi All,
Hope someone out there can help me.
I just upgraded my XDA EXEC with TML_V85 WM6 1_20764, everything went well. But when I performed the reset, my XDA is freezing on the O2 logo.

Welcome
Please READ the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
You´ll find your answer there
Good luck,

Same Problem
Exactly the same problem here.
Had flashed several ROM's over the last 2 years, never a problem before.
Went to the WIKI.
After Item 10:
Quote : 10. On PC type “task 28 55aa” as in Technical Stuff wiki page and hit enter
that's what I get.
set 14 0
HTCST ÚÈÒHTCEUSB>“task 28 55aa”
Invalid command : “task
For a help screen, use command ? or h
USB>
Am I doing sth. wrong ?
Cheers
hrb

Wiki
Just an additional remark: the case described by Henry (and also experienced by myself) is NOT COVERED in the Wiki. We are NOT stuck in BL-Mode but in the Logo-Phase.
@ORB3000: maybe you can provide more help than just refer to "look at the Wiki..."
...or do you just want to UP you Post-Count ???

Solution
henry, that's the sequence with mtty which get's you out of trouble:
USB>set 14 0
HTCST ÚÈÒHTCEUSB>
USB>task 32
Level = FF
USB>task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2C70000
All Size: 0x7770000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0x4B00000
USB>
It's different from the one in the Wiki
Cheers
hrb

I solved the problem, I pressed the three buttons (i.e reset+poweron+light) all together, attached xda exec to cradle and installed the new upgrade.
Now it's working perfectly again.

Related

Backing up with pmemdump and pdocread...

I m trying to dump my original 3UK rom from a qtek 9000.
After a bit of reading i tried these 2 commands to dump the OS as well as the bootloader:
pdocread 0x0 0x3FA0000 QTEK.RAW =>Created a file of 63.6MB
pmemdump -m 0x90001000 0x40000 bootloader.raw => Created a file of 256Kb
I created with the above commands a further 2 files with the extension of nb with the same filesizes. (Dont know if this is a good idea.....any idea??)
With the d2s command i know that the following memory addresses exists:
Dump Bootloader:
70000000 80000
OS ROM + splash:
70100000 3FA0000
XtendedROM:
74100000 A00000
Radio ROM:
60000000 a24200
Now i m a bit confused that if i need to create files of the extended rom and radio, which command should i use? pdocread or pmemdump ??
And which one is the correct memory address?? As u noticed the bootloader for example with the pmemdump command uses "0x90001000 0x40000" whereas the d2s command uses the memory map of "0x70000000 0x80000"..... I m a bit confused
I will appreciate any feedback......
Thanks in advance
Z£Y$

Error 112 or 113

If you are the 112 error,
with mtty set 14 0 and nothing then task 28 and i have results like
set 14 0
HTCSF kEØ(HTCEUSB>
USB>task 28
Read data error in tag
DOCInfoTableinitHW+
Binary0 Size: 0x100000
MountVolume:status=23.
FAT0 Size: 0x0
FAT1 Size: 0xA00000
FAT2 Size: 0x2C70000
All Size: 0x3770000
FAT0_ADDR=0x100000,FAT1_ADDR=0x100000,FAT2_ADDR=0xB00000
USB>
Source : http://buzzdev.net/read.php?40,34924,35161#msg-35161
Error 113,
task 28 55aa
Wait..
Read data error in tag
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2C70000
All Size: 0x7770000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0x4B00000
USB>
After reflash you PPc and it's OK
Source : http://buzzdev.net/read.php?40,34924,35161#msg-35161
I'm having this error and when i try "set 14 0" appears
"flAbsWrite is fail.:i=1FD00,ebstart=90900000
DOC_WriteFAT0 fail: Start=3FA0000,Len=200,status=7C
HTCSF kEØ(HTCEUSB>"
Any solution?
Tks in advance
BonesC said:
I'm having this error and when i try "set 14 0" appears
"flAbsWrite is fail.:i=1FD00,ebstart=90900000
DOC_WriteFAT0 fail: Start=3FA0000,Len=200,status=7C
HTCSF kEØ(HTCEUSB>"
Any solution?
Tks in advance
Click to expand...
Click to collapse
It's possible a hardware problem
teddybear3k said:
task 28 55aa
Wait..
Read data error in tag
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2C70000
All Size: 0x7770000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0x4B00000
USB>
After reflash you PPc and it's OK
Source : http://buzzdev.net/read.php?40,34924,35161#msg-35161
Click to expand...
Click to collapse
It worked for UNIVERSAL I rebooted after executing this procedure and reflashed
It worked great!!!
I got a question from you...
Are you an angel???
Man you just saved my ass!
This error 113 was freaking me out!
it took 6 hours of my time and I was getting mad.
you are the best
[REF] Guides | Tutorials | FAQs | Stickies | etc.
Included on compilation thread for future references:
http://forum.xda-developers.com/showthread.php?t=549207
Hi guys pls help in my dopod 900. I flash a wm 6.5 v12.1 by tomal 128mb,i cant open some applications and hang, when i reflash to another version ko wm6.5 v10 64mb,cant always appear erroe 112
Hey,
I got error 112. Then, I tried this methode with my HTC Universal. But when I tried to install win 6.1 on it, I alway get error 112.
Ebi
I get error 112 too
ebi11 said:
Hey,
I got error 112. Then, I tried this methode with my HTC Universal. But when I tried to install win 6.1 on it, I alway get error 112.
Ebi
Click to expand...
Click to collapse
I get error 112 too. Can someone with an HTC Universal help me out please? Maybe we can get on instant messaging and you can assist me in real time?
Searching...
Have a look here on post 2

