[X50V] ROM WM6.1 VOIP Professional (WWE/GER/ITA/ESN/FRA)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My First thanks to Maglite and Football. Maglite was the first to release a custom rom for the x50v, he was the one with Football to explain me about xip & xipport, when I registered to 4pda.ru. These roms were built using a derived kitchen from Football's kitchen.
These roms share the same kernel than the x51v's one and are directly derived from them. They are stricly for x50v, the one from the x51v are located here .
You can only flash your x50v with these roms, if your device is running WM5 aku 2.3.1 or higher. If you attempt to flash over a WM2003 bootloader, you will brick your device.
This rom is indeed a full professional rom, with this rom your x50v is not a PDA anymore, it will just become a real VOIP Pdaphone.
What is the difference between a x50v regular rom with a VOIP software (like Sjphone) and this WM6.1 VOIP rom?
Here are the main benifits once your axim is properly configured:
- You only need to turn on your wifi to place or receive VOIP call (You don't need to start any software because the VOIP is native on the OS)
- You can call directly from your contact
- You can import call log and dialed number from any other phone using PimBackup
- There are three way to check your PDAphone is connected to the VOIP network
1/ You can see the two network call bar from the top bar
2/ You can use the VOIP today plugin
3/ You can see your VOIP network from the phone application itself.
Also this incredible rom is available in 5 different localized version: WWE/WWE/GER/ITA/ESN/FRA
Status of these 5 roms:
Rom A09 PRO_VOIP (private "pure" edition):
WM6.1 Professional - CE OS 5.2.19965 (Build 19965.1.2.3) with "4.8 MB Pagepool"
And includes the following
-- Native VOIP support
-- Setup VOIP from Schap to configure your VOIP setup.
-- SDHC support
-- Outlook Enhancementsupport
-- WPA-TSK vagus fix.
-- NetCF 3.5
-- SQLCE 3.5 (Localized)
-- wireless manager, is there but tricky to use.
-- Softkey Applet (a powerfull applet that allows you to change your softkey without having to soft reset)
-- TCPMP 0.72 (Localized) with two different subtitle support (thanks will5 for the information about the new subtitle pluggin) and YouTube support (Subtitle support for SMI in video "Intel 2700G" mode and not in "Intel 2700G Decoder" mode)
It also includes avc, aac & ac3 plugin. TCPMP is an alternative to WM Player. File associations is availble in TCPMP settings
-- PIE 6.1 and YouTube plugin, scrolling can be done using directional button, PIE Ramdisk is available in Scripts & Tricks section (it uses ram for PIE cache to improve performance). About the YouTube Plugin, it works natively. If you surf on YouTube with PIE, when you click on a video a context menu will be displayed (see screenshot above). Then you will be able to save the video or to view it online through TCPMP.
-- DF's PIM Backup 2.8 (a replacement for Data Backup)
-- ModemIS, a string initialization modem utility.
-- 7-zip, if you need to extract 7z compressed files.
-- aximsite wireless switcher
-- screen capture, a simple screen capture utility (Not in German rom)
-- Notepad, a very usefull text editor.
-- GSFinder+, a replacement for File Explorer, this version has an High Resolution feature. I find this software more interesting than Resco Explorer because of this feature and also because it's faster.
-- ozVGA and WM6.1 trueVGA Localized dlls, to switch in TrueVGA mode (The German rom contains only the trueVGA dlls and not the trueVGA applet)
-- MortScrip 4.1
-- NoPluginsToday, a switcher to quickly de-activate all your plugin and re-activate them all. Plugin de-activation will boost your device.
-- MagicButton, so all application will close and release memory instead of being minimized (a replacement for switcher bar) (Not in German rom)
-- Ramdisk see "Menneisyys" article. These rom will automount a 3 Mo ramdisk with filesys.exe TempPath pointing to the ramdisk. Unmounting the ramdisk will autopoint to permanent storage, while mounting any ramdisk will automatically point the TempPath the the ramdisk.
-- Hibernate, a powerfull tool to claim unused memory.
-- UC ROM capability
The package contains the following UC components with the appropriate SDConfig.txt:
----- PocketRAR 3.80 (Localized)
----- DF's Task Manager / Registry Editor 3.1, a very good task manager embedding a usefull registry editor (with this software and GSFinder+, you don't need Resco File explorer anymore).
---- x51v Mix
---- Windows Live 10.6.39.1300
---- MagicButton (only in German package)
---- screen capture (only in German package)
with following registry tricks:
HKEY_LOCAL_MACHINE\System\ObjectStore\RegistryType=0 , (file based registry)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Navigation\"4-Way Nav"=0
Compaction thread :
One of the best way to fight against compaction thread is to reassign all temp files to ramdisk. By default, this 4.8 pagepool rom will autoload a 3 Mo ram disk and ensure more than 30 Mo of free memory to run the programs. You can easily unmount or change the capacity of the ramdisk using the preconfigured features located in program files/ramdisks. Like mentioned before it will automatically point filesys.exe TempPath to the ramdisk. I also strongly suggest to use Pie_Ramdisk (in tips&tricks) instead of Pie.
Also if you want to check compaction thread behaviour with different pagepool values, you can use Paveld PPeditor. (Thanks Paveld & wllw from 4pda)
Instruction to use Paveld PPeditor
Kitchen from Football is available here.
Update: A09 VOIP Gold release
It's more like a dking special, those rom have :
--a patched gwes.exe to avoid the display problem in menus (thanks to dking that was kind enough to explain me his tutorial published in russian in 4pda.)
--dking patched drivers for Axim's screen backlight on minimum brightness
(it should also fix the french menu displayed when trying to access YouTube from PIE)
Update 2: A09 VOIP Gold with patch filesys.exe release
It's the very same A09 VOIP Gold release, with a custom shsmith patch filesys.exe v6.3. I've use cook method highlighted by Menneisyys to generate those patch filesys.exe.
The patch is launched at startup and can be invoked also from Scripts & Tricks section.
Last Update: A09 523F release
WM6.1 VOIP Pro (21055) WWE only
This rom is build over the last WM6.1 build (dated september 2009) and have finger scrolling ability.
features:
--pure WM6.1 rom with only added screen capture utility, Mortscript, SDHC support, WPA-TSK vagus fix, Softkey Applet, aximsite wireless switcher.
--dking 2700G driver
--patched Wireless Manager
--The Pro rom has native VOIP all other WM6.1 bonus (except IE6 Mobile that is removed) could be installed by UC, but you have to get it from the x51v rom (Including My Phone and SkyMarket, and other bonus)
UC will install Office Mobile, and will kick with filesys.exe after reset, You'll have to wait 5 minutes to start benefit the full speed rom (when filesys goes down to 0% of cpu).
Tip for downloading from rapidshare: use jdownloader.
If you like these rom and you wish to donate.
If you are interested by the french rom please participate here.
Localized today screens
Some tricks related to VOIP part:
You can use up to two VOIP configuration. Using setup VOIP from Schap, you can create your 1st VOIP configuration.
Then go to \Windows\system\VOIP and duplicate the Prov1SIPSettings file to Prov1BackupSIPSettings. Re-use setup voip to configure your second VOIP configuration.
If you don't use headset, and you use the speaker and mike from the x50v (by using it up side down), reduce the speaker sound to avoid echoing.
Ahh, perfect! Just after I broke my LCD. Now I am more motivated to go to ebay and buy that LCD replacement.
[Solved:] Mine is giving error: Image checksum file not found.
Which rom are you trying to use?
WWE,
I have copied .nb and .crc both.
BTW, I use A09 (Lenny) edition.
Does WPA natively work?
TIA
biligee said:
WWE,
I have copied .nb and .crc both.
BTW, I use A09 (Lenny) edition.
Click to expand...
Click to collapse
Perhaps, you have too many files located in the SD root folder, try to only have those from the package.
