Develop Bugs

D810 WM6 Upgrade on P3600?

Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks

hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!

No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!

I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.

Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...

Thanks for the replies! Anyone else with a positive experience?

I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.

thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?

Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...

For those who successfully upgraded their P3600 to WM6, what technique did you use?

I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.

PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.

Thanks Thomas,
That's great information!

generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....

I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.

if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.

I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.

Artemis Touch 4.01 Vanilla call problem

Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.

the same
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.

kosiara said:
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
Click to expand...
Click to collapse
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers

Same problem here
Zecanilis said:
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Click to expand...
Click to collapse
Hi Zecanilis,
I encounter the same problem that is described here by user kosiara an Novy
The GSM signal is excellent, but the phone does not work from time to time and when I try to make a call, I get the message "the operation failed". of course nobody can reach me neither... When I do a soft reset everything is back to normal...
This is very anoying and I do not know what to do.
I bought this PDA second hand, with the upgrades already done for me. Since I do not have any personal data or programs on it yet, I wouldn't mind doing a hard reset and installing everything from scratch.
What would you suggest as a stable system OS and ROM versions?
Any help would be much appreciated.
Here are my actual data:
XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.13.0.0
ROM version : Artemis Touch 4.02 WWE
ROM date 4/08/08
Protocol version 4.1.13.52
Model Nr : ARTE 200
WM 6.1 Professional
CE OS 5.2.19199 (Build 19199.1.0.0)
Regards

But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks

Zbootsom said:
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Click to expand...
Click to collapse
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers

Zecanilis said:
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Click to expand...
Click to collapse
Hi, and thanks for your reply.
I am new to this and althought I read many post, I am not sure.
Can I just upgrade the OS Build without flashing a new ROM.?
If Yes, How do I do it...any tutorial?
Thanks

No.
You have to flash a complete new ROM.
Cheers

OK Thanks
Whish me good luck,,,

Good luck and good choose...

!Novy said:
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
Click to expand...
Click to collapse
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.

novy said:
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
Click to expand...
Click to collapse
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.

neilhhardy said:
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
Click to expand...
Click to collapse
Thanks for your answer. Yes, I flashed it twice and I even flashed a factory rom before that. All Artemis Touch roms were fine until 4.01 and 4.02.
So Zecanilis is probably right blaming the OS version for that malfunctions.

New Rom
I have flashed my device using USPL (took me 2 days to setup the program to work with vista drivers). Then I flashed the same ROM I had before (Artemis Touch 4.02 full Red and Black) but with a different OS build. (as Zicanillis advised)
I will use it for a while and let you know if the freezing phone problem has been corrected.
Cheers

One other change that is on my build is page pool.
My page pool is 6 MB, and some Touch and vanilla (included the 4.02 i had) is only 4MB.
In my opinion that could be another issue to test.
My PDA is working just fine now.
Cheers

For me the problem was the OS Build.
I flashed my device with the same 4.02 vanilla but with a different OS buid and the Phoneworks great. Been using for 2 weeks now, never freezes or looses signal.
Cool
Thanks to Zecanillis advice! obrigado !

Urgent Help reduired!!! Strange problem with my brother's Cingular branded 8525!!!

Hi All!
My brother is facing a strange problem with his Cingular branded 8525. Non of the new WM6.1(or even wm6) roms are woking with his phone except the one Build 19949 released by PNT dated 02-06-2008 (CE OS 5.2.19949 Build 19949.1.2.0.PNT.Full.rar) & the official roms for Hermes.
The major problem faced after trying to put any latest roms is that we are not able to see any pictures in any of the application. (e.g today screen, dialer skin, WMP skin, even photos taken from the camera). Top & bottom bar are ok, Os is booting without flash/welcome screens. After flashing /during booting we get a white screen insted of flash screen/welcomescreen.
He has cheked for the bad block using mitty but it dosent show any bad block there.
We will be really grateful if you can suggest any fix/solution for this strage problem.

Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck

Hi, joel32137!
joel32137 said:
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Click to expand...
Click to collapse
Thanks for your promt reply.
Tried re-flashing HardSPL-2.10. Also tried flashing official WM5 rom & is working. I will now try reflashign Hard spl again as suggested by you & then flashing with PDAViet lateset rom. Will come come to you after that with results.
Thanks again.

Hi, joel32137!
joel32137 said:
Try reinstalling HardSPL,afterwards,go to HTC America's website,download and install last official WM5 (yes... WM5) & let us know if WM5 works on your 8525.If it does,install again HardSPL,then try to install aWM6 of your choice.
Good luck
Click to expand...
Click to collapse
I tried exactly what you have suggested, but no luck.
I flashed Hardspl -7 (olipro 2.10) > official wm5 ROM from cingular/Att > Hardspl again > then tried DVH's 19965 Rom
Please help!

