Develop Bugs

XDA IIs and Bluetooth Problem.

When I turn on Bluetooth on XDA IIs, I got this error message :
"The bluetooth radio radio failed to turn on due to insufficient driver memory available. You must perform a normal reset before you can turn on the bluetooth radio."
Anyone can advise how to resolve this ? Soft reset does not cure the problem. Thanks.

have you upgraded to bluetooth stack version 3900 ???
if you have then im fresh outta ideas, if you havent find this at our FTP site,
ftp://xda-developers.com/
login and password = xda

got the same problem when i installed one of the bluetooth upgrades on its own. then i installed the new rom and everything was fine. not sure where the connection is but thought id share my problem

Problem solved.
By the way, what is the latest version of ROM for XDA2s, and where to get it from ?
Thanks.

So I was wrong.
After upgrading the BT upgrade, things was OK yesterday. But this morning i got the same error again.
Went to ftp://xda-developers.com/ as suggested, can anyone mentioned the filename of the ROM mentioned by thakkergaurav above ?
Thanks.

The latest ROM is 1.40
You can find it here: http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel

Hmmm..... :?
This BT issue is really getting to be NOT FUNNY! :evil:
Running the new ROM 1.40 and BT 3900 I'm now getting the "no sound" problem on the handset and caller cannot hear me on a HS801!
I use the turn on/turn off BT trick or soft re-set and the handset is OK for a couple of hours but the HS801 still does not work even though its OK with my old PocketPC,a nokia and a Motorola V3!
Is there any consistancy with this problem? It seems the different ROMs, Radio Stacks and BT versions are being effected.

Well, emailed the tech support, and all they can say was ...
"There is a ROM upgrade in development which is in the final stages.
We request your patience as we are trying to release the upgrade as soon as possible."
And that was 2 weeks ago.

even my bluetooth is upgraded to 3900,
i get the same error message also..
i cannot believe a 96mb memory is still not enough
i never get this kinda nonsense when i was using the 5450 ipaq
my today plugins was all over the screen and I had never encountered low memory...

I had the same problem but I have a Harrier not a BA so I thought it was related to that and you BA guys wouldn't get it.
Anyway, the solution on the harrier was to
-turn flight mode on
-soft reset
-turn bluetooth on
-turn flight mode off
Hope this helps

Here is a possible solution from wiki:
The ExSenetoR wrote:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Have not tried this myself, but I believe others have had success with it. You may want to save the file somewhere else, in case you want to reinstate it later...
Hope this helps
Chris

I posted this in another thread.
It really does look like a combo of the 1.40 ROM and 1.12 Radio Stack that is causing this problem (in this case, anyway. See sig). After trolling various forums, it seems that both BT build 3900 and 3500 are having the same issues.
IMHO it seems that the Blue Angel is trying to send the call to my HS801 even when BT is not activated.
Has anyone had a good look at the current radio stack? I've tried contacting Broadcom (BT chipset supplier) but it has been 3 weeks with no answer.
I've done the Run_BTTrayCE_10.lnk workaround but this is only a bandaid and I don't really have enough experience to attempt to cook the ROM. Any ideas?

I have a Motorola HS801 as well and I can receive calls just fine but when I make calls the other party can't hear me. I'm giving up on the HS801 - it's a cheapie anyway and I don't know of anyone else who's got it working either. Running BT3900

Phone problem - neither myself or caller can hear anything

Hi!
I have a problem with my QTEK9090. From time to time when either myself or caller calls to my PPC we can not hear anything! When I try to call back immediately the same procedure occurs. The only thing that temporarily solves this is then I do a soft reset of PPC. Until next time.
I have upgraded from original version 1.12.00WWE to 1.22.00WWE and to 1.40.00WWE. I got a beta version from technical support for radioversion (1.13.10) but without any success. I also have got a new SIM card.
Any ideas?

i have the same problems, and the same sys op... and i had applied all patch...grrrrrrrr :evil: :evil: :evil:

Is your BT on? If not turn it on and leave it on.
good luck

Hi!
Thanks for your replies. I will leave the BT on today and check any differences. Have you had the same problem yourself?