Dividee said:
Does WPA natively work?
TIA
Click to expand...
Click to collapse
It should.
Thanks, Now it is working.
makuu said:
Perhaps, you have too many files located in the SD root folder, try to only have those from the package.
It should.
Click to expand...
Click to collapse
just now i'm flashing my x50v to the german version. I was using the 6.1 from LennySh A09 before, but WLAN was not working perfectly, as it did in WM5 and of course, it was english. I'm interested, how this rom works. gonna write about it then...
Well, played around with it and: i love you for making this rom completely german. (as from first post, i understood that only the home-screen should be german), anyway it's great! And reacts much better than the A09 WM6.1 from LennySh before. A really great Rom. (Is good that it's german, as i'm gonna sell this device, when i get my MDA Pro, which may arrive some time these days, And i think, it's going to sell more, if there's a german WM6.1 on it. Thanks for this rom!!
run fast but wifi works only whit wep ,wpa disconnect every 5 five second
caxio said:
run fast but wifi works only whit wep ,wpa disconnect every 5 five second
Click to expand...
Click to collapse
I have no problem with WPA TKIP. Keep connect and it is supported natively.
No on / off / on trick is needed.
Also, this roms seems lessen the filesys compaction problem, even the CPU loading at 624Mhz, it is still responsive.
new voip user
Can you recommend me on a good VOIP provider. so I can set my new x50v rom.
what VOIP provider are you guys yusing ?
where should I install programs
my congratulations, great rom! thanks for providing it!
I have just a one question:
do you recommend to install programs like agenda fusion to the device or to a sd card (concerning the filesys issue)
thanks in advance
Nice work! But what about troubles with filesys.exe 99% CPU use?
WPA doesn´t work. But the Rom is very nice.
Cya
the german rom seems to have bricked my x50v. i get memory errors when booting and cannot reflash the rom from sd card.
JoeBlob said:
the german rom seems to have bricked my x50v. i get memory errors when booting and cannot reflash the rom from sd card.
Click to expand...
Click to collapse
You might have bricked your axim if it was running WM2003 prior flashing with a M6.1 rom. There are stickies on aximsite that should help you recover in this case.
But remember that there is always a risk to flash your device it can always be bricked.
killert68i said:
Nice work! But what about troubles with filesys.exe 99% CPU use?
Click to expand...
Click to collapse
haven't noticed so far yet. (but don't care anymore, as i'm going to sell my X50v now, because i now have my HTC Universal.
btw @ EDITman
VOIP depends mostly on your ISP / internet provider. If you have DSL and a telephone flatrate, you might be able to use your home connection, as the telephone-connection goes over internet. (that's VOIP). I don't know, if you can use VOIP anywhere else but home.
Related
GM360.01b Hermes ROM with 4MB Page Pool + Other PagePool Sizes (6 and 8 MB)
##-##
Some screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What so special about this ROM?
Well, nothing special since I'm using the similar ROM (T-Mo 3.60 Beta) as my base ROM just like other cooks but ...
some programs are not cooked in. They are installed through Extended ROM autorun. So, if you feel that mine is bad or taking up spaces then you just can uninstall it/them and install yours. These includes HTCHome Today Plugin.
Also don't expect a large free storage like other ROMs around because I did not strip it to the max for stability purposes. Maybe one day I'll manage to make as big storage and stable as it can.
So, what's inside?
Animated Startup New
GSFinder+
Schen's Kaiser Style Dialer New
Task Manager/X-Button 1.5
CommManager Kaizer Black (10 Button)
PIM Backup 2.5
PocketCM 0.11b-SMS (Touch scroll capabilities) New
PocketCM Keyboard 0.7 New
IM Selector (Input Method Selector)
Clear Temp (Cleaning unneeded temps)
BaseHue Setting (So you can set your own BaseHue)
IBE Registry Editor
SAP Setting
Schaps Advance Config 1.0
vSnap 0.2 (Screen capture utility)
UPX4PPC 0.4.1
Schaps Setup VOIP 0.3
HTCustom 1.8 New
Bluetooth Explorer
Flashlight (Torchlight utility from Schaps)
HTC Voice Recorder 1.10
PeekPocket WIFI Scanner
WinXplorer
Parametric Equalizer (activated by wired headset)
Office 2007 including OneNote
Adobe Flashlight
Adobe Reader LE
GCalc Calculator (Replacing stock Mobilecalculator)
DrYAR Buletooth WM6 Version- Not included (Under testing)
Pocket RAR 3.60
CKE Text Editor
MyTheme.tsk (I'm a fan of Spiderman)
Network Wizard with auto detection (from Dopod Official - Asia Pasific) New
ATIFix dlls cooked in
TCPMP 0.81 (with FLV and Windows Media Plugins) New
VOIP
You can install apps from Dopod
Section A:
-----------How to upgrade?
Method 1: You must've installed the Ollipro's SPL 2.10 and select the option no. 4 which is
" SPL-2.02/2.10 New Bootloader and check the last check box " Is it Hard-SPL?" and then carry on with the upgrade wizard.
or
Method 2: Use SSPL when upgrading by checking the 5th radio button " Force using SSPL"
But I prefer the first method to the 2nd one.
Happy upgrading....
MegaUpload
Rapidshare
MediaFire
Some Add-ons:
Network Wizard Alternative - For users who having trouble setting their network config from other parts of the world besides Asia Pasific.
***********
Section B: Setting PagePool size before you upgrade! (No need to Hex edited it yourself) How To ...a simpler way
----------------------------------------------------------
1. Download the GM360.01b-nbh.zip below and extract to any folder you like.
or
If you already downloaded the file GM360.01b.exe then open it with Winrar and extract the files to any folder you like.
2. Download and execute the proper patcher in the same folder you extracted the NBH and RUUWrapper.exe files (Download below). If the patching success then ...
3. Run RUUWrapper.exe to install the ROM on your device as instructed in Section A.
**Attention: Never!, I mean 'never!' run my patch on other Cooks' .nbh files. It will brick your device!
LINK for GM360.01b-nbh.zip:
MegaUpload
Bugs And fixes History:
29.08.2007
(07.30pm) Uploading PagePool Patchers to www storage
28.08.2007:
(12.30am) link at MegaUpload updated
(12.12am) Uploading to Megaupload
----
Some simple tricks you can do to improve your device (Very simple but effective) And Some Hints:
1. Improve performance/response time:
- Start > Settings > Phone > Keypad = Off
- Start > Settings > Sounds & Notifications; Under Sound Tab => Disable/Untick Events (warings, system events)
2. Your Windows Mobile device is just like your Windows PC. So, soft reset it before going to sleep (or whenever appropriate) once a day to make it runs good at all time.
3. Make sure you install the today plugin apps such as Resco Today Plugin etc. on the internal/device memory. Some today plugin can be installed on the storage card but it'll slow down your system performance a bit.
4. Do not install too many apps on the internal/device memory. Leave as much free space as you can on it. Check whether it can be install on the storage card or not. Normally, don't let it become as low as 8MB free but 10MB is enough already.
5. Know what you're doing such as tampering your system registry. Make sure it can be done and you're doing it the right way. If not, then leave it as is.
MegaUpload Link pointer updated. See first post.
cyphol said:
MegaUpload Link pointer updated. See first post.
Click to expand...
Click to collapse
Thanks for this new version...
Only one question for you, what CABs are in the extended ROM and what soft are cooked in the ROM?
Regards.
TouchFLO
Hello,
Does anyone know if there a TouchFLO Rom for 8525? I tried the other once and they don't work.
Many thanks
jcespi2005 said:
Thanks for this new version...
Only one question for you, what CABs are in the extended ROM and what soft are cooked in the ROM?
Regards.
Click to expand...
