Related
I was in the process of applying an upgrade to the ROM using my laptop.
Everything was going fine so I went to make a drink. When I returned the screen saver was active on the Laptop and the screen on the XDA 2 was grey showing a progress report of 55% complete. When I looked at my PC sdreen there was an error message saying that my USB connection had failed (not the exact words) and offered to try to re-connect or end connection. I tried both but couldn't get activesync to reconnect. I have since tried a soft reset and hard reset but all I have is the O2 start screen with the bubbles. I can not switch off without removing the battery. Please Help
Regards Peter
i had a problem with my ROM and DCS helped me..
download the ROM from here and try again
http://forum.xda-developers.com/viewtopic.php?t=12528
it worked fine for me.
hope this helps
regards
nya
ptopping said:
I was in the process of applying an upgrade to the ROM using my laptop.
Everything was going fine so I went to make a drink. When I returned the screen saver was active on the Laptop and the screen on the XDA 2 was grey showing a progress report of 55% complete. When I looked at my PC sdreen there was an error message saying that my USB connection had failed (not the exact words) and offered to try to re-connect or end connection. I tried both but couldn't get activesync to reconnect. I have since tried a soft reset and hard reset but all I have is the O2 start screen with the bubbles. I can not switch off without removing the battery. Please Help
Regards Peter
Click to expand...
Click to collapse
It looks like the screensaver screwed up the connection. Not to worry, your device can still be upgraded.
Put the device in boot loader mode by pressing and holding the jog button (bottom centre of device) and the power button at the same time and press reset button. This should show the bootloader screen (dark screen with Serial V1.0x displayed). Put the device in the cradle and it should then display USB V1.0x. You don't need Activesync as the upgrade process looks after its own connection.
Make sure that the cradle is connected directly to th USB port on your laptop and not to a HUB and that the power supply is connected to the cradle. Disable the screensaver on your PC , restart the upgrade and it should work OK.
Hi there, I am from Malaysia, have feel question:
1) I am currently using Rom 1.72 which WAXX posted it earlier. Should I upgrade to this version that dcs posted? Is it necessary?
2)What is Blckberry that u guys kept on mention?
Thanks you very much.
You are a STAR Sir
Thank you very much for your help. It is people like you that brighten up the dullest of Manchester days. Your advise worked a treat and saved me from returning, what was a paper weight, to the "O2 Service Dept" (who are subcontracted by O2). Why they couldn't have given me the same instructions I will never know.
Just to alert others to the incompetance of the whole system. Nowhere in the instructions does it tell you to switch off the screensaver, (I suppose with hindsite I should have checked it myself!!!).
I spent the best part of an hour on the phone being passed around different departments as I questioned why it should happen and why nothing was being done to rectify the matter.
I am informed by the O2 Service Dept that a memo highlighting the Number of people returning machines affected as mine, has been ciculating the offices of O2, and distributed to Dealers for the last week. Wouldn't it be easier to temporaraly remove the download or add a warning about screensavers, or is this just another way the Service Dept has to make money?
Once again Thank You
Re: You are a STAR Sir
ptopping said:
Thank you very much for your help. It is people like you that brighten up the dullest of Manchester days. Your advise worked a treat and saved me from returning, what was a paper weight, to the "O2 Service Dept" (who are subcontracted by O2). Why they couldn't have given me the same instructions I will never know.
Just to alert others to the incompetance of the whole system. Nowhere in the instructions does it tell you to switch off the screensaver, (I suppose with hindsite I should have checked it myself!!!).
I spent the best part of an hour on the phone being passed around different departments as I questioned why it should happen and why nothing was being done to rectify the matter.
I am informed by the O2 Service Dept that a memo highlighting the Number of people returning machines affected as mine, has been ciculating the offices of O2, and distributed to Dealers for the last week. Wouldn't it be easier to temporaraly remove the download or add a warning about screensavers, or is this just another way the Service Dept has to make money?
Once again Thank You
Click to expand...
Click to collapse
Thank you . To be fair though, until you had this happen, I never thought about the consequences of a screensaver activating. It is something I can add to the list of things to be aware of though .
From what I have read from different people on this forum, however, I agree that O2 support is sadly lacking in basic knowledge for these 'modern' devices, and one would now expect their installation instructions to contain the things they should have learnt from people like yourself. We will have to see .