Hi!
matrix70 which version are you running? Have you tried different versions? Have you tried to contact technical support or Telia for this problem?

i'm italian and i bought ba in greece. I just have upgraded with 1.40wwe version, applied all patch...but the proble still here...grrr..i discover that it's coming when i try to use ba in fastest mode.. switching from an application to another in a very fast mode, or trying to recall quickly a number that it's busy.

matrix70 from version did you upgrade from, do you remember?

same problem here, i did read in another thread that this is a known problem and can only be solved by moving to wm5.
I have radio version 1.06.02 and will move to 1.11.00 to try my luck

now i have update from 1.40 to 1.42 and the problem it's seem disappeared.... but with this version i can't sync my calendar....wath a lolling problem ....

I have run with BT on for some days and the phone problem is not occured once.
Great to here that problem with phone is solved in next version.

I remember there was a thread a few months ago I think. I had the same problem when I got my IIs last July, but I just turned off the BT and up to now theres no prob..... I havnt upgraded my version yet, I still use the 1.31 coz everythings working fine

Search the forums for Unidirectional Audio patch. This will fix the problem. But you probably do need the 1.40 series ROM.

im having the same issues, anyone know how to fix it up???
sometimes cant make or receive calls till i make soft reset.
thanks in advance.

im running rom 1.40.
couldn't find "Unidirectional Audio patch"
anyone have any idea where can i find it? and if its really fixing this annoy problem
thanks in advance.

Hi!
You can find the patch here http://wiki.xda-developers.com/uploads/PDA2k_UniDirectional_Patch.sa.cab). It didn't help me at all. I still have problem when BT has been activated nextcoming calls I still can't here or the caller can here anything. The only thing that have helped me, from a tip in this forum, is to always have BT activated.
Regards,
Fredrik

Thanks for the answering m8.
I actualy have been experimented these issue with bluetooth off...
just tryed with bluetooth actived all time and seems to be working.. anyway don't like this fix at all .. consuming extra batery to make the phone working properly is ridiculous
i will try out the fix anyway.
Thanks.

there was a pollon here about this a few months back and 76% of the users in this forum experienced this problem to some degree. Never found a proper fix.

how come manufacturer companies havent take notice yet? or iven the supplied the proper fix to this? is a very important issue...
other licenses than Qtek 9090 got the same issue??? pda2k? and the other clones???? know about it???
for the moment i have to say by enabling bluetooth all time as working well so far ...

GSM problems on VPA 3 aka Blue Angel (MDA3)

About for a month, i'm trying to figure out what is wrong with my VPA 3 (BA) GSM, it's always disconnecting and bugging, communicator is ok but the phone is terrible i can't call normaly cause time to time i's disconectting the same thing with incoming calls. I tryed reflashing to 1.12, 13, 13.1, 15 Radio modules it's mostly the same, also changed roms 1.40, Helmi 5.04, Xplode's Aku 5.35, Aku 5.35 WM6 fake ROM, no big differences in phone fuction, it's always bugy! No physical damages to PDA happened, also found that then battery gets down to 55% it's starting to bug, then it's charging looks like no problems with connection. I'm charging with USB sync cable to PC (have no cradle) maybe this is a problem? Also WIFI connection is mosty imposible, i think this is radio problems... Plz suggest any solutions for such bugs? maybe registry tweak or any software for radio stability? or it's hardware prob?
Thank You guys.

I also have described problem. ((

Hmm, i have the same BA, its now 2 years old and i have no hardware probs with it.
Two weeks ago i disassembled my device for cleaning, repaired the stylusholder and the keyboard slide mechanism and cleaned up every contacts with a fiberglas rubber.
Now it look and feels like new
Maybe this could also help you?

