I have a sprint htc vogue and am currently trying to load the Alltel released rom on it, it gives me a invalid vendor error , so i downloaded another rom that dives me an connection error, I have this green blue red white bootleader screen. My understanding is to pull battery then try again, however it keeps giving me that connectoion error. it allows me to try to start the connection. is there something that i can do the the alltel ROM or the phone? Thanks in Advance!
Related
This is the first time I've messed with this phone I've flashed many different models in the passed but this is the only one that is giving me issues and the worst part is that its not mine so any hell i will greatly appreciate it.
Here is what i did read what ever i can to get more accustomed to this phone. and searched everywhere to help me figure out what i can do.
So i flashed the unlocker. Coke 2.31
after i did that i flashed nfsfan's 1.5 rom using usb cable.
no i cant get into the operating system at all it hangs at the vzw splash screen.
Is there a way to get this phone back to normal? i cannot connect thru activesync and when i tried to reflash using sd card it shows the loading screen for a split secon then goes back to the bootloader.
Please help its my bros phone i need it up and running asap.
Thank you
This post helped quite a bit
ArcaneMagus said:
Just thought that I would post what happened to my phone and the steps that eventually recovered it in case it helps somebody else:
My phone was stuck with "No Radio" on the boot loader screen and the SPL as "SPL-2.31.CoKe", but none of the 3.x ROMs would flash properly that I tried. So here are the steps that eventually recovered it (mostly...):
1.) I installed the ROM above from the tri-color screen (power+camera+reset). I still had no radio, but it was letting me past this and booting up to WM. http://forum.xda-developers.com/showthread.php?t=357762
2.) I then re-flashed the 2.31.CoKe boot loader (not sure if this step is necessary but listing what worked...)
3.) I tried to install RUU_Vogue_VZW_WWE_3.14.605.1_Radio_3.37.78_Ship.exe but it failed at 10% restarting to RUUNBH screen and the installer gave me Error [290]: Invalid Command
4.) I then tried to install the latest sprint ROM straight from the HTC site:_Touch by HTC (Sprint)_RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship this looked like it was going to fail at the same part the Verizon rom did as it rebooted at 10% to RUUNBH screen, but the Sprint installer did something (I heard the computer lose and gain connection multiple times) and eventually it went right back and continued on from 11% and finished successfully.
5.) Rebooted and I had a radio now! Rather then risking trying to install the Verizon ROM again I went straight to the custom ROM I had originally started out with: NFSFAN 6.5 V6 which is working fine for me, except the GPS which is what started out my adventure of the last 3 days...
Just a note: for all flashes except the final one I simply waited till it was at the "Tap the screen..." stage till flashing. I never let any ROM but the final one run it's customization.
Click to expand...
Click to collapse
The above method works on a Vogue that is stuck on the bootloader screen with no radio.
Or if you get a rom to install and it stops at a windows screen that says no radio.
the only difference i tried was i didn't use the HTC Official Sprint rom, as i could not find it.
I used this rom.
RUU_Vogue_4350_ALLTEL_WWE_3.10.671.1_RS3.42.30_NV2.02_PRL30031_SHIP.exe
I let all customizations run on the last rom update.
Every time I try to update the hardspl on my phone it works up until its about to install. The progress goes 0 percent on my comp and stays there then the loading icon comes up on my diamond but then it just freezes and disconnects from my computer then gives me error 260. I'm on xp and I have followed all the instructions and its pissing me off.
Error 260
I've had this same problem too.
Plucked up the courage to install unsigned hard SPL Olinex 1.93, so I could just install the 2.03.405.3 official HTC ROM (Orange haven't bothered to release it...).
And then this error 260...
At first I thought I'd bricked my Diamond, but luckily a soft reset brought it back to life.
I've trawled this site, and it doesn't seem like anyone has any solutions to this issue.
So, at the moment, my upgrade process has stalled.
Any advice, gratefully received!
Ok so i just recently got a Verizon XV6900 (Vogue), i tried flashing the NFSFANS wm6.1 and wm6.5 roms but both of these would constantly cause my device to reboot if it wasn't plugged via USB. So i tried reflashing it back to the original 6.1 pro that came on the phone by using the one from the HTC Website, that failed after 31% and i had to recover it. Now the device is just stuck at the screen with the 3 colors with the message
Vogu100
SPL - 2.01.0000
CPLD-3
i have no idea what to do to get out of this, sorry I'm a complete noob and I tried searching but I couldn't find what i was looking for
Any help is appreciated
Your Vogue is not unlocked. Try running the unlocker (.40) again. Once that is done, unlock using the 2.31 unlocker. You should then be ready to flash a custom ROM.