You've poss heard this un afore. But so far .. this `un aint been resolved, readers. Just got me a XDA Exec and daftily `upgraded' the ROM to exactly the same one as already installed (d'oh!). Aye .. but what happened was that the process failed just as the installation ended .. wih a communication error. Twixt PC and XDA. When I came to reboot .. the unit .. he dead!. The only spark of life is to hard reset. Do this . and you get the bootlaodaer screen showing the Serial 1.oo logo and Press X to quit and 0 to restore. You press 0 .. it just flickers the wee Red power light fleetingly .. but .. he dead, man!. And heres where the quandary comes in .. if you connect up .. even whenin the Bootloader screen. the unit is not seen as owt .. and Windows says its not being recognised when you plug it in .. so ActiveSync wont work and the ROM Updater cant see it .. failing before even trying to install. So there we have it. The unit has no ROM in it. Like a PC without a BIOS. Kinda Catch 22. ITs a dead unit ... only shwoing any life when yu do the hard reset. Shows a Bootloader screen. So do a soft reset? You get a dead unit again. If ou take out the battery and put on mains power ... then the red charge light comes on PUt in the battry.. unit goes blank again. Someone said you can link two XDAs together and do it that way. Really? Then how?. And how DO you get the PC to see it as a XDA?. Most infuriatingn. So really hardware wise its pristine .. its a software thingy!. If you know or even know a man who knows .. then point him/her this way and lets get this baby (XDA EXEC) back to post - resuscitated state Please. Cheers y'all in anticipation and sorry if this subject has already bin solved. Ive seen like-letters but no actual `fix' .. personally I think its return to Taiwan and get their EPROMmer guys to look into it. Can you help?Ta Bruce E Bonuspoints
Think you can edit your post and at least separate it into paragraphs?
Just some curiosity. I'd be willing to help, but I'm too lazy to read it like that.
If you bootup the XDA without the usb cable connected, when it goes into bootloader mode, it should say serial, if you then plug the usb sync cable, it should change to usb on the screen.
at this point, you want to run the rom upgrader software, it might take more than one try to get it to do the biz, I know, cause it took me three times via the sync cable when I tried to upgrade the rom via bluetooth (a mistake I won't be doing in a hurry ), thinking the cable connected was the usb sync cable and not the mains cable.
this might be of some help too http://forum.xda-developers.com/viewtopic.php?t=36115
p.s. take a deep breath and don't panic.
*edit* also found this, which might also help http://forum.xda-developers.com/viewtopic.php?t=37135
Exact thing happened to a friends JASJAR, this is what happened:
1. Same as above and it seems it corrupted the USB drivers so:
1.a. removed the USB drivers in device manager
1.b. rescanned for hardware changes to reload new USB drivers
2. Have to uncheck USB in ActiveSync Connection Settings
3. Hard reset your Universal till SERIAL shows
4. Plug the Universal and wait for SERIAL to change to USB
5. Unpack the ROM update to a directory
6. Delete all .nbf files except Radio_.nbf
7. Run the update (this will update radio only)
8. after Update, Hard reset ( __ + __ + Reset hole)
9. this should revive your Universal.
Then you can update normally again.
Don't forget to re-check USB in ActiveSync connection settings to enable active sync to work
Goodluck.... Just update us
Cheers for the responses .. EXEC lovers!. And sorry about the non-presence of paragraphs to the reader who doesn't like long sentences.. but thats nonstop streams of conscienceness f'yuz!
There .. happy now?. :twisted: Right .. will now nip off and read the links and take up the advice of the chaps who jolly well had the good decency to reply .. I'll let you know .. soon! Here goes, Ronnie! ...... :shock:
Cheers for the responses .. EXEC lovers!. And sorry about the non-presence of paragraphs to the reader who doesn't like long sentences.. but thats nonstop streams of conscienceness f'yuz!
There .. happy now?. :twisted: Right .. will now nip off and read the links and take up the advice of the chaps who jolly well had the good decency to reply .. I'll let you know .. soon! Here goes, Ronnie! ...... :shock:
:lol: Thanks to Messrs. WYTEY and in particular Mr. Jorgee ... MY XDA EXEC has risen from the dead! Thats right .. its back!. I WAS going to write and say it no go from Serial to USB ... mister!. But then tried it on missus's laptop .. it gets recognised.. but not on daughter's PC. Why Winston?. Then d'oh!. And Double D'oh!. The USB cable I am using is off an old memory card reader .. which cable is probably a bit crap. So I used the dedicated one... and .. voila! Back to life .. using the Radio ROM only. Tried the full install .. it no want to know .. back to lifelessness. Tried again .. this time its full and happy as it were. So once again great thanks directed to the Johnny JORG bloke and the WYTEY William whoc came to my assistance. You have just got me £500 of kit back!. I am writing to the Queen to see if you can both be knighted. I am also Royalty .. at least I think I am .. only today I cut this bloke up at a junction in my car and he called me a `Count'!. CHEERS YOU XDA HEROES!!!!!!!!!!