Click to collapse
These apps are install from Extended ROM:
Schap's Advanced Config
Clear Temp
ActiveSync WLan Fix
HTCHome
PCM Keyboard
Setup VOIP
UPX4PPC
WinXplore
Dopod Official Network Wizard
Tcpmp
*** You can delete all of them once they installed correctly on first boot, except the Schap's Advanced Config and Schap's VOIP Setup as they're installed on the partition.
Others are cooked in.
barojaan said:
Hello,
Does anyone know if there a TouchFLO Rom for 8525? I tried the other once and they don't work.
Many thanks
Click to expand...
Click to collapse
Not completely ready for Hermes just yet.
I'll be answering other questions (if there's any) tomorrow. I'm off to bed.
MegaUpload updated waiting 258 minute. Creepiness.....
its a superb rom mate, except t-mobile uk settings not working and when i use other internet settings mate, it dont work
biggary said:
its a superb rom mate, except t-mobile uk settings not working and when i use other internet settings mate, it dont work
Click to expand...
Click to collapse
Yes I Knew about it. I'll package T-Mo components seperately in the future so there won't be any issues alike.
biggary said:
its a superb rom mate, except t-mobile uk settings not working and when i use other internet settings mate, it dont work
Click to expand...
Click to collapse
Try this alternative network wizard app.
Net update will be uninstallable Dopod Network Wizard (Asia Pasific) so other users from other parts of the world can have their network setting by installing the alternative wizard.
Hi
anyone have uploaded to rapidshare?...I cant download from Megaupload
yeah me too... megaupload sucks.. i dont want to have to install their toolbar just to download from them.
DaVince said:
yeah me too... megaupload sucks.. i dont want to have to install their toolbar just to download from them.
Click to expand...
Click to collapse
I'll upload it to Rapidshare if nobody does it for me later.
With thanks to cyphol, I'm uploading it to Rapidshare
cyphol said:
I'll upload it to Rapidshare if nobody does it for me later.
Click to expand...
Click to collapse
My little daughter also like spiderman, and this rom is very clean, which I have been looking for.
But, settings->connection is extremely slower than any other roms.
robotician said:
With thanks to cyphol, I'm uploading it to Rapidshare
My little daughter also like spiderman, and this rom is very clean, which I have been looking for.
But, settings->connection is extremely slower than any other roms.
Click to expand...
Click to collapse
Hmm... I have to look at it. Thanks for the comment. Anyway, say "Apa khabar? (It's how we say "How are you?" in Malay) to your daughter.
what are differences from TNT 2
Goog Job,keep going,,,,Kawan.
Rapid share links
Finally, I have uploaded it to rapidshare.
http://rapidshare.com/files/51980592/GM360.01b.exe
robotician said:
With thanks to cyphol, I'm uploading it to Rapidshare
My little daughter also like spiderman, and this rom is very clean, which I have been looking for.
But, settings->connection is extremely slower than any other roms.
Click to expand...
Click to collapse
muskangul said:
what are differences from TNT 2
Click to expand...
Click to collapse
Mine is based on T-Mo 3.60 Beta which is the latest ROM available whereas TNT 2 is based on Dopod 3.54 Official. I like Dopod too. So you can make a choice whether you want a customized ROM based on either one but try first and compare later. TNT is cooked by a very experienced cook. So I don't dare to compare mine to his.
Note:
After Flashing the PDA section. PLEASE Soft Reset Once to recalibrate the Operator and Phone Settings
V5 Kitchen Released 17/10/2008
Download
Extract Kitchen contents to your PC
Copy a bin file into the folder and name it i780.bin (first time only)
Run CreateDump.bat (first time only)
DELETE the Dump folder that has been created but leave everything else intact
Modifications to the rom are done manually in OEM and SYS Folder
To cook the rom, run 1_Reloc.exe -> Do It!
Then run 2_BuildOS.exe to prepare \Temp\Dump Folder
If there's no error encountered, move the \Temp\Dump folder to the main area
Now run RecreateBin.bat and then ConvertNb0ToBin.bat
The new flashable bin is ready for use
This kitchen assumes that you are familiar with modification of rgus and xml files (please do research in XDA forum for hints)
11 October 2008 - V5X PXIHH5 Series
V5X Support Cabs:
MMS Fix Cab for all V5X Series Download (Require Soft Reset)
All Cabs Collection (from DXHH1) Download
V5X 96DPI Standard:
Download Here
Based on ITA PXIHH5 PDA Rom
Opera, RSS Feed, Podcasts, MP3 Ringtones, PhotoSlides, Video Player, Adobe FlashLite & CNN Removed
SYS Section uses Official WM6.1 Pro 20273 Build from HTC Diamond
OEM Section uses PXIHH5 100%
96DPI components from HTC Kaiser official rom
No additional apps or tools included (plain Vanilla)
Windows Live from PXIHH5 used
NetCF 3.5
Selection of multiple messages enabled
Uses Batteryand 3G indicators with percentage
Standard Samsung i780 apps retained
Bluetooth OBEX Fix
SDKCerts (2) already installed
Performance & Security tweaks
MMS Fix Installed
V5X 128DPI Standard:
Download Here
Based on ITA PXIHH5 PDA Rom
Opera, RSS Feed, Podcasts, MP3 Ringtones, PhotoSlides, Video Player, Adobe FlashLite & CNN Removed
SYS Section uses Official WM6.1 Pro 20273 Build from HTC Diamond
OEM Section uses PXIHH5 100%
No additional apps or tools included (plain Vanilla)
Windows Live from PXIHH5 used
NetCF 3.5
Selection of multiple messages enabled
Uses Battery (four bars) and 3G indicators from official Samsung SCH-M480
Added Samsung Menu Launch from PXIHH5
Standard Samsung i780 apps retained
Bluetooth OBEX Fix
SDKCerts (2) already installed
Performance & Security tweaks
V5X 128DPI Ultimate:
Download Here
Based on ITA PXIHH5 PDA Rom
Opera, RSS Feed, Podcasts, MP3 Ringtones, PhotoSlides, Video Player, Adobe FlashLite & CNN Removed
SYS Section uses Official WM6.1 Pro 20273 Build from HTC Diamond
OEM Section uses PXIHH5 100%
Windows Live from PXIHH5 used
NetCF 3.5
Selection of multiple messages enabled
Uses Battery (four bars) and 3G indicators from official Samsung SCH-M480
Opera Mini 4.1 & Esmertec Java (Required)
moneytoo's Samsung Backlight
Tweak Cabs for i780
Adobe Reader LE, Microsoft eBook Reader, Latest Pocket RAR
TCPMP Core Player with FLV Support, Youtube Play
Bluetooth OBEX Fix
SDKCerts (2) already installed
Performance & Security tweaks
Vicott Keyswop ClearTemp 1.1 (updated), Total Commander 2.51 (updated), Modaco NoData, Dotfred PIM Backup, PsShutXP, WM Tool (added new), Synchro Time, PHM Regedit, Pocket Tweak CPL, Zinyee Notif Blinker, HTC Comm Manager, Schap Advanced Config 3.1
V5X 96DPI Ultimate:
Download Here
Based on ITA PXIHH5 PDA Rom
Opera, RSS Feed, Podcasts, MP3 Ringtones, PhotoSlides, Video Player, Adobe FlashLite & CNN Removed
SYS Section uses Official WM6.1 Pro 20273 Build from HTC Diamond
96DPI Components from Official HTC Kaiser SYS
OEM Section uses PXIHH5 100%
Windows Live from PXIHH5 used
NetCF 3.5
Selection of multiple messages enabled
NEW Battery (Percentage) and 3G indicators
Opera Mini 4.1 & Esmertec Java (Required)
moneytoo's Samsung Backlight
Tweak Cabs for i780
Adobe Reader LE, Microsoft eBook Reader, Latest Pocket RAR
TCPMP Core Player with FLV Support, Youtube Play
Bluetooth OBEX Fix
SDKCerts (2) already installed
Performance & Security tweaks
Vicott Keyswop ClearTemp 1.1 (updated), Total Commander 2.51 (updated), Modaco NoData, Dotfred PIM Backup, PsShutXP, WM Tool (added new), Synchro Time, PHM Regedit, Pocket Tweak CPL, Zinyee Notif Blinker, HTC Comm Manager, Schap Advanced Config 3.1
Original Unmodded WM6.1 PXIHH5 Italian PDA ROM 128DPI
Download
100% unmodded WM6.1 Build 20270 (Nothing Removed)
Bugs on ringtones and picture viewing fixed
V4X.Uf (Ultimate) FINAL Release
Download * This is the final release for V4X Series
Based on WWE DXHE1 PDA Rom 96DPI
Opera, RSS Feed, Podcasts, MP3 Ringtones, PhotoSlides, Video Player, Adobe FlashLite & CNN Removed
SYS Section uses Official WM6.1 Pro 20273 Build from HTC Diamond
96DPI components from HTC Kaiser 19212 Official ROM
OEM Section uses DXHE1 100%
Windows Live from PXIHH5 used
NetCF 3.5
Selection of multiple messages enabled
NEW Battery (Percentage) and 3G indicators - Fixed 3G/Wifi icon swap issue
Opera Mini 4.1 & Esmertec Java (Required)
HTC Home V2 & Black Clock
Nadavi Modded 3G Dialer
moneytoo's Samsung Backlight
Tweak Cabs for i780
Adobe Reader LE, Microsoft eBook Reader, Latest Pocket RAR
TCPMP Core Player with FLV Support, Youtube Play
Bluetooth OBEX Fix
SDKCerts (2) already installed
Performance & Security tweaks
Vicott Keyswop & ClearTemp, Total Commander 2.51 (updated), Modaco NoData, Dotfred PIM Backup, PsShutXP, WM Tool (added new), Synchro Time, PHM Regedit, Pocket Tweak CPL, Zinyee Notif Blinker, HTC Comm Manager, Schap Advanced Config 3.1
Flashing Guide [CLICKME]:
* Please SOFT RESET the phone once after the first boot to recalibrate the Phone/Radio or else the Operator Settings and Version will not display correctly.
