Hi Guys want to get my Orange SPV M100 onto T-Mobile, found your site on unlocking Himalayas with XDA Unlock followed the instruction and the software said that it already appears to be unlocked, so I tried my virgin SIM in it and it asks for the unlock code, which was 2040248. Entered the code and it says that its an invalid code.
so and of course it loads windows but wont allow me to use the phone.
anyone got any thoughts?
dont matter found version 2.2 of the xda unlock took works perfect now
Related
Hi!
Well i'm new in this forum. Thanks to the ones who are viewing this.
This is what happened:
I brought 3 Siemens SX56 from the US. 2 locked to AT&T (windows 2002 installed), one locked to T-mobile (windows 2003 installed).
As the bootloader was originally 5.22 for the three of them, I did the typical unlock supplied by XDA DEVELOPERS (replacing the original flash with the XDADEV flash and running xdaunlock.exe)
That worked fine with both AT&T units which are already unlocked.
However the T-mobile one refuses to give me the unlock codes when i open xdaunlock.exe (error getting unlocked codes)
For what i've been reading, this is most likely because win2003 was installed in this one and i heard it's harder to unlock. But that's just what i heard.
Could anyone help me unlocking it?
I really appreciate!
Thanks!
Nicolas.
Ps: you can contact me to [email protected]
:x hi, thanks for xda unlocking software. i can't seem to unlock me xda II. i have the new XDA 2i.
Read:4, ooFF ( o meaning square)
Failed to do magic
search this forum for steps on downgrading ur rom to 2002 or even better is to just load the XDA-Developer rom onto it and it'll unlock it. then after that switch back to your original rom
remember to use xda tools to backup ur original rom on ur computer first!
Reply
Thanks a lot for your response
I already did that. I downloaded the roms from the at&t sx56 and loaded from sd card. The reason i did this is because the xda developers rom wouldn't let me run the upgrade with ppc2003 on it (a usb connection error was displayed)
I installed the 2002 ppc software and after that, i upgraded directly via ActiveSync.
Still i could not get the unlock codes (same error: error getting unlock code).
That's why i need help. Thanks!
interesting havent heard that one before.. have you tried downgrading to another t-mobile 2002 rom and then after that installed xdadev rom? or maybe downgrade the bootloader?
hi
i have same problem as nikoleman
i have a T-mobile pocket pc (i think it is WM2003 beta)
Pw10b1
rom version:4.00.16 ENG T-Mobile
with wallably 5.22 bootloader
i downgrade the bootloader to 5.15 and
the rom to 3.17.03 ENG cooked in kitchen
now infrared is not working and still get error getting unlock code
any help plz
yep
in fact that's the only way it would let me do it.
I backuped rom from the at&t ones and writed it to the t mobile. Then upgraded to XDA DEV special edition and it still throws me the "error getting unlock code" error.
Do you know why might this be?
I have used the unlocking program available here to unlock my Spv M2000 on Orange. It said it was successful then asked for unlock code which i entered as 00000000. It then asks for the service provider unlock code, i have tried the following to no avail: "00000000" "0000" "1111" and leaving the space blank. Can any one help?
I have the exact same problem.
Please help
Exactly same problem here on M2000 on Orange UK.
They've sent it to technical who are no help, am I best to just upload the ROM files to one of these services and just pay for it to be unlocked?????/
Please advise ASAP as I urgently need the PDA!
I don't think a rom update will reset the lock code
Sorted it .... v1.6 of the xda unlock software solves this problem.
I got the same problem on orange m2000. I have tried v1.6 as well but it was still not working. any helps? Cheers!
I did run it three or four times and it said it had failed - but hadn't - when I put the SIM back in it was fine.
Did u mean u have done the unlock without put in a sim card?
Yes,
It had locked itself, so I took the SIM card out so I could get into the file manager and use it just as a pda....
loaded v1.6 across using ActiveSync and ran it 3 times.
Job done!