:lol: no probs
Glad to have helped in the resurrection of your phone. This wasn't the first time so I was kinda familiar with the process. Good thing that it was recognized in the laptop. How about now? Does your computer recognize it? My friends USB port of the PC suddenly wento into UNRECOGNIZED USB DEVICE mode mid-upgrading. Don't know what caused the problem though.
The unit has the `hump' now and then but now for general file transfers the cheap cable works fine . .when you do serious stuff like ROM upgrades.. tis the official cable. So its being recognised now and ActiveSync is fine. I do have probs finding a decent PDF viewer.. ClearVue and Adobe still cant display/flow the pages right .. never worked on the Nokia 9500 either really... and also want to know if its poss to use the videocam in MSN Messenger Mobile? But now.. its fine. it works .. and the upgrade fully happy! CHeers again!. Now . .whens the next upgrade coming? :roll: Aye!
Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Me Too
I Have the same problem :-(
Me Too
I Have the same problem :-(
Ive noticed in your screen shot the active sync is trying to connect with the internet which will prevent you phone from making the call. To give a example .... if I was downloading a file using my universal and someone tried to call me they would get my mail instead of ringing as the phone is using the internet connection however as soon as the file downloaded the phone would break the internet connection and allow the call. Hope that made sense!
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
numanoids said:
I thought the service is supposed to interrupt the download if the phone rings as the primary function of the device is a telephone and secondary as a mobile computing platform.
Click to expand...
Click to collapse
That's what I always thought but even with my trusty old imate jam I found if I got a call as I was downloading say mail the call would not make it though, try downloading a biggish file then ring your phone number at the same time I bet it will not make it This as ALWAYS been the case btw - don't matter which rom you have. oh and this applies to gsm (2.5 gprs) only as 3G is a totally different ball game!
thx for all inputs but it happens even without activesync running ... it doesn't work again except by switching the phone off then on ... the most exciting part: u will never notice that your phone is frozen till you try to make a call :evil: ... this will make me to go back to the old rom
More observation on this issue ... I made a hard reset and started without any problems with the phone part ... I restored a system backup and all went well ... the phone issue appeared again when I paired my BT headset with the device ... this might mean something to do with the BT stack ... I believe it happens mostly during or after using the headset :?:
Any similar experiences ?
Biso007 said:
Hi folks ...
I face this problem with the phone many times a day. I can confirm it happens each time there is a failed call attempt (you couldn't make the call) ... the only way is to switch off the phone and turn it on again.
I thought it's something with RSU 1.09.00 but it happens also after downgrading to 1.08.00 ... so I think it has to do with the new ROM. It tells the signal maybe unavailable while you can see it is on the max level.
Edit: last observation ... it can receive SMS :?:
Any one faced this experience ??
Click to expand...
Click to collapse
Same Problem Here... I was going to downgrade to 1.08.00, but now I may not... Don't want to lose the speed increase, so don't want to downgrade ROM...
back again ...
I made another hard reset and staretd without any s/w installed for a week .. the phone seemed to be stable but with the same annoying BT disconnect issue ... the above issue started to appear again after installing some phone related s/w like Smart Filter and PZP ... I think the new Radio ROMs starting with 1.08 have an issue with such applications that would continously check on phone traffic or have OS hooks to catch some events ... this wasn't the case with Radio 1.02 or 1.03 ... I 'm thinking to get back to 1.03 since I got nothing from 1.08 or 1.09 except quick battery draining!!
Good evening .
I have been trying to solve a problem that i have with my o2 xda. The problem is that the Bluetooth device is not working, it won’t even start, and I tried to turn it on from the communications manager but nothing. I tried to turn it on from the settings/communications/Bluetooth/turn Bluetooth make it visible to devices, but also nothing.
It turns on when I soft reset the device a few times, than sometimes it comes back on with the Bluetooth on, blue light flashing, but I’m unable to get it to pair with any devices. Sometimes my laptop will pick up the signal for a few seconds, but it is not able to sink with device.
I have tried everything I could think of, even have done some hard resets but nothing.