Windows Vista Mirage Updater Guide [CLICKME]:
Screenshots of 5X Series:
V5X 128DPI Standard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V5X 128DPI Ultimate
Please check the attachments for additional download links
CREDITS:
This was made possible due due to the following folks: famusc, Topogigi, xmen06, chaimd (the GURU), The Solutor, Nadavi, gravner, g00ndu, Tomal (for cooking inspiration & rom components), Vibranze, Dogmood, Eunjea, monyozt and those who have contibuted with valuable feedbacks (you know who you are).
Those who have donated drinks to me, a BIG THANK you for your support, your donations has made it worthwhile for me to continue working on this i780 rom beyond my personal use
PS:
If you find my work useful and feels like buying me a drink, please Click HERE
thanks a lot!
great job ~
Shafa! GREAT, im downloading tks very much
Thanks guys
Mirror at Rapidshare:
http://rapidshare.com/files/130599980/i780_WM6.1_EFN.bin.html
Thanks a lot.
thank a lot and great job. try now.
Is this possible?
Well then, somebody made my weekend!
People, any experiences with the rom, feedback!
small suggestion; some links arent not working, maybe you want to change that.
but this rom not support chinese display and input. too bad, this I needed. rolled back to HE1.
Great Job! flash now.
*offtopic* why should it samsung so long for an update. Because now some l33t had build his own. Like Samsung has 69^69 people working at samsungmobile and he does it all by it self. Ofcourse it has te be tested and perfected, but the bugs above shouldnt be that difficult for samsung to fix.
Sometimes I wonder... if they dont let us do their work, and then wake uP
Great Job man!
One question since this is my first rom upgrade on the i780 (i have made hundreds on other devices my on the I780 is the first). Can you upgrade the rom on isp sim locked phones? withou bricking it? .... I know i know warranty issued...bla bla bal... but does it work?
Thanks
João Oliveira.
I cant seem to change the theme for windows wmobile.
Will flash today... and THANK YOU for making this possible !!!!
(Please PM me if you believe you deserve a credit)
I will give a try asap.
thanks.
For me posts like "thank you" "great" are useless, can't you just flash rom and then thank and write your opinon? whole page one and two of this topic expect 2 posts are spam.
Ok, i just install this rom. in my opinion is little bit faster than original E1 rom, it has installed htc home and htc comm manager witch are working very good. You can add or remove tabs from htc home. Autopairing with bluetooth devices work, sync via bt also works.
Bugs i've found (just like EFS writes):
1. misplaced pop up baloons
2. Alt and Shift indicator not shown on the bar
3. task manager from settings have no icon
4. Samsung themes dosen't work
But these are small, and you can live with it
Thank you EFS for your work, i'm actually not switching back to orig E1 rom, your seems to be faster and maybe it will not have bugs that old E1 have
You are the best "chef" in the world. Everything works like a charm...
Native threaded sms at last.....
Thanks m8.
J-A-J-O said:
For me posts like "thank you" "great" are useless, can't you just flash rom and then thank and write your opinon? whole page one and two of this topic expect 2 posts are spam.
Click to expand...
Click to collapse
You are kidding, right? The guy spent trillion of hours to make this rom, if we don't thank him, who will? It's to early to find any bug, let some days of daily operation and someone will post back....
Great Job! thank you
Wow, great job. It worked perfect even for a noob like me=)
But i have some questions.
Will Tomtom work without any 3rd party programs?
Is there a way to change the y and z buttons?( German keyboard )
oh i cant download the files (links not work)
(0) Download Mirage Updater from http://rs227tg2.rapidshare.com/files...ge_LV_v1.8.rar
(1) Download the Russian ROMS from http://rs346gc2.rapidshare.com/files...l/i780PUHE1.7z
can help anybody ?
ssr
[X51V] ROM WM6.5.1 VOIP Professional (WWE, ESN)
My First thanks to Football. He was there to answer some questions when I was starting learning cooking for the x51v. I also want to thank Dking for providing the new 2700g drivers and DA_G for the WM6.5 builds.
This thread is actually a continuation of this one, where I have released some WM6.1 private professional rom for the axim.
This rom is indeed a full professional rom, with this rom your x51v is not a PDA anymore, it will just become a real VOIP Pdaphone.
What is the difference between a x51v regular rom with a VOIP software (like Sjphone) and this WM6.5 VOIP rom?
Here are the main benifits once your axim is properly configured:
- You only need to turn on your wifi to place or receive VOIP call (You don't need to start any software because the VOIP is native on the OS)
- You can call directly from your contact
- You can import call log and dialed number from any other phone using PimBackup
- There are three way to check your PDAphone is connected to the VOIP network
1/ You can see the two network call bar from the top bar
2/ You can use the VOIP today plugin
3/ You can see your VOIP network from the phone application itself.
Status of the roms:
Rom (5C0B) 5.2.23563 WM6.5.5 com5 branch : PRO release
A11: WM6.5.5 PRO (23563) WWEhttp://rapidshare.com/files/385083548/DiAd_K_AximX51v_WM65_A11_5C0B_WWE_pro.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the A11 final concept with optimized themes for file system performance improvement.
features:
--IE6 Mobile
--native VOIP
--Showcase.
--hibernate.
--screen capture.