STUCK in the middle of upgrading

Hi
my UNIVERSAL stuck in the middle of upgrading on 7%
i try in bootloader but nothing
some help please
dzuljo said:
Hi
my UNIVERSAL stuck in the middle of upgrading on 7%
i try in bootloader but nothing
some help please
Click to expand...
Click to collapse
If you already read the Wiki, try to re do all the process from the begining with a different ROM
Good luck,
solved with mtty 116
have same problem here......
stuck on 7%
i use mtty set 14 0
then task 28 bute get error like this
Read data error in tag
DOCInfoTableinitHW+
Binary0 Size: 0x100000
MountVolume:status=23.
FAT0 Size: 0x0
FAT1 Size: 0xA00000
FAT2 Size: 0x2C40000
All Size: 0x3740000
FAT0_ADDR=0x100000,FAT1_ADDR=0x100000,FAT2_ADDR=0xB00000
what sould i do?
need help plz

I'm in SUperCID but can't Re-partition with task 28 55aa

Sorry about this.
I have a problem with Upgrade my ExtROM. I didn't have stuck problem for upgrading ROM or Radio, but only stuck on upgrading ExtROM (Error 113). I have been running SIM Unlock to SuperCid but in mtty I can't format/re-partition with task 28 55aa
USB>set 14 0
HTCST ÚÈÒHTCEUSB>
USB>task 32
Level = 0
USB>task 28 55aa
Wait..
flFormatPhysicalDrive:status=115
DOC_format failed!
USB>
Click to expand...
Click to collapse
Thanks 4 attention
Does anyone Help...
I didn't see the problem at here
USB>task 28
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2A70000
All Size: 0x7570000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0x4B00000
Click to expand...
Click to collapse
but in here
USB>task 32
Level = 0
USB>task 28 55aa
Wait..
flFormatPhysicalDrive:status=115
DOC_format failed!
USB>
Click to expand...
Click to collapse
Why ?????
need help
need help
please......

HTC X7500 Advantage Probleem

plz.. help me.. my smartphon Not started...I tried everything but ROM- No Entry
Cmd>task 32
task 32
Level = 0
Cmd>lnbs mymac.bin 75108000
lnbs mymac.bin 75108000
Format by TrueFFS ver.: 7.1.0
:F=mymac.bin
:A=75108000
:O=00000000
:L=FFFFFFFF
start NB image download
SH
Load ADDR: 75108000 Length: 13
Programming DOC flash blocks by serial port...
Buffer=4M,0x400000
DOCInfoTableinitHW+
Binary0 Size: 0x200000
FAT0 Size: 0x5000000
FAT1 Size: 0xB00000
FAT2 Size: 0x9080000
All Size: 0xED80000
FAT0_ADDR=0x200000,FAT1_ADDR=0x5200000,FAT2_ADDR=0 x5D00000
ERROR: NO header matched
Transfer CERT error
Flash Programing Error
Please help me

Categories

Resources