Someone told me to do an Artemis reset. So I downloaded the 4.02 with cube zip that I found around this website, but since I have never done such a procedure, in fact this is my first time with windows mobile, so I didn’t want to mess it up.
I read in this forums that third party applications can cause sometimes this problems because of driver contamination , my device did have lots of extra apps so that could be the problem .
In any case I’m not an expert, not even close especially with this system, so any help / suggestions / diagnostics / instructions, will be greatly appreciated.
The device is an o2 xda with built in gps, running windows mobile 6.1.
ROM Athemis Touch 4.02 WWe
Rom date : 4/8/8
Radio Version : 03.08.90
Protocol Version : 4.1.13.52
CPU: OMAP850
Speed: 201MHz
Ram: 64MB
Flash Size 128Mb
Data Bus 16bits
Storage size 44.74MB
And if the best solution is to do this artemis reset, i will really appreciate some instructions on how to exactly do this task, and if there is any known issues of this procedure killing the phone? , since sometimes with this types of "resets / flashes” this type of devices sometimes dies! So any help will be appreciated.
Thanks a lot.
Hope Corporation .
Ps. IM STILL A LITTLE AFRAID TO DO IT, SINCE I HAVE NEVER DONE SOMETHING LIKE THIS BEFORE, AND I AM A LITTLE SCARED THAT I WILL SCREW IT UP EVEN MORE!... (DO YOU KNOW IF BY DOING THIS I WILL LOOSE THE WINDOWS MOBILE 6.1 THAT I HAVE NOW LOADED, AND IT DIDN’T CAME ORIGINALLY, ON MY DEVICE ? .. ALSO, MY DEVICE IS UNLOOK FOR ANY CARRIER.. WILL THE RESET HAVE ANY EFFECT WITH THIS?)
MY DEVICE IS GIVING ME NOW EVEN MORE PRBLEMS, IT FREEZES UP, WONT GET A PHONE SIGNAL, AND OVERALL FREEZES, TO THE POINT THAT I HAVE TO SOFT RESET IT TIME AND TIME AGAIN UNTIL IT WORKS… AND EVEN THEM, A SLIGHT MOVE, OR TO MUCH WORK, OR DON’T KNOW WHAT!!! CAUSES IT TO LOOS SIGNAL AGAIN … EVEN THE WIFI IS NOT WORKING PROPERTLY!!. SO I AM NOW REALLY! COMPELL TO DO THIS RESET, BUT
P L E A S E!!! I WILL APPRECIATE ANY ADVICE AND INSTRUCTIONS SO THAT I WONT MESS IT UP EVEN MORE. …
THANKS A LOT.
HOPE CORPORATION.
This should be in the Artemis Forum....
Anyways, don't worry too much about the Bluetooth problem, I had the same issues when I first got my phone (P3300). Once I flashed the ROM there was a significant difference with the phone. I am currently using Tom's Oops black ROM, there are a few small issues (like not seeing the OK button on a pop up window) but nothing serious. In fact I would go as far as to say that a "cooked ROM" is WAY better than the OEM ROM that you have. It was assembled by a user of the phone with speed and usability in mind. If anything these ROM chefs should be approached by the OEMs for advice & suggestions.
Now for the scariest thing ever: Your first ROM Flash. Mine was with the WM6 update so it wasn't as scary as it came direct from HTC. My second Flash was Artemis Touch full 4.0, it wasn't as smooth as I would have liked it to be, I recommend having two seperate copies of the downloaded rom. I had an ROM Error saying the ROM was invalid 6% into installation. All I did was download another copy and try again. It is really that easy. I recommend you download PPC PIM backup and backup before you flash or you will lose all sms's and contacts! Not a fun prospect.
My Artemis has 25mb free RAm and is running stable 247Mhz, this is an extremely good phone especially when considering the price.
Thank you for your advice....
Thanks a lot for your responce... and sorry for mi ignorance when it comes to windows mobile, but this
is mi first time with it.. I had always used symbian, but in any case....
I downloaded the Artemis_Touch_4[1].02_Full_with_4_sided_cube 54.2 MB, but to tell you the trouth, I dont
have the SMALLEST!! idea of how to do it at all!!!??
Should I just install this on my pc, and the instructions on how to do the reset trough the phone
will come on? or should I do something to my phone allow the reset ?
Also, you advice me the oops black room.. thanks for that.. but do you know from where, and what version
should I download? the only link/version I couls find if this : http://forum.xda-developers.com/showthread.php?t=401062
I will really appreciate a little extra help...
thanks a lot for your time, and I really hope to hear from you soon. ...