--dking 2700G driver
--patched Wireless Manager
--TCPMP with finger friendly skin
-- Default theme (stylus UI) for low memory consumption (a lite version of the original Rock and Republick black theme)
--Titanium weather & wireless pluggin (via UC)
--Office 2010 (via UC)
--FingerKB (via UC)
--file system optimized original WM6.5 Finger UI theme: DVF Green, Isaac Mizrahi purple, Rock and Republic black, Vera Wang Red (via UC)
--file system optimized Elcondor WM6.5 Finger UI theme: Condor GT Black Edition (via UC)
--All 6.5 Extra (via UC)
--a 450 Ko dking DKLogo slot, that you can use to customize the x51v Boot Logo with dking Dell Logo Utility. The slot is preloaded with default Dell boot screen, you can put a compressed image up to 450 Ko (to compare with the Dell original logo that weight 120 Ko compressed).
--This branch has magnifier feature and new contact management.
This rom have a default page pool value of 12 Mo
Trick: if you need more memory switch to default theme and inactivate titanium, when memory is not an issue just use a Finger UI theme & titanium.
Customize UC if you don't need all 6.5 components. You can also run this rom on a 64 Mo device but then change pagepool to 3.2 Mo and don't use all the 6.5 components refer to the lite thread and check memory consumption table. Compared to a classic rom this rom will use about 2 Mo more because it's a pro rom and runs VOIP phone processes. So If you don't need a pro rom, just take the lite classic 5C0B nb0 together with the 6.5 packages of this rom, you will then get a full 6.5 classic rom.
Roms (5A2D) 5.2.23547PRO_VOIP WM6.5.5 com5 ("Finger UI"): E01 release (special thanks to Shadrac)
E01: WM6.5.5 VOIP Pro (23547) WWE 4 Mo Extendir
features:
--12 Mo pagepool.
--both IE6 Mobile.
--dking 2700G driver
--patched Wireless Manager
--TCPMP with finger friendly skin (via UC)
--Titanium weather & wireless pluggin (via UC)
--Office 2010 (via UC)
--a 450 Ko dking DKLogo slot, that you can use to customize the x51v Boot Logo with dking Dell Logo Utility. The slot is preloaded with default WM6.1 welcome screen, you can put a compressed image up to 450 Ko (to compare with the Dell original logo that weight 120 Ko compressed).
--ThisPro rom have native VOIP plus all WM6.5 extra that can be installed using Shadrac PresetInstaller (so you can actually have a full WM6.5 rom in your axim)
To know more about the incredible Extendir feature read this thread.
At first boot both rom will installed the mandatory package via UC (be patient during this phase), at second boot PresetInstaller will be automatically launched so you can install extra package using preselection or chosen by yourself.
It means that if you want to hard reset your device you need to have you SD card to installed the mandatory packages. ( or your system won't be stable).
Extendir roms have been tested with older French builds, those roms perform better but might conflict with other softwares (and then become unstable).
If you don't want extendir and you have a 128 Mo x51v, you can use the A11: WM6.5.5 Classic lite(23547) WWE romhttp://rapidshare.com/files/372747495/DiAd_K_AximX51v_WM65_A11_5BFB_WWE_lite.zip and apply this packagehttp://rapidshare.com/files/372759098/Full6.5gui_for_5BFB_lite.zip to transform the WM6.5 lite OS into a regular one (You should also increase the pagepool value). Then you can check the WM6.5 extra from A11 Extended rom package to see if they are compatible.
Roms (5574) 5.2.21876 WM6.5.x com2 ("Stylus UI"): A11 pro & classic releases
A11: WM6.5.x VOIP Pro (21876) WWE
A11: WM6.5.x Classic (21876) WWE
features:
--both IE6 Mobile and PIE are available.
--dking 2700G driver
--patched Wireless Manager
--a 450 Ko dking DKLogo slot, that you can use to customize the x51v Boot Logo with dking Dell Logo Utility. The slot is preloaded with default WM6.1 welcome screen, you can put a compressed image up to 450 Ko (to compare with the Dell original logo that weight 120 Ko compressed).
Adobe Flash lite is only included in the classic rom. To add any other WM6.5 feature try to use A11 5A2D extended packages (however I haven't check the compatibility).
Roms (5A2D) 5.2.23085 PRO_VOIP WM6.5.1 com3 ("Finger UI"): E01 & A11 releases (special thanks to Shadrac)
E01: WM6.5.x VOIP Pro (23085) WWE 4 Mo Extendir
A11: WM6.5.x VOIP Pro (23085) WWE Extended
features:
--both IE6 Mobile and PIE are available.
--dking 2700G driver
--patched Wireless Manager
--a 450 Ko dking DKLogo slot, that you can use to customize the x51v Boot Logo with dking Dell Logo Utility. The slot is preloaded with default WM6.1 welcome screen, you can put a compressed image up to 450 Ko (to compare with the Dell original logo that weight 120 Ko compressed).
--Those Pro rom have native VOIP plus all WM6.5 extra that can be installed using Shadrac PresetInstaller (so you can actually have a full WM6.5 rom in your axim)
To know more about the incredible Extendir feature read this thread.
The A11 Extended rom is based on the concept used to build the E01 extendir rom but without the extendir feature. I've build it only for those that have 64 Mo ram x51v and also to be compare with the E01 ( performances ).
At first boot both rom will installed the mandatory package via UC (be patient during this phase that is especially long for the A11 rom), at second boot PresetInstaller will be automatically launched so you can install extra package using preselection or chosen by yourself.
It means that if you want to hard reset your device you need to have you SD card to installed the mandatory packages. ( or your system won't be stable).
Extendir roms have been tested with older French builds, those roms perform better but might conflict with other softwares (and then become unstable).
Check the bench results
Tip for downloading from rapidshare: use jdownloader.
Rom A10 (5A14) 5.2.23060 PRO_VOIP WM6.5.1 ("Finger UI"):
WM6.5.1 Professional - CE OS 5.2.23060 (Build 23060.5.3.0) with "4.8 MB Pagepool"
And includes the following
-- Native VOIP support
-- Setup VOIP from Schap to configure your VOIP setup.
-- SDHC support
-- WPA-TSK vagus fix.
-- NetCF 3.5
-- IE6 with Adobe Flash 3.1
-- DF's PIM Backup 2.8 (a replacement for Data Backup)
-- aximsite wireless switcher
-- screen capture, a simple screen capture utility
-- GSFinder+, an alternative to the OOTB file explorer
-- MortScrip 4.1
-- FingerKeyboard 2.1 (a replacement for MS Keyboard and a must for a "Finger UI" rom, more skins, keyboard and instructions here)
-- UC ROM capability (with New Windows Live package and his SDCOnfig.txt file )
(notifications bus solved)
Rom A10 (5A0D) 5.2.23053 PRO_VOIP WM6.5.1 ("Finger UI"):
WM6.5.1 Professional - CE OS 5.2.23053 (Build 23053.5.3.0) with "4.8 MB Pagepool"
Bug with notifications.
Rom A10 (5B74) 5.2.23412 PRO_VOIP WM6.5.1 ("Finger UI"):
Aternative rom (older build) but notification are OK also it includes new contact management (including icons).
You can use Paveld PPeditor if you want to change PagePool and generate a new crc file. (Thanks Paveld & wllw from 4pda)
Instruction to use Paveld PPeditor
To properly run these rom it's recommended to use a 128 Mo ram upgraded x51v.
If you like my roms and you wish to donate.
Localized versions status
ESN has been released.
Sorry I don't plan to cook anymore GER, ITA roms.
FRA in beta stage.
Tips & Tricks
-- Release a maximum of memory to use a WM6.5 rom with a 64 Mo x51v:
This trick comes from raynda:
1. Disable Titanium plugins - 1-3MB free RAM
2. Disable WM6.5 Start Menu via utak3r's QuickMenu cab *IMPORTANT* - The start button is now on the bottom of the screen, and the utak3r cab is designed for the previous version of WM6.5, there is no icon in the top left corner. However, QuickMenu is still there and still works and the default Start Menu is still disabled. Be aware though, the top taskbar slide menu (containing Wifi, Volume, Power, etc. options) will be disabled and a buggy box will appear if you tap on those icons.