Thanks mavk,
That way works great. Just got my job done a few minutes ago. Cheers man!
No worries
I have been searching the net and the forums on help how to do this. Most of what I have found is specific for the HTC and T-mobile dash models, but not seen anything for the orange SPV E600.
I have unlocked the phone with Dashv2unlock program I bought, and tried "RUU_Excalibur_SPL-1.11_UpgradeOnly" and then tried "RUU_Excalibur_TMO_US_1.22.531.4_4.1.13.34_02.79.90_Ship"
Both of these give me a INVALID ID error.
I am suspecting my phone has only been SIM-unlocked (I can use my O2 sim card), but not CID-unlocked? I thought these programs do both?? Do I need a separate program to CID unlock?
Is this a problem specific to the orange SPV E600?
What am I doing wrong????
You phone is CID Locked,
Unfortunately, there's still no free way to CID Unlock an Excalibur, CID Unlock your phone here (USD 38.00):
http://www.imei-check.co.uk/
da_mayhem said:
You phone is CID Locked,
Unfortunately, there's still no free way to CID Unlock an Excalibur, CID Unlock your phone here (USD 38.00):
http://www.imei-check.co.uk/
Click to expand...
Click to collapse
original poster said he/she bought the Dashv2unlock program !!! ... which is a free program that works on the "PAID" UNL file for the specific IMEI ...
http://www.imei-check.co.uk/dashunlock.php
therefore ... I think that the unlocking procedure wasn't done correctly ...
just my $0.02
UnicornKaz said:
original poster said he/she bought the Dashv2unlock program !!! ... which is a free program that works on the "PAID" UNL file for the specific IMEI ...
http://www.imei-check.co.uk/dashunlock.php
therefore ... I think that the unlocking procedure wasn't done correctly ...
just my $0.02
Click to expand...
Click to collapse
LOL, that's what i get when i don't get to read and understand the query.
I agree, unlocking procedure wasn't done correctly.
Thanks guys. I actually went through www.imei-check.co.uk before, and as you correctly pointed out I bought a .unl file specific to my IMEI code, went through the screens just like shown on the website but although my phone will now take my O2 sim, it is still giving me an INVALID ID.
Has anyone succesfully done this with an SPV E600??
Is there a step missing somewhere? I read somewhere about having to run the unlocker program twice, which I have tried with no luck still.
Yay it works!
Ok, just to update.
I managed to update my rom to with the "RUU_Excalibur_HTC_RUS_1.24.411.1_4.1.13." rom instead and this was without having to flash a bootloader to begin with.
So if there are any SPV E600 users out there, the above rom works VERY VERY WELL.
i bought this phone and i tryed to unlock it as it is locked to orange with the progrram i found on this site http://forum.xda-developers.com/showthread.php?p=793893 that can unlock many ppcs.but while this prog seemed to work on my previous BA now on this one DOESNTit says the phone is unlocked but when i put the sim card it asks for a sim code to unlock it and when i put the 000000 as it was mentioned here again ,it still doesnt work.so is there any other way to unlock the spv.
Please help me my BA friends
Have a Orange UK branded Desire that I got from Dec 2010
Basically I wanted to join the giffgaff network, but since its Orange branded, I would have to unlock the phone. So I got an unlock code from GSM Liberty for something like £16 in total because the IMEI was new.
I got my friend's Virgin Sim and put it in my phone, and the unlock screen came up as expected. Entered the code that I got..."Network Unlock Sucessfull"
But...I can't get a signal, there is no network and the strange thing is that every time I reboot the phone (or switch to Flight Mode and back) the phone would ask me for the unlock code.
Anyone got any suggestions?
Try the unlock program. It was posted in the forums recently.
nagypapi said:
Try the unlock program. It was posted in the forums recently.
Click to expand...
Click to collapse
Yeah tried that and now its unlocked
I posted the first post just after I tried the unlock program but it didnt work.
Now that I've actually burned the ISO it worked and my phone is now unlocked.