Bluetooth problems with Audi UHV Car Kit

Dear xda community,
at the moment I am running Pays 1.20 Rom on my Hermes in connection with an Audi UHV Car Kit.
There some maijor roblems connecting these 2, because after the phone enters sleep mode (normally 3 mins) during call the car kit looes connection. This is extrem annoying and I would be pleased if anyone here has a solution for me.
I definitly can say the problem comes with the suspend mode! There is no problem if the phone enters sleep mode while there is no call.. BT is stable then.
I also tried "Jetware mobile" but this only has effect on its speed nothing to deal with the problem itself.
I also found a programm called ozbt with can keep the pda and bloototh on during an active window, but setting it to the window "phone" it keeps pda alive but after call its not switching back witch means -> huge battery drain!
So if someone has an idea how to set the phone to always on, backlights off but you can see the dialpad during call, and after call back to sleep mode i would be happy.
Greetings,
fire

Same problem, found solution
I used to have the same problem with with some cokeed roms. Then I use the htc official wm6 rom with no problem at all. Now
I am ussing now schap´s 4.30 wwe with the same good results.

I too have had problems with some of the cooked ROMs and my 2006 A4 Bluetooth connectivity when the phone goes to suspend mode. My suggestion is to find another ROM or another version of that ROM.
I can't recall which ROMs gave me this problem, but a flash to a different ROM always solves the problem with the Audi UHV. My current ROM is great for the car!!

I have the same problem with my Skoda Octavia and Pays 1.20. A lot of disconnections. Sometimes it connects and immediatly disconnects. It's the same like with the WM 5 roms.
With the "original" WM 6 rom from T-mobile I don't have these issues.
Do the cooked roms use different stacks or bluetooth drivers?
Regards,
Moritz

stangeek said:
I too have had problems with some of the cooked ROMs and my 2006 A4 Bluetooth connectivity when the phone goes to suspend mode. My suggestion is to find another ROM or another version of that ROM.
I can't recall which ROMs gave me this problem, but a flash to a different ROM always solves the problem with the Audi UHV. My current ROM is great for the car!!
Click to expand...
Click to collapse
ok now I tried the original german rom from HTC, and surprise surprise it works! So the original roms are not that bad after all! Thanks for this tip I got bit frustrated after Shaps 4.30 and Pays 1.20! Thanks for the great Info again.
@ stangeek what version do you use ?

serious bluetooth issues after hard reset,plz help

First and foremost id like to thank all the contributers for their awesome help in regards to my issue
i recently installed tom tom onto my rhodium and realised that the bluetooth had dissapeared completely,as a noob this totally freaked me out so i uninstalled,deleted off memory card and hard reset my device.
i now havea strange issue in regards to my device, they are as follows:
1) the bluetooth is not being picked up by any devices within the area (i can send files to my laptop and other phone but not vise versa, when i search for my rhodium its not being seen!?)
2)when i now plug my rhodium into my lappy using the usb cable, when i go to "my computer" it doesnt see the unit as an external...im lost to why this has happened?
Anyone else had similar issues and any of you experienced users have any advice to help rectify this?
Thank you in advance
(a very frustrated rhodium user)
graph1uk

Try another hard reset. Did you remove your memory card from the device before proceeding with your last reset?

thanks for the advice,tried more than once with out any luck so called vodafone uk about the issue, would love to complain how bad the service was but cant as they were very helpfull and exchanged the unit the following day.
however now i have a brandnew unit which has exactly the same fault, the bluetooth is working fine apart from being discoverable?
not one to throw my hands up in despair i contacted HTC direct based in milton keynes, from what their tech guy told me its a common fault with this unit due to the bluetooth stach being specificly designed for this device, theyre working on the issue and will update asap.....so now what do i do?
anyone know of any bluetooth cabs i could try and install to rectify my issue.
with that thanks graph1uk