3. To disable the phone drivers and free up 3-4MB RAM, you can do one of two things.
- Safest method - use a registry search program, such as SKTools, and search for the terms "cell", "voip", "phone", and "dialer", and delete the information in each entry.
- Not so safe method, but works and totally disables phone drivers - create a fake "cprog.exe" and copy over the default "cprog.exe" into the Windows folder. When you soft reset, the drivers won't load, but you will get an error message that "Cprog.exe" isn't signed. You can tap "ok" until the error message goes away.
4. If you don't use Bluetooth, IrDA, or GPS, these drivers can be disabled completely in the registry. To do this, go to HKLM>Drivers and empty the keys for the devices you want to disable. Don't delete the entries, but delete the information in the entries. (Example - don't delete "DWORD - Keep - 1", but delete the 1 from the DWORD. Some keys will regenerate themselves if you delete them entirely, but if you delete the information in the key, they will not regenerate.)
5. HKLM>System>GWE contains some DWORDS that can free up 1-2MB RAM as well, such as "EnableLayeredWindows".
Using these tricks, and totally disabling all Bluetooth references in the registry, I have reached 32MB free RAM. This also was done while still increasing the GlyphCache to 16384.
Another trick - setting the DWORD to "1" instead of "0" in HKLM>System>StorageManager>Filters>replxfilt DWORD "DoImmaculate" will free up a little bit of RAM at the cost of a slightly longer boot time.
Another trick - search the registry for all "Camera" entries and make sure that the entry for Camera is disabled. (DWORD value for Camera should be "0" instead)
Another trick - Set HKLM>Snd>Event>EventCache from 1536 to 0 or 1.
Some more tricks from mtal1:
here & here
-- Connect with wifi using WPA/TKIP+AES:
This trick comes from francky37:
When trying to connect with wifi using WPA/TKIP+AES, it keeps asking pass-phrase without successfully connect.
To solve this go to settings and force TKIP mode, once done it will sucessfully connect each time you'll try.
-- Black Glossy skin for WM651 (from francky37):
-- Sense clock widget and theme (from aneto):
Woot woot!! Awesome work, Makuu!
Wowwwwwwww this is fresh release. I should install now. Thank you makuu
makuu great let's try this rom is that promise much for our axim to download and try it for that
thanks
can check the link and asking for a premium account and tried a lot and you can not download or upload to another server without too much trouble.
greetings
maximum RAM
This is excellent makuu, thanks so much.
I am trying to get the most free RAM that I can and would like more details
on disabling the phone features.
Step 3 says to search for "cell", "voip", "phone", and "dialer"
Do I search for whole words only?
Either way there are quite a few locations found.
-What problems could result from using the 'fake' cprog.exe?
-Is there any chance of releasing a cab file to disable these phone drivers?
thanks again, I am grateful for your efforts
Step 3 says to search for "cell", "voip", "phone", and "dialer"
Do I search for whole words only? Yes, and when I did it, "regular expressions" was unticked. It's best to do this directly after a flash with no software installed so that you don't accidentally mess up anything with Skype or similar programs if you use them. I suggest also that if you do this, you check each search result before deleting anything. I haven't had any problems from doing this, but that doesn't necessarily mean everyone else won't.
Also, there is a mortscript entry in your Windows folder named "VOIP". Make sure to remove that from your startup items.
-What problems could result from using the 'fake' cprog.exe? You'll get an error message every time you soft reset telling you that the current "Cprog.exe" is not signed with a trusted certificate. You have to tap "ok" 4 or 5 times to get it to go away, and it's a bit annoying but if you can live with that or figure out a better way to create a fake "cprog.exe", then the phone drivers will not launch on startup, freeing up 3-5MB RAM.
-Is there any chance of releasing a cab file to disable these phone drivers? I can't speak for Makuu, but I think it might be tough, unless someone creates a dummy cprog.exe, signs it, and then creates a CAB package that copies that exe file into the Windows directory.
How I typically get 30-32MB free RAM with WM6.5
This is how I do it when I flash 6.5, but it isn't for everyone's usage. A big part of it is disabling all IR and Bluetooth drivers since I don't use them and they eat RAM.
1. Change Input Method options to disable all auto correcting and word suggestion.
2. Change Error Reporting to disabled and change the Cache DWORDS for Error Reporting in the registry to 0.
3. Change GPS Settings - Untick the box for "Automatically Manage GPS"
4. Install SKTools and delete all Bluetooth related services in the Services options, especially OBEX. Google the services that you can manage here and either delete or change to manual anything that you find you don't need. (But don't change "Notify", or you won't be able to install any cabs!)
5. Disable any drivers you don't use with SKTools, I always disable all IR, Bluetooth, Cell, SMS, SmartCard, and GPS drivers with SKTools, then I come behind myself and make sure that any registry entries for any of these things are blank. (Note - not deleted altogether, but blank.)
6. Install the utak3r cab to disable the start menu.
7. Install the nueNoBar cab which can be found here on XDA after installing the utak3r cab to completely get rid of the bottom taskbar since you don't need it an it eats about 1 MB RAM.
8. Search the registry for Camera entries and disable them.
Also
Also, I'm not sure if my logic is right on this, but I think that if one disables everything that I disable, they can get away with a smaller pagepool. If I strip down my OS like I just mentioned, I usually also lower the pagepool to 3.2MB as well, and that helps.
Also, there's a second DWORD (limit0 - 73728) in your GlyphCache that can be deleted.
this beta rom works until 31 December this is very good
Come again? (That's what she said)
FYI - If you don't want to pay for or use a cracked version of SKTools, you can do all of the things I mentioned above with dotFred's Task Manager.
I want to try
Can someone upload this rom to Megashare or Megaupload please.
Dark hanzo said:
this beta rom works until 31 December this is very good
Click to expand...
Click to collapse
You are right, the build I've used was timed bomb (It was not mentioned on the source). So I am reuploading a patched rom.
Long time no see...makuu
and thank you very much for your efforts!!
The patched rom has been uploaded.
makuu said:
The patched rom has been uploaded.
Click to expand...
Click to collapse
Hi Makuu. Thanks again.
Only one coment, I downloaded the patched version, but the DiAd_K_AximX51v_WM65pro_A10_5A0DWWEpriv.nb0 file has the same date (26/09/2009 11:07) than the non patched. It's ok?
BR
Hi, I've been working on this for a long time.
There's still room to improve, so if you know some ways to solve known issues or find some bugs, please give me feedbacks.
Disclaimer:
- I hold no responsibility for any damage to your phones.
Updated 19/Apr/2010:
Timebomb removed.
I find new builds quite unstable on G810, so I stay with 23529.
Download link:
http://www.mediafire.com/?j5mznjnm0jn
Features:
- Update Arcsoft MMS.
- Replace Jblend with Esmertec Jbed.
- Remove most built-in alarms and ringtones.
Issues:
- As described below.
Screenshots:
-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Useful Download:
- FlashTools: http://www.badongo.com/file/19455198
- Official HK WWE 6.1 ROM, in case you need to flash back. http://www.mediafire.com/?zywjgmw5wzm
How To Flash:
- unzip Flashtool and flash.bin in C:/Windows/Temp/ (note there are hidden files, it's better unzipped directly there)
- hold record button then boot your device.
- The engineering menu will show up, choose 9 to enter DSUU Mode
- Connect your device to PC (the screen should show "USB Initialization done")
- Run Device Software Update Utility.exe
- Have some patience, it just take few minutes.
* If you flash under Windows 7, set Device Software Update Utility.exe to Vista SP2 Compatible Mode. However, it sometimes doesn't work for me, so I still suggest to flash under Windows XP.