Hey,
Don't know what else to tell you other than to try and re-download your DVH's 19965 file,it may be corrupt.As always,go back to WM5,then re-install HardSPL,then try to install your desired WM6.1 flavor of the week.Did you try DVH's 19214 or 20226? Both pretty good roms. I just installed 19214 from 20226 and it is noticebly snappier than 20226.
Good luck ;p
hemendra05 said:
I tried exactly what you have suggested, but no luck.
I flashed Hardspl -7 (olipro 2.10) > official wm5 ROM from cingular/Att > Hardspl again > then tried DVH's 19965 Rom
Please help!
Click to expand...
Click to collapse

My BA freeze (need help)

Hi
It is my chance to thanks every one that contributes to this great forum
My BA freeze, im i dont know what i can do to resolve this issue!
I have my BA (O2 XDA IIs) for a year now, (bought at ebay) when i found this forum, i thought i got my BA alive again with the WM5, but i had a lot of problems with the programs i installed, (tom tom, spb software house and others, became very slow) and some times freeze, i had to perform a hard reset or empty the battery.
So when i had the chance to upgrade to wm6, i didnt think twice. I installed wm6 and try the several rom available:
ROM WM6.1 CE OS 5.2.20226 (Build 20226.1.3.0 PV DVH)
ROM WM6.1 CE OS 5.2.19701 (Build 19701.1.1.0 PV DVH)
ROM WM6.1 CE OS 5.2.19965 (Build 19965.1.2.3 PV DVH)
WM6.1 Pro 19915 rom
WM6.1 Pro 20226 rom
I want to try this one:
WM6.1 Pro 20273 rom
But now my freezing problem became more constant, i install a new rom and after a few hours, my BA freeze, i try dozen soft/hard reset and still dont work, the only way is to let my battery run out, and some how, clean the possible bug that i have.
I try another rom, and get the some issue again! I try with different OS, XP(ActiveSync) and Vista (Windows Mobile Device Center), but still dont resolve my problem.
I readed all the posts that have the some similar problems like mine, but i cant see the solution! My battery is original, but i dont think the battery is the problem.
I LOVE my BA but it is in the drawer , i try several solutions, change the ROM, clean the battery and others, probabily is some procedure that im missing, i dont know!

I dont know if i format the extended ROM i can resolve my problem!
I found this thread http://forum.xda-developers.com/showthread.php?t=241383 about doc repartitioning tool, but im afraided to make it worst!
Can some one give a opinion? Thanks

HELP
Any ideas???

Help on the BA forum is short these days. I recommend you fallow the WM6 upgrade procedure. I think you're on the right track with formatting the extended ROM. Look here and run the wizard. It will give you a good set of instructions to install a WM6 ROM and format your extended ROM in the process.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_Home

Hi
Thanks for the response! I will install the WM6 and report what is going on!

Looking for WWE WM6.5 Naked Rom

Hi,
I'm really looking for a WWE WM6.5 Naked Rom for the P3600 Trinity
Not interested in many apps or fancy menu's (I usually disable any menu pluggins such as QMenu etc.)
All I would like is:-
Plain Boot Loader Maybe with wording such as "P3600 - Trinity"
Calc
Calendar
SMS
FDC Soft Task Manager
RegEdit
CorePlayer (TCPMP)
QuickGPS
TomTom Navigator 7.450
Current System Setup:-
CE OS 5.2.21215 (Build 21215.5.0.0)
Processor - SC32442A-400Mhz
Rom Version: 3.00.707.18
Rom Date: 04/18/09
Radio version: 1.56.70.11
I use a company sim which doesn't allow data in anyway (no MMS / No 3G / No GSM) only through the USB / Wireless / Bluetooth.
The reason I ask is because the rom i'm using seems to have a memory leak, and needs daily rebooting.
I currently use the AthineOS on the TyTnII and quite like it.
I have tried many roms, and although they work reasonably well, I could do with something a little more "personalised"
Many Thanks,
Wayne.
Too scared to cook, not afraid to test and naturally cheeky!
Devices:-
WM 6.5-
HTC TyTn II
HTC Trinity P3600
WM 2003-
HP Ipaq 6340
HP Ipaq 6515 (Beetle)
HP HW2210

Trinity WWE / wm6.5 build 215725 Lite
Try the followed rom
Trinity WWE / wm6.5 build 215725 Lite
thai rom in english
its lite version
link
http://www.mediafire.com/download.php?2irgtzytjgc

just downloading now - thanks!

Just loaded the rom.
Looks quite nice.
seems very stable without any glitches
I will report back, but at the moment it seems stable and fast - even when i install TomTom7

I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank

Hi, I'm gonna try it, and then I'll give my opinion.
Thanks.
Ricky

tudn said:
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Click to expand...
Click to collapse
Did You get install the ROM? Or it was when you were up dating it?

ricky chan said:
Did You get install the ROM? Or it was when you were up dating it?
Click to expand...
Click to collapse
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.

tudn said:
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
Click to expand...
Click to collapse
i assume that you use an official rom or you have flashed official spl.
read this and this

Hi arnooo
I try this rom but camera don't work... you know how?