EnZandOutZ said:
Ok so i just recently got a Verizon XV6900 (Vogue), i tried flashing the NFSFANS wm6.1 and wm6.5 roms but both of these would constantly cause my device to reboot if it wasn't plugged via USB. So i tried reflashing it back to the original 6.1 pro that came on the phone by using the one from the HTC Website, that failed after 31% and i had to recover it. Now the device is just stuck at the screen with the 3 colors with the message
Vogu100
SPL - 2.01.0000
CPLD-3
i have no idea what to do to get out of this, sorry I'm a complete noob and I tried searching but I couldn't find what i was looking for
Any help is appreciated
Click to expand...
Click to collapse
just plug it back in and try to reflash the stock ROM. don't open any programs on your computer while you are flashing. i tried to open a media player to listen to music and it froze the RUU. just flash it again it worked for me.
Hi all
OK, my screen alignment on HD is so messed up i went to downgrade my HD HTC (1.56 Olinex -W6.5Miri) back to its original Orange SPL and OS so i can send it back to HTC under warranty.
Foolishly I changed the HSPL first to original stock so it is now a SPL 1.14.000 (no olinex or anything) in bootloader.
I went to then flash ROM to latest Orange HTC OS release from xda (compatible with that SPL) and just got the 262 error.
So, I have a big problem...
1. I cannot flash any ROM - error 262 problem
2. I cannot cook a new HSPL in any way - error 262 problem
3. Ive got green screen and cannot in anyway load SSPL-Manual-TouchHD.zip and then run it (which normally fixes the 262 error)
4. Ive got green screen so my phone doesnt work
5. tried hard reset - now hangs on loading new OS in green screen
Is it bricked? Is there any software I can use to force load HSPL? I figure my aim is to get the phone back to 1.56 / W6.5 and start over again.
Very curious to see if folk out there have any ideas...
Cheers in advance
in addition
am using W7 on pc and have updated drivers for bootloader usb sync
EDIT: I have now moved this post to Blackstone/Blackstone/ thread.
http://forum.xda-developers.com/showthread.php?t=564409&highlight=bricked
Hey guys I'm having trouble updating my HTC desire. IM currently running 1.13 and when i click on HTC software update it'll bring up 1.50 and start downloading. Well after it's done downloading I click on install and it restarts my phone and starts installing. Well about %20 of the way on the progress bar the logo changes on the screen and shows a red phone with a triangle in the middle with an exclamation mark. Well i tried restarting the phone and I even went into recovery and tried clearing the cache. Well that didn't work so i decided to go into recovery from the installation screen and it showed an error that said something about assert failed /system/build.prop does anybody have any idea why this is happening? My phone isn't rooted or anything.
This is the full error message:
assert failed: file_getprop("/system/build.prop", "ro.aa.taskid") == "385463" || file_getprop ("/system/build.prop", "ro.aa.taskid") == "398306"
Installation aborted.
Write host_mode:0 done
might be
It may be a corrupted download I am not 100% sure what directory it downloads it to but you will need to find and delete it and try redownloading
What Phone Model (a5) do you have????
oakleyguy89 said:
Hey guys I'm having trouble updating my HTC desire. IM currently running 1.13 and when i click on HTC software update it'll bring up 1.50 and start downloading. Well after it's done downloading I click on install and it restarts my phone and starts installing. Well about %20 of the way on the progress bar the logo changes on the screen and shows a red phone with a triangle in the middle with an exclamation mark. Well i tried restarting the phone and I even went into recovery and tried clearing the cache. Well that didn't work so i decided to go into recovery from the installation screen and it showed an error that said something about assert failed /system/build.prop does anybody have any idea why this is happening? My phone isn't rooted or anything.
Click to expand...
Click to collapse
I had the same issue on Virgin Mobile USA a5_CHL. go here. http://forum.xda-developers.com/desire-816/general/ruu-t2952058 . Worked for me. Connected my phone with a USB, Flashed the stock recovery with fastboot. rebooted the phone and ran the RUU.exe on my PC. a5_CHL ONLY...
I have the a5 chl. Iended up manually installing which in turn did a data wipe. I Then got upset and decided to just root it and all that jazz.