* Some people suggest to do a hard reset (Master Clean) after flashed. I don't know the differences, but you could do that if it makes you comfortable.
Tested Functions:
- A2DP Bluetooth earphone (Muse 802)
- Camera works, video recording works
- Video call works
- Autoconfig works
- Alarms works
- Wifi works
- SMS works
- GPS works
- GPS Accelerator works
- Sync with Windows Mobil Center ok.
Old Builds:
********************************************************
28/Jan/2010 Updated:
Just a minor update. I seem to figure out why the full version in previous version got longer incall delay.
Download Link:
http://www.mediafire.com/?mnnewuzyebh
Feature:
-SYS XIP 28205
-Office 2010 from 23518
-Dynamic Pagepool
-Remove only unneccesary modules like autoupdate and bug reports.
-Chinese character display locale supported.
Issues:
- Video call wouldn't end properly, it's 28205 build specific issue, will be fixed in the next release.
- As described below.
********************************************************
- SYS and XIP 23511 (I consider this branch more stable)
- Pure WWE http://www.badongo.com/file/19342158
- WWE with Chinese Support http://www.badongo.com/file/19342332
- SYS and XIP 28205
- Full, 8MB Pagepool: http://www.mediafire.com/?4wzunynb4q3
- Standard, 8MB Pagepool: http://www.mediafire.com/?djjnigmnmdd
- Standard, 6MB Pagepool: http://www.mediafire.com/?mojc4dnx3fo
- Standard, Dynamic Pagepool: http://www.mediafire.com/?wwqmodk2nnz
- Lite, 8MB Pagepool: http://www.mediafire.com/?iy4ry3jnnnn
- Lite, Dynamic Pagepool: http://www.mediafire.com/?zeyty1n2t0d
Known Issues:
- FM Radio doesn't work (so I removed FMRadio components)
- Call log fails sometimes.
* Workaround: Install "Magicall" http://www.mobiion.com/magicall.html
This workaround is originally posted by KS20 users.
* Note: Some say this is because of GSM driver reloaded. What I observed is cprog.exe reloaded after entering suspend for a while. I think the system somehow flushes cprog.exe on resuming.
Removed OEM:
- Picsel Viewer, Autoinstall(Toshiba UI, Virtual Keyboard), ImageToText,Camera frames, ImageEditor, Stream Player, Blacklist, FM Radio.
- Toshiba Theme removed.
What I've Done and Fixed:
- Incoming Call Delay after suspend reduced to one ring
- Do some modification in initflashfiles.dat
- Put some ugly low resolution icons in Accessories
- Recmod lots of SYS modules, it should make the ROM smoother.
Todo:
- Clean up unused registry keys from OEM.
- Clean up unused drivers in OEM.
- May remove autoconfig data, it make /Windows a mess.
Signal lost issue
Thank you very much for this long awaited 6.5-rom
It runs very well and everything works as expected except one thing: unfortunately, after about half an hour in suspense mode, incoming calls aren't recognized anymore so the "signal drops"-problem remains (I'm using the Full, 8 MB Pagepool ROM) .... strange: sms receiving seems not to be affected by this problem as long as I have testet it....Now I will return to the the standard dialer because I'm currently using PhonEx and I want to make sure that this problem is not software related...
(It's a bit time consuming to test this, because whenever you change something, you must wait about an hour while the phone is in suspense mode before you check it, to be sure that the problem is fixed (or not) )
johpro said:
Thank you very much for this long awaited 6.5-rom
It runs very well and everything works as expected except one thing: unfortunately, after about half an hour in suspense mode, incoming calls aren't recognized anymore so the "signal drops"-problem remains (I'm using the Full, 8 MB Pagepool ROM) .... strange: sms receiving seems not to be affected by this problem as long as I have testet it....Now I will return to the the standard dialer because I'm currently using PhonEx and I want to make sure that this problem is not software related...
(It's a bit time consuming to test this, because whenever you change something, you must wait about an hour while the phone is in suspense mode before you check it, to be sure that the problem is fixed (or not) )
Click to expand...
Click to collapse
I'll figure it out. Thanks for your information.
I think this problem is build specific, I saw some HTC chefs encounter the same problem in this build(with HTC dialers).
If this problem continue to exist in later builds, I'll try to include a dialer toggler in ROMs.
I can confirm that this problem is build specific: I'm using the default dialer now and the problem hasn't occured anymore....
I'd like to test this ROM...thanks for your effort.
How can I go back to original ROM in case I want to?
You can make a backup of your original rom as described here: http://www.portegeclub.com/forum/viewtopic.php?t=2108
I have created such a backup rom but I haven't used it yet so I don't know whether it will work or not.
gretarson said:
I'd like to test this ROM...thanks for your effort.
How can I go back to original ROM in case I want to?
Click to expand...
Click to collapse
What's your original ROM language?
I can upload the Hong Kong English Official 6.1 ROM if you need it. It's a pure WWE ROM.
Thanks for your hard working on G810 ROM
miss call is lost
you can try this。misscall no record and Signal lost。This progame have to install that .net35。This programe is workup system at five minute age。(sory my english not good)
reload gsm fix
Hi,
I think I have solved the GSM reload on my LG KS20 ROM.
Delete key
[HKEY_CURRENT_USER \ ControlPanel \ Phone]
"EventSoundCache" = dword: 1
By.
This is an awesome ROM! Very stable and quite fast. Great work!
Is posible in spanish
This rom looks great, I am spanish, can you translate this rom?
Hi,
I have a question. What the diffrent between full , std and lite.
iankang said:
- How to reloc nk.exe. I tried to do it with M'Reloc for nk.exe but failed to boot.
- Is it possible to recmod oem drivers to further empty slot0?
(I tried to recmod oem drivers, but it seems recmodded drivers didn't work properly)
Click to expand...
Click to collapse
Use it http://translate.google.ru/translat.../forum/index.php?showtopic=137276&sl=ru&tl=en
Hi everyone.
I cannot understand, why so much ROM versions. For example, diffrences in pagepool. It can be modified by using Advanced Config...
kosiek said:
Hi everyone.
I cannot understand, why so much ROM versions. For example, diffrences in pagepool. It can be modified by using Advanced Config...
Click to expand...
Click to collapse
Oh? I didn't know pagepool can be changed by software.
Anyway, not everyone knows how to do it, what harm could more versions do?
aries_shadowheart said:
Hi,
I have a question. What the diffrent between full , std and lite.
Click to expand...
Click to collapse
In Full version, I removed only error report.
In Standard version, I further removed some unneccessary stuff like ADC, Autoupdate, MSTag, Sample Music, Bing Search...
In Lite Version, I also removed Enterprise, IPSec, VOIP, Voicecommand, Transcriber...
In future releases, I'll release only standard version and Lite version.
strange... You donate me and have access to my ROMs and release own ROM??? only one word because I don't wanna be vulgar...thanks!
furen said:
you can try this。misscall no record and Signal lost。This progame is Traditional Chinese and have to install that .net35。This programe is workup system at five minute age。(sory my english not good)
Click to expand...
Click to collapse
Hello everybody!
Can you translate options of this script into English? And give us screenshot with it?
I ask for it because I have squares instead of the font on the screen
There are some options there, it is possible to turn on/off something...?
thx
camelio said:
strange... You donate me and have access to my ROMs and release own ROM??? only one word because I don't wanna be vulgar...thanks!
Click to expand...
Click to collapse
I saw both of ROMs(camelio's and this one), and I think, that's his own work. Camelio, you're not the only cooker for Toshiba G810. :]
You force people to "donate" you for your work, and I knew, thats sooner or later somebody will create his own, FREE firmware to TG810.
So: if you have no evidence, don't even try to shame...
@iankang:
In the ROM, there is much to improve. On my TG810, delay 'from incoming call to ring' is still about 3-4 signals.