Hope Corporation.
PS/ what about the unlook phone deal? will this wont be affected in my device? since im ussing my device
outside a normal carrier... moviestar, ecuador. .. thanks .
Hi,
Im using unlocked T-mobile MDA pro 64mb phone with WM 6.1 (build 19960.1.1.8 TML)
The problem is that when I connect to GPRS, Internet explorer, outlook and most of the internet softwares (opera browser, google maps etc...) don't work. Internet explorer stops at loading. outlook says synchronization error. But, a few softwares like IM messenger, some trading software work fine. The problem occurs only when on GPRS. Everything works fine on wifi.
I have been facing this problem since I have unlocked the phone and flashed it for the first time. I have flashed for several times with various roms. initially it works but soon problem reappears. hmm.. Problem did not appear in WM 6.5 (but phone is hell slow. So, im forced to remove it). Further the problem is not network specific as I tried on various networks.
Guys please help me.. I searched a lot on internet and it seems like no one is facing this type of problem in the whole world except me
(Except this: social.microsoft.com/forums/en-US/windowsmobilephonesandaccessories/thread/64977e4f-c8ba-482a-9845-c1d80f88fd71/)
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Simon_WM said:
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Click to expand...
Click to collapse
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
naveensakhamuri said:
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
Click to expand...
Click to collapse
http://www.filebox.com/alhaque/3o6u8gdlfy6j
Also if you want to chnage the radio:
http://forum.xda-developers.com/showthread.php?t=600933&highlight=Challenge
thanks
Hi!
thnx for ur reply... I'm desperately waiting for it...
Any how I tried this... as usually it worked fine at the beginning and problem repeated again. The new development is that the application which I said to be working previously (IM messenger etc...) are also now working now...
Very much frustrated about this issue as I'm unable to find the background reason for it . Even the XDA forums cant help it....And the worst part is that warranty is not going to apply as I unlocked it..
Yet no solution...
info?
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
kalya said:
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
Click to expand...
Click to collapse
Hi
Thanks for your suggestions.
Im using airtel network. and all those settings are already set on my phone.
Yes. I accept that my problem is weird. Thats the reason why I'm unable to find a solution for it.
Yet... I'm testing by changing various roms and still no success.
every time the problem repeats on 2-3 usages of gprs.
When I use opera browser it says that "I have some problem in settings". What to do I've checked those settings for hundreds of times and further if there is a problem in connection settings then why the heck it worked for the first few times?
Some stupid suggestions
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
kalya said:
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
Click to expand...
Click to collapse
Hi
I did every experiment I can think of.... Including testing this sim on other phone or testing the other sim on this phone.
I even tried flashing the original T-mobile rom.
I also tried to find if the programs I install has something to do with the problem...but found none of it affects.
As you said it may not be a rom problem.
If it fails to work completely then I can guss some thing about the origin of the problem like rom or hardware or whatever...
As it is working well initially, I don't understand where exactly the problem lies...
have you done a doc-format? sometimes that can get rid of very peculiar problems.
-Jonny- said:
have you done a doc-format? sometimes that can get rid of very peculiar problems.
Click to expand...
Click to collapse
Hi
Is the process of using mtty and task 28 55aa command what you call doc-format (sorry for ignorance)?
Then I've already did it...
anyway thanks for your suggestion...
I think the real culprit is activesync. anyway I have to do some tests and confirm.
To clear my doubt I decided to conduct a small test. I factory reset my system for three times to check the gprs connectivity...
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc + pairing up + synchronizing problem reappeared.
second reset:
1. GPRS worked flawlessly.
2. On connecting to pc by pairing up problem reappeared.
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc without pairing up problem reappeared.
So, this strengthened my assumption that the problem is with active sync.
I cannot confirm so easily...
Further I would use my phone with out connecting to PC for 3-4 days and check if problem reappears.
Then I would check it by connecting to a different PC. Then I can confirm whether the problem is with active sync of my system or the phone...
By the way, today is the second day of my testing without connecting to pc and no issues detected till now
folks,
Today on the fourth day of my test, I conclude that connecting to my pc creates the gprs problem. No Idea how and why...
suggestions any one?
anyhow I would connect my phone to a different pc and check out if the problem is with my pc or with the phone...
no suggestions?
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
wovens said:
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
Click to expand...
Click to collapse
Hmm..Im sure that I deleted all the older files.. anyway let me I'll try this registry procedure... thanks for your suggestion