Aha, it's very good job.
camelio said:
strange... You donate me and have access to my ROMs and release own ROM??? only one word because I don't wanna be vulgar...thanks!
Click to expand...
Click to collapse
You're right, and I regreted to donate.
You claimed to solve the problem with "same power consumption with 6.1"
It truned out to be just a dumb way, and it drain your battery very soon!
You can download my ROM and depack, and tell me which part is yours.
I cooked this ROM totally from original official ROM!
Asus Mypal A6x6 WM 6.1 Windows CE version 5.2.21057 (Build 21057.1.6.10).
This rom was successful tested on my Asus Mypal 696, the other models were not tested. I know Steven855 has made WM 6.1 for that device, but his rom and my are different. I prefer lite versions, because it's working faster and gets more memory storage than stock. Besides I’m testing my rom during the week and I didn’t find out any bugs or fails. Maybe you will find it.
WM 6.1 CE 5.2.21057 (Build 21057.1.6.10) Eng Lite by Greymen
Removed:
Autoupdate
Catalog
Enterprise
IPSECVPN
BrowsingIE
LiveSearch
SampleMusic
Transcriber
WelcomeCenter
RemoteDesktop
Powerpoint and Onenote
Calculator
WindowsLive
Almost all themes
Task Manager
Templates
Unnecessary icons
Card encryption
Some OEM part (Restore Settings, Remote Presentor, Skins for Asus Player)
Added:
Page Pool 4 mb
Compression XPR
Cleaned XIP
NetCF 3.5
AsusStatus
Mode Switcher
Games
Necessary certificates.
Charge of the battery in the upper bar in percentage
To disable ActiveSync check Manually scheduling in settings
Some tweaks of registry
Dummy SQM and FWUpdate
Disabled welcome screen
ClearType is on.
Some notices:
1. After update you have to make Hard-reset.
2. Choose COM5 hardware port in External GPS
3. All wireless interfaces and GPS were tested and work well.
How to update (for Windows XP):
Download the archive and unpack it.
Connect your pda to PC.
Hold down the power button and enter button (that's the button in the center of the d-pad) and tap the soft reset button while holding the other 2 buttons.
Keep the other 2 buttons hold until a blue screen comes up that says USB connected Waiting for download (boot mode).
Then start the USBUpdate.bat and press any key.
Wait until the process is finished, in the end of it your pda will reboot on its own.
Link for download https://yadi.sk/d/QNLh-Gmmr5w9M
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Many thanks to Barin for the great tool OSBuilder and Judas Priest (for creating atmosphere while I did cook the rom).
Two problems on my 696
I tried it and I really like to minimal version.
Two problem thought:
1. The wifi keeps on disconnecting
2. On the messages, I couldn't open a single message, I see the mail list and can delete, mark, etc but can't open it.
In general, not bad.
Greymen said:
Asus Mypal A6x6 WM 6.1 Windows CE version 5.2.21057 (Build 21057.1.6.10).
This rom was successful tested on my Asus Mypal 696, the other models were not tested. I know Steven855 has made the 6.1 rom for that device, but his rom and my are different. I prefer lite versions, because it's cleaned from Microsoft's junk. Also user gets more memory storage. Besides I’m testing my rom during the week and didn’t find out any bugs or fails. Maybe you will find it.
WM 6.1 CE 5.2.21057 (Build 21057.1.6.10) Eng Lite by Greymen
Removals:
Autoupdate
Catalog
Enterprise
IPSECVPN
BrowsingIE
LiveSearch
SampleMusic
Transcriber
WelcomeCenter
RemoteDesktop
Powerpoint and Onenote
Calculator
WindowsLive
Almost all themes
Task Manager
Templates
Some OEM part (Restore Settings, PowerPoint Presentation, Skins for Asus Player)
Additions:
Page Pool 4 mb
Compression XPR
Cleaned XIP
NetCF 3.5
AsusStatus
Mode Switcher
Games
Removed unnecessary icons
Removed card encryption
Included necessary certificates.
Charge of the battery in the upper bar in percentage
To disable ActiveSync check Manually scheduling in settings
Some tweaks of registry
Dummy SQM and FWUpdate
Disabled welcome screen
ClearType is on.
Some notices:
1.After update make the Hard-reset.
2.In External GPS choose COM5 hardware port.
3.All wireless interfaces and GPS were tested and work well.
4.I don’t planning cook other language ROM’s even Russian.
How to update (for Windows XP):
Download the archive and unpack it.
Connect your pda to PC.
Hold down the power button and enter button (that's the button in the center of the d-pad) and tap the soft reset button while holding the other 2 buttons.
Keep the other 2 buttons hold until a blue screen comes up that says USB connected Waiting for download (boot mode).
Then start the USBUpdate.bat and press any key.
Wait until the process is finished, in the end of it your a6x6 will reboot on its own.
Link for Download http://uploaded.to/file/lakrr9
Many thanks to Barin for the great tool OSBuilder and Judas Priest (for creating the atmosphere when I did cook the rom).
Click to expand...
Click to collapse
Ah, some competition, I see. Anyway, I'm curious to know what reg fixes you put in there. I am also eager to know if you have found some way to fix gapi (I've been waiting forever for a fix so my gameboy emulator can finally work on my A626). A third thing I would like to know is where the (hex) location of the pagepool is (I've tried to find it, but I really haven't had the need to change it). Just to let you know, XPR is the default compression that the stock rom uses. It would also be better if you were to distribute an img file rather than a nb0 file, as an img file is what is usually used for flashing roms on the A6x6.
Sorry for the late answer.
xconir I use Zyxel p330 and have no disconnecting. I can't say about messages because I don't use e-mail on the PDA.
Steven855
Tweaks:
Enable lowbatt notification
Enable lookup words
Disable security notification when a program is being installed.
Not very big deal in a word
I use the OSBuilder by Barin to change the pagepool, its very simple, in one-click button. Also I can change the compression in this utility.
I don't know how to make an img file, besides nb0 more safely for flashing because it doesn't contain a bootloader. I prefer exactly nb0 format.
In any case I don't plan to develope my firmware work, because this one satisfied me completely.
Nice cook, congratulations!
Two things:
- Page pool 5 megs not 4
- In default ROMs there are 3 partitions:
1: BOOT-UL
2: XIP
3: IMGFS
In this ROM BOOT-UL partition's missing. Does it have any impact on system? What this partition for?
Lacerta 1973 said:
Nice cook, congratulations!
Two things:
- Page pool 5 megs not 4
- In default ROMs there are 3 partitions:
1: BOOT-UL
2: XIP
3: IMGFS
In this ROM BOOT-UL partition's missing. Does it have any impact on system? What this partition for?
Click to expand...
Click to collapse
This partition would normally be used as the layer for upgrading system packages over the air. Removing it would just free up some extra space in imgfs.
Ah, I think I see now.
I unpacked the ROM file to modify page pool size and perhaps to change the russian language hard boot message screen in ROM ( anyway It's cool. ).
But I Could not rebuild because the OS builder missed some SYS files. With a 6.0 factory ROM the rebuilding runs smoothly. There is a connection between these SYS files and the missing partition. Am I right?
( Now I'm just curious how Greymen could build the ROM first time? )
Lacerta 1973 I just cooked the rom by using OS Builder - the utilite made by Barin. It has deleted rgu files during the cooking that's why you can't rebuild that rom.
I see. Thanks for the answer!
I use this cook for months, and I've find only two bugs in it. I share, maybe You're interested.
In one case my A696 began to stop rebooting. After restart, reset or battery removing it did not step forward on blue asus welcome screen. Hard reset did not even cured the problem. Finally I re-wrote ROM with usbloader, that was the solution.
My second notice is that WM GPS manager is not so stable; I experienced frequent crashes when navigation software ( Navitel ) is connected to GPS API. But WM virtual port works well.